Studies on the synthesis of novel PP2A inhibitors and a GPCR detergent

Chapter 1 While targeting kinases in oncology research has been explored extensively, targeting protein phosphatases is currently in its infancy. However, a number of pharmaceutical companies are currently looking to expand their research efforts in this area. PP2A has been shown to down-regulate ERK5, a mitogen-activated protein kinase (MAPK) that has been shown to be important in driving the invasive phenotype of prostate cancer. Fostriecin and its related structural analogues PD 113,270 and 113,271 have been shown to inhibit a mitotic entry checkpoint in cell growth through the potent and selective inhibition of protein phosphatases PP1, PP2A, and PP4 (IC50 of 45 μM, 1.5 nM, and 3 nM respectively). Fostriecin is one of the most selective protein phosphatase inhibitors disclosed to date with a 104 fold selectivity for PP2A/PP4 versus PP1. Unfortunately, fostriecin and its analogues are very unstable, and this instability has effectively prevented them from being used as effective therapeutic leads. The microcystins and nodularins on the other hand, exhibit significant inhibitory activity against PP1 and PP2A (IC50 = 26 pM and 1.8 nM respectively), but their high toxicity has prevented any therapeutic application. Truncation of the ADDA chain from these polypeptides completely attenuates PP inhibitory activity. Simpler analogues incorporating the N-acylated ADDA chain and D-Ala retain moderate activity against PP1 and PP2A (IC50 = 1.0 μM and 0.17 μM respectively). The generation of a new series of fostriecin analogues to further expand its structure-activity relationship is envisaged with a view to creating new more stable PP2A inhibitors. It was hoped that by incorporating some of the more stable structural features of ADDA into fostriecin that stability and activity could be reconciled. With that in mind a series of PP2A inhibitors were synthesised and biologically evaluated. Chapter 2 GPCRs are an important area of research and are the targets of a quarter of the drugs on the market (2005). As a result, GPCRs continue to be at the forefront of research in both small and large drug companies. However one of the difficulties in studying this diverse class of membrane proteins is their tendency to denature in aqueous solution. As a result there is a pressing need to develop new detergents to solubilise, stabilise and crystallise GPCRs in their native form for further study. Cholesterol analogues have been shown to be important for stabilising membrane proteins and preventing their thermal inactivation. In addition the β2-adrenergic receptor, a GPCR membrane protein, has been crystallised in the active state with two cholesterol molecules bound between the I, II, III and IV helices of the protein. This appears to represent a distinct cholesterol binding pocket on the membrane protein that is speculated to be conserved across up to 44% of the rhodopsin class of GPCRs. CHOBIMALT is a cholesterol-based detergent that has been shown to exhibit promising GPCR-stabilising properties. When benchmarked against other cholesterol based detergents it was found to be superior to all others tested except for cholesteryl hemisuccinate.1 CHOBIMALT has an aggregation number of roughly 200 and forms 210 ± 30 kDa micelles, which are significantly larger than those of most detergents used for biological systems which is likely due to the packing constraints associated with CHOBMALT’s large polar headgroup.2 As a result, CHOBIMALT is used mostly as an additive to other commercially available detergents in order to decrease micelle size. A branched dimaltoside motif is common in recently synthesised detergents by Chae and co-workers. These detergents have shown promising detergent properties, for example the maltose neopentyl glycol (MNG) detergent synthesised by Chae. This branched dimaltoside detergent was shown to be able to solubilise and stabilise the very labile light harvesting complex I (LHI) from Rhodopsin capsulatus in its active form for 20 days with little loss of protein conformation.3 A cholesterol-based detergent was envisaged that combines the cholesterol framework of CHOBIMALT but replaces its linear tetrasaccharide with a branched dimaltoside. This detergent would then be investigated to assess its ability to solubilise, stabilise and crystallise GPCR proteins. This cholesterol-based detergent (shown below) was eventually synthesised in 9 linear steps from cholesterol.

