Speech Graphs Provide a Quantitative Measure of Thought Disorder in Psychosis

Background: Psychosis has various causes, including mania and schizophrenia. Since the differential diagnosis of psychosis is exclusively based on subjective assessments of oral interviews with patients, an objective quantification of the speech disturbances that characterize mania and schizophrenia is in order. In principle, such quantification could be achieved by the analysis of speech graphs. A graph represents a network with nodes connected by edges; in speech graphs, nodes correspond to words and edges correspond to semantic and grammatical relationships. Methodology/Principal Findings: To quantify speech differences related to psychosis, interviews with schizophrenics, manics and normal subjects were recorded and represented as graphs. Manics scored significantly higher than schizophrenics in ten graph measures. Psychopathological symptoms such as logorrhea, poor speech, and flight of thoughts were grasped by the analysis even when verbosity differences were discounted. Binary classifiers based on speech graph measures sorted schizophrenics from manics with up to 93.8% of sensitivity and 93.7% of specificity. In contrast, sorting based on the scores of two standard psychiatric scales (BPRS and PANSS) reached only 62.5% of sensitivity and specificity. Conclusions/Significance: The results demonstrate that alterations of the thought process manifested in the speech of psychotic patients can be objectively measured using graph-theoretical tools, developed to capture specific features of the normal and dysfunctional flow of thought, such as divergence and recurrence. The quantitative analysis of speech graphs is not redundant with standard psychometric scales but rather complementary, as it yields a very accurate sorting of schizophrenics and manics. Overall, the results point to automated psychiatric diagnosis based not on what is said, but on how it is said.

A simple method to measure critical angles for high-sensitivity differential refractometry

A total internal reflection-based differencial refractometer, capable of measuring the real and imaginary parts of the complex refractive index in real time, is presented. The device takes advantage of the phase difference acquired by s- and p-polarized light to generate an easily detectable minimum at the reflected profile. The method allows to sensitively measuring transparent and turbid liquid samples. (C)2012 Optical Society of America

Use of Carr-Purcell pulse sequence with low refocusing flip angle to measure T-1 and T-2 in a single experiment

The Carr-Purcell pulse sequence, with low refocusing flip angle, produces echoes midway between refocusing pulses that decay to a minimum value dependent on T*(2). When the refocusing flip angle was pi/2 (CP90) and tau > T*(2), the signal after the minimum value, increased to reach a steady-state free precession regime (SSFP), composed of a free induction decay signal after each pulse and an echo, before the next pulse. When tau < T*(2), the signal increased from the minimum value to the steady-state regime with a time constant (T*) = 2T(1)T(2)/(T-1 + T-2). identical to the time constant observed in the SSFP sequence, known as the continuous wave free precession (CWFP). The steady-state amplitude obtained with M-cp90 = M0T2/(T-1+T-2) was identical to CWFP. Therefore, this sequence was named CP-CWFP because it is a Carr-Purcell sequence that produces results similar to the CWFP. However, CP-CWFP is a better sequence for measuring the longitudinal and transverse relaxation times in single scan, when the sample exhibits T-1 similar to T-2. Therefore, this sequence can be a useful method in time domain NMR and can be widely used in the agriculture, food and petrochemical industries because those samples tend to have similar relaxation times in low magnetic fields. (C) 2011 Elsevier Inc. All rights reserved.

Exploring the use of local binary patterns as focus measure

[EN]In this work local binary patterns based focus measures are presented. Local binary patterns (LBP) have been introduced in computer vision tasks like texture classification or face recognition. In applications where recognition is based on LBP, a computational saving can be achieved with the use of LBP in the focus measures. The behavior of the proposed measures is studied to test if they fulfill the properties of the focus measures and then a comparison with some well know focus measures is carried out in different scenarios.

