Phenolic matrices and sisal fibers modified with hydroxy terminated polybutadiene rubber: Impact strength, water absorption, and morphological aspects of thermosets and composites

The aim of the present work was to investigate the toughening of phenolic thermoset and its composites reinforced with sisal fibers, using hydroxyl-terminated polybutadiene rubber (HTPB) as both impact modifier and coupling agent. Substantial increase in the impact strength of the thermoset was achieved by the addition 10% of HTPB. Scanning electron microscopy (SEM) images of the material with 15% HTPB content revealed the formation of some rubber aggregates that reduced the efficiency of the toughening mechanism. In composites, the toughening effect was observed only when 2.5% of HTPB was added. The rubber aggregates were found located mainly at the matrix-fiber interface suggesting that HTPB could be used as coupling agent between the sisal fibers and the phenolic matrix. A composite reinforced with sisal fibers pre-impregnated with HTPB was then prepared; its SEM images showed the formation of a thin coating of HTPB on the surface of the fibers. The ability of HTBP as coupling agent between sisal fibers and phenolic matrix was then investigated by preparing a composite reinforced with sisal fibers pre-treated with HTPB. As revealed by its SEM images, the HTPB pre-treatment of the fibers resulted on the formation of a thin coating of HTPB on the surface of the fibers, which provided better compatibility between the fibers and the matrix at their interface, resulting in a material with low water absorption capacity and no loss of impact strength. (C) 2009 Elsevier B.V. All rights reserved.

The impact of water concentration on the catalytic oxidation of ethanol on platinum electrode in concentrated phosphoric acid

The electro-oxidation of ethanol on platinum in phosphoric acid opens the door to promote the oxidation reaction at higher temperatures. However, the effect of the presence of water is not well understood. In this work, the electro-oxidation of ethanol on platinum was studied in concentrated phosphoric acid containing different concentrations of water at room temperature. The results show that effect of bulk water on the rate electro-oxidation is highest at 0.60 V and decreases for increasing potentials. This was suggested as due to the increasing formation of oxygenated species on the electrode surface with potential, which in turn is more efficient than the increase of water content in the electrolyte. Altogether, these results were interpreted as an evidence of a Langmuir-Hinshelwood step involving oxygenated species as one of the adsorbed partners. (C) 2009 Elsevier B.V. All rights reserved.

Nuclear magnetic resonance water relaxation time changes in bananas during ripening: a new mechanism

BACKGROUND: Nuclear magnetic resonance studies of banana fragments during ripening show an increase on the water transverse relaxation time (T(2)) and a decrease in water self-diffusion coefficient (D). As T(2) and D are normally directly correlated, we studied these two properties in intact bananas during ripening, in an attempt to rule out the effect of injury on the apparent discrepancies in the behavior of T(2) and D. RESULTS: The results show that injury in bananas causes a decrease in T(2) of the water in vacuoles (T(2vac)). They also show that T(2vac) increased and D decreased during ripening, ruling out the injury effect. To explain the apparent discrepancies, we propose a new hypothesis for the increase in T(2) values, based on the reduction of Fe(3+) ions to Fe(2+) by galacturonic acid, produced by the hydrolysis of pectin and a decrease in internal oxygen concentration during ripening. CONCLUSION: As injury alters T(2) values it is necessary to use intact bananas to study relaxation times during ripening. The novel interpretation for the increase in T(2vac) based on reduction of Fe(+3) and O(2) concentration is an alternative mechanism to that based on the hydrolysis of starch in amyloplasts. (C) 2010 Society of Chemical Industry

The stability of AM and FM screenings in different water conditions – with the mottle under consideration

This project was performed at Rochester Institute of Technology to get more understanding and knowledge about AM and FM screenings similarities and differences with considerations of the mottle. By designing a test form conformed to the specific measurements and printing it on Heidelberg's Sunday 2000 press, the project group has evaluated the questions that already existed and the ones that occurred during the project. Hence the first press run left some unexpected phenomenon therefore another press run was performed. Measurements were performed and graphs produced in Excel. The project group evaluated the results and from that able to establish facts and draw conclusions. It has been a great experience for the project group and they have learnt a lot.

