823 resultados para work stress
Resumo:
This paper presents an analysis of the thermomechanical behavior of hollow circular cylinders of functionally graded material (FGM). The solutions are obtained by a novel limiting process that employs the solutions of homogeneous hollow circular cylinders, with no recourse to the basic theory or the equations of non-homogeneous thermoclasticity. Several numerical cases are studied, and conclusions are drawn regarding the general properties of thermal stresses in the FGM cylinder. We conclude that thermal stresses necessarily occur in the FGM cylinder, except in the trivial case of zero temperature. While heat resistance may be improved by sagaciously designing the material composition, careful attention must be paid to the fact that thermal stresses in the FGM cylinder are governed by more factors than are its homogeneous counterparts. The results that are presented here will serve as benchmarks for future related work. (C) 2003 Elsevier Science Ltd. All rights reserved.
Resumo:
Using a computer keyboard with the forearms unsupported has been proposed as a causal factor for neck/shoulder and arm/hand diagnoses. Recent laboratory and field studies have demonstrated that forearm support might be preferable to working in the traditional floating posture. The aim of this study was to determine whether providing forearm Support when using a normal computer workstation would decrease musculoskeletal discomfort in intensive computer users in a call centre. A randomised controlled study (n = 59), of 6 weeks duration was conducted. Thirty participants (Group 1) were allocated to forearm support using the desk surface with the remainder (Group 2) acting as a control group. At 6 weeks, the control group was also set up with forearm support. Both groups were then monitored for another 6 weeks. Questionnaires were used at 1, 6 and 12 weeks to obtain information about discomfort, workstation setup, working posture and comfort. Nine participants (Group 1 n = 6, Group 2 n = 3) withdrew within a week of commencing forearm support either due to discomfort or difficulty in maintaining the posture. At 6 weeks, the group using forearm support generated significantly fewer reports of discomfort in the neck and back, although the difference between the groups was not statistically significant. At 12 weeks, there were fewer reports of neck, back and wrist discomfort when preintervention discomfort was compared with post intervention discomfort. These findings indicate that for the majority of users, forearm support may be preferable to the floating Posture implicit in current guidelines for computer workstation setup. (C) 2004 Elsevier Ltd. All rights reserved.
Resumo:
Objective To describe the attitudes to their work and career of those Australian veterinarians who work with horses. Method Questionnaires were mailed to 866 veterinarians who had been identified as working with horses, and 87% were completed and returned. Data were entered onto Excel spreadsheets, and analysed using the SAS System for Windows. Results The main attractions of veterinary work with horses were the horses themselves and the equine industries, but working outdoors and with rewarding clients, and the satisfaction of successful outcomes were attractions for many. The list of disadvantages was longer, and included unreasonable and disagreeable clients as well as those who provided inadequate facilities, could not control their horses or did not care for them. The physical demands and risks of injury, the amount of time required, low rates of return and difficulties in collecting payment, were other major disadvantages. Some mentioned concerns about litigation, unethical behaviour, and recruiting and retaining veterinarians competent with horses. For many in mixed practice, the difficulties in affording modern equipment, and of developing and maintaining their own competence with horses, was a real concern. More than three-quarters of the respondents reported that their careers had lived up to expectations and that they would become veterinarians again; 70% of equine veterinarians would become an equine veterinarian again. Almost all (93%) of the respondents were either very glad, or 'generally glad though with some misgivings' that they had done the veterinary course. Older veterinarians reported suffering less stress, and being more content with their career, than younger colleagues. Conclusions The advantages of doing veterinary work with horses outweigh the disadvantages for most veterinarians, especially those well advanced in their careers.
