Cultural Diffusion Was the Main Driving Mechanism of the Neolithic Transition in Southern Africa

It is well known that the Neolithic transition spread across Europe at a speed of about 1 km/yr. This result has been previously interpreted as a range expansion of the Neolithic driven mainly by demic diffusion (whereas cultural diffusion played a secondary role). However, a long-standing problem is whether this value (1 km/yr) and its interpretation (mainly demic diffusion) are characteristic only of Europe or universal (i.e. intrinsic features of Neolithic transitions all over the world). So far Neolithic spread rates outside Europe have been barely measured, and Neolithic spread rates substantially faster than 1 km/yr have not been previously reported. Here we show that the transition from hunting and gathering into herding in southern Africa spread at a rate of about 2.4 km/yr, i.e. about twice faster than the European Neolithic transition. Thus the value 1 km/yr is not a universal feature of Neolithic transitions in the world. Resorting to a recent demic-cultural wave-of-advance model, we also find that the main mechanism at work in the southern African Neolithic spread was cultural diffusion (whereas demic diffusion played a secondary role). This is in sharp contrast to the European Neolithic. Our results further suggest that Neolithic spread rates could be mainly driven by cultural diffusion in cases where the final state of this transition is herding/pastoralism (such as in southern Africa) rather than farming and stockbreeding (as in Europe)

Mycobacterium tuberculosis Infection in Young Children: Analyzing the Performance of the Diagnostic Tests

This study evaluated the performance of the Tuberculin Skin Test (TST) and Quantiferon-TB Gold in-Tube (QFT) and the possible association of factors which may modify their results in young children (0-6 years) with recent contact with an index tuberculosis case. Materials and Methods: A cross-sectional study including 135 children was conducted in Manaus, Amazonas-Brazil. The TST and QFT were performed and the tests results were analyzed in relation to the personal characteristics of the children studied and their relationship with the index case. Results: The rates of positivity were 34.8% (TST) and 26.7% (QFT), with 14.1% of indeterminations by the QFT. Concordance between tests was fair (Kappa = 0.35 P<0.001). Both the TST and QFT were associated with the intensity of exposure (Linear OR = 1.286, P = 0.005; Linear OR = 1.161, P = 0.035 respectively) with only the TST being associated with the time of exposure (Linear OR = 1.149, P = 0.009). The presence of intestinal helminths in the TST+ group was associated with negative QFT results (OR = 0.064, P = 0.049). In the TST- group lower levels of ferritin were associated with QFT+ results (Linear OR = 0.956, P = 0.036). Conclusions: Concordance between the TST and QFT was lower than expected. The factors associated with the discordant results were intestinal helminths, ferritin levels and exposure time to the index tuberculosis case. In TST+ group, helminths were associated with negative QFT results suggesting impaired cell-mediated immunity. The TST-&QFT+ group had a shorter exposure time and lower ferritin levels, suggesting that QFT is faster and ferritin may be a potential biomarker of early stages of tuberculosis infection.

Tests of International Asset Pricing Models in Scandinavian Stock Markets

This thesis examines whether global, local and exchange risks are priced in Scandinavian countries’ equity markets by using conditional international asset pricing models. The employed international asset pricing models are the world capital asset pricing model, the international asset pricing model augmented with the currency risk, and the partially segmented model augmented with the currency risk. Moreover, this research traces estimated equity risk premiums for the Scandinavian countries. The empirical part of the study is performed using generalized method of moments approach. Monthly observations from February 1994 to June 2007 are used. Investors’ conditional expectations are modeled using several instrumental variables. In order to keep system parsimonious the prices of risk are assumed to be constant whereas expected returns and conditional covariances vary over time. The empirical findings of this thesis suggest that the prices of global and local market risk are priced in the Scandinavian countries. This indicates that the Scandinavian countries are mildly segmented from the global markets. Furthermore, the results show that the exchange risk is priced in the Danish and Swedish stock markets when the partially segmented model is augmented with the currency risk factor.

