AGENT BASED, DISTRIBUTED CONTROL STRATEGIES AND OPTIMIZATION OF PLUG-IN ELECTRIC VEHICLES ON SMART/MICROGRID ARCHITECTURES

This thesis will present strategies for the use of plug-in electric vehicles on smart and microgrids. MATLAB is used as the design tool for all models and simulations. First, a scenario will be explored using the dispatchable loads of electric vehicles to stabilize a microgrid with a high penetration of renewable power generation. Grid components for a microgrid with 50% photovoltaic solar production will be sized through an optimization routine to maintain storage system, load, and vehicle states over a 24-hour period. The findings of this portion are that the dispatchable loads can be used to guard against unpredictable losses in renewable generation output. Second, the use of distributed control strategies for the charging of electric vehicles utilizing an agent-based approach on a smart grid will be studied. The vehicles are regarded as additional loads to a primary forecasted load and use information transfer with the grid to make their charging decisions. Three lightweight control strategies and their effects on the power grid will be presented. The findings are that the charging behavior and peak loads on the grid can be reduced through the use of distributed control strategies.

A comparison of pixel and object-based land cover classification. A case study of the Asmara region, Eritrea

In this paper we compare the performance of two image classification paradigms (object- and pixel-based) for creating a land cover map of Asmara, the capital of Eritrea and its surrounding areas using a Landsat ETM+ imagery acquired in January 2000. The image classification methods used were maximum likelihood for the pixel-based approach and Bhattacharyya distance for the object-oriented approach available in, respectively, ArcGIS and SPRING software packages. Advantages and limitations of both approaches are presented and discussed. Classifications outputs were assessed using overall accuracy and Kappa indices. Pixel- and object-based classification methods result in an overall accuracy of 78% and 85%, respectively. The Kappa coefficient for pixel- and object-based approaches was 0.74 and 0.82, respectively. Although pixel-based approach is the most commonly used method, assessment and visual interpretation of the results clearly reveal that the object-oriented approach has advantages for this specific case-study.

Servizi Sociali Territoriali e Università: Esempi di Sinergie Possibili per un Percorso di Qualità

Although – or because – social work education in Italy has for some 15 years now been exclusively in the domain of the university the relationship between the academic world and that of practice has been highly tenuous. Research is indeed being conducted by universities, but rarely on issues that are of immediate practice relevance. This means that forms of practice develop and become established habitually which are not checked against rigorous standards of research and that the creation of knowledge at academic level pays scant attention to the practice implications of social changes. This situation has been made even worse by the dwindling resources both in social services and at the level of the universities which means that bureaucratic procedures or imports of specialisations from other disciplines frequently dominate the development of practice instead of a theory-based approach to methodology. This development does not do justice to the actual requirements of Italian society faced with ever increasing post-modern complexity which is reflected also in the nature of social problems because it implies a continuation of a faith in modernity with its idea of technical, clear-cut solutions while social relations have decidedly moved beyond that belief. This discrepancy puts even greater strain on the personnel of welfare agencies and does ultimately not satisfy the ever increasing demands for quality and accountability of services on the part of users and the general public. Social workers badly lack fundamental theoretical reference points which could guide them in their difficult work to arrive at autonomous, situation-specific methodological answers not based on procedures but on analytical knowledge. Thirty years ago, in 1977, a Presidential Decree created the legal basis for the establishment of social service departments at the level of municipalities which created opportunities for the direct involvement of the community in the fight against exclusion. For this potential to be fully utilized it would have required the bringing together of three dimensions, the organizational structure, the opportunities for learning and research in the territory and the contribution by the professional community. As this did not occur social services in Italy still often retain the character of charity which does not concern itself with the actual causes of poverty and exclusion. This in turn affects the relationship with citizens in general who cannot develop trust in those services. Through uncritical processes of interaction Edgar Morin’s dictum manifests itself which is that without resorting to critical reflection on complexity interventions can often have an effect that totally the opposite to the original intention. An important element in setting up a dynamic interchange between academia and practice is the placement on professional social work courses. Here the looping of theory to practice and back to theory etc. can actually take place under the right organizational and conceptual conditions, more so than in abstract, and for practitioners often useless debates about the theory-practice connection. Furthermore, research projects at the University of Florence Social Work Department for instance aim at fostering theoretical reflection at the level of and with the involvement of municipal social service agencies. With a general constructive disposition towards research and some financial investment students were facilitated to undertake social service practice related research for their degree theses for instance in the city of Pistoia. In this way it was also possible to strengthen the confidence and professional identity of social workers as they became aware of the contribution their own discipline can make to practice-relevant research instead of having to move over to disciplines like psychology for those purposes. Examples of this fruitful collaboration were presented at a conference in Pistoia on 25 June 2007. One example is a thesis entitled ‘The object of social work’ and examines the difficult development of definitions of social work and comes to the conclusion that ‘nothing is more practical than a theory’. Another is on coping abilities as a necessary precondition for the utilization of resources supplied by social services in exceptional circumstances. Others deal with the actual sequence of interventions in crisis situations, and one very interestingly looks at time and how it is being constructed often differently by professionals and clients. At the same time as this collaboration on research gathers momentum in the Toscana, supervision is also being demanded more forcefully as complementary to research and with the same aim of profiling more strongly the professional identity of social work. Collaboration between university and social service filed is for mutual benefit. At a time when professional practice is under threat of being defined from the outside through bureaucratic prescriptions a sound grounding in theory is a necessary precondition for competent practice.