Identificação dos produtos de oxidação de glicosfingolípidos por espectrometria de massa

O stress oxidativo está associado ao envelhecimento e a inúmeras patologias, nomeadamente a doenças neurodegenerativas e cardiovasculares, e a diversos outros fatores. O stress oxidativo leva à oxidação de importantes biomoléculas como os lípidos e, ao contrário da maior parte dos produtos de oxidação de fosfolípidos e ácidos gordos insaturados (PUFAS), os produtos de oxidação de glicosfingolípidos (GSLs) têm sido escassamente estudados. Os glicosfingolípidos são moléculas muito diversificadas estruturalmente e com importantes funções, essencialmente no sistema nervoso central (SNC) onde estão localizados maioritariamente. Deste modo, alterações na estrutura dos GSLs conduzirão a consequente comprometimento das suas funções e ao possível desenvolvimento de patologias. Assim para identificar as modificações oxidativas que ocorrem em glicosfingolípidos e pressupor consequentes efeitos biológicos nas células sob stress oxidativo, prepararamse sistemas modelo biomiméticos com diferentes GSLs os quais foram expostos a radicais hidroxilo gerados sob condições da reação de Fenton (H2O2 e Fe2+) e as reações foram monitorizadas por diferentes metodologia utilizando a espectrometria de massa. Os resultados obtidos com este estudo permitiram-nos identificar vários produtos de oxidação produzidos durante a oxidação desta classe de lípidos. Os produtos de oxidação observados em comum, em todos os GSLs estudados (C16:0GalCer, C24:1GalCer, C24:1LacCer e GM1) foram as suas correspondentes ceramidas. Estas atuam como agentes pro-apoptóticos e podem in vivo promover a neurodegeneração nas células sob stress oxidativo. Também foi possível observar produtos com inserção de oxigénio junto às duplas ligações ou na cadeia de esfingosina (no caso do GM1) ou na cadeia de ácido gordo monoinsaturada (no caso da C24:1GalCer, C24:1LacCer), corroborando o facto de que ácidos gordos saturados não são susceptíveis à oxidação por radicais. Interessantemente em ambos os GSLs de cadeias glicosiladas compostas com mais de um açúcar (C24:1LacCer e GM1) observou-se a despolimerização oxidativa da porção glicosilada por quebra das correspondentes ligações glicosídicas. Esta degradação leva à formação de GlcCer no caso de oxidação de LacCer ou na formação de outros gangliósidos (GM2, GM3, asialoGM1 e asialoGM2) e glicolípidos (LacCer e GlcCer), no caso de oxidação de GM1. A formação por via radicalar não enzimática destes GSLs leva a distúrbios no perfil lipídico. Previamente, em certas doenças, foram observadas variações na concentração do perfil de gangliósidos e de ceramidas. Estes dados permitem sugerir que em células em condições de stress oxidativo, a acumulação de gangliósidos mais simples e ceramidas poderá ter uma contribuição de produtos da degradação oxidativa dos gangliósidos e GSLs mais complexos. Este trabalho contribui assim para uma melhor compreensão das modificações estruturais que ocorrem em alguns glicosfingolípidos em condições de stress oxidativo. Os produtos de oxidação aqui identificados suportam a sua possível futura deteção em sistemas biológicos.

Produção e extração da enzima anidrase carbônica e de ficobiliproteínas a partir de microalgas