Heterogeneous products and tests for an appropriate aggregation level considering different qualities: evidence from fresh hake at Barcelona’s wholesale market

[cat] Aquest estudi destaca la importància de considerar un nivell d’agregació adequat en els anàlisis de demanda, ja que treballar utilitzant un nivell d’agregació inadequat pot donar lloc a estimacions esbiaixades. Aquest fet es mostra a través de l’anàlisi de diferents productes de lluç fresc comercialitzats a Mercabarna, el mercat majorista de Barcelona. La literatura sobre la demanda de peix tracta al lluç com un únic producte i espècie. No obstant això, en el mercat espanyol, es comercialitzen molts peixos com a lluç, els quals mostren comportaments molt diferents (des de béns inferiors fins a béns de luxe). Els resultats obtinguts, en concordança amb les observacions empíriques, demostren que l’anàlisi s’ha de realitzar amb un major grau de detall que a nivell d’espècie. Això qüestiona els resultats d’anteriors estudis de demanda i la majoria de les bases de dades, on l’observació del nivell d’agregació adequat dels productes no es té en compte.

Heterogeneous products and tests for an appropriate aggregation level considering different qualities: evidence from fresh hake at Barcelona’s wholesale market

[cat] Aquest estudi destaca la importància de considerar un nivell d’agregació adequat en els anàlisis de demanda, ja que treballar utilitzant un nivell d’agregació inadequat pot donar lloc a estimacions esbiaixades. Aquest fet es mostra a través de l’anàlisi de diferents productes de lluç fresc comercialitzats a Mercabarna, el mercat majorista de Barcelona. La literatura sobre la demanda de peix tracta al lluç com un únic producte i espècie. No obstant això, en el mercat espanyol, es comercialitzen molts peixos com a lluç, els quals mostren comportaments molt diferents (des de béns inferiors fins a béns de luxe). Els resultats obtinguts, en concordança amb les observacions empíriques, demostren que l’anàlisi s’ha de realitzar amb un major grau de detall que a nivell d’espècie. Això qüestiona els resultats d’anteriors estudis de demanda i la majoria de les bases de dades, on l’observació del nivell d’agregació adequat dels productes no es té en compte.

DWI and complex brain network analysis predicts vascular cognitive impairment in spontaneous hypertensive rats undergoing executive function tests

The identification of biomarkers of vascular cognitive impairment is urgent for its early diagnosis. The aim of this study was to detect and monitor changes in brain structure and connectivity, and to correlate them with the decline in executive function. We examined the feasibility of early diagnostic magnetic resonance imaging (MRI) to predict cognitive impairment before onset in an animal model of chronic hypertension: Spontaneously Hypertensive Rats. Cognitive performance was tested in an operant conditioning paradigm that evaluated learning, memory, and behavioral flexibility skills. Behavioral tests were coupled with longitudinal diffusion weighted imaging acquired with 126 diffusion gradient directions and 0.3 mm(3) isometric resolution at 10, 14, 18, 22, 26, and 40 weeks after birth. Diffusion weighted imaging was analyzed in two different ways, by regional characterization of diffusion tensor imaging (DTI) indices, and by assessing changes in structural brain network organization based on Q-Ball tractography. Already at the first evaluated times, DTI scalar maps revealed significant differences in many regions, suggesting loss of integrity in white and gray matter of spontaneously hypertensive rats when compared to normotensive control rats. In addition, graph theory analysis of the structural brain network demonstrated a significant decrease of hierarchical modularity, global and local efficacy, with predictive value as shown by regional three-fold cross validation study. Moreover, these decreases were significantly correlated with the behavioral performance deficits observed at subsequent time points, suggesting that the diffusion weighted imaging and connectivity studies can unravel neuroimaging alterations even overt signs of cognitive impairment become apparent.