Viabilidade tecnica da producao de blocos silico-calcarios na regiao de Santa Maria, no Rio Grande do Sul

Este trabalho é camposto por dois estudos basicamente: um estudo teórico sobre os blocos sílico-calcários de areia-cal e um estudo prático sobre a viabilidade técnica de produção destes blocos em uma região determinada. A pesquisa teórica procurou elucidar o que vem a ser um bloco síilico-calcário, buscando a viabilidade da pesquisa prática e os pontos principais a serem abordados. Foram estudados, nesta parte, as matérias-primas e o processo produtivo empregado na confecção destes elementos, mostrando a importância de cada item para as características do produto final. Foi dada atenção ainda às características técnicas, aos fatores que determinam a produção e emprego e aos aspectos positivos e negativos dos elementos deste tipo produzido em outros locais. A pesquisa prática buscou a disponibilidade de matéria-prima conveniente para a produção de blocos sílicos-calcários, e o efeito das variações do processo produtivo sobre os produtos confeccionados com os materiais estudados. A matéria-prima empregada foi uma areia quartzosa da região de Santa Maria-RS, cal calcítica virgem de São Sepé-RS, e cinza volante da termoelétrica Presidente Médici, em Bagé-RS, fazendo-se variações nas percentagens destes componentes. As variações do processo produtivo foram efetuadas no tipo de moldagem dos corpos de prova, em que foi usada pressão, vibração e vibro-compressão, e na pressão de autoclavagem. Para todas as variações efetuadas foram obtidas as seguintes características: variações por autoclavagem, massa específica aparente, absorção d´água, resistência à compressão, resistência à tração e módulo de elasticidade à compressão, as quais foram relacionadas através de quadros e figuras às diversas variações.

Estudo de reatores eletroquímicos para remoção de Cu2+ , Zn2+, Fenol e BTEX em água produzida

The production of water has become one of the most important wastes in the petroleum industry, specifically in the up stream segment. The treatment of this kind of effluents is complex and normally requires high costs. In this context, the electrochemical treatment emerges as an alternative methodology for treating the wastewaters. It employs electrochemical reactions to increase the capability and efficiency of the traditional chemical treatments for associated produced water. The use of electrochemical reactors can be effective with small changes in traditional treatments, generally not representing a significant additional surface area for new equipments (due to the high cost of square meter on offshore platforms) and also it can use almost the same equipments, in continuous or batch flow, without others high costs investments. Electrochemical treatment causes low environmental impact, because the process uses electrons as reagent and generates small amount of wastes. In this work, it was studied two types of electrochemical reactors: eletroflocculation and eletroflotation, with the aim of removing of Cu2+, Zn2+, phenol and BTEX mixture of produced water. In eletroflocculation, an electrical potential was applied to an aqueous solution containing NaCl. For this, it was used iron electrodes, which promote the dissolution of metal ions, generating Fe2+ and gases which, in appropriate pH, promote also clotting-flocculation reactions, removing Cu2+ and Zn2+. In eletroflotation, a carbon steel cathode and a DSA type anode (Ti/TiO2-RuO2-SnO2) were used in a NaCl solution. It was applied an electrical current, producing strong oxidant agents as Cl2 and HOCl, increasing the degradation rate of BTEX and phenol. Under different flow rates, the Zn2+ was removed by electrodeposition or by ZnOH formation, due the increasing of pH during the reaction. To better understand the electrochemical process, a statistical protocol factor (22) with central point was conducted to analyze the sensitivity of operating parameters on removing Zn2+ by eletroflotation, confirming that the current density affected the process negatively and the flow rate positively. For economical viability of these two electrochemical treatments, the energy consumption was calculated, taking in account the kWh given by ANEEL. The treatment cost obtained were quite attractive in comparison with the current treatments used in Rio Grande do Norte state. In addition, it could still be reduced for the case of using other alternative energy source such as solar, wind or gas generated directly from the Petrochemical Plant or offshore platforms

