Suco desidratado de caju (Anacardium occidentale L.) por atomização: caracterização físico-química, bioativa e estudo da vida de prateleira do produto

Despite the relatively organized cashew (Anacardium occidentale L.) productive chain and the number of cashew derivatives found in the market, it is estimated that over 90% of the cashew peduncle is wasted. A possible strategy for a better commercial exploitation of this agroindustrial commodity would be the production of spray dried cashew pulp. Thus, this paper approaches the yellow cashew pulp spray drying process and the final product evaluation. Based on that, the shelf life of the spray dried cashew pulp packed in different packaging was evaluated. Drying was conducted in two drying temperatures (140 °C to 150 °C) and two concentrations of Arabic gum (AG, 15% and 25%), which summed four experimental groups. The drying performance was evaluated as well as the physicochemical characteristics (moisture, water activity, total soluble solids, pH, density, solubility, particle diameter, hygroscopicity, degree of caking, color, scanning electronic microscopy and X-ray diffraction), composition (protein, ash, fat and sugars) and bioactive and functional value (total phenolic compounds, carotenoids, ascorbic acid and antioxidant activity) of the final products. Results showed spray drying efficiency higher than 65% for all experiments, mainly for the C4 group (150 °C and 25% AG) which reached efficiency of 93.4%. It was also observed high solubility (94.7% to 97.9%) and the groups with lower hygroscopicity (5.8% and 6.5%) were those with the highest proportion of drying coadjuvant. The particle diameters ranged between 14.7 μm and 30.2 μm and increased with the proportion of AG. When comparing the product before and after spray drying, the drying impact was evident. However, despite the observed losses, dried yellow cashew showed high phenolic concentration (from 235.9 to 380.4 mg GAE eq / 100 g DM), carotenoids between 0.22 and 0.49 mg/100 g DM and remarkable ascorbic acid levels (852.4 to 1346.2 mg/100 g DM), in addition to antioxidant activity ranging from 12.9 to 16.4 μmol TE/ g DM. The shelf life study revealed decreased phenolic content over time associated to a slight water activity increase. Overall, our results unveil the technological and bioactive potential of dried yellow cashew as a functional ingredient to be used in food formulations or as a ready-to-use product. The technological approach presented here can serve as an efficient strategy for a rational use of the cashew apple, avoiding its current underutilization

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

A parentetização: estratégia de construção textual-interativa do chat educacional

Este artigo descreve, sob a Perspectiva Textual-Interativa, tal como definida por Jubran (2006a), a parentetização (JUBRAN, 1996, 2006b) em uma conversação síncrona mediada por computador, voltada para a esfera educacional, escrita em espanhol por participantes brasileiros - o chat educacional. Observamos que a parentetização constitui-se como uma das regularidades dos processos de elaboração textual. Trata-se, portanto, de uma estratégia de construção textual do chat educacional bastante produtiva.

A correção como procedimento de reformulação em chat educacional escrito em espanhol por brasileiros: tipos de operacionalização e marcas

O objetivo deste artigo foi analisar, nas interações realizadas por escrito dentro de um chat educacional, os tipos de operacionalização para o processo da correção - enquanto procedimento de reformulação, de acordo com a Perspectiva Textual-Interativa. O corpus, constituído por 31 sessões e por 17 participantes (1 professor e 16 alunos), mostrou a presença de quatro tipos de operacionalização da correção: autocorreção autoiniciada, autocorreção heteroiniciada, heterocorreção autoiniciada e heterocorreção heteroiniciada. O maior número de ocorrências foi o da autocorreção autoiniciada. Esse resultado sugere que: i) os participantes, nesse contexto, parecem se preocupar em preservar a auto-imagem, já que a correção não era essencial à compreensão do texto; ii) os escreventes conhecem as regras e, por isso, se monitoram; iii) a própria ferramenta chat contribui para a autocorreção autoiniciada; e iv) a preferência pela autocorreção autoiniciada parece evitar que o professor assuma o papel de corretor do curso de língua. Foram identificados, ainda, padrões de reformulação com e sem marcadores inscritos na materialidade do texto.

