843 resultados para Defect introduction and removal process


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Given the growing number of wrongful convictions involving faulty eyewitness evidence and the strong reliance by jurors on eyewitness testimony, researchers have sought to develop safeguards to decrease erroneous identifications. While decades of eyewitness research have led to numerous recommendations for the collection of eyewitness evidence, less is known regarding the psychological processes that govern identification responses. The purpose of the current research was to expand the theoretical knowledge of eyewitness identification decisions by exploring two separate memory theories: signal detection theory and dual-process theory. This was accomplished by examining both system and estimator variables in the context of a novel lineup recognition paradigm. Both theories were also examined in conjunction with confidence to determine whether it might add significantly to the understanding of eyewitness memory. ^ In two separate experiments, both an encoding and a retrieval-based manipulation were chosen to examine the application of theory to eyewitness identification decisions. Dual-process estimates were measured through the use of remember-know judgments (Gardiner & Richardson-Klavehn, 2000). In Experiment 1, the effects of divided attention and lineup presentation format (simultaneous vs. sequential) were examined. In Experiment 2, perceptual distance and lineup response deadline were examined. Overall, the results indicated that discrimination and remember judgments (recollection) were generally affected by variations in encoding quality and response criterion and know judgments (familiarity) were generally affected by variations in retrieval options. Specifically, as encoding quality improved, discrimination ability and judgments of recollection increased; and as the retrieval task became more difficult there was a shift toward lenient choosing and more reliance on familiarity. ^ The application of signal detection theory and dual-process theory in the current experiments produced predictable results on both system and estimator variables. These theories were also compared to measures of general confidence, calibration, and diagnosticity. The application of the additional confidence measures in conjunction with signal detection theory and dual-process theory gave a more in-depth explanation than either theory alone. Therefore, the general conclusion is that eyewitness identifications can be understood in a more complete manor by applying theory and examining confidence. Future directions and policy implications are discussed. ^

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The notion of sediment-transport capacity has been engrained in geomorphological and related literature for over 50 years, although its earliest roots date back explicitly to Gilbert in fluvial geomorphology in the 1870s and implicitly to eighteenth to nineteenth century developments in engineering. Despite cross fertilization between different process domains, there seem to have been independent inventions of the idea in aeolian geomorphology by Bagnold in the 1930s and in hillslope studies by Ellison in the 1940s. Here we review the invention and development of the idea of transport capacity in the fluvial, aeolian, coastal, hillslope, débris flow, and glacial process domains. As these various developments have occurred, different definitions have been used, which makes it both a difficult concept to test, and one that may lead to poor communications between those working in different domains of geomorphology. We argue that the original relation between the power of a flow and its ability to transport sediment can be challenged for three reasons. First, as sediment becomes entrained in a flow, the nature of the flow changes and so it is unreasonable to link the capacity of the water or wind only to the ability of the fluid to move sediment. Secondly, environmental sediment transport is complicated, and the range of processes involved in most movements means that simple relationships are unlikely to hold, not least because the movement of sediment often changes the substrate, which in turn affects the flow conditions. Thirdly, the inherently stochastic nature of sediment transport means that any capacity relationships do not scale either in time or in space. Consequently, new theories of sediment transport are needed to improve understanding and prediction and to guide measurement and management of all geomorphic systems.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Acid stimulated accumulation of insoluble phosphorus within microbial cells is highly beneficial to wastewater treatment but remains largely unexplored. Using single cell analyses and next generation sequencing, the response of active polyphosphate accumulating microbial communities under conditions of enhanced phosphorus uptake under both acidic and aerobic conditions was characterised. Phosphorus accumulation activities were highest under acidic conditions (pH 5.5 > 8.5), where a significant positive effect on bioaccumulation was observed at pH 5.5 when compared to pH 8.5. In contrast to the Betaproteobacteria and Actinobacteria dominated enhanced biological phosphorus removal process, the functionally active polyP accumulators at pH 5.5 belonged to the Gammaproteobacteria, with key accumulators identified as members of the families Aeromonadaceae and Enterobacteriaceae. This study demonstrated a significant enrichment of key polyphosphate kinase and exopolyphosphatase genes within the community metagenome after acidification, concomitant with an increase in P accumulation kinetics.