Practice Literate Research: Turning the Tables

Researchers complain how difficult it is to get practitioners and policymakers to use research. In contrast, this paper looks at the issues from the perspective of practice, and argues that it is the researcher’s job to become more practice-literate, so that research begins with practice concerns and develops practice-based solutions. The paper explores the relationship between research and practice and suggests that research has insufficiently engaged with the nature of practice and practice knowledge. Using the Salisbury Statement on practice research (Salisbury Statement 2010) the paper offers a definition of practice research and analyses what would be required for an agenda for practice research. Finally the paper proposes five functions for practice research.

Partnership in Practice Research: a Norwegian Experience

This article outlines some of the issues involved in developing partnerships between service users, practitioners and researchers. It discusses these through some experience in Oslo as part of a national level agreement (HUSK) to improve social services in Norway through research and knowledge development. It begins with a review of the main concepts and debates involved in developing collaborative partnerships for practice-based research, particularly in the social services arena. The HUSK program is then described. The article then traces some specific developments and challenges in negotiating partnership relations as discussed by program participants (users, practitioners and researchers) in a series of workshops designed to elicit the issues directly from their experience.

Prediction of residential radon exposure of the whole Swiss population: comparison of model-based predictions with measurement-based predictions

Radon plays an important role for human exposure to natural sources of ionizing radiation. The aim of this article is to compare two approaches to estimate mean radon exposure in the Swiss population: model-based predictions at individual level and measurement-based predictions based on measurements aggregated at municipality level. A nationwide model was used to predict radon levels in each household and for each individual based on the corresponding tectonic unit, building age, building type, soil texture, degree of urbanization, and floor. Measurement-based predictions were carried out within a health impact assessment on residential radon and lung cancer. Mean measured radon levels were corrected for the average floor distribution and weighted with population size of each municipality. Model-based predictions yielded a mean radon exposure of the Swiss population of 84.1 Bq/m(3) . Measurement-based predictions yielded an average exposure of 78 Bq/m(3) . This study demonstrates that the model- and the measurement-based predictions provided similar results. The advantage of the measurement-based approach is its simplicity, which is sufficient for assessing exposure distribution in a population. The model-based approach allows predicting radon levels at specific sites, which is needed in an epidemiological study, and the results do not depend on how the measurement sites have been selected.

Distance-based kriging relying on proxy simulations for inverse conditioning

Let us consider a large set of candidate parameter fields, such as hydraulic conductivity maps, on which we can run an accurate forward flow and transport simulation. We address the issue of rapidly identifying a subset of candidates whose response best match a reference response curve. In order to keep the number of calls to the accurate flow simulator computationally tractable, a recent distance-based approach relying on fast proxy simulations is revisited, and turned into a non-stationary kriging method where the covariance kernel is obtained by combining a classical kernel with the proxy. Once the accurate simulator has been run for an initial subset of parameter fields and a kriging metamodel has been inferred, the predictive distributions of misfits for the remaining parameter fields can be used as a guide to select candidate parameter fields in a sequential way. The proposed algorithm, Proxy-based Kriging for Sequential Inversion (ProKSI), relies on a variant of the Expected Improvement, a popular criterion for kriging-based global optimization. A statistical benchmark of ProKSI’s performances illustrates the efficiency and the robustness of the approach when using different kinds of proxies.