A formação pós-graduada em ensino de ciências naturais e matemática de docentes do IFRN: implicações na atuação docente

This research part of the educational context of the Federal Rio Grande do Norte, through the resumption of legal frameworks that characterize it as an institution belonging to the Federal Network of Professional Education and Technology Brazilian, with a focus on continued education policies for the servers who work there specifically teachers, especially those who have their work in the Teaching of Natural Science and Mathematics. To do this the cut in an agreement between the IFRN and UFRN PPGECNM through the professional master's degree Teaching of Natural Sciences and Mathematics. This agreement as we have research collaborators 08 master teachers who graduated in the period 2004 to 2010, so we undertook a qualitative and quantitative research aimed to conduct the study in general terms of description and analysis of the impacts caused by the formation of masters IFRN in PPGECNM UFRN, taking into account the production of the same academic (dissertation), his performance in the context of the institution and the historical, social, economic and political aspects involved, and also meet the guidelines of the project at the Observatory in 2008 - MEC / CAPES / BSD-P. We used the theoretical options methodological elements of Comprehensive Interview and multireferentiality, our data collection instrument was the main interview, we also performed the analysis of dissertations by lecturers and teachers featured, from the specific descriptors used in catalogs USP / IFUSP (1992, 1996) and UNICAMP / FE / CEDOC (1998) and by other researchers. In analyzing and understanding the speech of the interviewees were able to identify the implications of teacher education in the school context, the motivation to seek the Master; how was the construction of the object of study of the educational product and its use in teaching practice and intervention, the question of the role of master teachers in the school environment to the post master taking into account changes in professional performance and influence in the working groups, how does the use of research and investigation in the classroom after training and between training and educational quality in the context of IFRN. In reading and analysis of the dissertations were able to identify the main focus and under-explored thematic focus as well as the theoretical methodological references. At the end of the research developed a product that could be used for technical analysis studies and assessment in quantitative terms the results achieved by the master teachers IFRN through his training in PPGECNM UFRN

A desistência de alunos na licenciatura em física no Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN): causas e sugestões para o combate

This dissertation proposes studying the issue of withdrawal undergraduate in physics at the Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN) and collaborate with suggestions for dealing with this problem. The first chapter begins with an overview of two significant problems in the Brazilian educational system: the high dropout rates in degrees in physics and the lack of teachers with specific training in this science. Then, we discuss the relevance of this research to the area of physics teaching, as well as justify its completion as part of a professional master's degree. After, we present a proper definition for the term withdrawal, which is based on the existing problem in the IFRN. And, in the same chapter, we explicitly the focus, the objectives and the methodological aspects of this work. The results obtained in our investigation are presented in next four chapters. In the second chapter of this dissertation, we present: a brief history of the creation of IFRN degree in physics, the functioning of this course and the foundation of classrooms 2004.2 and 2006.1. We also show a kind of map of the withdrawal of the groups investigated (the dropout rate was 84.4% in both groups) and an analysis of the relationship between the curricula of each of them and the number of dropouts. In the third chapter, we display a descriptive statistics of the students which dropout and found that the largest dropout occurred with students who are women, married, parents of one kid; workers, joined with a minimum age of 23 years and completed high school at least 6 years. Then in the fourth chapter, we reveal and discuss the students' reports on the causes of their dropout. From the data presented, we can say that the answer to the question "What was the main reason for your dropout?" Is mainly in personal injury claims: another option for upper-level course and lack of time to devote to the course. In the fifth chapter, we show the results related to teacher s opinions about the phenomenon in question. We detected three main causes for the abandonment, according to teachers: the lack of dedication, the lack of interest and lack of integration in the course. In the sixth and final chapter, we discuss the results and present our conclusion and the proposed report - the product of this dissertation, presented as Annex. This report contains mainly suggestions for curricular and institutional actions that can contribute to reducing the dropout degree in Physics in the IFRN. The main actions suggested are: implementation of the curriculum in disciplines, implementation of programs or actions to combat this poor content of basic training, implementation of specific programs or actions for the student worker, and dissemination of IFRN degree in physics in schools through seminars or workshops

Citologia: uma proposta formativa na EaD - UFRN a partir de concepções alternativas

Learning difficulties can have a direct influence on the teaching-learning process of students by reducing their school performance. One factor that may contribute to this negative influence on learning refers to the presence of alternative conceptions, which may have different origins in the educational process. It is of paramount importance, for teachers, for example, to identify the concepts and the difficulties of their students in order for that knowledge can be able to contribute significantly to improve the teaching and learning process. From the following considerations, the present study (still in progress) aims to investigate aspects related to the concepts and difficulties of graduating students in relation to the contents of Biology. The participants of the research were undergraduate students in Biological Sciences from UFRN, studying by Distance Learning (Educação a Distância). To develop the survey, questionnaires were developed to identify the contents in Biology that these students have more difficulties as well as an interview to raise misconceptions regarding the content of cytology. Another tool developed was a textbook evaluation form, which was applied in conjunction with a questionnaire in workshops (short courses) in order to identify possible errors and mistakes that could jeopardize the process of teaching and learning, such as the importance that these learners assign to textbooks in the educational process. From the data collected, a booklet on the content of cytology was developed as a product. It is expected that it can be applied in classrooms in order to improve the teaching and learning in references to Biology, to minimize, for example, alternative conceptions than can occur related to the theme

A etnomatemática dos trabalhadores das cerâmicas de Russas-Ce e o contexto escolar: delineando recomendações pedagógicas a partir de uma experiência educacional