Modelagem analítica e experimental da filtração em meios porosos

Deep bed filtration occurs in several industrial and environmental processes like water filtration and soil contamination. In petroleum industry, deep bed filtration occurs near to injection wells during water injection, causing injectivity reduction. It also takes place during well drilling, sand production control, produced water disposal in aquifers, etc. The particle capture in porous media can be caused by different physical mechanisms (size exclusion, electrical forces, bridging, gravity, etc). A statistical model for filtration in porous media is proposed and analytical solutions for suspended and retained particles are derived. The model, which incorporates particle retention probability, is compared with the classical deep bed filtration model allowing a physical interpretation of the filtration coefficients. Comparison of the obtained analytical solutions for the proposed model with the classical model solutions allows concluding that the larger the particle capture probability, the larger the discrepancy between the proposed and the classical models

Estudos hidroquímicos da água produzida de um determinado campo de petróleo da bacia potiguar

Waste generated during the exploration and production of oil, water stands out due to various factors including the volume generated, the salt content, the presence of oil and chemicals and the water associated with oil is called produced water. The chemical composition of water is complex and depends strongly on the field generator, because it was in contact with the geological formation for thousands of years. This work aims to characterize the hydrochemical water produced in different areas of a field located in the Potiguar Basin. We collected 27 samples from 06 zones (400, 600, 400/600, 400/450/500, 350/400, A) the producing field called S and measured 50 required parameter divided between physical and chemical parameters, cations and anions. In hydrochemical characterization was used as tools of reasons ionic calculations, diagrams and they hydrochemical classification diagram Piper and Stiff diagram and also the statistic that helped in the identification of signature patterns for each production area including the area that supplies water injected this field for secondary oil recovery. The ionic balance error was calculated to assess the quality of the results of the analysis that was considered good, because 89% of the samples were below 5% error. Hydrochemical diagrams classified the waters as sodium chloride, with the exception of samples from Area A, from the injection well, which were classified as sodium bicarbonate. Through descriptive analysis and discriminant analysis was possible to obtain a function that differs chemically production areas, this function had a good hit rate of classification was 85%

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Aplicação de técnicas eletroquímicas na determinação do potencial de corrosividade de ligas de alumínio em água produzida

The resistance of aluminum and their alloys, to the corrosion phenomenon, in aqueous solutions, is a result of the oxide layer formed. However, the corrosion process in the aluminum alloy is associated with the presence a second phase of particles or the presence of chloride ions which promote the disruption of the oxide layer located producing the corrosion process. On the other hand, the term water produced is used to describe the water after the separation of the oil and gas in API separators. The volumes of produced water arrive around 5 more times to the volume of oil produced. The greatest feature of the water is the presence of numerous pollutants. Due to the increased volume of waste around the world in the current decade, the outcome and the effect of the discharge of produced water on the environment has recently become an important issue of environmental concern where numerous treatments are aimed at reducing these contaminants before disposal. Then, this study aims to investigate the electrochemical corrosion behavior of aluminum alloy 6060 in presence of water produced and the influence of organic components as well as chloride ions, by using the electrochemical techniques of linear polarization. The modification of the passive layer and the likely breakpoints were observed by atomic force microscopy (AFM). In the pit formation potential around -0.4 to -0.8 V/EAg/AgCl was observed that the diffusion of chloride ions occurs via the layer formed with the probable formation of pits. Whereas, at temperatures above 65 °C, it was observed that the range of potential for thepit formation was -0.4 to -0.5 V/EAg/AgCl. In all reactions, the concentration of Al(OH)3 in the form of a gel was observed

CERAMIC MATERIAL FROM SEWAGE SLUDGE AS SUPPORT MATERIAL SUPPLY WATER FILTRATION

This study shows a possibility of using municipal sewage sludge after thermal treatment in the production of a filtering material to water treatment. Due to the fast urbanization and implementation of high standards for effluent in many countries in recent years, the sewage sludge is being produced in an ever increasing amount. Therefore, the use of sludge is a suitable solution for the expected large quantity of sludge. Dehydration of sludge was performed by controlled heating at temperatures of 1100 degrees C, 850 degrees C, 650 degrees C, 350 degrees C for 3 hours. After thermal treatment the sludge was characterized by X-ray fluorescence, TG/DTG/DTA, residue solubilization and residue lixiviation tests. The aim of the present work was to observe, thought the characterization techniques, if the treated sewage sludge is or not adequate to be used as filter material to water treatment. It will be verified which treatment temperature of the sludge offer possibility to its use in water treatment without carrying pollutants in concentrations out of the standards.