Volcanic forcing for climate modeling: a new microphysics-based data set covering years 1600–present

As the understanding and representation of the impacts of volcanic eruptions on climate have improved in the last decades, uncertainties in the stratospheric aerosol forcing from large eruptions are now linked not only to visible optical depth estimates on a global scale but also to details on the size, latitude and altitude distributions of the stratospheric aerosols. Based on our understanding of these uncertainties, we propose a new model-based approach to generating a volcanic forcing for general circulation model (GCM) and chemistry–climate model (CCM) simulations. This new volcanic forcing, covering the 1600–present period, uses an aerosol microphysical model to provide a realistic, physically consistent treatment of the stratospheric sulfate aerosols. Twenty-six eruptions were modeled individually using the latest available ice cores aerosol mass estimates and historical data on the latitude and date of eruptions. The evolution of aerosol spatial and size distribution after the sulfur dioxide discharge are hence characterized for each volcanic eruption. Large variations are seen in hemispheric partitioning and size distributions in relation to location/date of eruptions and injected SO2 masses. Results for recent eruptions show reasonable agreement with observations. By providing these new estimates of spatial distributions of shortwave and long-wave radiative perturbations, this volcanic forcing may help to better constrain the climate model responses to volcanic eruptions in the 1600–present period. The final data set consists of 3-D values (with constant longitude) of spectrally resolved extinction coefficients, single scattering albedos and asymmetry factors calculated for different wavelength bands upon request. Surface area densities for heterogeneous chemistry are also provided.

Indication and timing of soft tissue augmentation at maxillary and mandibular incisors in orthodontic patients. A systematic review.

OBJECTIVE To assess the indication and timing of soft tissue augmentation for prevention or treatment of gingival recession when a change in the inclination of the incisors is planned during orthodontic treatment. MATERIALS AND METHODS Electronic database searches of literature were performed. The following electronic databases with no restrictions were searched: MEDLINE, EMBASE, Cochrane, and CENTRAL. Two authors performed data extraction independently using data collection forms. RESULTS No randomized controlled trial was identified. Two studies of low-to-moderate level of evidence were included: one of prospective and retrospective data collection and one retrospective study. Both implemented a periodontal intervention before orthodontics. Thus, best timing of soft tissue augmentation could not be assessed. The limited available data from these studies appear to suggest that soft tissue augmentation of bucco-lingual gingival dimensions before orthodontics may yield satisfactory results with respect to the development or progression of gingival recessions. However, the strength of the available evidence is not adequate in order to change or suggest a possible treatment approach in the daily practice based on solid scientific evidence. CONCLUSIONS Despite the clinical experience that soft tissue augmentation of bucco-lingual gingival dimensions before orthodontic treatment may be a clinically viable treatment option in patients considered at risk, this treatment approach is not based on solid scientific evidence. Moreover, the present data do not allow to draw conclusions on the best timing of soft tissue augmentation when a change in the inclination of the incisors is planned during orthodontic treatment and thus, there is a stringent need for randomized controlled trials to clarify these open issues.

Image-based vs. mesh-based statistical appearance models of the human femur: Implications for finite element simulations.

Statistical appearance models have recently been introduced in bone mechanics to investigate bone geometry and mechanical properties in population studies. The establishment of accurate anatomical correspondences is a critical aspect for the construction of reliable models. Depending on the representation of a bone as an image or a mesh, correspondences are detected using image registration or mesh morphing. The objective of this study was to compare image-based and mesh-based statistical appearance models of the femur for finite element (FE) simulations. To this aim, (i) we compared correspondence detection methods on bone surface and in bone volume; (ii) we created an image-based and a mesh-based statistical appearance models from 130 images, which we validated using compactness, representation and generalization, and we analyzed the FE results on 50 recreated bones vs. original bones; (iii) we created 1000 new instances, and we compared the quality of the FE meshes. Results showed that the image-based approach was more accurate in volume correspondence detection and quality of FE meshes, whereas the mesh-based approach was more accurate for surface correspondence detection and model compactness. Based on our results, we recommend the use of image-based statistical appearance models for FE simulations of the femur.

