A whole body transportable indirect calorimeter for human use in the tropics.

A transportable, whole body indirect calorimeter, designed for use in the tropics, is described. The calorimeter was built to study energy expenditure of people having chronically or acutely low levels of food intake, and it will help to determine energy adaptations made by individuals with restricted food intake. The calorimeter comprises two units: a 27 m3 ventilated chamber connected to an office housing control and monitoring equipment. The system also allows the experimenter to assess the rate of energy expenditure by means of a ventilated hood or a baby respiration chamber. The incoming air flow rate is variable and is typically set at approximately 30 l/min. Carbon dioxide production (VCO2) and oxygen consumption (VO2) are continuously monitored by means of differential gas analysers via a computerized data acquisition unit. Gas production/consumption rates are measured with a delay of 80 s, the complete response to step changes in VCO2 or VO2 consumption being calculated over 15 min using the rate of change terms in the gas exchange equations. The total electrical power required for the whole system is 12 kW. The calorimeter has been functioning for nearly 4 years in a rural village of The Gambia during which ambient temperatures have ranged from 16 to 44 degrees C and dewpoints from -8 to 24 degrees C. The performance and accuracy of the calorimeter were tested using 20 per cent CO2 in N2 infusion and butane burning. Agreement between the theoretical and the measured values was found to be 99 per cent for VO2 and 100 per cent for VCO2 with a precision for both gases of +/- 10 ml/min over a 1-h period.

Evaluation of respiratory and dermal occupational exposures to monoethanolamine during cleaning

Professional cleaning is a basic service occupation with a wide variety of tasks carried out in all kind of different sectors and workplaces by a large workforce. One important risk for cleaning workers is the exposure to chemical substances that are present in cleaning products.Monoethanolamine was found to be often present in cleaning products such as general purpose cleaners, bathroom cleaners, floor cleaners and kitchen cleaners. Monoethanolamine can injure the skin, and exposure to monoethanolamine was associated to asthma even when the air concentrations were low. It is a strong irritant and known to be involved in sensitizing mechanisms. It is very likely that the use of cleaning products containing monoethanolamine gives rise to respiratory and dermal exposures. Therefore there is a need to further investigate the exposures to monoethanolamine for both, respiratory and dermal exposure.The determination of monoethanolamine has traditionally been difficult and analytical methods available are little adapted for occupational exposure assessments. For monoethanolamine air concentrations, a sampling and analytical method was already available and could be used. However, a method to analyses samples for skin exposure assessments as well as samples of skin permeation experiments was missing. Therefore one main objective of this master thesis was to search an already developed and described analytical method for the measurement of monoethanolamine in water solutions, and to set it up in the laboratory. Monoethanolamine was analyzed after a derivatisation reaction with o-pthtaldialdehyde. The derivated fluorescing monoethanolamine was then separated with high performance liquid chromatography and detection took place with a fluorescent detector. The method was found to be suitable for qualitative and quantitative analysis of monoethanolamine. An exposure assessment was conducted in the cleaning sector to measure the respiratory and dermal exposures to monoethanolamine during floor cleaning. Stationary air samples (n=36) were collected in 8 companies and samples for dermal exposures (n=12) were collected in two companies. Air concentrations (Mean = 0.18 mg/m3, Standard Deviation = 0.23 mg/m3, geometric Mean = 0.09 mg/m3, Geometric Standard Deviation = 3.50) detected were mostly below 1/10 of the Swiss 8h time weighted average occupational exposure limit. Factors that influenced the measured monoethanolamine air concentrations were room size, ventilation system and the concentration of monoethanolamine in the cleaning product and amount of monoethanolamine used. Measured skin exposures ranged from 0.6 to 128.4 mg/sample. Some cleaning workers that participated in the skin exposure assessment did not use gloves and had direct contact with the solutions containing the cleaning product and monoethanolamine. During the entire sampling campaign, cleaning workers mostly did not use gloves. Cleaning workers are at risk to be regularly exposed to low air concentrations of monoethanolamine. This exposure may be problematic if a worker suffers from allergic reactions (e.g. Asthma). In that case a substitution of the cleaning product may be a good prevention measure as several different cleaning products are available for similar cleaning tasks. Currently there are no occupational exposure limits to compare the skin exposures that were found. To prevent skin exposures, adaptations of the cleaning techniques and the use of gloves should be considered. The simultaneous skin and airborne exposures might accelerate adverse health effects. Overall the risks caused by exposures to monoethanolamine are considered as low to moderate when the cleaning products are used correctly. Whenever possible, skin exposures should be avoided. Further research should consider especially the dermal exposure routes, as very high exposures might occur by skin contact with cleaning products. Dermatitis but also sensitization might be caused by skin exposures. In addition, new biomedical insights are needed to better understand the risks of the dermal exposure. Therefore skin permeability experiments should be considered.