Water quality and zooplankton in tanks with larvae of Brycon Orbignyanus (Valenciennes, 1949)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e avaliação de nanoemulsão catiônica como possível vetor não-viral para pIRES2-EGFP

Gene therapy is based on the transfer of exogenous genetic material into cells or tissues in order to correct, supplement or silencing a particular gene. To achieve this goal, efficient vehicles, viral or non-viral, should be developed. The aim of this work was to produce and evaluate a nanoemulsion system as a possible carrier for no-viral gene therapy able to load a plasmid model (pIRES2-EGFP). The nanoemulsion was produced by the sonication method, after been choose in a pseudo-ternary phase diagram build with 5 % of Captex 355®, 1.2 % of Tween 80®, 0.8 % of Span 80®, 0.16% of stearylamine and water (to 100 %). Measurements of droplet size, polydispersity index (PI), zeta potential, pH and conductivity, were performed to characterize the system. Results showed droplets smaller than 200 nm (PI < 0.2) and zeta potential > 30 mV. The formulation pH was near to 7.0 and conductivity was that expected to oil in water systems (70 to 90 μS/s) A scale up study, the stability of the system and the best sterilization method were also evaluated. We found that the system may be scaled up considering the time of sonication according to the volume produced, filtration was the best sterilization process and nanoemulsions were stable by 180 days at 4 ºC. Once developed, the complexation efficiency of the plasmid (pDNA) by the system was tested by agarose gel electrophoresis retardation assay.. The complexation efficiency increases when stearylamine was incorporated into aqueous phase (from 46 to 115 ng/μL); regarding a contact period (nanoemulsion / pDNA) of at least 2 hours in an ice bath, for complete lipoplex formation. The nanoemulsion showed low toxicity in MRC-5 cells at the usual transfection concentration, 81.49 % of survival was found. So, it can be concluded that a nanoemulsion in which a plasmid model was loaded was achieved. However, further studies concerning transfectation efficiency should be performed to confirm the system as non-viral gene carrier

Natal como destino turístico : um estudo das imagens (re)veladas pela mídia, pelos turistas e suas implicações educacionais e culturais