Resumo:
Background There is evidence for an adaptive role of the omega -3 fatty acid, docosahexaenoic acid (DHA) during stress. Mechanisms of action may involve regulation of stress mediators, such as the catecholamines and proinflammatory cytokines. Prevention of stress-induced aggression and hostility were demonstrated in a series of clinical trials. This study investigates whether perceived stress is ameliorated by DHA in stressed university staff. Methods Subjects that scored ≥ 17 on the Perceived Stress Scale were randomised into a 6-week pilot intervention study. The diet reactive group was supplemented with 6 g of fish oil containing 1.5 g per day DHA, while the placebo group was supplemented with 6 g a day of olive oil. The groups were compared with each other and a wider cross sectional study population that did not receive either active or placebo intervention. Results There was a significant reduction in perceived stress in both the fish oil and the placebo group from baseline. There was also a significant between-group difference between the fish oil group and the no-treatment controls in the rate of stress reduction (p < 0.05). However, there was not a significant between-group difference between the fish oil and the placebo group, nor the placebo group and the control group. These results are discussed in the context of several methodological limitations. The significant stress reductions in both the fish oil and the placebo group are considered in view of statistical regression, an effect likely to have been exaggerated by the time course of the study, a large placebo effect and the possibility of an active effect from the placebo. Conclusion There were significant differences (p < 0.05) in the fish oil group compared with no-treatment controls. This effect was not demonstrated in the placebo group. As a pilot study, it was not sufficiently powered to find the difference between the fish oil group and the placebo group significant. Further work needs to be undertaken to conclusively demonstrate these data trends. However, the findings from this research support the literature in finding a protective or 'adaptogenic' role for omega-3 fatty acids in stress.
Resumo:
This study examined the sources of stress experienced by occupational therapists and social workers employed in Australian public mental health services and identified the demographic and work-related factors related to stress using a cross-sectional survey design. Participants provided demographic and work-related information and completed the Mental Health Professionals Stress Scale. The overall response rate to the survey was 76.6%, consisting of 196 occupational therapists and 108 social workers. Results indicated that lack of resources, relationships and conflicts with other professionals, workload, and professional self-doubt were correlated with increased stress. Working in case management was associated with stress caused by client-related difficulties, lack of resources, and professional self-doubt. The results of this study suggest that Australian occupational therapists and social workers experience stress, with social workers reporting slightly more overall stress than occupational therapists. Copyright © 2005 Whurr Publishers Ltd.
Resumo:
This work reports on a critical measurement to understand the intergranular stress corrosion cracking (IGSCC) of pipeline steels: the atom probe field ion microscope (APFIM) measurement of the carbon concentration at a grain boundary (GB). The APFIM measurement was related to the microstructure and to IGSCC observations. The APFIM indicated that the GB carbon concentration of X70 was similar to 10 at% or less, which correlated with a high resistance to IGSCC for X70. (C) 2005 Elsevier Ltd. All rights reserved.
Resumo:
The major changes of the transition to adulthood are argued to be stressful, and health-related behaviors such as smoking and physical activity may be adopted, consolidated, or abandoned at this time. On the other hand, research has suggested that the normative transitions of emerging adulthood, although involving considerable change, may be associated with low stress because they are perceived as both positive and normal at this life stage. This article examines relations between the timing and sequencing of life transitions and stress and health-related behaviors, focusing on the transition to young adulthood among Australian women. A total of 853 women aged 22 to 27 provided information about the timing and sequencing of 6 life transitions: moving out of home, stopping full-time education, starting full-time work, having the first live-in relationship, marriage, and motherhood-and stress, smoking, and physical activity. Most had moved out of home, stopped full-time education, and started full-time work, but only 14% had undertaken all 6 transitions. Overall, 70% of participants had made transitions in order Overall, the findings suggest that the relations between timing and sequencing of transitions, and indicators of health, are moderate for smoking, but small for stress and for physical activity. These effects remained after controlling for socioeconomic status of the participants' families of origin. Matching current social norms for the timing and sequencing of life changes may be of less importance for women's well-being than is commonly believed. Although the significant relations between early or out of order transitions and smoking are of concern, the smaller relations with stress and with sedentariness suggest that such transitions may have limited negative consequences, and support the view that individuals are active in choosing the life path that is appropriate for them and their circumstances.