Rockfall monitoring by Terrestrial Laser Scanning ¿ case study of the basaltic rock face at Castellfollit de la Roca (Catalonia, Spain)

This case study deals with a rock face monitoring in urban areas using a Terrestrial Laser Scanner. The pilot study area is an almost vertical, fifty meter high cliff, on top of which the village of Castellfollit de la Roca is located. Rockfall activity is currently causing a retreat of the rock face, which may endanger the houses located at its edge. TLS datasets consist of high density 3-D point clouds acquired from five stations, nine times in a time span of 22 months (from March 2006 to January 2008). The change detection, i.e. rockfalls, was performed through a sequential comparison of datasets. Two types of mass movement were detected in the monitoring period: (a) detachment of single basaltic columns, with magnitudes below 1.5 m3 and (b) detachment of groups of columns, with magnitudes of 1.5 to 150 m3. Furthermore, the historical record revealed (c) the occurrence of slab failures with magnitudes higher than 150 m3. Displacements of a likely slab failure were measured, suggesting an apparent stationary stage. Even failures are clearly episodic, our results, together with the study of the historical record, enabled us to estimate a mean detachment of material from 46 to 91.5 m3 year¿1. The application of TLS considerably improved our understanding of rockfall phenomena in the study area.

6.2

Airborne particles can come from a variety of sources and contain variable chemical constituents. Some particles are formed by natural processes, such as volcanoes, erosion, sea spray, and forest fires, while other are formed by anthropogenic processes, such as industrial- and motor vehicle-related combustion, road-related wear, and mining. In general, larger particles (those greater than 2.5 μm) are formed by mechanical processes, while those less than 2.5 μm are formed by combustion processes. The chemical composition of particles is highly influenced by the source: for combustion-related particles, factors such as temperature of combustion, fuel type, and presence of oxygen or other gases can also have a large impact on PM composition. These differences can often be observed at a regional level, such as the greater sulphate-composition of PM in regions that burn coal for electricity production (which contains sulphur) versus regions that do not. Most countries maintain air monitoring networks, and studies based on the resulting data are the most common basis for epidemiology studies on the health effects of PM. Data from these monitoring stations can be used to evaluate the relationship between community-level exposure to ambient particles and health outcomes (i.e., morbidity or mortality from various causes). Respiratory and cardiovascular outcomes are the most commonly assessed, although studies have also considered other related specific outcomes such as diabetes and congenital heart disease. The data on particle characteristics is usually not very detailed and most often includes some combination of PM2.5, PM10, sulphate, and NO2. Other descriptors that are less commonly found include particle number (ultrafine particles), metal components of PM, local traffic intensity, and EC/OC. Measures of association are usually reported per 10 μg/m3 or interquartile range increase in pollutant concentration. As the exposure data are taken from regional monitoring stations, the measurements are not representative of an individual's exposure. Particle size is an important descriptor for understanding where in the human respiratory system the particles will deposit: as a general rule, smaller particles penetrate to deeper regions of the lungs. Initial studies on the health effects of particulate matter focused on mass of the particles, including either all particles (often termed total suspended particulate or TSP) or PM10 (all particles with an aerodynamic diameter less than 10 μm). More recently, studies have considered both PM10 and PM2.5, with the latter corresponding more directly to combustion-related processes. UFPs are a dominant source of particles in terms of PNC, yet are negligible in terms of mass. Very few epidemiology studies have measured the effect of UFPs on health; however, the numbers of studies on this topic are increasing. In addition to size, chemical composition is of importance when understanding the toxicity of particles. Some studies consider the composition of particles in addition to mass; however this is not common, in part due the cost and labour involved in such analyses.