Muito interesse tem sido focado no potencial biotecnológico das microalgas, principalmente devido à identificação de diversas substâncias sintetizadas por estes organismos, dentre elas a anidrase carbônica e as ficobiliproteínas. A anidrase carbônica é uma metaloenzima que catalisa a hidratação reversível do CO2 em bicarbonato com alta eficiência, sendo utilizada para captação de CO2 através de sistemas biológicos. A C-ficocianina e a aloficocianina, corantes naturais, são os dois principais componentes das ficobiliproteínas em cianobactérias e apresentam diversas aplicações dentro da indústria alimentícia, cosmética e farmacêutica. O objetivo principal desta tese foi avaliar a produção e a extração da anidrase carbônica e das ficobiliproteínas a partir de diferentes microalgas. Para isso, primeiramente foi realizado uma investigação da produção da anidrase carbônica pela microalga Dunaliella tertiolecta, onde foi estudada a extração da enzima e sua aplicação em sistemas de captura enzimática de CO2. Posteriormente foi avaliada a produção da enzima ao longo do cultivo de diferentes microalgas marinhas e dulcícolas (Dunaliella tertiolecta, Tetraselmis sueccica, Phaeodactylum tricornutum, Nannochloropsis oculata, Isochysis galbana, Chlorella vulgaris e Scenedesmus obliquus). A produção da enzima e de ficobiliproteínas, também, foi estudada para as cianobactérias Spirulina platensis LEB 52, Spirulina sp. LEB 18 e Synechococcus nidulans. Todos os cultivos foram acompanhados em termos de biomassa e pH. Por último, foi realizado um estudo de extração da enzima de P. tricornutum e extração conjunta da anidrase carbônica e de ficobiliproteínas da cianobactéria S. sp. LEB 18. Os cultivos foram realizados em frascos erlenmeyer contendo os meios Conway (marinhas), BG-11 (dulcícolas) e Zarrouk 20% (cianobactérias). Na avaliação da ruptura celular foram testadas as técnicas de maceração em gral e pistilo, agitação em vórtex com pérolas de vidro, sonicação com pérolas de vidro, homogeneizador ultrassônico, secagem, congelamento e descongelamento e a combinação de tratamentos. Maiores rendimentos de extração da enzima a partir da microalga D. tertiolecta foram obtidos utilizando tratamento ultrassônico, juntamente com baixas concentrações de biomassa úmida (0,1 e 0,2 g/L), e a mesma apresentou potencial para aplicação em processos de captação enzimática do CO2. Durante os cultivos, a microalga C. vulgaris se destacou como maior produtora da enzima anidrase carbônica, atingindo valores de atividade enzimática de 44,0 U/L. As cianobactérias apresentaram valores de atividade entre 41,6 e 45,9 U/L, sendo que a S. sp. LEB 18 foi a que apresentou maiores produções de C-ficocianina e aloficocianina no ponto de máxima atividade volumétrica, 65,9 e 82,2 µg/mL, respectivamente. A enzima extraída da biomassa de S. platensis LEB 52 catalisou a hidratação do CO2 que precipitou na forma de CaCO3. Maiores rendimentos de extração da enzima a partir das microalgas P. tricornutum e S. sp. LEB 18 foram obtidos utilizando homogeneizador ultrassônico, que foram 31,3 U/g e 25,5 U/g, respectivamente. A biomassa de S. sp. LEB 18, também apresentou potencial para a extração de ficobiliproteínas, obtendo- se altas concentrações de C-ficocianina (100,5 mg/g) e aloficocianina (69,9 mg/g). Através dos resultados obtidos, pode-se verificar a potencialidade das microalgas e das cianobactérias para produção da enzima anidrase carbônica e das ficobiliproteínas, biomoléculas de alto valor industrial. Este trabalho apresenta processos eficientes para a extração da enzima e de ficobiliproteínas tanto para escala laboratorial como industrial.

Information and the evolution of codon bias

The informational properties of biological systems are the subject of much debate and research. I present a general argument in favor of the existence and central importance of information in organisms, followed by a case study of the genetic code (specifically, codon bias) and the translation system from the perspective of information. The codon biases of 831 Bacteria and Archeae are analyzed and modeled as points in a 64-dimensional statistical space. The major results are that (1) codon bias evolution does not follow canonical patterns, and (2) the use of coding space in organsims is a subset of the total possible coding space. These findings imply that codon bias is a unique adaptive mechanism that owes its existence to organisms' use of information in representing genes, and that there is a particularly biological character to the resulting biased coding and information use.

