Development of principle culture medium formulations for Saccharomyces cerevisiae

Saccharomyces cerevisiae as well as other microorganisms are frequently used in industry with the purpose of obtain different kind of products that can be applied in several areas (research investigation, pharmaceutical compounds, etc.). In order to obtain high yields for the desired product, it is necessary to make an adequate medium supplementation during the growth of the microorganisms. The higher yields are typically reached by using complex media, however the exact formulation of these media is not known. Moreover, it is difficult to control the exact composition of complex media, leading to batch-to-batch variations. So, to overcome this problem, some industries choose to use defined media, with a defined and known chemical composition. However these kind of media, many times, do not reach the same high yields that are obtained by using complex media. In order to obtain similar yield with defined media the addition of many different compounds has to be tested experimentally. Therefore, the industries use a set of empirical methods with which it is tried to formulate defined media that can reach the same high yields as complex media. In this thesis, a defined medium for Saccharomyces cerevisiae was developed using a rational design approach. In this approach a given metabolic network of Saccharomyces cerevisiae is divided into a several unique and not further decomposable sub networks of metabolic reactions that work coherently in steady state, so called elementary flux modes. The EFMtool algorithm was used in order to calculate the EFM’s for two Saccharomyces cerevisiae metabolic networks (amino acids supplemented metabolic network; amino acids non-supplemented metabolic network). For the supplemented metabolic network 1352172 EFM’s were calculated and then divided into: 1306854 EFM’s producing biomass, and 18582 EFM’s exclusively producing CO2 (cellular respiration). For the non-supplemented network 635 EFM’s were calculated and then divided into: 215 EFM’s producing biomass; 420 EFM’s producing exclusively CO2. The EFM’s of each group were normalized by the respective glucose consumption value. After that, the EFMs’ of the supplemented network were grouped again into: 30 clusters for the 1306854 EFMs producing biomass and, 20 clusters for the 18582 EFM’s producing CO2. For the non-supplemented metabolic network the respective EFM’s of each metabolic function were grouped into 10 clusters. After the clustering step, the concentrations of the other medium compounds were calculated by considering a reasonable glucose amount and by accounting for the proportionality between the compounds concentrations and the glucose ratios. The approach adopted/developed in this thesis may allow a faster and more economical way for media development.

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.

Enhancement of an implemented rating model and impact on existing risk management processes: A hands-on approach from financial supplier risk management within the automotive industry

The purpose of this paper is to conduct a methodical drawback analysis of a financial supplier risk management approach which is currently implemented in the automotive industry. Based on identified methodical flaws, the risk assessment model is further developed by introducing a malus system which incorporates hidden risks into the model and by revising the derivation of the most central risk measure in the current model. Both methodical changes lead to significant enhancements in terms of risk assessment accuracy, supplier identification and workload efficiency.

Strategy of Logoplaste in Mozambique's flexible plastic packaging industry

Logoplaste is a specialist in operating in-house industrial sites for manufacturing rigid plastic packaging containers. In developing countries, especially in Africa, the low income of consumers does not allow a widespread adoption of products typically sold in rigid plastic containers. In these countries the flexible packages are usually adopted as they allow for better ratios of cost/litter of product, particularly in smaller packages. Should Logoplaste offer this type of technology in order to expand into developing countries?

Leishmanicidal activity and cytotoxicity of compounds from two Annonacea species cultivated in Northeastern Brazil

INTRODUCTION: Visceral leishmaniasis is endemic in 88 countries, with a total of 12 million people infected and 350 million at risk. In the search for new leishmanicidal agents, alkaloids and acetogenins isolated from leaves of Annona squamosa and seeds of Annona muricata were tested against promastigote and amastigote forms of Leishmania chagasi. METHODS: Methanol-water (80:20) extracts of A. squamosa leaves and A. muricata seeds were extracted with 10% phosphoric acid and organic solvents to obtain the alkaloid and acetogenin-rich extracts. These extracts were chromatographed on a silica gel column and eluted with a mixture of several solvents in crescent order of polarity. The compounds were identified by spectroscopic analysis. The isolated compounds were tested against Leishmania chagasi, which is responsible for American visceral leishmaniasis, using the MTT test assay. The cytotoxicity assay was evaluated for all isolated compounds, and for this assay, RAW 264.7 cells were used. RESULTS: O-methylarmepavine, a benzylisoquinolinic alkaloid, and a C37 trihydroxy adjacent bistetrahydrofuran acetogenin were isolated from A. squamosa, while two acetogenins, annonacinone and corossolone, were isolated from A. muricata. Against promastigotes, the alkaloid showed an IC50 of 23.3 µg/mL, and the acetogenins showed an IC50 ranging from 25.9 to 37.6 µg/mL; in the amastigote assay, the IC50 values ranged from 13.5 to 28.7 µg/mL. The cytotoxicity assay showed results ranging from 43.5 to 79.9 µg/mL. CONCLUSIONS: These results characterize A. squamosa and A. muricata as potential sources of leishmanicidal agents. Plants from Annonaceae are rich sources of natural compounds and an important tool in the search for new leishmanicidal therapies.