Naudan lietelannan käsittelymenetelmien taloudellinen vertailu

Maataloudessa syntyvä lanta on arvokas lannoite ja maanparannusaine, jonka käsittelystä aiheutuu sekä kustannuksia että ympäristövaikutuksia. Muita haasteita ovat esimerkiksi lannan mikrobit, lannan levitykseen soveltuvan ajankohdan lyhyys, lannan ravinteiden sovittaminen kasvien tarpeisiin ja lannan ravinteiden määrä suhteessa levityskelpoisen peltoalan määrään. Tutkimuksen tavoitteena oli tunnistaa naudan lietelannan käsittelyketjuihin liittyvät kustannukset ja osoittaa eri käsittelyketjujen kustannusten eroavaisuudet. Tavoitteena oli myös tunnistaa ja osoittaa käsittelyketjujen laadulliset erot. Kustannukset selvitettiin kustannuslaskelmin ja laadulliset erot SWOT-menetelmällä. Tutkimuksen kohteeksi valittiin 6 tilakokoluokkaa ja käsittelyketjuiksi lietelanta-, kompostointi- ja mädätysketju. Tutkimuksessa alhaisimmat kustannukset olivat lietelantaketjulla, jonka kustannukset 25 – 250 naudan tilalla olivat 5 200 – 6 600 €/a ja yksikkökustannukset 1 – 9 €/m3. Mädätysketjun kustannukset vastaavissa tilakokoluokissa olivat noin 33 000 – 50 000 €/a ja yksikkökustannukset 8 – 55 €/m3. Kompostointiketjun kustannukset olivat 35 000 – 143 000 €/a ja yksikkökustannukset 24 – 58 €/m3. Lietelantaketjun edullisuus johtui vähäisistä laite- ja rakennusinvestoinneista ja pienistä työmääristä ja kompostointiketjun kalleus suurista tukiaine- ja investointikustannuksista. Käsittelyketjujen asettaminen paremmuusjärjestykseen oli hankalaa. Työn määrä oli pienin lietelantaketjussa ja toiseksi pienin suurilla tiloilla mädätysketjussa. Kompostointiketjulla itse levitykseen kuluva aika oli pienin. Ravinteiden osalta mädätysketju oli parhain ja kompostointiketju huonoin. Ympäristövaikutuksiltaan ja hajuhaitoiltaan kompostointi- ja mädätysketju olivat parhaimmat. Mikrobien osalta parhain oli kompostointiketju.

Haja-asutusalueiden sakokaivolietteiden kalkkistabilointi ja hyötykäyttö maataloudessa

In the sparsely populated areas of Finland there are approximately 350 000 households and 450 000 leisure time residences outside sewer networks. According to the Finnish domestic wastewater act outside sewer networks, the Finnish Government is reducing the environmental load of domestic wastewaters by the year 2017. The law is aimed at restricting the quality of sludge from domestic wastewater purification systems. The wastewater purification systems are complex systems, which often include sedimentation basins. The sedimentation basins remove most of the nutrients from the domestic wastewaters. The Finnish Government has decided that sedimentation basin sludge must be treated before reusing. One possibility is to stabilise domestic sludge with slaked lime and to reuse treated sludge in agriculture. According to this master’s thesis lime stabilisation can be done in sedimentation basins or in decanting tanks. Decanting tanks must be under 100 m3. Dosage of stabilisation is 8,5 kg/m3 of lime. If you are treading sludge that is highly hydrous, you need 13,5 kg/m3 of lime. In stabilisation lime and sludge must be thoroughly mixed. Mixed sludge must be in sedimentation basin at least two hours. If there is evidence that sludge contains salmonella or if it’s decanting tank stabilisation time is 48 hours. Sludge must be mixed at least once during the longer stabilisation time. Lime destroys Esherichia coli and enterococcus concentrations below accepted level. Lime also destroys Salmonella bacterium. After treating, sludge’s can be distributed over a field. You can safely spread lime treated domestic sludge’s about 40 m3/ha. Lime stabilisation can also be used to treat separately and collectively collected domestic wastewaters.