Solid-liquid interactions in microscale structures and devices

Liquid-solid interactions become important as dimensions approach mciro/nano-scale. This dissertation focuses on liquid-solid interactions in two distinct applications: capillary driven self-assembly of thin foils into 3D structures, and droplet wetting of hydrophobic micropatterned surfaces. The phenomenon of self-assembly of complex structures is common in biological systems. Examples include self-assembly of proteins into macromolecular structures and self-assembly of lipid bilayer membranes. The principles governing this phenomenon have been applied to induce self-assembly of millimeter scale Si thin films into spherical and other 3D structures, which are then integrated into light-trapping photovoltaic (PV) devices. Motivated by this application, we present a generalized analytical study of the self-folding of thin plates into deterministic 3D shapes, through fluid-solid interactions, to be used as PV devices. This study consists of developing a model using beam theory, which incorporates the two competing components — a capillary force that promotes folding and the bending rigidity of the foil that resists folding into a 3D structure. Through an equivalence argument of thin foils of different geometry, an effective folding parameter, which uniquely characterizes the driving force for folding, has been identified. A criterion for spontaneous folding of an arbitrarily shaped 2D foil, based on the effective folding parameter, is thus established. Measurements from experiments using different materials and predictions from the model match well, validating the assumptions used in the analysis. As an alternative to the mechanics model approach, the minimization of the total free energy is employed to investigate the interactions between a fluid droplet and a flexible thin film. A 2D energy functional is proposed, comprising the surface energy of the fluid, bending energy of the thin film and gravitational energy of the fluid. Through simulations with Surface Evolver, the shapes of the droplet and the thin film at equilibrium are obtained. A critical thin film length necessary for complete enclosure of the fluid droplet, and hence successful self-assembly into a PV device, is determined and compared with the experimental results and mechanics model predictions. The results from the modeling and energy approaches and the experiments are all consistent. Superhydrophobic surfaces, which have unique properties including self-cleaning and water repelling are desired in many applications. One excellent example in nature is the lotus leaf. To fabricate these surfaces, well designed micro/nano- surface structures are often employed. In this research, we fabricate superhydrophobic micropatterned Polydimethylsiloxane (PDMS) surfaces composed of micropillars of various sizes and arrangements by means of soft lithography. Both anisotropic surfaces, consisting of parallel grooves and cylindrical pillars in rectangular lattices, and isotropic surfaces, consisting of cylindrical pillars in square and hexagonal lattices, are considered. A novel technique is proposed to image the contact line (CL) of the droplet on the hydrophobic surface. This technique provides a new approach to distinguish between partial and complete wetting. The contact area between droplet and microtextured surface is then measured for a droplet in the Cassie state, which is a state of partial wetting. The results show that although the droplet is in the Cassie state, the contact area does not necessarily follow Cassie model predictions. Moreover, the CL is not circular, and is affected by the micropatterns, in both isotropic and anisotropic cases. Thus, it is suggested that along with the contact angle — the typical parameter reported in literature quantifying wetting, the size and shape of the contact area should also be presented. This technique is employed to investigate the evolution of the CL on a hydrophobic micropatterned surface in the cases of: a single droplet impacting the micropatterned surface, two droplets coalescing on micropillars, and a receding droplet resting on the micropatterned surface. Another parameter which quantifies hydrophobicity is the contact angle hysteresis (CAH), which indicates the resistance of the surface to the sliding of a droplet with a given volume. The conventional methods of using advancing and receding angles or tilting stage to measure the resistance of the micropatterned surface are indirect, without mentioning the inaccuracy due to the discrete and stepwise motion of the CL on micropillars. A micronewton force sensor is utilized to directly measure the resisting force by dragging a droplet on a microtextured surface. Together with the proposed imaging technique, the evolution of the CL during sliding is also explored. It is found that, at the onset of sliding, the CL behaves as a linear elastic solid with a constant stiffness. Afterwards, the force first increases and then decreases and reaches a steady state, accompanied with periodic oscillations due to regular pinning and depinning of the CL. Both the maximum and steady state forces are primarily dependent on area fractions of the micropatterned surfaces in our experiment. The resisting force is found to be proportional to the number of pillars which pin the CL at the trailing edge, validating the assumption that the resistance mainly arises from the CL pinning at the trailing edge. In each pinning-and-depinning cycle during the steady state, the CL also shows linear elastic behavior but with a lower stiffness. The force variation and energy dissipation involved can also be determined. This novel method of measuring the resistance of the micropatterned surface elucidates the dependence on CL pinning and provides more insight into the mechanisms of CAH.

Nanotubos de carbono de parede simples funcionalizados com polietilenoglicol: avaliação de parâmetros in vivo e in vitro