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The process of constituency boundary revision in Ireland, designed to satisfy what is perceived as a rigid requirement that a uniform deputy-population ratio be maintained across constituencies, has traditionally consumed a great deal of the time of politicians and officials. For almost two decades after a High Court ruling in 1961, the process was a political one, was highly contentious, and was marked by serious allegations of ministerial gerrymandering. The introduction in 1979 of constituency commissions made up of officials neutralised, for the most part, charges that the system had become too politicised, but it continued the process of micro-management of constituency boundaries. This article suggests that the continuing problems caused by this system – notably, the permanently changing nature of constituency boundaries and resulting difficulties of geographical identification – could be resolved by reversion to the procedure that is normal in proportional representation systems: periodic post-census allocation of seats to constituencies whose boundaries are based on those of recognised local government units and which are stable over time. This reform, replacing the principle of redistricting by the principle of reapportionment, would result in more recognisable constituencies, more predictable boundary trajectories over time, and a more efficient, fairer, and speedier process of revision.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper proposes the joint use of the AHP (Analytic Hierarchy Process) and the ICB (IPMA Competence Baseline), as a tool for the decision-making process of selecting the most suitable managers for projects. A hierarchical structure, comprising the IPMA’s ICB 3.0 contextual, behavioural and technical competence elements, is constructed for the selection of project managers. It also describes the AHP implementation, illustrating the whole process with an example using all the 46 ICB competence elements as model criteria. This tool can be of high interest to decision-makers because it allows comparing the candidates for managing a project using a systematic and rigorous process with a rich set of proven criteria.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new method for the evaluation of the efficiency of parabolic trough collectors, called Rapid Test Method, is investigated at the Solar Institut Jülich. The basic concept is to carry out measurements under stagnation conditions. This allows a fast and inexpensive process due to the fact that no working fluid is required. With this approach, the temperature reached by the inner wall of the receiver is assumed to be the stagnation temperature and hence the average temperature inside the collector. This leads to a systematic error which can be rectified through the introduction of a correction factor. A model of the collector is simulated with COMSOL Multipyisics to study the size of the correction factor depending on collector geometry and working conditions. The resulting values are compared with experimental data obtained at a test rig at the Solar Institut Jülich. These results do not match with the simulated ones. Consequentially, it was not pos-sible to verify the model. The reliability of both the model with COMSOL Multiphysics and of the measurements are analysed. The influence of the correction factor on the rapid test method is also studied, as well as the possibility of neglecting it by measuring the receiver’s inner wall temperature where it receives the least amount of solar rays. The last two chapters analyse the specific heat capacity as a function of pressure and tem-perature and present some considerations about the uncertainties on the efficiency curve obtained with the Rapid Test Method.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Today, large public investments are being made with the aim of creating and developing cooperation between businesses in inter-organizational networks. Such initiatives are commonly denoted cluster initiatives and their underlying purpose are to spur innovation and regional growth. Much research has been conducted in this field, but relatively few studies have examined the process of cluster initiatives. By following the case of a regional cluster project within the tourism industry in the region of Dalarna, Sweden, the objective of this thesis is to deepen the understanding of the formation and development process of cluster initiatives. The investigation has been conducted by examining two main themes; the internal relationships within the cluster initiative and the relationships between the cluster initiative and its external stakeholders, such as funding agencies, regional government and local businesses. The analysis is based on a legitimacy perspective and indicates that the coordinating body of the cluster initiative, the hub, principally deals with a legitimation process. What occurs within the cluster initiative, between the members themselves and between the members and the hub, is legitimation. This also applies to external relationships, between the hub and its external stakeholders. A prerequisite for the realization of its mission is that the hub obtain and sustain legitimacy; legitimacy for itself, for the other members, for the idea, for the different activities and for the industry as such.