The adequacy of different robust statistical tests in comparing two independent groups

In the current study, we evaluated various robust statistical methods for comparing two independent groups. Two scenarios for simulation were generated: one of equality and another of population mean differences. In each of the scenarios, 33 experimental conditions were used as a function of sample size, standard deviation and asymmetry. For each condition, 5000 replications per group were generated. The results obtained by this study show an adequate type error I rate but not a high power for the confidence intervals. In general, for the two scenarios studied (mean population differences and not mean population differences) in the different conditions analysed, the Mann-Whitney U-test demonstrated strong performance, and a little worse the t-test of Yuen-Welch.

Kartonkimateriaalien muotoutuvuus vuokien valmistuksessa

Diplomityön tavoitteena oli tutkia erilaisten elintarvikekartonkien muotoutuvuutta prässäämällä valmistettujen vuokien valmistuksessa. Kirjallisuusosassa käsiteltiin mm. kartongin muotoutuvuuteen vaikuttavia ominaisuuksia sekä lämpötilan ja kosteuden vaikutusta muotoutuvuuteen. Lisäksi kirjallisuusosassa käytiin läpi vuokien valmistusprosessi, jossa vuoka-aihiot valmistetaan stanssaamalla ja vuoat prässäämällä. Lopuksi on esitetty vuokien valmistuksessa kartongin muotoutuvuuteen vaikuttavia ajoparametrejä. Kokeellisessa osassa valmistettiin prässäämällä vuokia erilaisista kartonkimateriaaleista. Jokaiselle materiaalille etsittiin sopivat ajoparametrit erilaisissa kosteuspitoisuuksissa ja vertailtiin niiden muotoutuvuutta. Työ sisälsi myös kaksi laminointikoeajoa, jonka tuloksena saatuja materiaaleja verrattiin referenssi vuokakartonkiin. Vuokien todettiin muotoutuvan parhaiten kosteuden ollessa 7 – 9,4 % välillä. Työssä erottui kartongit, jotka muotoutuivat muita paremmin sekä kartongit, jotka muotoutuivat muita huonommin. Näiden muotoutuvuutta pyrittiin selvittämään mitattujen paperiteknisten ominaisuuksien avulla, mutta selvää yksittäistä selittävää ominaisuutta ei löytynyt. Parhaiten muotoutuvuutta kuvasivat kartonkien kuitukoostumukset. Laminoitujen rakenteiden todettiin muotoutuvan vuokakartonkia paremmin. Tähän vaikuttivat laminaattien korkeammat lujuus- ja venymäarvot.