Lake surface water temperatures of European Alpine lakes (1989–2013) based on the Advanced Very High Resolution Radiometer (AVHRR) 1 km data set

Lake water temperature (LWT) is an important driver of lake ecosystems and it has been identified as an indicator of climate change. Consequently, the Global Climate Observing System (GCOS) lists LWT as an essential climate variable. Although for some European lakes long in situ time series of LWT do exist, many lakes are not observed or only on a non-regular basis making these observations insufficient for climate monitoring. Satellite data can provide the information needed. However, only few satellite sensors offer the possibility to analyse time series which cover 25 years or more. The Advanced Very High Resolution Radiometer (AVHRR) is among these and has been flown as a heritage instrument for almost 35 years. It will be carried on for at least ten more years, offering a unique opportunity for satellite-based climate studies. Herein we present a satellite-based lake surface water temperature (LSWT) data set for European water bodies in or near the Alps based on the extensive AVHRR 1 km data record (1989–2013) of the Remote Sensing Research Group at the University of Bern. It has been compiled out of AVHRR/2 (NOAA-07, -09, -11, -14) and AVHRR/3 (NOAA-16, -17, -18, -19 and MetOp-A) data. The high accuracy needed for climate related studies requires careful pre-processing and consideration of the atmospheric state. The LSWT retrieval is based on a simulation-based scheme making use of the Radiative Transfer for TOVS (RTTOV) Version 10 together with ERA-interim reanalysis data from the European Centre for Medium-range Weather Forecasts. The resulting LSWTs were extensively compared with in situ measurements from lakes with various sizes between 14 and 580 km2 and the resulting biases and RMSEs were found to be within the range of −0.5 to 0.6 K and 1.0 to 1.6 K, respectively. The upper limits of the reported errors could be rather attributed to uncertainties in the data comparison between in situ and satellite observations than inaccuracies of the satellite retrieval. An inter-comparison with the standard Moderate-resolution Imaging Spectroradiometer (MODIS) Land Surface Temperature product exhibits RMSEs and biases in the range of 0.6 to 0.9 and −0.5 to 0.2 K, respectively. The cross-platform consistency of the retrieval was found to be within ~ 0.3 K. For one lake, the satellite-derived trend was compared with the trend of in situ measurements and both were found to be similar. Thus, orbital drift is not causing artificial temperature trends in the data set. A comparison with LSWT derived through global sea surface temperature (SST) algorithms shows lower RMSEs and biases for the simulation-based approach. A running project will apply the developed method to retrieve LSWT for all of Europe to derive the climate signal of the last 30 years. The data are available at doi:10.1594/PANGAEA.831007.

Towards a new model of care: integrating mental health, substance use, and somatic care

Although research and clinical interventions for patients with dual disorders have been described since as early as the 1980s, the day-to-day treatment of these patients remains problematic and challenging in many countries. Throughout this book, many approaches and possible pathways have been outlined. Based upon these experiences, some key points can be extracted in order to guide to future developments. (1) New diagnostic approaches are warranted when dealing with patients who have multiple problems, given the limitations of the current categorical systems. (2) Greater emphasis should be placed on secondary prevention and early intervention for children and adolescents at an increased risk of later-life dual disorders. (3) Mental, addiction, and somatic care systems can be integrated, adopting a patient-focused approach to care delivery. (4) Recovery should be taken into consideration when defining treatment intervention and outcome goals. (5) It is important to reduce societal risk factors, such as poverty and early childhood adversity. (6) More resources are needed to provide adequate mental health care in the various countries. The development of European guidance initiatives would provide benefits in many of these areas, making it possible to ensure a more harmonized standard of care for patients with dual disorders.