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Americans are accustomed to a wide range of data collection in their lives: census, polls, surveys, user registrations, and disclosure forms. When logging onto the Internet, users’ actions are being tracked everywhere: clicking, typing, tapping, swiping, searching, and placing orders. All of this data is stored to create data-driven profiles of each user. Social network sites, furthermore, set the voluntarily sharing of personal data as the default mode of engagement. But people’s time and energy devoted to creating this massive amount of data, on paper and online, are taken for granted. Few people would consider their time and energy spent on data production as labor. Even if some people do acknowledge their labor for data, they believe it is accessory to the activities at hand. In the face of pervasive data collection and the rising time spent on screens, why do people keep ignoring their labor for data? How has labor for data been become invisible, as something that is disregarded by many users? What does invisible labor for data imply for everyday cultural practices in the United States? Invisible Labor for Data addresses these questions. I argue that three intertwined forces contribute to framing data production as being void of labor: data production institutions throughout history, the Internet’s technological infrastructure (especially with the implementation of algorithms), and the multiplication of virtual spaces. There is a common tendency in the framework of human interactions with computers to deprive data and bodies of their materiality. My Introduction and Chapter 1 offer theoretical interventions by reinstating embodied materiality and redefining labor for data as an ongoing process. The middle Chapters present case studies explaining how labor for data is pushed to the margin of the narratives about data production. I focus on a nationwide debate in the 1960s on whether the U.S. should build a databank, contemporary Big Data practices in the data broker and the Internet industries, and the group of people who are hired to produce data for other people’s avatars in the virtual games. I conclude with a discussion on how the new development of crowdsourcing projects may usher in the new chapter in exploiting invisible and discounted labor for data.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introdução: O processo alveolar é o conjunto de osso que se encontra em redor da raiz do dente. Este osso é sensível a uma variedade de fatores ambientais e fisiológicos que influenciam a sua integridade e o seu funcionamento. Como tal, a sua formação assim como a sua preservação é dependente da presença contínua do dente. A reabsorção do processo alveolar após extração dentária é uma consequência natural e fisiológica indesejável, que pode dificultar a colocação de um implante dentário na posição desejada. Com o aumento cada vez mais das demandas estéticas em medicina dentária, torna-se, portanto, necessário prevenir que a reabsorção óssea provoque este defeito na arcada dentária. Objetivos: Realizar uma revisão bibliográfica sobre as várias técnicas e materiais para preservação do rebordo alveolar, a fim de prevenir ou minimizar a reabsorção alveolar após extração dentária. Material e Métodos: A pesquisa foi realizada nas bases de dados Pubmed, B-on e Scielo, não foi aplicado nenhum limite temporal, e os critérios de inclusão foram artigos em língua inglesa e portuguesa. Num total de 164 artigos, selecionaram-se 82 estritamente relacionados com o tema. Os artigos excluídos desviavam-se do objetivo do trabalho ou eram inconclusivos. Selecionaram-se, também, capítulos do livro Clinical Periodontology and Implant Dentistry Volume 1 e 2, dos autores Niklaus P.Lang e Jan Lindhe. Desenvolvimento: De modo a compreender como o processo alveolar reabsorve, deve-se ter em conta as várias técnicas que se podem realizar para permitir uma boa quantidade de osso remanescente na arcada adequada a cada caso para uma possível reabilitação. As técnicas de preservação do osso alveolar após extração passam pela realização de técnicas cirúrgicas minimamente invasivas, estabilização do coágulo pelo princípio da cicatrização por primeira intenção usando membranas ou retalhos, preenchimento do alvéolo dentário com materiais de enxerto ou substitutos ósseos, terapias combinadas com a colocação de implantes imediatos e o recurso a células e fatores de crescimento. Conclusão: A preservação alveolar tem grande importância para uma posterior reabilitação oral com implantes com maior quantidade de osso disponível do que quando não é feita qualquer tipo de preservação. A extração das peças dentárias deve ser feita com cuidado para preservar ao máximo ou não danificar as superfícies ósseas remanescentes. É aconselhado que o encerramento da ferida seja por primeira intenção e que proporcione estabilidade ao coágulo, podendo ser usado retalhos ou mesmo membranas. O uso de enxertos ósseos tem uma importante função de proporcionar uma matriz para o coágulo se formar e promover o processo de cicatrização. O método de implante imediato, para além de ser bastante usado, tem como finalidade o conforto para o paciente de não ser submetido a uma posterior cirurgia para colocação do mesmo e, simultaneamente, mantem a estabilidade dos tecidos moles. Ainda uma técnica menos usada é com células e fatores de crescimento que proporciona uma cicatrização mais rápida e um aumento do potencial regenerativo dos tecidos.