Vibration as a method for muscular stimulation

Human reactions to vibration have been extensively investigated in the past. Vibration, as well as whole-body vibration (WBV), has been commonly considered as an occupational hazard for its detrimental effects on human condition and comfort. Although long term exposure to vibrations may produce undesirable side-effects, a great part of the literature is dedicated to the positive effects of WBV when used as method for muscular stimulation and as an exercise intervention. Whole body vibration training (WBVT) aims to mechanically activate muscles by eliciting neuromuscular activity (muscle reflexes) via the use of vibrations delivered to the whole body. The most mentioned mechanism to explain the neuromuscular outcomes of vibration is the elicited neuromuscular activation. Local tendon vibrations induce activity of the muscle spindle Ia fibers, mediated by monosynaptic and polysynaptic pathways: a reflex muscle contraction known as the Tonic Vibration Reflex (TVR) arises in response to such vibratory stimulus. In WBVT mechanical vibrations, in a range from 10 to 80 Hz and peak to peak displacements from 1 to 10 mm, are usually transmitted to the patient body by the use of oscillating platforms. Vibrations are then transferred from the platform to a specific muscle group through the subject body. To customize WBV treatments, surface electromyography (SEMG) signals are often used to reveal the best stimulation frequency for each subject. Use of SEMG concise parameters, such as root mean square values of the recordings, is also a common practice; frequently a preliminary session can take place in order to discover the more appropriate stimulation frequency. Soft tissues act as wobbling masses vibrating in a damped manner in response to mechanical excitation; Muscle Tuning hypothesis suggest that neuromuscular system works to damp the soft tissue oscillation that occurs in response to vibrations; muscles alters their activity to dampen the vibrations, preventing any resonance phenomenon. Muscle response to vibration is however a complex phenomenon as it depends on different parameters, like muscle-tension, muscle or segment-stiffness, amplitude and frequency of the mechanical vibration. Additionally, while in the TVR study the applied vibratory stimulus and the muscle conditions are completely characterised (a known vibration source is applied directly to a stretched/shortened muscle or tendon), in WBV study only the stimulus applied to a distal part of the body is known. Moreover, mechanical response changes in relation to the posture. The transmissibility of vibratory stimulus along the body segment strongly depends on the position held by the subject. The aim of this work was the investigation on the effects that the use of vibrations, in particular the effects of whole body vibrations, may have on muscular activity. A new approach to discover the more appropriate stimulus frequency, by the use of accelerometers, was also explored. Different subjects, not affected by any known neurological or musculoskeletal disorders, were voluntarily involved in the study and gave their informed, written consent to participate. The device used to deliver vibration to the subjects was a vibrating platform. Vibrations impressed by the platform were exclusively vertical; platform displacement was sinusoidal with an intensity (peak-to-peak displacement) set to 1.2 mm and with a frequency ranging from 10 to 80 Hz. All the subjects familiarized with the device and the proper positioning. Two different posture were explored in this study: position 1 - hack squat; position 2 - subject standing on toes with heels raised. SEMG signals from the Rectus Femoris (RF), Vastus Lateralis (VL) and Vastus medialis (VM) were recorded. SEMG signals were amplified using a multi-channel, isolated biomedical signal amplifier The gain was set to 1000 V/V and a band pass filter (-3dB frequency 10 - 500 Hz) was applied; no notch filters were used to suppress line interference. Tiny and lightweight (less than 10 g) three-axial MEMS accelerometers (Freescale semiconductors) were used to measure accelerations of onto patient’s skin, at EMG electrodes level. Accelerations signals provided information related to individuals’ RF, Biceps Femoris (BF) and Gastrocnemius Lateralis (GL) muscle belly oscillation; they were pre-processed in order to exclude influence of gravity. As demonstrated by our results, vibrations generate peculiar, not negligible motion artifact on skin electrodes. Artifact amplitude is generally unpredictable; it appeared in all the quadriceps muscles analysed, but in different amounts. Artifact harmonics extend throughout the EMG spectrum, making classic high-pass filters ineffective; however, their contribution was easy to filter out from the raw EMG signal with a series of sharp notch filters centred at the vibration frequency and its superior harmonics (1.5 Hz wide). However, use of these simple filters prevents the revelation of EMG power potential variation in the mentioned filtered bands. Moreover our experience suggests that the possibility of reducing motion artefact, by using particular electrodes and by accurately preparing the subject’s skin, is not easily viable; even though some small improvements were obtained, it was not possible to substantially decrease the artifact. Anyway, getting rid of those artifacts lead to some true EMG signal loss. Nevertheless, our preliminary results suggest that the use of notch filters at vibration frequency and its harmonics is suitable for motion artifacts filtering. In RF SEMG recordings during vibratory stimulation only a little EMG power increment should be contained in the mentioned filtered bands due to synchronous electromyographic activity of the muscle. Moreover, it is better to remove the artifact that, in our experience, was found to be more than 40% of the total signal power. In summary, many variables have to be taken into account: in addition to amplitude, frequency and duration of vibration treatment, other fundamental variables were found to be subject anatomy, individual physiological condition and subject’s positioning on the platform. Studies on WBV treatments that include surface EMG analysis to asses muscular activity during vibratory stimulation should take into account the presence of motion artifacts. Appropriate filtering of artifacts, to reveal the actual effect on muscle contraction elicited by vibration stimulus, is mandatory. However as a result of our preliminary study, a simple multi-band notch filtering may help to reduce randomness of the results. Muscle tuning hypothesis seemed to be confirmed. Our results suggested that the effects of WBV are linked to the actual muscle motion (displacement). The greater was the muscle belly displacement the higher was found the muscle activity. The maximum muscle activity has been found in correspondence with the local mechanical resonance, suggesting a more effective stimulation at the specific system resonance frequency. Holding the hypothesis that muscle activation is proportional to muscle displacement, treatment optimization could be obtained by simply monitoring local acceleration (resonance). However, our study revealed some short term effects of vibratory stimulus; prolonged studies should be assembled in order to consider the long term effectiveness of these results. Since local stimulus depends on the kinematic chain involved, WBV muscle stimulation has to take into account the transmissibility of the stimulus along the body segment in order to ensure that vibratory stimulation effectively reaches the target muscle. Combination of local resonance and muscle response should also be further investigated to prevent hazards to individuals undergoing WBV treatments.