Multi-Enzymatic Systems for Cleaning-up Synthetic Dyes from the Environment

Environmental pollution is one of the major and most important problems of the modern world. In order to fulfill the needs and demands of the overgrowing human population, developments in agriculture, medicine, energy sources, and all chemical industries are necessary (Ali 2010). Over the last century, the increased industrialization and continued population growth led to an augmented production of environmental pollutants that are released into air, water, and soil, with significant impact in the degradation of various ecosystems (Ali 2010, Khan et al. 2013).(...)

Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on carbonate stones

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Do social factors matter for innovation, and do they influence innovation in Aeronautics Industry?

Based on the report for the course on “Social Factors of Innovation” of the PhD Program on Technology Assessment, supervised by Prof. António Brandão Moniz, Monte de Caparica, University NOVA Lisbon, Faculty of Sciences and Technology, July 2013

A business model for an entertainment solution to the in-vehicle infotainment industry

The evolution of mobile technologies that make its presence something ubiquitous and the idea of internet connectivity in every device, often called as the Internet of Things, are pushing a disruption in other industry: the in-vehicle infotainment (IVI). Many companies are trying to enter this new industry that comprises information (weather, news, location services) and entertainment solutions in just one. For that purpose, company X developed a new entertainment solution and intends to bring it to market. This Work Project focuses on creating a business model and an entry mode for the company.

Hotel industry: An answer to the emerging trends on the global demand side of tourism

This dissertation studies essentially how Millennials are changing the hotel industry, in the sense that new trends are emerging with this generation and hotels need to respond accordingly, in order to survive within their competitive industry. Emphasis is also given to Asian travellers, as the enlargement of these countries’ middle class populations is predicted, therefore making Asian travellers a valuable target for the hotel industry. To successfully target this segment, hoteliers need also to consider the cultural differences and aspirations that come together with the Asian travellers, and appropriately adapt their offer to them. I will then redirect this study to the city of Lisbon, the Portuguese capital, to analyse if Lisbon’s four and five-star hotel managers are aware of the new market trends, and to understand how they are changing their hotels in order to make them more attractive to Millennials and Asian travellers. Using a sample of 12 hotels (four and five-stars ratings), I have concluded that, although there is a notable undergoing process of adaptation to these guests, there is a long way ahead in order for Lisbon’s hotels to entirely please and retain millennial guests.

Escalation of conflict in FMCG industry: A negotiation case

This work project develops a case-study to be used in Negotiation courses, both in Masters programs and in executive education workshops. The case-study is based on a real-life negotiating situation in Belgium between Unilever, the second largest Fast Moving Consumer Goods (FMCG) company in the world, and Delhaize, one of the most important Belgium’s retailers, with a significant international presence. We also present an analysis of the negotiation based on relevant literature. First, a brief literature review is presented about how to deal with multiple-issue negotiations and how to deal with processes of escalation of conflict. These concepts are then applied to the analysis of the case-study.

A business plan for a new mobile application to the consumer foodservice industry

The Portuguese consumer foodservice industry is experiencing a boost in technology adoption, driven by significant changes in consumer behavior and business dynamics, due to mobile increasing penetration. Accordingly, the present work project consists on developing a business plan for meeting an identified opportunity in the technological foodservice landscape. Therefore, this report is divided into three sections, each of which addressing different objectives: (A) External Environment, providing key external insights that support the opportunity; (B) Strategy Formulation, establishing a strategic direction; and (C) Action Plan, determining an implementation plan for starting the business

Financial reporting and inventory disclosure in the extractive industry

Companies in the Extractive Industry (E.I) have some particularities and special regulation that provides an interesting study of inventory and reporting in their financial statements. The theme thus chosen here, aims to make a comparison of the various methods of reporting inventories (recognition, measurement, presentation and disclosures) as well as the different accounting regulations in place. Moreover, inventories are a current asset which represents a large per cent of total assets. Another is that it also provides an opportunity for analysis of the different regulations in place for disclosures; the different standards implemented- IAS, US GAAP and/or regional standards.

IPO impact on industry incumbents

The creation of an innovative company is suggestive of change in an industry. To test that change this paper tests the impact of IPOs on industry incumbents. IPOs are found to happen in industries that exhibited positive abnormal returns for up to 5 years before the IPO date. The IPO date is found to coincide with the end of that industry abnormal return profile. This paper suggests this evidence is consistent with the IPO acting as mechanism of enforcing market efficiency at the industry level.

East African Breweries LTD Alcoholic beverages industry

Equity research report