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction and background: Survival following critical illness is associated with a significant burden of physical, emotional and psychosocial morbidity. Recovery can be protracted and incomplete, with important and sustained effects upon everyday life, including family life, social participation and return to work. In stark contrast with other critically ill patient groups (eg, those following cardiothoracic surgery), there are comparatively few interventional studies of rehabilitation among the general intensive care unit patient population. This paper outlines the protocol for a sub study of the RECOVER study: a randomised controlled trial evaluating a complex intervention of enhanced ward-based rehabilitation for patients following discharge from intensive care. Methods and analysis: The RELINQUISH study is a nested longitudinal, qualitative study of family support and perceived healthcare needs among RECOVER participants at key stages of the recovery process and at up to 1 year following hospital discharge. Its central premise is that recovery is a dynamic process wherein patients’ needs evolve over time. RELINQUISH is novel in that we will incorporate two parallel strategies into our data analysis: (1) a pragmatic health services-oriented approach, using an a priori analytical construct, the ‘Timing it Right’ framework and (2) a constructivist grounded theory approach which allows the emergence of new themes and theoretical understandings from the data. We will subsequently use Qualitative Health Needs Assessment methodology to inform the development of timely and responsive healthcare interventions throughout the recovery process. Ethics and dissemination: The protocol has been approved by the Lothian Research Ethics Committee (protocol number HSRU011). The study has been added to the UK Clinical Research Network Database (study ID. 9986). The authors will disseminate the findings in peer reviewed publications and to relevant critical care stakeholder groups.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pinctada margaritifera is an economically important marine bivalve species for cultured pearl production in French Polynesian aquaculture. In order to evaluate the influence of donor oyster age on pearl quality traits, experiments were conducted over 6 years using both grafts and surgreffe operations. At harvest, 6 pearl quality traits were recorded and compared: surface defects, luster, grade, darkness level, and visual color. Analyzing the quality traits of pearls harvested in the initial graft process and those of pearls obtained from surgreffe experiments allowed a comparison of the influence of pearl sac cells originating from the initial mantle graft, which aged together with their recipient oysters. The results demonstrated a significant decrease between these successive grafts in luster, grade (A-B-C,) darkness level, and green color – traits that are of major importance in the pearl market. The duplicated graft experiment allowed the comparison of donor oyster families at 2 and 5 years old, where a mantle graft was inserted into recipient oysters aged 2.5 years old. The results showed the same tendencies to a lesser extent, with 1) an improved pearl grade, predominantly through a most important rate of 0 surface defect category, and 2) a green / grey ratio in favor of the younger donor. A comparison between the graft-surgreffe and the duplicated graft experiments also highlighted: 1) the indirect role played by the younger recipient oysters, which must be optimized for optimal pearl quality realization, and 2) the complex interplay between donor and recipient oysters.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Pure Water, is a crucial demand of creature life. Following industrial development, extra amount of toxic metals such as chromium enters the environmental cycle through the sewage, which is considered as a serious threat for organisms. One of the modern methods of filtration and removal of contaminants in water, is applying Nano-technology. According to specific property of silicate materials, in this article we try to survey increased power in composites and various absorption in several morphologies and also synthesis of Nano-metal silicates with different morphologies as absorbent of metal toxic ions. At first, we synthesize nano zink silicate with three morphologies considering context and the purpose of this survey. 1) Nano synthesis of zink silicate hollow cavity by hydrothermal method in mixed solvent system of ethanol/glycol polyethylene. 2) Zink nano wires silicate in a water-based system by controlling the amount of sodium silicate. 3) Synthesis of nano zink silicate membrane. After synthesizing, we measured the cadmium ion absorbance by synthesized nano zink silicates. Controlling PH, is the applied absorption method. Next step, we synthesized nano zink-magnesium silicate composite in two various morphologies of nanowires and membrane by different precent of zink and magnesium, in order to optimize synthesized nano metal silicate. We used zink nitrate and magnesium nitrate and also measured cadmium absorption by synthesized nano metal silicates in the same way of PH control absorption. In the 3rd step, in order to determine the impact of the type of metal in nano metal silicate, we synthesized nano magnesium silicate and compared its absorption with nano zink silicate. Furthermore, we calculated the optimal concentration in one of synthesizes. Optimal concentration is the process which has the maximum absorption. While applying two methods of absorption in the test, finally we compared the effect of absorption method on the absorption level. Below you find further steps of synthesis: 1) Using IR, RAMAN, XRD spectroscopy to check the accuracy of synthesis. 