Os nanomateriais apresentam uma escala na qual ao menos uma das dimensões varia entre 1 e 100 nm e possuem propriedades químicas, físicas ou biológicas dependentes da nanoestrutura e que lhes confere características funcionais de interesse para fins comerciais ou aplicações na área médica. Dentre os nanomateriais mais estudados e utilizados, destacam-se os de carbono, que incluem os fulerenos e os nanotubos de carbono (NT). Uma potencial utilização dos nanomateriais de carbono é na área biomédica, já que estes podem interagir com os sistemas biológicos em nível molecular e supramolecular com alto grau de especificidade. Em contrapartida, é importante considerar que os nanotubos de carbono podem exercer efeitos tóxicos, tendo como possível mecanismo o estresse oxidativo. Sendo assim, o objetivo desse trabalho foi investigar a ação dos nanotubos de carbono de parede única funcionalizados com polietilenoglicol (SWNT-PEG) em Danio rerio “zebrafish” (Teleostei, Cyprinidae). Avaliaram-se parâmetros bioquímicos, histológicos, comportamentais e de biodistribuição para entender como esse material se comporta in vitro e in vivo. Foi observado que o tipo de funcionalização é determinante para a ação desse material em meio biológico. No experimento in vitro o SWNT-PEG não mostrou efeito pró-oxidante nas avaliações de peroxidação lipídica, capacidade antioxidante total, conteúdo de GSH e atividade de GCL. Na exposição intraperitoneal em zebrafish constatou-se a agregação e geração de processo inflamatório, o que sugere que a cadeia de PEG utilizada para a funcionalização dos NT possui um tamanho inadequado e/ou uma funcionalização ineficiente para manter a estabilidade do material em meio biológico e evitar uma resposta inflamatória por parte do organismo exposto. Possivelmente devido a esta característica do nanomaterial, nas análises de biodistribuição, através de espectroscopia Raman, não se observou distribuição de SWNT-PEG no sistema nervoso central de zebrafish. No entanto, através da análise histológica foi observado processo inflamatório no tecido nervoso central, bem como alterações comportamentais avaliadas na tarefa de campo aberto.

Inauguration Speech of the school year 1993 of the School of Library, Documentation and Information

Since the child starts in the teaching - learning is made aware that there is a division of natural resources: renewable and nonrenewable. It also says that every natural resource is useless unless it explodes. But to apply such resources necessary knowledge. We realize today that the same biological systems of living things (renewable resources) are transmitters of information. He uses that information to nurture their knowledge, and this is essential for the use and conservation of resources, making valid then the principle that "there is no knowledge without information."

An immune inspired Network Intrusion Detection System utilising correlation

Network Intrusion Detection Systems (NIDS) are computer systems which monitor a network with the aim of discerning malicious from benign activity on that network. While a wide range of approaches have met varying levels of success, most IDSs rely on having access to a database of known attack signatures which are written by security experts. Nowadays, in order to solve problems with false positive alerts, correlation algorithms are used to add additional structure to sequences of IDS alerts. However, such techniques are of no help in discovering novel attacks or variations of known attacks, something the human immune system (HIS) is capable of doing in its own specialised domain. This paper presents a novel immune algorithm for application to the IDS problem. The goal is to discover packets containing novel variations of attacks covered by an existing signature base.

Encapsulation of Local Anesthetic Bupivacaine in Biodegradable Poly(DL-lactide-co-glycolide) Nanospheres: Factorial Design, Characterization and Cytotoxicity Studies

Local anesthetic agents cause temporary blockade of nerve impulses productiong insensitivity to painful stimuli in the area supplied by that nerve. Bupivacaine (BVC) is an amide-type local anesthetic widely used in surgery and obstetrics for sustained peripheral and central nerve blockade. in this study, we prepared and characterized nanosphere formulations containing BVC. To achieve these goals, BVC loaded poly(DL-lactide-co-glycolide) (PLGA) nanospheres (NS) were prepared by nanopreciptation and characterized with regard to size distribution, drug loading and cytotoxicity assays. The 2(3-1) factorial experimental design was used to study the influence of three different independent variables on nanoparticle drug loading. BVC was assayed by HPLC, the particle size and zeta potential were determined by dynamic light scattering. BVC was determined using a combined ultrafiltration-centrifugation technique. The results of optimized formulations showed a narrow size distribution with a polydispersivity of 0.05%, an average diameter of 236.7 +/- 2.6 nm and the zeta potential -2.93 +/- 1,10 mV. In toxicity studies with fibroblast 3T3 cells, BVC loaded-PLGA-NS increased cell viability, in comparison with the effect produced by free BVC. In this way, BVC-loaded PLGA-NS decreased BVC toxicity. The development of BVC formulations in carriers such as nanospheres could offer the possibility of controlling drug delivery in biological systems, prolonging the anesthetic effect and reducing toxicity.