It is still common among contemporary educational proposals an overemphasis abstraction, to the formalism and symbolism of mathematical knowledge at the expense of the sociocultural aspects of Mathematics. Coming up by questioning some academic mathematical tenets and valuing knowledge developed in different sociocultural contexts within Mathematical Education, the Ethnomatematics is consolidating itself as a research field. Despite its contributions to the educational context, because its philosophical character and the paucity of debates about the subject, the implementation of educational proposals for basic education are scarce. Given this situation, this dissertation comes up with a view to develop an educational intervention in the light of Ethnomathematics in a class of 6th grade of an elementary school from a red ceramic industries workers community, located in a countryside from Russas-CE and from this intervention, to develop a set of pedagogical recommendations aiming basic education teachers. Adopting a perspective of qualitative research, particularly guided by action research, this study used observation, field diary, interviews and activities with students as tools for data collection. It was found that the use of field research as part of teaching and learning favored the placement of students as critical subjects of their own reality . Furthermore, the educational experience culminated in the development of a method of teaching based on a relationship between protocooperational Ethnomatematics and the Resolution of Problems. It is necessary to broaden the debate about the ways in which the Ethnomatematics can contribute to the school context, bringing proposals closer to the reality of basic education teachers in order to help the promotion of an education which values cultural diversity without taking away the students from the access of the academic knowledge

Ambiente de textualização no ensino a distância: o caso do fórum educacional

This research deals with textualization issues present in educational forums in distance learning environment. The research aims to analyze textualization regarding communication practices between tutors and distance learning students. Specifically the research aims to verify if the educational forum is considered pertinent for knowledge construction as well as identify subject´s behavior in e-Proinfo environment. The research also aims to understand the dynamics of the teaching and learning techniques related to the forum´s printed material. This is done in order to acknowledge discourse on behalf of subjects through the presented educational assignments. In order to address the issue, the work dealt with the relations present in distance learning forums, the forms in which the assignments are made, the way social actors interact and how this debate happens in the virtual environment. The research emphasized an educational forum used in a higher education institution at Rio Grande do Norte/Brazil. Thus the research corpus is composed by messages that were posted in the forum in the module called computer material . This module is one of the last in a set of six modules that are part of The Basic Cycle for Media Training promoted by the Center for Distance Learning in a public university at Rio Grande do Norte/Brazil. The research deals with a qualitative type approach in the perspectives of Merriam (1988), Cresswell (1994) and Minayo (1996). In order to achieve this analysis, the research dealt with theoretical landmarks related to distance learning present in (Silva, 2008; Brait, 1993; Sperbe and Wilson, 1986; Marquesi and Elias 2008 as well as Xavier, 2005, amongst others. As for aspects related to media and technological perspectives present in the forum, the research dealt with (Baranov, 1989; Neuner, 1981; Kearsley and Moore, 1996). Textualization was dealt according to (Marcuschi, 2008; Costa Val, 2004) and the conceptions and functions regarding tutors was seen according to (Salgado, 2002). In the conclusion and recommendations it was seen that these discussions present relevant contributions to distance learning and go beyond the practical universe present in electronical interaction. In the final considerations it is pointed out that this research is relevant for areas such as applied linguistics and presents guidelines for those involved in continuous education and aim meaningful knowledge that is coherent with distance learning education

Uso de produto à base de enzima e levedura na dieta de bovinos: digestibilidade dos nutrientes e desempenho em confinamento

Objetivou-se, com este trabalho, avaliar os efeitos da adição de diferentes níveis de enzima mais levedura na dieta de bovinos sobre a digestibilidade aparente dos nutrientes e o desempenho em confinamento, utilizando-se 18 animais machos, mestiços, de origem leiteira, com peso vivo (PV) médio de 190±10 kg e 12 meses de idade, e 27 animais da raça Guzerá com PV médio de 325 kg e idade média de 27 meses. Os níveis de enzima mais levedura foram zero (controle), 5 g de enzima (E) mais 5 g de levedura (L) e 10 g de E mais 5 g de L por animal por dia. Todos os animais receberam a mesma dieta, constituída de 65% de silagem (50% de milho:50% de sorgo) e 35% de concentrado composto de milho (24,6%), farelo de algodão (7,4%), uréia (1,2%), sal mineralizado (0,54%) e calcário (0,86%). Esta dieta apresentava 12,4% de PB; 10,1 MJEM/kg MS e 41,1% de FDN. A adição de enzima mais levedura não alterou o consumo de MS (3,31% do PV ou 126,6 g/kg PV0,75), e CDA da MS (63,0%), PB (68,2%), EE (83,3%), CHOT (61,3%), FDN (47,2%), FDA (43,8%) e valor de NDT (62,8%). O GMD e o CMS diminuíram de forma quadrática e a CA alimentar piorou linearmente, em função dos dias de confinamento. O fornecimento de enzima mais levedura para bovinos de corte não traz benefícios nutricionais ou de desempenho.