Acúmulo de carbono em Latossolo adubado com dejeto líquido de suínos e cultivado em plantio direto

O objetivo deste trabalho foi estimar taxas de acúmulo de C orgânico em Latossolo Vermelho adubado com adubo solúvel e dejeto líquido de suíno e cultivado em plantio direto. O experimento foi conduzido em Campos Novos, SC, e os seguintes tratamentos foram aplicados anualmente: sem adubação; adubo solúvel; 25 m3 ha-1 de dejeto líquido + adubo solúvel; e doses de 25, 50, 100 e 200 m3 ha-1 de dejeto líquido. Foram determinados: os estoques de C orgânico (CO) na camada de 0-20 cm do solo; a adição de C pela fitomassa dos cultivos e pelo dejeto líquido de suíno; as taxas anuais de fixação de C; e os coeficientes de humificação (k1) e de mineralização (k2) de CO do solo. As taxas de fixação de C real e aparente aumentaram de acordo com as doses de dejeto, tendo variado de 0,6 a 1,7 e de 0,05 a 1,0 Mg ha-1 por ano, respectivamente. Os coeficientes k1 e k2 foram 0,17 e 0,011, respectivamente, enquanto o aporte de C requerido para manter o estoque inicial de CO do solo é de 4,14 Mg ha-1 por ano. O dejeto líquido de suíno aplicado anualmente em Latossolo Vermelho cultivado com a sucessão milho-aveia-preta em plantio direto aumenta o CO do solo em doses de até 200 m3 ha-1.

Sormijatketun rakennesahatavaran lujuuteen vaikuttavat tekijät puun jatkojalostuksessa

Diplomityö tehtiin Stora Enson Kiteen sahalla, tuotantokäytössä olevaa sormijatkoslinjaa tutkien. Tutkimuksen tavoitteena oli selvittää raaka-aineen keskikosteuden, kosteusgradientin, mitallistamishöyläyksen ja liitettävien aihioiden pituuden vaikutus jatketun tuotteen laatuun. Koekappaleita valmistettiin viisi höylättyä ja viisi sahapintaista luokkaa. Luokat valmistettiin eripituisista aihioista, puolen metrin jaolla. Koekappaleiden taivutuslujuus mitattiin nelipistetaivutuksella, standardin EN 408 mukaan. Taivutuskokeen jälkeen kappaleista mitattiin keskikosteus ja sahattiin koepalat kosteusgradientin mittaamiseksi. Koekappaleita valmistettiin yhteensä 37.8 m3. Tutkimuksissa selvisi, että kappaleiden keskikosteuden ja taivutuslujuuden välillä vallitsee heikko positiivinen riippuvuus. Kosteusgradientin ja taivutuslujuuden välillä riippuvuus on selkeämpi, kosteusgradientin kasvaessa myös taivutuslujuus lisääntyy. Tämä selittyy kappaleiden tiheyden vaihtelulla. Tiheämpiin kappaleisiin jää kuivauksessa suurempi kosteusgradientti. Aihioiden mitallistaminen pienentää taivutuslujuuden hajontaa ja vähentää raaka-aineen mittaheittojen aiheuttamia häiriöitä tuotannossa. Aihionpituus vaikuttaa murtumatyyppien jakaumiin ja aihioiden kierouteen. Sopivin aihionpituus on tässä tapauksessa 0.8-1.0 m. Puolet kappaleista murtui liitoksen ulkopuolelta, useimmiten oksan kohdalta. Paras tapa parantaa kappaleiden lujuutta on lujuuslajitella raaka-aine.