Resumo:
O presente estudo teve por objetivos, levantar o perfil sócio-demográfico e cultural, de auxiliares de enfermagem, avaliar o grau e presença de sintomas de stress, avaliar e descrever reajustamento social tecendo relação entre variáveis relacionadas ao labor e o stress. Participaram desse estudo 126 auxiliares de enfermagem que cursavam técnico em enfermagem. Utilizou-se os instrumentos: a) questionário Sócio-demográfico e cultural; b) Escala de Reajustamento Social de Holmes-Rahe e c) Inventário de Sintomas de Stress de Lipp (ISSL). Os dados foram coletados em salas de aula, de três escolas técnicas da grande São Paulo e esses dados foram tratados estatisticamente pelos testes X² e r Person para as relações entre variáveis, com auxílio do programa SPSS versão 17. Os resultados indicaram uma predominância de pessoas do gênero feminino, casados, com idade mínima de 19 anos e máxima de 56 anos e com práticas religiosas católicas e evangélicas. Desses profissionais (79%) trabalhavam em um só emprego, com experiência na profissão de cinco anos e o setor com maior quantidade de profissionais foi o home care . A maioria dos profissionais exercia suas atividades no horário matutino, e estudava no horário noturno. O estudo indicou que 57,9% apresentaram grau de stress significativo. Dentro deste grau de stress significativo, 41,3% dos profissionais estavam na fase de resistência e 37,3% dos auxiliares com grau de stress significativo, apresentavam predominância de stress de natureza psicológica. Quanto ao reajustamento social, os auxiliares de enfermagem a maioria, que correspondia a 48,4% estava dentro da média, com chances razoáveis de adoecer, ou seja, apresentavam capacidade regular para adaptação aos eventos novos e desconhecidos que ocorrem durante a vida. Os resultados indicaram que os profissionais que apresentaram stress significativo obtiveram pontuação maior (média) na escala de reajustamento social, em comparação aos profissionais que não apresentaram stress, indicando que esses sujeitos tinham maior probabilidade de estarem adoecidos ou virem a adoecer.
Resumo:
O presente trabalho teve como objetivos investigar a presença de manifestações psicossomáticas em estudantes universitários, a partir da identificação e da prevalência de sintomas de ansiedade, depressão e stress entre outros transtornos; identificar sinais e sintomas de ansiedade, depressão e stress em universitários portugueses; e correlacionar os sinais e sintomas entre si. Utilizou-se o método quantitativo descritivo de corte transversal. Como meio de investigação, foram utilizados três instrumentos: O Inventário de Ansiedade Traço-Estado de Spilberber IDATE, a Escala de Ansiedade, Depressão e Stress EADS-21 (DASS) e o Inventário de Sintomas de Stress para Adultos de Lipp ISSL. A amostra resultou em 147 universitários de primeiro ingresso na universidade com idade variando entre 18 e 26 anos da Universidade do Algarve Ualg (Portugal), em seus diversos cursos. Os dados obtidos foram analisados e correlacionados com o auxilio do software estatístico SPSS - Statistical Package for Social Science (SPSS), versão 19.0 para Windows, utilizando a análise estatística descritiva de frequência e média, Teste T de Student e ANOVA. Os resultados apontaram uma amostra em sua maioria de mulheres, solteiras, que saíram da casa dos pais para estudar e que no momento da coleta dos dados não exerciam atividades de trabalho, apenas estudavam. Houve presença de indicadores de ansiedade, depressão e stress, sendo o nível de ansiedade encontrado moderado e vinculado à probabilidade de depressão associada. Em relação a manifestações psicossomáticas, foi identificada uma dificuldade em auto-avaliação da presença destas, porém entendeu-se que há associação de manifestações psicossomáticas em relação aos sintomas de stress, ansiedade e depressão, encontrados. Levantou-se a hipótese de associação desses sintomas com a situação atual de crise econômica que passa a sociedade portuguesa, principalmente no período de coleta desses dados. Assim, verificou-se um possível estado de vulnerabilidade nesta população com alguma dificuldade em se adaptar às novas exigências de vida, necessitando então de medidas preventivas que auxiliem a adaptação e reestruturação do estilo de vida desses estudantes.