Carbon-Based Ocean Productivity and Phytoplankton Physiology from Space

Ocean biogeochemical and ecosystem processes are linked by net primary production (NPP) in the ocean's surface layer, where inorganic carbon is fixed by photosynthetic processes. Determinations of NPP are necessarily a function of phytoplankton biomass and its physiological status, but the estimation of these two terms from space has remained an elusive target. Here we present new satellite ocean color observations of phytoplankton carbon (C) and chlorophyll (Chl) biomass and show that derived Chl:C ratios closely follow anticipated physiological dependencies on light, nutrients, and temperature. With this new information, global estimates of phytoplankton growth rates (mu) and carbon-based NPP are made for the first time. Compared to an earlier chlorophyll-based approach, our carbon-based values are considerably higher in tropical oceans, show greater seasonality at middle and high latitudes, and illustrate important differences in the formation and demise of regional algal blooms. This fusion of emerging concepts from the phycological and remote sensing disciplines has the potential to fundamentally change how we model and observe carbon cycling in the global oceans.

Efforts of hospital system wound care teams to reduce hospital acquired pressure ulcers

New reimbursement policies developed by the Centers for Medicare and Medicaid Services (CMS) are revolutionizing the health care landscape in America. The policies focus on clinical quality and patient outcomes. As part of the new policies, certain hospital acquired conditions have been identified by Medicare as "reasonably preventable". Beginning October 1, 2008, Medicare will no longer reimburse hospitals for these conditions developed after admission, pressure ulcers are among the most common of these conditions.^ In this practice-based culminating experience the objective was to provide a practical account of the process of program development, implementation and evaluation in a public health setting. In order to decrease the incidence of pressure ulcers, the program development team of the hospital system developed a comprehensive pressure ulcer prevention program using a "bundled" approach. The pressure ulcer prevention bundle was based on research supported by the Institute for Healthcare Improvement, and addressed key areas of clinical vulnerability for pressure ulcer development. The bundle consisted of clinical processes, policies, forms, and resources designed to proactively identify patients at risk for pressure ulcer development. Each element of the bundle was evaluated to ensure ease of integration into the workflow of nurses and clinical ancillary staff. Continued monitoring of pressure ulcer incidence rates will provide statistical validation of the impact of the prevention bundle. ^

Using intervention mapping to develop a community garden program at the women's home

This culminating experience was a practice based intervention conducted by an organization, utilizing an intervention mapping approach for the program planning. It took place summer 2010 through spring 2011 and included incorporating a community garden into the Gusto wellness program at The Women's Home. This organization offers long-term residential care, and therapeutic services. Literature relating to community gardens and nutrition behavior change was reviewed. Short-term objectives included: 1) Conducting a needs assessment using focus groups, 2) Designing gardening program components based on intervention mapping guidelines, 3) Constructing a garden bed at Midtown Community Garden for use of The Women's Home, 4) Planning and implementing gardening education, and 5) Assessing feasibility of the garden program. The target population included 24 residents living at the residential dormitory of The Women's Home at the time of this project. The major variables are intervention mapping constructs including: 1) Needs assessment, 2) Preparing matrices of change objectives, 3) Selecting theory-informed intervention methods and practical strategies, 4) Producing program components and materials, 5) Planning program adoption, implementation, and sustainability, and 6) Planning for evaluation. The specific focus was lack of access to fresh fruits and vegetables (FV) for this population. Focus group responses revealed interest in community garden participation. Matrices of change were developed for lack of FV access based on performance objectives for behavioral and environmental factors and related determinants and theory. Methods and strategies were developed to implement a community garden and encourage participation. Program components included initiating a garden club, networking activities, creating gardening curriculum, and participating at Midtown Community Garden. Adoption and implementation performance objectives were outlined, and many were carried out. Evaluation questions were designed and outcomes of the garden project were discussed. ^ Outcomes of the project included exposure of garden topics and activities for The Women's Home residents, focus group responses revealing an interest in gardening among this population, gardening program components designed based on intervention mapping steps, and a constructed garden bed that was used for planting vegetables and flowers through fall 2010. Limited resources and budget along with a lack of a residential coordinator at The Women's Home were the main limiting factors for this project. Future garden projects can be developed using the intervention mapping process.^