This thesis is a result of a research on Natal/RN as a tourist destination. We understand that cities are chosen as tourist destinations beyond its cartographic localization, from other dimensions of meanings that, in its set, constitute images. These images are, probably, very different of the images constructed by native and resident populations, who possess relations of identity with the place. The knowledge of the meanings that others attribute to this city as tourist destination, bring us near to the symbolic bonds established by individuals or social groups on the act of their choices, as well as bring us near to the interaction process city-tourists where the expectations are confirmed or not. The images divulgated by the media also participate of the complex formation of the tourist image that is being constructed and available for the different public, in different social contexts. The tourism constitutes a symbolic asset of the modern society, being considered by the studious, as one of the most expressive phenomena of the modernity, for involving each year displacement and the interaction of thousand of people of different cultures in the entire world. All this people s mobilization points to practical social related to personal motivations, to the entailed desired to the idea to travel and to exceed borders. It is already consensus that tourism is a phenomenon of economic growth, generating jobs, income, professional, qualification, bringing improvements for the host cities. Since 1995, in Brazil, the tourism as a sector of the economy, passed to be considered one of the national priorities, and in this perspective, the national politics of the tourism invested in infrastructure of Brazilian cities with high tourist potential, objecting to increase the flows of Brazilian and foreign tourists. Owing to this fact, the country still invests in programs of tourist marketing, mainly divulging the images of the natural beauties of Brazil abroad. And for Brazilians, the campaigns appeal to rescue the feeling to be Brazilian, associating the idea to travel and know its country. Natal city possesses an excellent positioning in the tourist marketing, being predominantly divulgated in national and international level, for its naturalistic singularity, where the images of its natural enchantments as warm water beaches, white dunes, warm weather, constant breeze and an always blue sky are shown as the favorite scene on this city. From what was viewed above that the choice of a tourist destination articulates from a determined imaginary of a place, already constructed or in process of construction, we consider the knowledge of this imaginary a basic learning for the population of the city and especially, for educators, in the formation of professionals in this area and for tourism managers, elaborators of public politics. Based on this estimative, we developed this research that had as a general objective to identify the images that illustrate Natal city as a tourist destination - our objective of study, particularly the meanings and senses attributed by the tourist marketing (hotel s folders) and by the tourists that visited the city during this study. The discussions and reflections that had guided this research had been given from the theoretical link between imaginary and social representation, also considering some interfaces between the fields of communication and symbol. From the studied authors, Baczko (1985) clarifies that the study of social imaginary is directed for the mechanisms and structures of the social life, especially for the intervention accomplishes and efficient of the representations and symbols in the practical collectives, as well as in its direction and orientation . Following this same thought, Moscovici (1978) says that the social representation are produced in communicational and symbolic contexts, and these representations once that already constituted circulate socially as almost tangible entities. Based on this fundament and on the analyze of Barthes (1990), particularly in the approach given to the reading of photographic image, we could observe on hotel s folders that each page evidences senses and meanings of functionality of internal and external spaces, pointing to the way of leisure offered by the keepers of city which is the hotels. About, the leisure that they offer, it is directed to young public, giving meaning to the young myth of personalized leisure tourism on children, young and adults images. The image about security that hotels offer and the singular image of Natal city as a paradise place, provide an idealization of pleasure through the sun, dunes, and beaches and also due to the hospitability of the natives who are assigned as educated . For the tourist that participated on this research, Natal city is tied only by the imaginary of leisure and nature which constitute the emotional link of the relation media-city-tourist. And with such force and fullness of directions the city discloses without tensions and contradictions as a place protected by a mythical and sacred aura. The study also demonstrates us that the potiguar culture remains (almost) forgotten, due to the silenced in this imaginary. In this perspective, we highlight that this culture silence is very close related to the disvalue of education in its general meaning. We defend that the imaginary apprehended constitutes a new reading and a new looking and understanding the tourist reality that comes historically consolidating in this city. In this direction, we glimpse that this study and its future dismemberments can collaborate with the process of rescue the cultural values of the potiguar people, in the way that the meaning of tourist may be redefined, and the tourist image of the city can be also disclosed for its identities particularities of its culture

Partial protection against tissue cysts formation in pigs vaccinated with crude rhoptry proteins of Toxoplasma gondii

A vaccine containing crude Toxoplasma gondii rhoptry proteins incorporated in the immunostimulating complexes (ISCOM) adjuvant was tested in pigs for protecting against tissue cyst formation. For this, 38 mixed breed pigs were divided into four groups, G1 (vaccinated challenged, n = 10) received two doses (100 mu g/dose) of the rhoptry vaccine at days 0 and 21, G2 (vaccinated challenged, n = 10) received viable tachyzoites (7 x 10(7)) of the RH strain at day 0, G3 (unvaccinated challenged, n = 10) and G4 (unvaccinated unchallenged, n = 8). Pigs were challenged with 4 x 10(4) VEG strain oocysts 57 days later. The G1 pigs produced high IgG antibody levels in the indirect enzyme-linked immunosorbent assay (ELISA) after the second dose of rhoptry vaccine, but were not clinically protected against a high dose oocyst challenge. Partial protection was observed in G1 at the chronic phase of infection, when compared with G3. Pigs in group 2 developed high antibody levels and were protected against clinic signs. T gondii was not detected in two (G1) and three (G2) pigs by mouse bioassay. The results indicate partial protection in pigs vaccinated with a rhoptry vaccine. (c) 2005 Elsevier B.V. All rights reserved.