Measure of Global Specialization and Spatial Clustering for the Identification of "Specialized" Agglomeration

The intensity of regional specialization in specific activities, and conversely, the level of industrial concentration in specific locations, has been used as a complementary evidence for the existence and significance of externalities. Additionally, economists have mainly focused the debate on disentangling the sources of specialization and concentration processes according to three vectors: natural advantages, internal, and external scale economies. The arbitrariness of partitions plays a key role in capturing these effects, while the selection of the partition would have to reflect the actual characteristics of the economy. Thus, the identification of spatial boundaries to measure specialization becomes critical, since most likely the model will be adapted to different scales of distance, and be influenced by different types of externalities or economies of agglomeration, which are based on the mechanisms of interaction with particular requirements of spatial proximity. This work is based on the analysis of the spatial aspect of economic specialization supported by the manufacturing industry case. The main objective is to propose, for discrete and continuous space: i) a measure of global specialization; ii) a local disaggregation of the global measure; and iii) a spatial clustering method for the identification of specialized agglomerations.

Scienza, Tecnica, Politica: Il Problema del Metodo nel Pensiero di Jacopo Aconcio

The aim of this PhD thesis is to study accurately and in depth the figure and the literary production of the intellectual Jacopo Aconcio. This minor author of the 16th century has long been considered a sort of “enigmatic character”, a profile which results from the work of those who, for many centuries, have left his writing to its fate: a story of constant re-readings and equally incessant oversights. This is why it is necessary to re-read Aconcio’s production in its entirety and to devote to it a monographic study. Previous scholars’ interpretations will obviously be considered, but at the same time an effort will be made to go beyond them through the analysis of both published and manuscript sources, in the attempt to attain a deeper understanding of the figure of this man, who was a Christian, a military and hydraulic engineer and a political philosopher,. The title of the thesis was chosen to emphasise how, throughout the three years of the doctorate, my research concentrated in equal measure and with the same degree of importance on all the reflections and activities of Jacopo Aconcio. My object, in fact, was to establish how and to what extent the methodological thinking of the intellectual found application in, and at the same time guided, his theoretical and practical production. I did not mention in the title the author’s religious thinking, which has always been considered by everyone the most original and interesting element of his production, because religion, from the Reformation onwards, was primarily a political question and thus it was treated by almost all the authors involved in the Protestant movement - Aconcio in the first place. Even the remarks concerning the private, intimate sphere of faith have therefore been analysed in this light: only by acknowledging the centrality of the “problem of politics” in Aconcio’s theories, in fact, is it possible to interpret them correctly. This approach proves the truth of the theoretical premise to my research, that is to say the unity and orderliness of the author’s thought: in every field of knowledge, Aconcio applies the rules of the methodus resolutiva, as a means to achieve knowledge and elaborate models of pacific cohabitation in society. Aconcio’s continuous references to method can make his writing pedant and rather complex, but at the same time they allow for a consistent and valid analysis of different disciplines. I have not considered the fact that most of his reflections appear to our eyes as strongly conditioned by the time in which he lived as a limit. To see in him, as some have done, the forerunner of Descartes’ methodological discourse or, conversely, to judge his religious theories as not very modern, is to force the thought of an author who was first and foremost a Christian man of his own time. Aconcio repeats this himself several times in his writings: he wants to provide individuals with the necessary tools to reach a full-fledged scientific knowledge in the various fields, and also to enable them to seek truth incessantly in the religious domain, which is the duty of every human being. The will to find rules, instruments, effective solutions characterizes the whole of the author’s corpus: Aconcio feels he must look for truth in all the arts, aware as he is that anything can become science as long as it is analysed with method. Nevertheless, he remains a man of his own time, a Christian convinced of the existence of God, creator and governor of the world, to whom people must account for their own actions. To neglect this fact in order to construct a “character”, a generic forerunner, but not participant, of whatever philosophical current, is a dangerous and sidetracking operation. In this study, I have highlighted how Aconcio’s arguments only reveal their full meaning when read in the context in which they were born, without depriving them of their originality but also without charging them with meanings they do not possess. Through a historical-doctrinal approach, I have tried to analyse the complex web of theories and events which constitute the substratum of Aconcio’s reflection, in order to trace the correct relations between texts and contexts. The thesis