Insulation System in an Integrated Motor Compressor

A high-speed and high-voltage solid-rotor induction machine provides beneficial features for natural gas compressor technology. The mechanical robustness of the machine enables its use in an integrated motor-compressor. The technology uses a centrifugal compressor, which is mounted on the same shaft with the high-speed electrical machine driving it. No gearbox is needed as the speed is determined by the frequency converter. The cooling is provided by the process gas, which flows through the motor and is capable of transferring the heat away from the motor. The technology has been used in the compressors in the natural gas supply chain in the central Europe. New areas of application include natural gas compressors working at the wellheads of the subsea gas reservoir. A key challenge for the design of such a motor is the resistance of the stator insulation to the raw natural gas from the well. The gas contains water and heavy hydrocarbon compounds and it is far harsher than the sales gas in the natural gas supply network. The objective of this doctoral thesis is to discuss the resistance of the insulation to the raw natural gas and the phenomena degrading the insulation. The presence of partial discharges is analyzed in this doctoral dissertation. The breakdown voltage of the gas is measured as a function of pressure and gap distance. The partial discharge activity is measured on small samples representing the windings of the machine. The electrical field behavior is also modeled by finite element methods. Based on the measurements it has been concluded that the discharges are expected to disappear at gas pressures above 4 – 5 bar. The disappearance of discharges is caused by the breakdown strength of the gas, which increases as the pressure increases. Based on the finite element analysis, the physical length of a discharge seen in the PD measurements at atmospheric pressure was approximated to be 40 – 120 m. The chemical aging of the insulation when exposed to raw natural gas is discussed based on a vast set of experimental tests with the gas mixture representing the real gas mixture at the wellhead. The mixture was created by mixing dry hydrocarbon gas, heavy hydrocarbon compounds, monoethylene glycol, and water. The mixture was chosen to be more aggressive by increasing the amount of liquid substances. Furthermore, the temperature and pressure were increased, which resulted in accelerated test conditions. The time required to detect severe degradation was thus decreased. The test program included a comparison of materials, an analysis of the e ects of di erent compounds in the gas mixture, namely water and heavy hydrocarbons, on the aging, an analysis of the e ects of temperature and exposure duration, and also an analysis on the e ect of sudden pressure changes on the degradation of the insulating materials. It was found in the tests that an insulation consisting of mica, glass, and epoxy resin can tolerate the raw natural gas, but it experiences some degradation. The key material in the composite insulation is the resin, which largely defines the performance of the insulation system. The degradation of the insulation is mostly determined by the amount of gas mixture di used into it. The di usion was seen to follow Fick’s second law, but the coe cients were not accurately defined. The di usion was not sensitive to temperature, but it was dependent upon the thermodynamic state of the gas mixture, in other words, the amounts of liquid components in the gas. The weight increase observed was mostly related to heavy hydrocarbon compounds, which act as plasticizers in the epoxy resin. The di usion of these compounds is determined by the crosslink density of the resin. Water causes slight changes in the chemical structure, but these changes do not significantly contribute to the aging phenomena. Sudden changes in pressure can lead to severe damages in the insulation, because the motion of the di used gas is able to create internal cracks in the insulation. Therefore, the di usion only reduces the mechanical strength of the insulation, but the ultimate breakdown can potentially be caused by a sudden drop in the pressure of the process gas.

Lujasta rakenneteräksestä tehdyn rakenteen vikasietoisuuden määritys

Tässä työssä tutkittiin Ruukin valmistamista lujista Optim 700 MC Plus sekä Optim 700 QL teräksistä tehtyjen hitsattujen palkkirakenteiden vikasietoisuutta sekä murtumiskäyttäytymistä laboratoriossa suoritettujen täyden mittakaavan kokeiden avulla. Koerakenteet suunniteltiin siten, että rakenteen kylmämuovauksen sekä hitsauksen vaikutukset yhdessä rakenteen geometrian vaikutuksen kanssa heikentävät rakenteen murtumissitkeyttä rakenteeseen tehdyn teräväkärkisen alkusärön tasossa. Suunnitellussa koesarjassa varioidaan testauslämpötilan lisäksi hitsauksen lämmöntuontia sekä koerakenteeseen tehtävän alkusärön kokoa. Tässä työssä tavoitteena oli yleisesti esittää menettely hitsatun säröllisen teräsrakenteen kestävyyden arviointia varten. Optim 700 MC Plus teräksestä tehdyn koerakenteen käyttäytymistä tutkittiin laskennallisesti murtumismekaniikan avulla. Laadittujen FEM - mallien avulla laskettiin rakenteen murtumisparametrien arvot kummallekin tutkittavalle teräkselle. Optim 700 MC Plus materiaalista valmistetuille koerakenteen säröalueen rakennedetaljia vastaavalle koekappaleille suoritettiin murtumissitkeyskokeita. Murtumissitkeyskokeista saatujen tulosten avulla pystyttiin kuvaamaan täyden mittakaavan koerakenteessa olevan särön murtumiskäyttäytymistä mitoitusmenetelmissä. Koerakenteelle laskettiin tässä työssä kriittisen särökoon ja sitä vastaavan kuorman arvot perustuen rakenteen oletettuun hauraaseen, epästabiiliin sitkeään sekä plastiseen murtumiskäyttäytymiseen. Tässä työssä testattiin molemmista tutkittavista materiaaleista valmistetut täyden mittakaavan koerakenteet -40 °C lämpötilassa. Molemmat testatut rakenteet käyttäytyvät mitattujen siirtymätulosten perusteella melko hauraasti. Optim 700 MC Plus materiaalille saatujen laskentatulosten voidaan todeta testatun koekappaleen perusteella soveltuvan hauraasti käyttäytyvän rakenteen mitoitukseen.

