Managing reforestation to sequester carbon, increase biodiversity potential and minimize loss of agricultural land

Reforestation will have important consequences for the global challenges of mitigating climate change, arresting habitat decline and ensuring food security. We examined field-scale trade-offs between carbon sequestration of tree plantings and biodiversity potential and loss of agricultural land. Extensive surveys of reforestation across temperate and tropical Australia (N = 1491 plantings) were used to determine how planting width and species mix affect carbon sequestration during early development (< 15 year). Carbon accumulation per area increased significantly with decreasing planting width and with increasing proportion of eucalypts (the predominant over-storey genus). Highest biodiversity potential was achieved through block plantings (width > 40 m) with about 25% of planted individuals being eucalypts. Carbon and biodiversity goals were balanced in mixed-species plantings by establishing narrow belts (width < 20 m) with a high proportion (>75%) of eucalypts, and in monocultures of mallee eucalypt plantings by using the widest belts (ca. 6–20 m). Impacts on agriculture were minimized by planting narrow belts (ca. 4 m) of mallee eucalypt monocultures, which had the highest carbon sequestering efficiency. A plausible scenario where only 5% of highly-cleared areas (<30% native vegetation cover remaining) of temperate Australia are reforested showed substantial mitigation potential. Total carbon sequestration after 15 years was up to 25 Mt CO2-e year−1 when carbon and biodiversity goals were balanced and 13 Mt CO2-e year−1 if block plantings of highest biodiversity potential were established. Even when reforestation was restricted to marginal agricultural land (<$2000 ha−1 land value, 28% of the land under agriculture in Australia), total mitigation potential after 15 years was 17–26 Mt CO2-e year−1 using narrow belts of mallee plantings. This work provides guidance on land use to governments and planners. We show that the multiple benefits of young tree plantings can be balanced by manipulating planting width and species choice at establishment. In highly-cleared areas, such plantings can sequester substantial biomass carbon while improving biodiversity and causing negligible loss of agricultural land.

Call for a meeting of the congregation to elect a trustee in place of Isaac Gomez

Digital image

Sale of ship "Farmer" to Isaac M. Gomez by Joao Jose da Silva

Digital image

Copy of 1794 bill of sale of the ship "Farmer"

Digital image

Ett' varttuisi Suomenmaa : Suomalaisten kasvattaminen kulutusyhteiskuntaan kotimaisissa lyhytelokuvissa 1920-1969

The birth of the Modern Consumer Society in Finnish short films 1920-1969 The main subject of this research is Finnish short films in 1920-1969. These short films were produced by film studios for private enterprises, banks, advisory organizations, communities and the state. The evolution of short films on consumer affairs was greatly influenced by a special tax reduction system that was introduced in 1933 and lasted until 1964. The tax reduction system increased the production volumes of educational short films significantly. This study covers 342 Finnish short films, more than any other study in the field before this. The aim of this research is to examine how short films introduced Finns to modern consumer society. The cinemagoers were an excellent target group for different advisory groups as well as advertisers. Short films were used by organizations and private enterprises from very early on. In the 1920's Finns were still living in rural areas and agriculture was the dominant industry. Consumer society was still in its infancy, and the prevalent attitude to industrially produced goods was that of suspicion. From the cultural and ideological point of view the evolution of trust was one of the first steps towards the birth of the consumer society. Short films were an excellent means for helping to transform public attitudes. During the war period short films were an important means of propaganda. Short films were produced in abundance and shown for big audiences. They guided people how to survive shortages caused by the war. Even though the idea of rationalization was presented in short films somewhat in the 1920's and 1930's it became a national virtue during the war period. The idea of rationalization widened from the industry to households expecially in the late 1940's and the 1950's. New household apparati and the way in which daily chores were taken care of were presented not as luxury consumption but as a way of rationalization and saving money and effort. Banks and the advisory organizations guided the public to save their money for a specific target. Short films were use to help the public to acceps industrial goods and the notions of planning and saving. The ideological change from an agrarian society to consumer society was based on old acricultural ideas and self-sufficiency was evolved into rational and economizing consumerism. This made Finnish consumer society to value durable consumer goods and own homes. The public was also encouraged to consider their own decisions in the national context - especially after the second world war Finland laced capital, and personal savings were strongly presented as a way to help the whole nation. Modern hedonistic values were not dominant in Finland in the1950's and 1960's. Initial traces of modern hedonism can be seen in the films, but they were only marginal paths in the bigger.