is therefore organised in six chapters, dedicated respectively to Aconcio’s biography, to the methodological question, to the author’s engineering activity, to his historical knowledge and to his religious thinking, followed by a last section concerning his fortune throughout the centuries. The above-mentioned complexity is determined by the special historical moment in which the author lived. On the one hand, thanks to the new union between science and technique, the 16th century produces discoveries and inventions which make available a previously unthinkable number of notions and lead to a “revolution” in the way of studying and teaching the different subjects, which, by producing a new form of intellectual, involved in politics but also aware of scientific-technological issues, will contribute to the subsequent birth of modern science. On the other, the 16th century is ravaged by religious conflicts, which shatter the unity of the Christian world and generate theological-political disputes which will inform the history of European states for many decades. My aim is to show how Aconcio’s multifarious activity is the conscious fruit of this historical and religious situation, as well as the attempt of an answer to the request of a new kind of engagement on the intellectual’s behalf. Plunged in the discussions around methodus, employed in the most important European courts, involved in the abrupt acceleration of technical-scientific activities, and especially concerned by the radical religious reformation brought on by the Protestant movement, Jacopo Aconcio reflects this complex conjunction in his writings, without lacking in order and consistency, differently from what many scholars assume. The object of this work, therefore, is to highlight the unity of the author’s thought, in which science, technique, faith and politics are woven into a combination which, although it may appear illogical and confused, is actually tidy and methodical, and therefore in agreement with Aconcio’s own intentions and with the specific characters of European culture in the Renaissance. This theory is confirmed by the reading of the Ars muniendorum oppidorum, Aconcio’s only work which had been up till now unavailable. I am persuaded that only a methodical reading of Aconcio’s works, without forgetting nor glorifying any single one, respects the author’s will. From De methodo (1558) onwards, all his writings are summae, guides for the reader who wishes to approach the study of the various disciplines. Undoubtedly, Satan’s Stratagems (1565) is something more, not only because of its length, but because it deals with the author’s main interest: the celebration of doubt and debate as bases on which to build religious tolerance, which is the best method for pacific cohabitation in society. This, however, does not justify the total centrality which the Stratagems have enjoyed for centuries, at the expense of a proper understanding of the author’s will to offer examples of methodological rigour in all sciences. Maybe it is precisely because of the reforming power of Aconcio’s thought that, albeit often forgotten throughout the centuries, he has never ceased to reappear and continues to draw attention, both as a man and as an author. His ideas never stop stimulating the reader’s curiosity and this may ultimately be the best demonstration of their worth, independently from the historical moment in which they come back to the surface.

A bayesian model for mixed responses and skew laten variable to measure HRQoL in children

The aim of the thesi is to formulate a suitable Item Response Theory (IRT) based model to measure HRQoL (as latent variable) using a mixed responses questionnaire and relaxing the hypothesis of normal distributed latent variable. The new model is a combination of two models already presented in literature, that is, a latent trait model for mixed responses and an IRT model for Skew Normal latent variable. It is developed in a Bayesian framework, a Markov chain Monte Carlo procedure is used to generate samples of the posterior distribution of the parameters of interest. The proposed model is test on a questionnaire composed by 5 discrete items and one continuous to measure HRQoL in children, the EQ-5D-Y questionnaire. A large sample of children collected in the schools was used. In comparison with a model for only discrete responses and a model for mixed responses and normal latent variable, the new model has better performances, in term of deviance information criterion (DIC), chain convergences times and precision of the estimates.

Cesare Garboli traduttore di Measure for Measure di Shaskespeare per le compagnie di Luca Ronconi e di Carlo Cecchi

La tesi si occupa della traduzione di Measure for Measure di Shakespeare scritta da Cesare Garboli e pubblicata nel 1992 con Einaudi nella collana «Scrittori tradotti da scrittori». La traduzione fu concepita per il Teatro Stabile di Torino diretto da Luca Ronconi, che debuttò al teatro Carignano nel 1992 e venne successivamente ripresa, con alcune varianti, dalla compagnia di Carlo Cecchi nel 1998, per una nuova messinscena al teatro Garibaldi di Palermo. A partire dagli esiti più recenti dei Translation Studies, il lavoro sviluppa uno studio comparato, dal punto di vista linguistico e sotto il profilo ermeneutico, fra la traduzione di Garboli, il testo originale nelle due edizioni Arden e Cambridge e le traduzioni italiane di Measure for Measure pubblicate nel Novecento. La parte finale della tesi è dedicata alle messinscene a Torino e a Palermo: un confronto per evidenziare gli elementi che in entrambe appartengono alla strutturazione del testo tradotto e i caratteri specifici degli universi di finzione raffigurati dai due registi.