Resumo:
A asma é a doença crônica mais freqüente na infância e o stress é considerado um dos agentes desencadeantes e agravantes do broncoespasmo nesses pacientes. O objetivo deste trabalho foi investigar a influência do stress na expressão clínica da asma e sua associação com as crises em crianças. Para verificar a presença de stress, utilizou-se a Escala de Stress Infantil (LIPP E LUCARELLI, 1998) e por meio de um questionário aplicado aos pais, observou-se freqüência de sintomas e crises de asma, as alterações do sono, o absenteísmo escolar, as limitações à prática de atividade física, a freqüência de uso de broncodilatador, as condutas dos pais durante as crises de asma, os fatores associados ao desencadeamento das crises, o poder aquisitivo e o grau de instrução do chefe da família. Observou-se que as crianças com asma estavam mais estressadas que as crianças do grupo controle, principalmente aquelas com maior gravidade da doença. Os resultados indicam que a presença de stress pode intensificar a freqüência de sintomas da asma, a limitação à atividade física, o absenteísmo escolar e as interrupções do sono. O maior tempo de diagnóstico de asma implicou em menor ocorrência de stress, sugerindo a existência de um fator de adaptação à doença. Conclui-se que o stress é um fator importante no desencadeamento e agravamento das crises de asma nas crianças e observa-se a necessidade de maiores pesquisas na aérea para aprofundar os conhecimentos sobre esse assunto.
Resumo:
A study was conducted in the UK, as part of the New Dynamics of Ageing Working Late project, of the journey to work among 1215 older workers (age groups 45-49, 50-55, 56-60 and 60 + ). The aim was to identify problems or concerns that they might have with their commute, strategies that have been adopted to address them, and the role that employers can play to assist them. Follow-up interviews with 36 employees identified many strategies for assisting with the problems of journeys to work, ranging from car share and using public transport to flexible working and working some days from home. Further interviews with a sample of 12 mainly larger companies showed that employers feel a responsibility for their workers’ commute, with some offering schemes to assist them, such as adjusting work shift timings to facilitate easier parking. The research suggests that the journey to work presents difficulties for a significant minority of those aged over 45, including issues with cost, stress, health, fatigue and journey time. It may be possible to reduce the impact of these difficulties on employee decisions to change jobs or retire by assisting them to adopt mitigating strategies. It does not appear that the likelihood of experiencing a problem with the journey to work increases as the employee approaches retirement; therefore, any mitigating strategy is likely to help employees of all ages. These strategies have been disseminated to a wider audience through an online resource at www.workinglate.org.
Resumo:
A number of investigators have studied the application of oscillatory energy to a metal undergoing plastic deformation. Their results have shown that oscillatory stresses reduce both the stress required to initiate plastic deformation and the friction forces between the tool and workpiece. The first two sections in this thesis discuss historically and technically the devolopment of the use of oscillatory energy techniques to aid metal forming with particular reference to wire drawing. The remainder of the thesis discusses the research undertaken to study the effect of applying longitudinal oscillations to wire drawing. Oscillations were supplied from an electric hydraulic vibrator at frequencies in the range 25 to 500 c/s., and drawing tests were performed at drawing speeds up to 50 ft/m. on a 2000 lbf. bull-block. Equipment was designed to measure the drawing force, drawing torque, amplitude of die and drum oscillation and drawing speed. Reasons are given for selecting mild steel, pure and hard aluminium, stainless steel and hard copper as the materials to be drawn, and the experimental procedure and calibration of measuring equipment arc described. Results show that when oscillatory stresses are applied at frequencies within the range investigated : (a) There is no reduction in the maximum drawing load. (b) Using sodium stearate lubricant there is a negligible reduction in the coefficient of friction between the die and wire. (c) Pure aluminium does not absorb sufficient oscillatory energy to ease the movement of dislocations. (d) Hard aluminium is not softened by oscillatory energy accelerating the diffusion process. (e) Hard copper is not cyclically softened. A vibration analysis of the bull-block and wire showed that oscillatory drawiing in this frequency range, is a mechanical process of straining; and unstraining the drawn wire, and is dependent upon the stiffness of the material being drawn and the drawing machine. Directions which further work should take are suggested.