2) Checking the dispersion of nano particles in ethanol solution by light microscope. 3) Measuring and observing particles with scanning electron microscope (SEM). 4) Using atomic absorption device for measuring the cadmium concentration in water-based solutions. The nano metal silicates were synthesized successfully. All of synthesized nano absorbents have the cadmium ion absorbency. The cadmium absorption via nano absorbents depend on various factors such as kind of metal in nano silicate and percent of metal in nano metal silicate composite. Meanwhile the absorption and PH control of medium containing the absorbent and solution would affect the cadmium absorption.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Strawberries harvested for processing as frozen fruits are currently de-calyxed manually in the field. This process requires the removal of the stem cap with green leaves (i.e. the calyx) and incurs many disadvantages when performed by hand. Not only does it necessitate the need to maintain cutting tool sanitation, but it also increases labor time and exposure of the de-capped strawberries before in-plant processing. This leads to labor inefficiency and decreased harvest yield. By moving the calyx removal process from the fields to the processing plants, this new practice would reduce field labor and improve management and logistics, while increasing annual yield. As labor prices continue to increase, the strawberry industry has shown great interest in the development and implementation of an automated calyx removal system. In response, this dissertation describes the design, operation, and performance of a full-scale automatic vision-guided intelligent de-calyxing (AVID) prototype machine. The AVID machine utilizes commercially available equipment to produce a relatively low cost automated de-calyxing system that can be retrofitted into existing food processing facilities. This dissertation is broken up into five sections. The first two sections include a machine overview and a 12-week processing plant pilot study. Results of the pilot study indicate the AVID machine is able to de-calyx grade-1-with-cap conical strawberries at roughly 66 percent output weight yield at a throughput of 10,000 pounds per hour. The remaining three sections describe in detail the three main components of the machine: a strawberry loading and orientation conveyor, a machine vision system for calyx identification, and a synchronized multi-waterjet knife calyx removal system. In short, the loading system utilizes rotational energy to orient conical strawberries. The machine vision system determines cut locations through RGB real-time feature extraction. The high-speed multi-waterjet knife system uses direct drive actuation to locate 30,000 psi cutting streams to precise coordinates for calyx removal. Based on the observations and studies performed within this dissertation, the AVID machine is seen to be a viable option for automated high-throughput strawberry calyx removal. A summary of future tasks and further improvements is discussed at the end.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Staff detection and removal is one of the most important issues in optical music recognition (OMR) tasks since common approaches for symbol detection and classification are based on this process. Due to its complexity, staff detection and removal is often inaccurate, leading to a great number of errors in posterior stages. For this reason, a new approach that avoids this stage is proposed in this paper, which is expected to overcome these drawbacks. Our approach is put into practice in a case of study focused on scores written in white mensural notation. Symbol detection is performed by using the vertical projection of the staves. The cross-correlation operator for template matching is used at the classification stage. The goodness of our proposal is shown in an experiment in which our proposal attains an extraction rate of 96 % and a classification rate of 92 %, on average. The results found have reinforced the idea of pursuing a new research line in OMR systems without the need of the removal of staff lines.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

New bone chars for fluoride adsorption from drinking water have been synthetized via metallic doping using aluminum and iron salts. A detailed statistical analysis of the metal doping process using the signal-to-noise ratios from Taguchi's experimental designs and its impact on the fluoride adsorption properties of modified bone chars have been performed. The best conditions, including the proper metallic salt, for metal doping were identified to improve the fluoride uptakes of modified bone chars. Results showed that the fluoride adsorption properties of bone chars can be enhanced up to 600% using aluminum sulfate for the surface modification. This aluminum-based adsorbent showed an adsorption capacity of 31 mg/g, which outperformed the fluoride uptakes reported for several adsorbents. Surface interactions involved in the defluoridation process were established using FTIR, DRX and XPS analysis. Defluoridation using the metal-doped bone chars occurred via an ion exchange process between fluoride ions and the hydroxyl groups on the adsorbent surface, whereas the Al(OH)xFy, FexFy, and CaF2 interactions could play also an important role in the removal process. These metal-doped adsorbents anticipate a promising behavior in water treatment, especially in developing countries where the efficiency – cost tradeoff is crucial for implementing new defluoridation technologies.