Effect of Strain Rate on Evolution of the Deformation Microstructure and Texture in Polycrystalline Copper and Nickel

The evolution of crystallographic texture in polycrystalline copper and nickel has been studied. The deformation texture evolution in these two materials over seven orders of magnitude of strain rate from 3 x 10(-4) to similar to 2.0 x 10(+3) s(-1) show little dependence on the stacking fault energy (SFE) and the amount of deformation. Higher strain rate deformation in nickel leads to weakerh < 101 > texture because of extensive microband formation and grain fragmentation. This behavior, in turn, causes less plastic spin and hence retards texture evolution. Copper maintains the stable end < 101 > component over large strain rates (from 3 x 10(-4) to 10(+2) s(-1)) because of its higher strain-hardening rate that resists formation of deformation heterogeneities. At higher strain rates of the order of 2 x 10(+3) s(-1), the adiabatic temperature rise assists in continuous dynamic recrystallization that leads to an increase in the volume fraction of the < 101 > component. Thus, strain-hardening behavior plays a significant role in the texture evolution of face-centered cubic materials. In addition, factors governing the onset of restoration mechanisms like purity and melting point govern texture evolution at high strain rates. SFE may play a secondary role by governing the propensity of cross slip that in turn helps in the activation of restoration processes.

High-Temperature (1023 K to 1273 K 750 degrees C to 1000 degrees C]) Plastic Deformation Behavior of B-Modified Ti-6Al-4V Alloys: Temperature and Strain Rate Effects

A minor addition of B to the Ti-6Al-4V alloy, by similar to 0.1 wt pct, reduces its as-cast prior beta grain size by an order of magnitude, whereas higher B content leads to the presence of in situ formed TiB needles in significant amounts. An experimental investigation into the role played by these microstructural modifications on the high-temperature deformation behavior of Ti-6Al-4V-xB alloys, with x varying between 0 wt pct and 0.55 wt pct, was conducted. Uniaxial compression tests were performed in the temperature range of 1023 K to 1273 K (750 degrees C to 1000 degrees C) and in the strain rate range of 10(-3) to 10(+1) s(-1). True stress-true strain responses of all alloys exhibit flow softening at lower strain rates and oscillations at higher strain rates. The flow softening is aided by the occurrence of dynamic recrystallization through lath globularization in high temperature (1173 K to 1273 K 900 degrees C to 1000 degrees C]) and a lower strain rate (10(-2) to 10(-3) s(-1)) regime. The grain size refinement with the B addition to Ti64, despite being marked, had no significant effect on this. Oscillations in the flow curve at a higher strain rate (10(0) to 10(+1) s(-1)), however, are associated with microstructural instabilities such as bending of laths, breaking of lath boundaries, generation of cavities, and breakage of TiB needles. The presence of TiB needles affected the instability regime. Microstructural evidence suggests that the matrix cavitation is aided by the easy fracture of TiB needles.

Effect of favorable pressure gradient on transitional spot formation rate

The calculation of the transitional boundary layer requires estimates of the extent of the transition zone, which in turn depends on the rate at which turbulent spots are formed. This rate has been found to scale with local boundary layer thickness and viscosity, and the resulting nondimensional group (called crumble) is a function of the pressure gradient, among other parameters. Available experimental data are analyzed to show that the crumble increases slowly with increasing favorable pressure gradients, being about four times as large as in constant-pressure flow when the Thwaites pressure gradient parameter at the effective origin of the resulting turbulent boundary layer is 0.1 and when transition is driven by free-stream turbulence.

Measurement of the corrosion rate of aluminium in sodium hydroxide using holographic interferometry

The application of holographic interferometry to the measurement of the corrosion rate of aluminium in sodium hydroxide is investigated. Details of the fabrication of the corrosion cell and the experimental procedure are given. Thickness loss of aluminium was found for different dissolution times and compared with the conventional weight-loss method using a microbalance.

Position and Feed-Rate Control for Contouring Numerical-Control Systems

Numerical control (NC) for contouring operations requires precise control of position and feed rate for approximating the contour by linear moves of the cutter. A control scheme, for generating linear moves with desired slopes for the cutter, is described. This scheme provides for nine successive linear moves, and may be either expanded or implemented in succession, for approximating a contour.