Resumo:
This thesis considers four broad areas:(i) ANALYSIS OF THE STRESS FIELD.(a) research studies, relevant to the British Social Services considering the cultural setting, and the rigor with which they were conducted; (b) models of stress, specifically examining the theoretical soundness and practical application of the Medical, Engineering and Transactional models;(c) organisational models of stress relating specifically to human service organisations.(ii) QUALITATIVE AND QUANTITATIVE RESEARCH METHODOLOGIES.(a) the appropriate application of each respective methodology and the particular usefulness of qualitative research designs; (b) the relevance of understanding the language and terminology associated with the subject area prior to the implementation of survey methods; (iii) FIELDWORK.(a) Phase 1. By use of focus groups, in-depth interviews and diary keeping amongst a small range of teams and managers, the Researcher develops a basic conceptual framework of stress within a Social Services context. In addition a small scale personality inventory was administered to participants.(b) Phase 2. This consisted of three key elements: 6 case studies in which the Researcher implements and appraises the impact of a range of intervention strategies designed to assist teams and their managers in dealing more effectively with stress; the administration of a large scale survey to all the field social work teams within the Social Services Department; an analysis of the user role within the stress process by way of two focus groups.(iv) THEORETICAL DEVELOPMENT.
Resumo:
Hospital employees who work in an environment with zero tolerance to error, face several stressors that may result in psychological, physiological, and behavioural strains, and subsequently, in suboptimal performance. This thesis includes two studies which investigate the stressor-to-strain-to-performance relationships in hospitals. The first study is a cross-sectional, multi-group investigation based on secondary data from 65,142 respondents in 172 acute/specialist UK NHS trusts. This model proposes that senior management leadership predicts social support and job design which, in turn, moderate stressors-to-strains across team structure. The results confirm the model's robustness. Regression analysis provides support for main effects and minimal support for moderation hypotheses. Therefore, based on its conclusions and inherent limitations, study one lays the framework for study two. The second study is a cross-sectional, multilevel investigation of the strain-reducing effects of social environment on externally-rated unit-level performance based on primary data from 1,137 employees in 136 units, in a hospital in Malta. The term "social environment" refers to the prediction of the moderator variables, which is to say, social support and decision latitude/control, by transformational leadership and team climate across hospital units. This study demonstrates that transformational leadership is positively associated with social support, whereas team climate is positively associated with both moderators. At the same time, it identifies a number of moderating effects which social support and decision latitude/control, both separately and together, had on specific stressor-to-strain relationships. The results show significant mediated stressor-to-strain-to-performance relationships. Furthermore, at the higher level, unit-level performance is positively associated with shared unit-level team climate and with unit-level vision, the latter being one of the five sub-dimension of transformational leadership. At the same time, performance is also positively related to both transformational leadership and team climate when the two constructs are tested together. Few studies have linked the buffering effects of the social environment in occupational stress with performance. Therefore, this research strives to make a significant contribution to the occupational stress and performance literature with a focus on hospital practice. Indeed, the study highlights the wide-ranging and far-reaching implications that these findings provide for theory, management, and practice.
Resumo:
The work described in this thesis deals with the development and application of a finite element program for the analysis of several cracked structures. In order to simplify the organisation of the material presented herein, the thesis has been subdivided into two Sections : In the first Section the development of a finite element program for the analysis of two-dimensional problems of plane stress or plane strain is described. The element used in this program is the six-mode isoparametric triangular element which permits the accurate modelling of curved boundary surfaces. Various cases of material aniftropy are included in the derivation of the element stiffness properties. A digital computer program is described and examples of its application are presented. In the second Section, on fracture problems, several cracked configurations are analysed by embedding into the finite element mesh a sub-region, containing the singularities and over which an analytic solution is used. The modifications necessary to augment a standard finite element program, such as that developed in Section I, are discussed and complete programs for each cracked configuration are presented. Several examples are included to demonstrate the accuracy and flexibility of the technique.