Computational analysis and physico-chemical characterization of an inclusion compound between praziquantel and methyl-beta-cyclodextrin for use as an alternative in the treatment of schistosomiasis

Schistosomiasis is still an endemic disease in many regions, with 250 million people infected with Schistosoma and about 500,000 deaths per year. Praziquantel (PZQ) is the drug of choice for schistosomiasis treatment, however it is classified as Class II in the Biopharmaceutics Classification System, as its low solubility hinders its performance in biological systems. The use of cyclodextrins is a useful tool to increase the solubility and bioavailability of drugs. The aim of this work was to prepare an inclusion compound of PZQ and methyl-beta-cyclodextrin (MeCD), perform its physico-chemical characterization, and explore its in vitro cytotoxicity. SEM showed a change of the morphological characteristics of PZQ:MeCD crystals, and IR data supported this finding, with changes after interaction with MeCD including effects on the C-H of the aromatic ring, observed at 758 cm(-1). Differential scanning calorimetry measurements revealed that complexation occurred in a 1:1 molar ratio, as evidenced by the lack of a PZQ transition temperature after inclusion into the MeCD cavity. In solution, the PZQ UV spectrum profile in the presence of MeCD was comparable to the PZQ spectrum in a hydrophobic solvent. Phase solubility diagrams showed that there was a 5.5-fold increase in PZQ solubility, and were indicative of a type A(L) isotherm, that was used to determine an association constant (K(a)) of 140.8 M(-1). No cytotoxicity of the PZQ:MeCD inclusion compound was observed in tests using 3T3 cells. The results suggest that the association of PZQ with MeCD could be a good alternative for the treatment of schistosomiasis.

Synthetic regulation of eukaryotic gene expression by noncoding RNA

Synthetic biological systems promise to combine the spectacular diversity of biological functionality with engineering principles to design new life to address many pressing needs. As these engineered systems advance in sophistication, there is ever-greater need for customizable, situation-specific expression of desired genes. However, existing gene control platforms are generally not modular, or do not display performance requirements required for robust phenotypic responses to input signals. This work expands the capabilities of eukaryotic gene control in two important directions.

For development of greater modularity, we extend the use of synthetic self-cleaving ribozyme switches to detect changes in input protein levels and convey that information into programmed gene expression in eukaryotic cells. We demonstrate both up- and down-regulation of levels of an output transgene by more than 4-fold in response to rising input protein levels, with maximal output gene expression approaching the highest levels observed in yeast. In vitro experiments demonstrate protein-dependent ribozyme activity modulation. We further demonstrate the platform in mammalian cells. Our switch devices do not depend on special input protein activity, and can be tailored to respond to any input protein to which a suitable RNA aptamer can be developed. This platform can potentially be employed to regulate the expression of any transgene or any endogenous gene by 3’ UTR replacement, allowing for more complex cell state-specific reprogramming.

We also address an important concern with ribozyme switches, and riboswitch performance in general, their dynamic range. While riboswitches have generally allowed for versatile and modular regulation, so far their dynamic ranges of output gene modulation have been modest, generally at most 10-fold. We address this shortcoming by developing a modular genetic amplifier for near-digital control of eukaryotic gene expression. We combine ribozyme switch-mediated regulation of a synthetic TF with TF-mediated regulation of an output gene. The amplifier platform allows for as much as 20-fold regulation of output gene expression in response to input signal, with maximal expression approaching the highest levels observed in yeast, yet being tunable to intermediate and lower expression levels. EC50 values are more than 4 times lower than in previously best-performing non-amplifier ribozyme switches. The system design retains the modular-input architecture of the ribozyme switch platform, and the near-digital dynamic ranges of TF-based gene control.

Together, these developments suggest great potential for the wide applicability of these platforms for better-performing eukaryotic gene regulation, and more sophisticated, customizable reprogramming of cellular activity.