Vieraan aksentin arviointi ja mittaaminen suomessa

In the field of second language (L2) acquisition, the term `foreign accent´ is often used to refer to speech characteristics that differ from the pronunciation of native speakers. Foreign accent may affect the intelligibility and perceived comprehensibility of speech and it is also sometimes associated with negative attitudes. The degree of L2 learners foreign accent and the speech characteristics that account for it have previously been studied through speech perception experiments and acoustic measurements. Perception experiments have shown that native listeners are easily able to identify foreign accent in speech. However to date, no studies have been done on the assessment of foreign accent in the speech of non-native speakers of Finnish. The aim of this study is to examine how native speakers of Finnish rate the degree of foreign accentedness in the speech of Russian L2 learners of Finnish. Furthermore, phonetic analysis is used to study the characteristics of speech that affect the perceived strength of foreign accent. Altogether 96 native speakers of Finnish listened to excerpts of read-aloud and spontaneous Finnish speech from ten Russian and six Finnish female speakers. The Russian speakers were intermediate and advanced learners of Finnish and had all immigrated to Finland as adults. Among the listeners, was a group of teachers of Finnish as an L2, and it was presumed that these teachers had been exposed to foreign accent in Finnish and were used to hearing it. The temporal aspects and segmental properties of speech were phonetically analysed in the speech of the Russian speakers in order to measure their effect on the perceived degree of accent. Although wide differences were observed in the use of the rating scale among the listeners, they were still quite unanimous on which speakers had the strongest foreign accent and which had the mildest. The listeners background factors had little effect on their ratings, and the ratings of the teachers of Finnish as an L2 did not differ from those of the other listeners. However, a clear difference was noted in the ratings of the two types of stimuli used in the perception experiment: the read-aloud speech was rated as more strongly accented than the spontaneous speech. It is important to note that the assessment of foreign accent is affected by many factors and their complex interactions in the experimental setting. Futher the study found that, both the temporal aspects of speech, often associated with fluency, and the number of single deviant phonetic segments contributed to the perceived degree of accentedness in the speech of the native Russian speakers.

Rate Control State-of-the-art Survey

The majority of Internet traffic use Transmission Control Protocol (TCP) as the transport level protocol. It provides a reliable ordered byte stream for the applications. However, applications such as live video streaming place an emphasis on timeliness over reliability. Also a smooth sending rate can be desirable over sharp changes in the sending rate. For these applications TCP is not necessarily suitable. Rate control attempts to address the demands of these applications. An important design feature in all rate control mechanisms is TCP friendliness. We should not negatively impact TCP performance since it is still the dominant protocol. Rate Control mechanisms are classified into two different mechanisms: window-based mechanisms and rate-based mechanisms. Window-based mechanisms increase their sending rate after a successful transfer of a window of packets similar to TCP. They typically decrease their sending rate sharply after a packet loss. Rate-based solutions control their sending rate in some other way. A large subset of rate-based solutions are called equation-based solutions. Equation-based solutions have a control equation which provides an allowed sending rate. Typically these rate-based solutions react slower to both packet losses and increases in available bandwidth making their sending rate smoother than that of window-based solutions. This report contains a survey of rate control mechanisms and a discussion of their relative strengths and weaknesses. A section is dedicated to a discussion on the enhancements in wireless environments. Another topic in the report is bandwidth estimation. Bandwidth estimation is divided into capacity estimation and available bandwidth estimation. We describe techniques that enable the calculation of a fair sending rate that can be used to create novel rate control mechanisms.

Rhetoric and public speech in English republicanism, 1642-1681

The study analyses the ambivalent relationship republicanism, as a form of self-government free from domination, had with the ideal of participatory oratory and non-dominated speech on the one hand, and with the danger of unhindered demagogy and its possibly fatal consequences to that form of government on the other. Although previous scholarship has delved deeply into republicanism as well as into rhetoric and public speech, the interplay between those aspects has only gathered scattered interest, and there has been no systematic study considering the variety of republican approaches to rhetoric and public speech in 17th-century England. The rare attempts to do so have been studies in English literature, and they have not analysed the political philosophy of republicanism, as the focus has been on republicanism as a literary culture. This study connects the fields of political theory, political history as well as literature in order to make a multidisciplinary contribution to intellectual history. The study shows that, within the tradition of classical republicanism, individual authors could make different choices when addressing the problematic topics of public speech and rhetoric, and the variety of their conclusions often set the authors against each other, resulting in the development of their theories through internal debates within the republican tradition. The authors under study were chosen to reflect this variety and the connections between them: the similarities between James Harrington and John Streater, and between John Milton and John Hall of Durham are shown, as well the controversies between Harrington and Milton, and Streater and Hall, respectively. In addition, by analysing the writings of Marchamont Nedham the study will show that the choices were not limited to more, or less, democratic brands of republicanism. Most significantly, the study provides a thorough analysis of the political philosophies behind the various brands of republicanism, in addition to describing them. By means of this analysis, the study shows that previous attempts to assess the role of free speech and public debate, through the lenses of modern, rights-based liberal political theory have resulted in an inappropriate framework for understanding early modern English republicanism. By approaching the topics through concepts used by the republicans legitimate authority, leadership by oratory, and republican freedom and through the frames of reference available and familiar to them roles of education and institutions the study presents a thorough and systematic analysis of the role and function of rhetoric and public speech in English republicanism. The findings of this analysis have significant consequences to our current understanding of the history and development of republican political theory, and, more generally, of the connections between democratic theory and free speech.