Ergodicity and regularity of invariant measure for branching Markov processes with immigration

In this thesis we consider systems of finitely many particles moving on paths given by a strong Markov process and undergoing branching and reproduction at random times. The branching rate of a particle, its number of offspring and their spatial distribution are allowed to depend on the particle's position and possibly on the configuration of coexisting particles. In addition there is immigration of new particles, with the rate of immigration and the distribution of immigrants possibly depending on the configuration of pre-existing particles as well. In the first two chapters of this work, we concentrate on the case that the joint motion of particles is governed by a diffusion with interacting components. The resulting process of particle configurations was studied by E. Löcherbach (2002, 2004) and is known as a branching diffusion with immigration (BDI). Chapter 1 contains a detailed introduction of the basic model assumptions, in particular an assumption of ergodicity which guarantees that the BDI process is positive Harris recurrent with finite invariant measure on the configuration space. This object and a closely related quantity, namely the invariant occupation measure on the single-particle space, are investigated in Chapter 2 where we study the problem of the existence of Lebesgue-densities with nice regularity properties. For example, it turns out that the existence of a continuous density for the invariant measure depends on the mechanism by which newborn particles are distributed in space, namely whether branching particles reproduce at their death position or their offspring are distributed according to an absolutely continuous transition kernel. In Chapter 3, we assume that the quantities defining the model depend only on the spatial position but not on the configuration of coexisting particles. In this framework (which was considered by Höpfner and Löcherbach (2005) in the special case that branching particles reproduce at their death position), the particle motions are independent, and we can allow for more general Markov processes instead of diffusions. The resulting configuration process is a branching Markov process in the sense introduced by Ikeda, Nagasawa and Watanabe (1968), complemented by an immigration mechanism. Generalizing results obtained by Höpfner and Löcherbach (2005), we give sufficient conditions for ergodicity in the sense of positive recurrence of the configuration process and finiteness of the invariant occupation measure in the case of general particle motions and offspring distributions.

Patterning soft matter for cell culturing

In the search to understand the interaction between cells and their underlying substrates, life sciences are beginning to incorporate micro and nano-technology based tools to probe, measure and improve cellular behavior. In this frame, patterned surfaces provide a platform for highly defined cellular interactions and, in perspective, they offer unique advantages for artificial implants. For these reasons, functionalized materials have recently become a central topic in tissue engineering. Nanotechnology, with its rich toolbox of techniques, can be the leading actor in the materials patterning field. Laser assisted methods, conventional and un-conventional lithography and other patterning techniques, allow the fabrication of functional supports with tunable properties, either physically, or topographically and chemically. Among them, soft lithography provides an effective (and low cost) strategy for manufacturing micro and nanostructures. The main focus of this work is the use of different fabrication approaches aiming at a precise control of cell behavior, adhesion, proliferation and differentiation, through chemically and spatially designed surfaces.

An examination chair to measure internal rotation of the hip in routine settings: a validation study

OBJECTIVE: To determine the performance of a newly developed examination chair as compared with the clinical standard of assessing internal rotation (IR) of the flexed hip with a goniometer. METHODS: The examination chair allowed measurement of IR in a sitting position simultaneously in both hips, with hips and knees flexed 90 degrees, lower legs hanging unsupported and a standardized load of 5 kg applied to both ankles using a bilateral pulley system. Clinical assessment of IR was performed in supine position with hips and knees flexed 90 degrees using a goniometer. Within the framework of a population-based inception cohort study, we calculated inter-observer agreement in two samples of 84 and 64 consecutive, unselected young asymptomatic males using intra-class correlation coefficients (ICC) and determined the correlation between IR assessed with examination chair and clinical assessment. RESULTS: Inter-observer agreement was excellent for the examination chair (ICC right hip, 0.92, 95% confidence interval [CI] 0.89-0.95; ICC left hip, 0.90, 95% CI 0.86-0.94), and considerably higher than that seen with clinical assessment (ICC right hip, 0.65, 95% CI 0.49-0.77; ICC left hip, 0.69, 95% CI 0.54-0.80, P for difference in ICC between examination chair and clinical assessment