An Evaluation of Oxidative Status in Serum and Breast Milk of Mothers Giving Birth Prematurely and at Full-Term

Background: Burning fat and carbohydrates to provide energy in biological systems causes the formation of free oxygen species. Objectives: This study aimed to evaluate the oxidative status of serum and breast milk of mothers giving birth prematurely and at full-term. Materials and Methods: The study comprised 50 mothers who gave birth at full-term at more than 38 weeks and 43 mothers who gave birth pre-term at below 32 weeks. On the postnatal 5th day, samples of the mother’s milk and serum were taken and stored at -80°C until the study day. On the study day, the total oxidant and total antioxidant levels were measured using the Erel method and the oxidative stress index (OSI) was calculated. Results: While the total oxidant level and total antioxidant level values of the milk of the premature birth mothers were found to be significantly high compared to those of the full-term birth mothers (P = 0.001), no statistically significant difference was found in the oxidative stress index values (P > 0.05). No statistically significant difference was found in the total oxidant level and oxidative stress index values of the serum of the premature birth mothers compared to those of the full-term birth mothers, while the total antioxidant level was found to be significantly low (P = 0.04). Conclusions: The oxidants and antioxidants in the milk of mothers giving birth prematurely were found to be significantly higher than those of full-term birth mothers. This can be evaluated as the milk of the premature birth mothers providing increased antioxidant defense to protect the infant.

New bodipy dyads for two-photons fluorescence imaging in cells

Fluorescent probes are essential tools for studying biological systems. The last decade has witnessed particular interest in the development of two-photon excitable probes, due to their advantageous features in tissue imaging compared to the corresponding one-photon probes [1]. Recently, we have designed and synthetized an aminonaphthalimide–BODIPY derivative as energy transfer cassettes and were found to show very fast and efficient BODIPY fluorescence sensitization [2]. This was observed upon one- and two-photon excitation, which extends the application range of the investigated bichromophoric dyads in terms of accessible excitation wavelengths. In order to increase the two-photon absorption of the system aminonaphthalimide fluorophore was replace with a Prodan analog (BODIPY dyad 1), which presents found a variety of applications as probes and labels in biology [3]. The two-photon absorption cross-section  of the dyads is significantly incremented by the presence of the 6-acetyl-2-naphthylamine donor group. The emission maximum of a BODIPY fluorophore can significantly be red-shifted in comparison to their precursors by conjugation with aromatic aldehydes. [4] We use a synthetic strategy to obtain BODIPY dyad 2 that incorporates an imidazole ring. This molecule can be used in biological media as a near-neutral pH indicator based on one- and two-photon excitable BODIPY acceptor.

Real-time Biosensor for the Assessment of Nanotoxicity and Cancer Electrotherapy

Knowledge of cell electronics has led to their integration to medicine either by physically interfacing electronic devices with biological systems or by using electronics for both detection and characterization of biological materials. In this dissertation, an electrical impedance sensor (EIS) was used to measure the electrode surface impedance changes from cell samples of human and environmental toxicity of nanoscale materials in 2D and 3D cell culture models. The impedimetric response of human lung fibroblasts and rainbow trout gill epithelial cells when exposed to various nanomaterials was tested to determine their kinetic effects towards the cells and to demonstrate the biosensor’s ability to monitor nanotoxicity in real-time. Further, the EIS allowed rapid, real-time and multi-sample analysis creating a versatile, noninvasive tool that is able to provide quantitative information with respect to alteration in cellular function. We then extended the application of the unique capabilities of the EIS to do real-time analysis of cancer cell response to externally applied alternating electric fields at different intermediate frequencies and low-intensity. Decreases in the growth profiles of the ovarian and breast cancer cells were observed with the application of 200 and 100 kHz, respectively, indicating specific inhibitory effects on dividing cells in culture in contrast to the non-cancerous HUVECs and mammary epithelial cells. We then sought to enhance the effects of the electric field by altering the cancer cell’s electronegative membrane properties with HER2 antibody functionalized nanoparticles. An Annexin V/EthD-III assay and zeta potential were performed to determine the cell death mechanism indicating apoptosis and a decrease in zeta potential with the incorporation of the nanoparticles. With more negatively charged HER2-AuNPs attached to the cancer cell membrane, the decrease in membrane potential would thus leave the cells more vulnerable to the detrimental effects of the applied electric field due to the decrease in surface charge. Therefore, by altering the cell membrane potential, one could possibly control the fate of the cell. This whole cell-based biosensor will enhance our understanding of the responsiveness of cancer cells to electric field therapy and demonstrate potential therapeutic opportunities for electric field therapy in the treatment of cancer.

ENVIRONMENTAL INFLUENCES AND EPIGENETIC MECHANISMS IN RISK FOR DEPRESSION

Thesis (Ph.D, Psychology) -- Queen's University, 2016-10-04 17:37:07.888