Herrat, jätkät ja sotataito : Kansalaissotilas- ja ammattisotilasarmeijan rakentuminen 1920- ja 1930-luvulla

Gentlemen, Lads and the Art of War The Construction of Citizen Soldier- and Professional Soldier Armies into the Miracle of the Winter War During the 1920s and 1930s The Miracle of the Winter War was not a myth - at least according to them, who were making that miracle to happen. This study is not just about the Armed Forces and society, but moreover a study about civil society inside the organization of armed forces. Conscription kept Finnish military organization (and is still keeping) very closely connected with civil society and therefore there is no need to locate the possible critical misunderstandings brought by two different identity-based approaches. The great performance of the Armed Forces during the Second World War was not made of superior art of war. It was not the high level of discipline either. Art of war is basically a (deep level) cultural level equation that has more to do with culturally absorbed schemes of meaning making than rational decision-making. Naturally attrition based approach to effect-making directed the organizational methods in attrition based organisational practices, where there were only minor possibilities to practice any manoeuvre-based organisational behaviour. The practice and method of leadership lent similarly to the attrition-based thinking, which directed the organisational cultural thoughts towards composition that confirmed antagonism between gentlemen and lads . This setting has been absorbed and learned through cultural socialisation and was therefore not a product of the military organisation itself. The Finnish Armed Forces included two different communities (gentlemen and lads) within the same organisation as there were both the official and the unofficial organisations presented. This caused problems as they both made meaning-making processes simultaneously. These organisations had their own overlapping and in most cases also contradictory social meanings. The unofficial organisation has been overshadowed by the vast number of studies concerning the official organisation. The main reason for this systematic neglect is based on the reality of the attitudes and living conditions of the micro-level organisation which produced (perhaps) too realistic and repulsive viewpoints that are presenting a picture of a national level identity process in a way that is separating it from the ideals made to verify the ethos of national values. Complaining, griping, grumbling and moaning are usually situated in a category of abnormal and unwanted behaviour. However, within the context of a citizen soldier army community this was more of a characteristic feature of that organisation (in Finland) and therefore it was crucially important to locate the context of that abnormal behaviour. According to this study, it was not a malicious act but moreover seriously formed efforts in trying to use common sense in the chaos citizen soldiers faced when they were uniformed and placed in an unfamiliar process of disciplinary measures and frictions and competition between different ranks. There is much evidence that reinforces the argument that what seemed to be the most unconventional behaviour was finally the most efficient in a sense of military performance.

Acoustic emission source location and damage detection in a metallic structure using a graph-theory-based geodesic pproach

A geodesic-based approach using Lamb waves is proposed to locate the acoustic emission (AE) source and damage in an isotropic metallic structure. In the case of the AE (passive) technique, the elastic waves take the shortest path from the source to the sensor array distributed in the structure. The geodesics are computed on the meshed surface of the structure using graph theory based on Dijkstra's algorithm. By propagating the waves in reverse virtually from these sensors along the geodesic path and by locating the first intersection point of these waves, one can get the AE source location. The same approach is extended for detection of damage in a structure. The wave response matrix of the given sensor configuration for the healthy and the damaged structure is obtained experimentally. The healthy and damage response matrix is compared and their difference gives the information about the reflection of waves from the damage. These waves are backpropagated from the sensors and the above method is used to locate the damage by finding the point where intersection of geodesics occurs. In this work, the geodesic approach is shown to be suitable to obtain a practicable source location solution in a more general set-up on any arbitrary surface containing finite discontinuities. Experiments were conducted on aluminum specimens of simple and complex geometry to validate this new method.