National Library and Library Network in Finland - Cooperation Being the Driving Force of Success

Kristiina Hormia-Poutasen esitys Danish Research Association -tapahtumassa Tanskassa 15.9.2011

Static tests of constructive tires using hydraulic press on the soil

ABSTRACT The power consumption and load capacity of agricultural machines have grown and the effects of pressure on the soil by tires have been still little investigated. In concern with sustainable development, the relationship machine-tire-soil must be in balance to give more consistency on the best use of tires for a given load. This study aimed to evaluate four tires of two constructive types, the bias belted tires and radial tires, both with respective rim diameters of 22.5 and 26.5 inches with variables measuring the footprint, elastic deformation, sinkage and resistance to penetration. A hydraulic press with an attachment shaft for tire mounting and a box of soil in which the tire has been imposed on a load of 53.00 kN using nominal pressures recommended by the tire manufacturer. The radial construction tire with rim diameter of 26.5 inches obtained less sinkage and resistance to penetration; however, greater elastic deformation and footprint compared to other tires. The bias-belted tire with 22.5-inch rim presented the highest resistance to penetration and the lowest elastic deformation.

Servo drive in hoist application

The objective of this master thesis is to test according to hoisting requirements, a servo drive system and compare its performance with the performance of a drive equipped with a vector controlled frequency converter. Both systems utilize closed-loop vector control based on PCL program control. In order to compare the results of tests both systems were connected to the same motor driving a variable speed electrical chain hoist. Tests were based on requirements to both systems. As requirements of tests zero speed operation, operation in field weakening, positioning accuracy and smoothness of motion are taken into consideration. Both systems demonstrate quite similar performance and meet the requirements. Servo drive system demonstrates a high positioning accuracy and dynamic performance. Frequency converter is not able to provide the same positioning accuracy and dynamic performance as servo drive.

Social ventures : the development of the theory of sustainable contributive advantage and initial empirical tests

This thesis attempts to fill gaps in both a theoretical basis and an operational and strategic understanding in the areas of social ventures, social entrepreneurship and nonprofit business models. This study also attempts to bridge the gap in strategic and economic theory between social and commercial ventures. More specifically, this thesis explores sustainable competitive advantage from a resource-based theory perspective and explores how it may be applied to the nonmarket situation of nonprofit organizations and social ventures. It is proposed that a social value-orientation of sustainable competitive advantage, called sustainable contributive advantage, provides a more realistic depiction of what is necessary in order for a social venture to perform better than its competitors over time. In addition to providing this realistic depiction, this research provides a substantial theoretical contribution in the area of economics, social ventures, and strategy research, specifically in regards to resource-based theory. The proposed model for sustainable contributive advantage uses resource-based theory and competitive advantage in order to be applicable to social ventures. This model proposes an explanation of a social venture’s ability to demonstrate consistently superior performance. In order to determine whether sustainable competitive advantage is in fact, appropriate to apply to both social and economic environments, quantitative analyses are conducted on a large sample of nonprofit organizations in a single industry and then compared to similar quantitative analyses conducted on commercial ventures. In comparing the trends and strategies between the two types of entities from a quantitative perspective, propositions are developed regarding a social venture’s resource utilization strategies and their possible impact on performance. Evidence is found to support the necessity of adjusting existing models in resource-based theory in order to apply them to social ventures. Additionally supported is the proposed theory of sustainable contributive advantage. The thesis concludes with recommendations for practitioners, researchers and policy makers as well as suggestions for future research paths.