Java applets para um software educacional distribuído em eletrônica de potência

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de impacto baseada em rastreabilidade de artefatos para linhas de produto de software

Software Product Line (SPL) consists of a software development paradigm, whose main focus is to identify features common and variability among applications in a specific domain. An LPS is designed to attend all products requirements from its product family. These requirements and LPS may have changes over time due to several factors, such as evolution of product requirements, evolution of the market, evolution of SLP process, evolution of the technologies used to develop the products. To handle these changes, LPS should be modified and evolve in order to not become obsolete, and adapt itself to new requirements. The Changes Impact Analysis is an activity that understand and identify what consequences these changes are cause on LPS. Impact Analysis on LPS may be supported by traceability relationships, which identify relationships between artefacts created during all phases of software development. Despite the solutions of change impact analysis based on traceability for software, there is a lack of solutions for assessing the change impact analysis based on traceability for LPS, since existing solutions do not include estimates specific to the artefacts of LPS. Thus, this paper proposes a process of change impact analysis and an tool for assessing the change impact through traceability of artefacts in LPS. For this purpose, we specified a process of change impact analysis that considers artifacts produced during the development of LPS. We have also implemented a tool which allows estimating and identifying artefacts and products of LPS affected from changes in other products, changes in class, changes in features, changes between releases of LPS and artefacts related to changes in core assets and variability. Finally, the results were evaluated through metrics

Avaliação sistemática de abordagens de derivação de produto

Product derivation tools are responsible for automating the development process of software product lines. The configuration knowledge, which is responsible for mapping the problem space to the solution space, plays a fundamental role on product derivation approaches. Each product derivation approach adopts different strategies and techniques to manage the existing variabilities in code assets. There is a lack of empirical studies to analyze these different approaches. This dissertation has the aim of comparing systematically automatic product derivation approaches through of the development of two different empirical studies. The studies are analyzed under two perspectives: (i) qualitative that analyzes the characteristics of approaches using specific criteria; and (ii) quantitative that quantifies specific properties of product derivation artifacts produced for the different approaches. A set of criteria and metrics are also being proposed with the aim of providing support to the qualitative and quantitative analysis. Two software product lines from the web and mobile application domains are targets of our study

Uma abordagem sistemática para implementação, gerenciamento e customização de testes de linhas de produto de software

Through the adoption of the software product line (SPL) approach, several benefits are achieved when compared to the conventional development processes that are based on creating a single software system at a time. The process of developing a SPL differs from traditional software construction, since it has two essential phases: the domain engineering - when common and variables elements of the SPL are defined and implemented; and the application engineering - when one or more applications (specific products) are derived from the reuse of artifacts created in the domain engineering. The test activity is also fundamental and aims to detect defects in the artifacts produced in SPL development. However, the characteristics of an SPL bring new challenges to this activity that must be considered. Several approaches have been recently proposed for the testing process of product lines, but they have been shown limited and have only provided general guidelines. In addition, there is also a lack of tools to support the variability management and customization of automated case tests for SPLs. In this context, this dissertation has the goal of proposing a systematic approach to software product line testing. The approach offers: (i) automated SPL test strategies to be applied in the domain and application engineering, (ii) explicit guidelines to support the implementation and reuse of automated test cases at the unit, integration and system levels in domain and application engineering; and (iii) tooling support for automating the variability management and customization of test cases. The approach is evaluated through its application in a software product line for web systems. The results of this work have shown that the proposed approach can help the developers to deal with the challenges imposed by the characteristics of SPLs during the testing process

Reqsys-MDD: uma ferramenta para mapeamento entre modelos de features e requisitos em linhas de produto de software

The approach Software Product Line (SPL) has become very promising these days, since it allows the production of customized systems on large scale through product families. For the modeling of these families the Features Model is being widely used, however, it is a model that has low level of detail and not may be sufficient to guide the development team of LPS. Thus, it is recommended add the Features Model to other models representing the system from other perspectives. The goals model PL-AOVgraph can assume this role complementary to the Features Model, since it has a to context oriented language of LPS's, which allows the requirements modeling in detail and identification of crosscutting concerns that may arise as result of variability. In order to insert PL-AOVgraph in development of LPS's, this paper proposes a bi-directional mapping between PL-AOVgraph and Features Model, which will be automated by tool ReqSys-MDD. This tool uses the approach of Model-Driven Development (MDD), which allows the construction of systems from high level models through successive transformations. This enables the integration of ReqSys-MDD with other tools MDD that use their output models as input to other transformations. So it is possible keep consistency among the models involved, avoiding loss of informations on transitions between stages of development