Energy harvesting using ionic electro-active polymer thin films with Ag-based electrodes

In this paper we employ the phenomenon of bending deformation induced transport of cations via the polymer chains in the thickness direction of an electro-active polymer (EAP)-metal composite thin film for mechanical energy harvesting. While EAPs have been applied in the past in actuators and artificial muscles, promising applications of such materials in hydrodynamic and vibratory energy harvesting are reported in this paper. For this, functionalization of EAPs with metal electrodes is the key factor in improving the energy harvesting efficiency. Unlike Pt-based electrodes, Ag-based electrodes have been deposited on an EAP membrane made of Nafion. The developed ionic metal polymer composite (IPMC) membrane is subjected to a dynamic bending load, hydrodynamically, and evaluated for the voltage generated against an external electrical load. An increase of a few orders of magnitude has been observed in the harvested energy density and power density in air, deionized water and in electrolyte solutions with varying concentrations of sodium chloride (NaCl) as compared to Pt-based IPMC performances reported in the published literature. This will have potential applications in hydrodynamic and residual environmental energy harvesting to power sensors and actuators based on micro-andn nano-electro-mechanical systems (MEMS and NEMS) for biomedical,maerospace and oceanic applications.

TOTEM Physics

This article discusses the physics programme of the TOTEM experiment at the LHC. A new special beam optics with beta* = 90 m, enabling the measurements of the total cross-section, elastic pp scattering and diffractive phenomena already at early LHC runs, is explained. For this and the various other TOTEM running scenarios, the acceptances of the leading proton detectors and of the forward tracking stations for some physics processes are described.

Dimethyl sulphoxide complexes of lanthanide and yttrium nitrates

Dimethyl sulphoxide complexes of lanthanide and yttrium nitrates of the general formula M(DMSO)n(NO3)3 where M = La, Ce, Pr, Nd, Sm or Gd; n = 4 and M = Y, Ho or Yb; n = 3 have been isolated and characterized. The i.r. data besides excluding the presence of D3h nitrate, reveal co-ordination through the oxygen atom of the dimethyl sulphoxide. The complexes are monomeric in acetonitrile. Molecular conductance data in acetone, acetonitrile, dimethyl formamide and dimethyl sulphoxide suggest a co-ordination number of eight for the lighter lanthanides and seven for yttrium and the heavier lanthanides.

An Experimental Study of Home Gateway Characteristics

Many residential and small business users connect to the Internet via home gateways, such as DSL and cable modems. The characteristics of these devices heavily influence the quality and performance of the Internet service that these users receive. Anecdotal evidence suggests that an extremely diverse set of behaviors exists in the deployed base, forcing application developers to design for the lowest common denominator. This paper experimentally analyzes some characteristics of a substantial number of different home gateways: binding timeouts, queuing delays, throughput, protocol support and others.

Kuoleman voimat : Kirkonväki suomalaisessa uskomusperinteessä

Powers of Death. Church-väki in the Finnish Folk Belief Tradition Folk belief tradition can be defined as a communication system in which the truth value of traditional motifs is judged by their usefulness and applicability. According to the Finnish belief tradition, a substance of power called väki resides in sacred elements and in entities which vitally affect human life. Väki is both ritually avoided and harnessed for beneficial or malevolent purposes. The powers of church and death merge in church-väki, which, in beliefs and narratives, emerges when the boundary between the living and the dead is crossed or violated. In rural societies where the relationship to the dying and the deceased was close, the church-väki tradition was relevant and productive. This study is based on approximately 2700 units of archived material from thel late 19th and early 20th centuries narratives, rite descriptions, and linguistic data. It explicates the concept of church-väki, presents the background of the tradition, and analyses narratives, their meanings, and their role in early modern world view. It also explores how the concept was used when constructing social boundaries and handling otherness in the early modern Finland. The theoretic emphasis is on conceptual and genre analysis, narrativity, as well as the multiple meanings and uses of folklore motifs. Descriptions of church-väki vary from it being an invisible force to a crowd of beings and decomposing corpses. The author defines church-väki as a fuzzy concept with three prototypical cores and several names, most of which are polysemous. Polysemous words connect church-väki with for example ghosts and devils, unkempt people, and vermin, constructing a loose paradigm of supernatural and social otherness. Folklore genres of the studied narratives range from stories of personal experience to fabulates. The taleworlds and their content range from realistic (near) to extraordinary (distant). The distance between the taleworld and reality has concrete (local and temporal), narrative, and normative aspects. Distant taleworlds often follow an ontology different than in real life, although the narratives may be carefully linked to reality. Instead of being fictive, they show what would be expected outside the socially constructed everyday order. Methods of narratology are applied to coherent legends, which locate dramatic events in distant taleworlds. Linguistic genres, based on structure, function here as narrative registers of folklore genres.