Organofosforiyhdisteille (TBEP ja TEHP) altistuminen työpaikoilla

Työssä mitattiin työilman TBEP- ja TEHP-pitoisuuksia siivousalalla (3 kohdetta) ja muovituoteteollisuudessa (2 kohdetta). Pitoisuutta ilmassa verrattiin työntekijöidenbiomonitorointinäytteistä analysoitujen 2-butoksietikkahapon (2-BAA) ja 2-etyyliheksaanihapon (2-EHA) pitoisuuteen. Tavoitteena oli biomonitoroin-timenetelmän soveltuvuuden selvittäminen altistumisen arvioinnissa sekä tarvittavien lisäsuojaus- ja torjunta-tarpeiden selvittäminen. Biomonitorointia sekoittavien tekijöiden (2-butoksietanoli ja 2-etyyli-1-heksanoli) pitoisuus mitattiin työntekijöidenhengitysilmasta kerätystä VOC-näytteestä. OVS-keräimiin kerätyt TBEP- ja TEHP-näytteet uutettiin ultraäänellä sopivalla liuottimella ja analysoitiin kaasukromatografisesti (GC). VOC-näytteet kerättiin Tenax GR ¿adsorbenttiin, irrotettiin keräimestä termodesorptiolla ja analysoitiin GC:lla. Biomonitorointinäytteiden (virtsa) 2-BAA- ja 2-EHA -pitoisuus analysoitiin myös GC:lla. Lattianvahauksen aikana siivoojien hengitysilmasta mitatuissa TBEP-näytteissä pitoisuudet vaihtelivat välillä 70 - 860 ng/m3 sekä VOC-näytteistä 88 %:sta löytyi2-butoksietanolia, jonka pitoisuus vaihteli välillä 3 - 1800 µg/m3. Virtsan 2-BAA:n pitoisuudet vaihtelivat välillä <0,3 - 26 mmol/mol kreatiniinia ollen korkeimmillaan 43 % toimenpiderajasta. Raskaana olevien toimenpideraja ylitettiin 30 % näytteistä. Muovituotetehtaissa TEHP-pitoisuus työntekijöiden hengitysilmassa oli alle määritysrajan (eli < 1 - < 3 ng/m3). Muovituotetehtaissa kerätyistä VOC-näytteistä 16 %:sta löydettiin 2-etyyli-1-heksanolia, jonka pitoisuus vaihteli välillä 90 - 100 µg/m3. Virtsan 2-EHA-pitoisuudet olivat välillä <0,1 - 0,2 mmol/mol kreatiniinia. Tulosten perusteella siivoojat altistuvat TBEP:lle ja 2-butoksietanolille lattianvahauksen yhteydessä, muttaaltistuminen ei ilman pitoisuuksien ja biomonitoroinnin tulosten mukaan aiheutaterveyshaittaa ainakaan yhden mahdollisen metaboliitin 2-BAA:n kautta. Pois lukien raskaana olevat työntekijät, joille 2-butoksietanolia sisältävän vahanpoistotuotteen käsitteleminen aiheuttaa mahdollista terveyshaittaa. Käytetyillä biomonitorointimenetelmillä ei voitu osoittaa altistumista tapahtuneen mitatuilla TBEP:n ja TEHP:n pitoi-suustasoilla. Metaboliareittien varmistamisen jälkeen on mahdollista tutkia toimivampaa menetelmää altistumisen arviointiin biomonitoroinnin avulla. Työntekijöiden suojautuminen niin muovituotetehtaissa kuin siivoustyössäkin mitattujen yhdisteiden osalta oli pääosin riittävää. Ainoastaan raskaana olevien työntekijöiden, jotka siivoustyössään altistuvat 2-butoksietanolille, suojaukseen tulisi kiinnittää huomiota.

Sediment budget monitoring of a debris-flow torrent (French Prealps)

The Manival near Grenoble (French Prealps) is a very active debris-flow torrent equipped with a large sediment trap (25 000 m3) protecting an urbanized alluvial fan from debris-flows. We began monitoring the sediment budget of the catchment controlled by the trap in Spring 2009. Terrestrial laser scanner is used for monitoring topographic changes in a small gully, the main channel, and the sediment trap. In the main channel, 39 cross-sections are surveyed after every event. Three periods of intense geomorphic activity are documented here. The first was induced by a convective storm in August 2009 which triggered a debris-flow that deposited ~1,800 m3 of sediment in the trap. The debris-flow originated in the upper reach of the main channel and our observations showed that sediment outputs were entirely supplied by channel scouring. Hillslope debris-flows were initiated on talus slopes, as revealed by terrestrial LiDAR resurveys; however they were disconnected to the main channel. The second and third periods of geomorphic activity were induced by long duration and low intensity rainfall events in September and October 2009 which generate small flow events with intense bedload transport. These events contribute to recharge the debris-flow channel with sediments by depositing important gravel dunes propagating from headwaters. The total recharge in the torrent subsequent to bedload transport events was estimated at 34% of the sediment erosion induced by the August debris-flow.