Continuity of plastic strain rate in stress relaxation tests

Stress relaxation testing is often utilised for determining whether athermal straining contributes to plastic flow; if plastic strain rate is continuous across the transition from tension to relaxation then plastic strain is fully thermally activated. This method was applied to an aged type 316 stainless steel tested in the temperature range 973–1123 K and to a high purity Al in the recrystallised annealed condition tested in the temperature range 274–417 K. The results indicated that plastic strain is thermally activated in these materials at these corresponding test temperatures. For Al, because of its high strain rate sensitivity, it was necessary to adopt a back extrapolation procedure to correct for the finite period that the crosshead requires to decelerate from the constant speed during tension to a dead stop for stress relaxation.

Kinetics of ceric ion oxidation of naphthalene and its derivatives. Formation of the radical cation intermediate in the rate limiting step

Ceric ammonium sulfate, CAS, oxidizes naphthalene to 1,4-naphthoquinone in essentially quantitative yield in CH3CN-dil. H2SO4. Stoichiometric studies indicate that 6 mol of CAS are required for the oxidation of 1 mol of naphthalene to 1,4-naphthoquinone. Kinetic investigations reveal that the reaction takes place through initial formation of a 1:1 complex of naphthalene and cerium(IV) in an equilibrium step followed by slow decomposition of the complex to naphthalene radical cation. Kinetic results on the effects of acid strength, polarity of the medium, temperature and substituents are in accordance with this mechanism. Further conversion of the radical cation into 1,4-naphthoquinone takes place in fast steps involving a further 5 mol of cerium(IV) and 2 mol of H2O.

Microstructural features of flow instability in α-titanium cylinders under high strain rate compression at 25°C to 400°C

Cylindrical specimens of commercial pure titanium have been compressed at strain rates in the range of 0.1 to 100 s-1 and temperatures in the range of 25-degrees-C to 400-degrees-C. At strain rates of 10 and 100 s-1, the specimens exhibited adiabatic shear bands. At lower strain rates, the material deformed in an inhomogeneous fashion. These material-related instabilities are examined in the light of the ''phenomenological model'' and the ''dynamic materials mode.'' It is found that the regime of adiabatic shear band formation is predicted by the phenomenological model, while the dynamic materials model is able to predict the inhomogeneous deformation zone. The criterion based on power partitioning is competent to predict the variations within the inhomogeneous deformation zone.

Adaptive Keeper Design for Dynamic Logic Circuits Using Rate Sensing Technique

The increasing variability in device leakage has made the design of keepers for wide OR structures a challenging task. The conventional feedback keepers (CONV) can no longer improve the performance of wide dynamic gates for the future technologies. In this paper, we propose an adaptive keeper technique called rate sensing keeper (RSK) that enables faster switching and tracks the variation across different process corners. It can switch upto 1.9x faster (for 20 legs) than CONV and can scale upto 32 legs as against 20 legs for CONV in a 130-nm 1.2-V process. The delay tracking is within 8% across the different process corners. We demonstrate the circuit operation of RSK using a 32 x 8 register file implemented in an industrial 130-nm 1.2-V CMOS process. The performance of individual dynamic logic gates are also evaluated on chip for various keeper techniques. We show that the RSK technique gives superior performance compared to the other alternatives such as Conditional Keeper (CKP) and current mirror-based keeper (LCR).

Part-of-Speech Tagging using Parallel Weighted Finite-State Transducers

We use parallel weighted finite-state transducers to implement a part-of-speech tagger, which obtains state-of-the-art accuracy when used to tag the Europarl corpora for Finnish, Swedish and English. Our system consists of a weighted lexicon and a guesser combined with a bigram model factored into two weighted transducers. We use both lemmas and tag sequences in the bigram model, which guarantees reliable bigram estimates.