Growth and characterization of germanium nanowires by electron beam evaporation

Germanium nanowires were grown on Au coated Si substrates at 380 degrees C in a high vacuum (5 x 10(-5) Torr) by e-beam evaporation of Germanium (Ge). The morphology observation by a field emission scanning electron microscope (FESEM) shows that the grown nanowires are randomly oriented with an average length and diameter of 600 nm and 120 nm respectively for a deposition time of 60 min. The nanowire growth ratewas measured to be similar to 10 nm/min. Transmission electron microscope (TEM) studies revealed that the Ge nanowires were single crystalline in nature and further energy dispersive X-ray analysis(EDAX) has shown that the tip of the grown nanowires was capped with Au nanoparticles, this shows that the growth of the Ge nanowires occurs by the vapour liquid solid (VLS) mechanism. HRTEM studies on the grown Ge nanowire show that they are single crystalline in nature and the growth direction was identified to be along [110]. (C) 2010 Elsevier B.V. All rights reserved.

Wave propagation analysis in carbon nanotube embedded composite using wavelet based spectral finite elements

In this paper, elastic wave propagation is studied in a nanocomposite reinforced with multiwall carbon nanotubes (CNTs). Analysis is performed on a representative volume element of square cross section. The frequency content of the exciting signal is at the terahertz level. Here, the composite is modeled as a higher order shear deformable beam using layerwise theory, to account for partial shear stress transfer between the CNTs and the matrix. The walls of the multiwall CNTs are considered to be connected throughout their length by distributed springs, whose stiffness is governed by the van der Waals force acting between the walls of nanotubes. The analyses in both the frequency and time domains are done using the wavelet-based spectral finite element method (WSFEM). The method uses the Daubechies wavelet basis approximation in time to reduce the governing PDE to a set of ODEs. These transformed ODEs are solved using a finite element (FE) technique by deriving an exact interpolating function in the transformed domain to obtain the exact dynamic stiffness matrix. Numerical analyses are performed to study the spectrum and dispersion relations for different matrix materials and also for different beam models. The effects of partial shear stress transfer between CNTs and matrix on the frequency response function (FRF) and the time response due to broadband impulse loading are investigated for different matrix materials. The simultaneous existence of four coupled propagating modes in a double-walled CNT-composite is also captured using modulated sinusoidal excitation.

The hardness of approximating the boxicity, cubicity and threshold dimension of a graph

A k-dimensional box is the Cartesian product R-1 X R-2 X ... X R-k where each R-i is a closed interval on the real line. The boxicity of a graph G, denoted as box(G), is the minimum integer k such that G can be represented as the intersection graph of a collection of k-dimensional boxes. A unit cube in k-dimensional space or a k-cube is defined as the Cartesian product R-1 X R-2 X ... X R-k where each R-i is a closed interval oil the real line of the form a(i), a(i) + 1]. The cubicity of G, denoted as cub(G), is the minimum integer k such that G can be represented as the intersection graph of a collection of k-cubes. The threshold dimension of a graph G(V, E) is the smallest integer k such that E can be covered by k threshold spanning subgraphs of G. In this paper we will show that there exists no polynomial-time algorithm for approximating the threshold dimension of a graph on n vertices with a factor of O(n(0.5-epsilon)) for any epsilon > 0 unless NP = ZPP. From this result we will show that there exists no polynomial-time algorithm for approximating the boxicity and the cubicity of a graph on n vertices with factor O(n(0.5-epsilon)) for any epsilon > 0 unless NP = ZPP. In fact all these hardness results hold even for a highly structured class of graphs, namely the split graphs. We will also show that it is NP-complete to determine whether a given split graph has boxicity at most 3. (C) 2010 Elsevier B.V. All rights reserved.