Common snook fed in alternate and continuous regimens with diet supplemented with Bacillus subtilis probiotic

The objective of this work was to evaluate the addition of Bacillus subtilis probiotic to the feed of common snook (Centropomus undecimalis) fingerlings, in alternate and continuous regimens. Six hundred and sixty fish, with average length of 5.90±0.88 cm and weight of 1.92±0.28 g, were stocked in 12 cages of 1.0 m3, with 55 fish each. The experimental design was completely randomized, with three treatments and four replicates. The treatments consisted of diet with the addition of probiotic, provided in alternate regimen for 7 days and in continuous regimen; besides a control without probiotic in the feed. Zootechnical performance, body composition, immune response, and blood parameters were evaluated. No significant differences were observed in zootechnical performance indexes and in body composition of fish treated with probiotic, when compared to the control. Fish from the alternate regimen showed an increment in respiratory burst and a lower total erythrocyte count than fish from the continuous regimen and the control. Fish from the continuous regimen did not differ from those of the control. The addition of Bacillus subtilis does not increase growth rates of common snook fingerlings; however, it has an immunostimulant action when supplied in alternate regimen.

Harvennusmännyn soveltuvuus liimalevyn raaka-aineeksi

Tutkimuksen tavoitteena oli selvittää harvennusmännynsoveltuvuutta liimalevyn raaka-aineeksi. Lähtökohtana olivat myös väittämät, joiden mukaan mustat oksat ja sydänpuun kiemurtelu aiheuttavat laatuongelmia harvennusmännyn tyviosassa. Tutkimuksen teoreettisessa viitekehyksessä kuvattiin puun koko jalostusketju raaka-aineesta lopputuotteeksi sisältäen kuvaukset harvennuspuun raaka-aineominaisuuksista, sahauksesta ja kuivauksesta sekä liimalevyn valmistuksesta. Tutkimusongelman selvittämiseksi laskettiin leimikosta lankeavan harvennuspuun kokonaiskertymä ja liimalevyn valmistukseen soveltuvan sahatavaran saanto ja laatu sekä niihin vaikuttavat tekijät tuotannon eri vaiheissa. Tutkimustulosten mukaan harvennushakkuun kokonaiskertymästä sahaukseen kelpaavaa raaka-ainetta oli noin puolet. Sahaukseen kelpaamattomien runkojen yleisimmät vikaisuudet olivat muotoviat. Sahauksen keskimääräinen käyttösuhde oli 2,31 k-m3/m3 . Liimalevyn valmistukseen kelpaavaa sahatavaraasaatiin 81,97 %. Liimalevyn valmistukseen kelpaamattomien sahatavarakappaleidensuurimmat vikaisuudet olivat halkeamat ja sydänjuovan kiemurtelu. Mustat oksat olivat pieniä eivätkä ne aiheuttaneet laadun alenemisia harvennuspuun tyviosassa. Tutkimuksen perusteella voidaan tehdä johtopäätös, jonka mukaan harvennusmäntysoveltuu hyvin+ liimalevyn raaka-aineeksi.

Short-term increase in particulate matter blunts nocturnal blood pressure dipping and daytime urinary sodium excretion

Short-term exposure to ambient particulate matter with aerodynamic diameters<10 µm were found to be positively associated with blood pressure. Yet, little information exists regarding the association between particles and circadian rhythm of blood pressure. Hence, we analyzed the association of exposure to particulate matter with aerodynamic diameters<10 µm on the day of examination and ≤7 days before with ambulatory blood pressure and with sodium excretion in 359 adults from the general population using multiple linear regression. After controlling for potential confounders, a 10-µg/m3 increase in particulate matter with aerodynamic diameters<10 µm levels was associated with nighttime systolic blood pressure (β=1.32 mm Hg 95% CI, 0.06-2.58 mm Hg at lag 0; P=0.04), nighttime diastolic blood pressure (0.72 mm Hg 95% CI, 0.03-1.42 mm Hg at lag 2; P=0.04), nocturnal systolic blood pressure dipping (-0.96 mm Hg 95% CI, -1.89 to -0.03 mm Hg at lag 0; P=0.044), and daytime urinary sodium excretion (-0.05 log-mmol/min 95% CI, -0.10 to -0.01 log-mmol/min at lag 0; P=0.027) but not with nighttime sodium excretion. The associations with blood pressure rapidly diminished with increasing lag days, and the associations with daytime sodium excretion were maximal with particulate matter with aerodynamic diameters<10 µm in exposures 2 to 5 days before. The associations of short-term increases in particulate matter with aerodynamic diameters<10 µm with higher nighttime blood pressure and blunted systolic blood pressure dipping were preceded by associations with reduced ability of the kidney to excrete sodium during daytime. The underlying mechanism linking air pollution to increased cardiovascular risk may include disturbed circadian rhythms of renal sodium handling and blood pressure.

Fenologia e acúmulo térmico em videiras viníferas na região da Fronteira Oeste do Rio Grande do Sul

Resumo: O objetivo deste trabalho foi avaliar a exigência térmica, obtida por diferentes métodos de cálculo, para caracterizar a fenologia das videiras (Vitis vinifera) 'Cabernet Sauvignon', 'Tannat', 'Ruby Cabernet' e 'Merlot', cultivadas na Fronteira Oeste do Rio Grande do Sul. O desenvolvimento fenológico foi acompanhado durante cinco safras - 2005/2006 a 2009/2010. As temperaturas mínimas e máximas do ar foram coletadas diariamente e foram testados oito métodos de soma térmica: M1.1, M1.2 e M1.3, que utilizaram somente a temperatura base inferior (10°C); M2.1 e M2.2, que consideraram também a temperatura ótima de desenvolvimento de 25°C; e M3.1, M3.2 e M3.3 que, além das anteriores, utilizaram 35°C como temperatura base superior do desenvolvimento. Estes métodos foram comparados pelo erro-padrão das estimativas de soma térmica. O teste SNK foi utilizado para a comparação da exigência térmica entre as cultivares. O método M3.3 foi o que melhor simulou o desenvolvimento em 'Tannat' e 'Merlot' (1.823,1 e 1.780,8 graus-dia respectivamente). No entanto, o menor desvio foi obtido em 'Cabernet Sauvignon' e 'Ruby Cabernet', pelo método M3.1 (1.958,9 e 1.944,8 graus-dia respectivamente). Os métodos que empregaram as três temperaturas cardinais apresentaram maior precisão. 'Tannat' e 'Merlot' são as cultivares de videira que apresentam a menor exigência térmica para completar o ciclo.

Uimahallien vedestä haihtuvat epäpuhtaudet ja niiden leviäminen allastilassa

Uimaveden klooridesinfioinnissa syntyy sivutuotteena haihtuvia ja haitallisia halogeeniyhdisteitä, kuten trihalometaaneja ja triklooriamiinia, jotka voivat heikentää allas-tilan sisäilman laatua merkittävästi. Tämän tutkimuksen tavoitteena oli kartoittaa näiden desinfioinnin sivutuotteiden pitoisuuksia suomalaisissa uimahalleissa sekä selvittää epäpuhtauksien kulkeutumista allastiloissa. Lisäksi pyrittiin löytämään merkittävimmät veden laatu- ja käsittelyparametrit sekä ilmanvaihtotekniset tekijät, jotka vaikuttavat vedestä haihtuvien epäpuhtauksien pitoisuuksiin hallitiloissa. Mittaukset tehtiin kymmenessä eri puolilla Suomea sijaitsevassa uimahallissa. Mittausten perusteella havaittiin, että allastilojen kloroformipitoisuudet vaihtelivat välillä 8,9-84,0 ¿g/m3. Terapia-allasostoilta mitatut pitoisuudet olivat pääallastiloista mitattuja pitoisuuksia suurempia ja aamulla mitattu pitoisuus alhaisempi kuin illalla mitattu. Lisäksi ilmastoiduista valvomoista mitatut pitoisuudet olivat merkittävästi allastilojen pitoisuuksia pienempiä. Triklooriamiininäytteistä suurin osa oli alle määritysrajan. Sisäilman kloroformipitoisuuden havaittiin korreloivan veden lämpötilan sekä ilman kosteuden kanssa. Triklooriamiinille tilastollista analyysiä ei voitu tehdä mm. määritys-rajan alle jääneiden näytteiden suuren osuuden vuoksi. Teknisten kyselyiden ja ilmanvaihtomittausten perusteella todettiin, että uimahallien ilmanvaihto toimii lämmitystarpeen vuoksi sekoittavana ja epäpuhtauksien leviämistä allastilassa ei voida käytännössä katsoen estää. Ilman virtausnopeudet pääaltaiden reunoilla olivat pieniä ja ilman virtauskenttien ei todettu vaikuttavan epäpuhtauksien kulkeutumiseen allastiloissa. Mittauskohteiden vähyydestä ja vedenkäsittelyn hallikohtaisista erityispiirteistä johtuen luotettavia johtopäätöksiä vedenkäsittelymenetelmien vaikutuksesta allasveden ja allastilan ilman laatuun ei pystytty tekemään.