Energia metabolizável do óleo de soja em diferentes níveis de inclusão para frangos de corte nas fases de crescimento e final

Foram conduzidos dois ensaios de metabolismo utilizando-se frangos de corte machos, com o objetivo de determinar o valor de energia metabolizável aparente (EMA) do óleo de soja, o coeficiente de metabolização da matéria seca (CMMS) e a retenção de nitrogênio (RN) em rações isocalóricas, em função de duas idades das aves: crescimento (22 30 dias) e final (42 50 dias) e quatro níveis de inclusão do óleo de soja: 0; 3,3; 6,6 e 9,9%.Os experimentos tiveram duração de oito dias, sendo três dias para adaptação das aves às rações experimentais e cinco dias para coleta de excretas. O valor energético do óleo de soja foi determinado por diferença. O delineamento utilizado nos dois ensaios foi o inteiramente casualizado, com quatro tratamentos e quatro repetições de seis aves cada. Os valores de EMA do óleo de soja, de RN e do CMMS das rações obtidos para os níveis de 3,3; 6,6 e 9,9% de óleo de soja no período de crescimento foram, respectivamente, de 9.437 kcal/kg, 68,22 g e 75,47%; 9307 kcal/kg, 74,80 g e 74,69%; e 8.701 kcal/kg, 69,98 g e 74,93% e para o período final, de 9.558 kcal/kg, 54,03 g e 79,33%; 8.659 kcal/kg, 48,18 g e 77,92%; e 8307 kcal/kg, 52,88 g e 76,28%. Os níveis de inclusão do óleo de soja não influenciaram os valores de EMA, de RN e o do CMMS. A RN foi maior para aves no período de crescimento e o CMMS foi maior para as aves no período final. A EMA do óleo de soja não foi influenciada pelas idades.

Valor energético de algumas fontes lipídicas determinado com frangos de corte

Um experimento foi conduzido para se determinar o valor energético do óleo de soja refinado, do óleo de canola refinado, do óleo de girassol refinado, do óleo de frango, do óleo de peixe e da banha suína para frangos de corte. Foram utilizados 168 frangos de corte com 22 dias de idade, distribuídos em um delineamento inteiramente casualizado, com sete tratamentos (seis fontes lipídicas e uma ração-referência) e quatro repetições de seis frangos por unidade experimental. O experimento teve duração de oito dias, sendo a coleta de excretas realizada nos últimos cinco dias. As fontes lipídicas testadas substituíram a dieta basal em 20% na matéria natural. Os valores de energia metabolizável aparente corrigidos para retenção de nitrogênio na matéria natural foram: 9.201 kcal/kg para o óleo de soja; 8.129 kcal/kg para o óleo canola; 9.561 kcal/kg para o óleo de girassol; 8.251 kcal/kg para o óleo de frango; 8.715 kcal/kg para o óleo de peixe e 8.366 kcal/kg para a banha suína.

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry

Determinação experimental e modelagem termodinâmica do ponto de turbidez de sistemas aquosos com tensoativos nonilfenolpolietoxilados

The nonionic surfactants are composed of substances whose molecules in solution, does not ionize. The solubility of these surfactants in water due to the presence of functional groups that have strong affinity for water. When these surfactants are heated is the formation of two liquid phases, evidenced by the phenomenon of turbidity. This study was aimed to determine the experimental temperature and turbidity nonilfenolpoliethoxyled subsequently perform a thermodynamic modeling, considering the models of Flory-Huggins and the empirical solid-liquid equilibrium (SLE). The method used for determining the turbidity point was the visual method (Inoue et al., 2008). The experimental methodology consisted of preparing synthetic solutions of 0,25%, 0,5%, 1%, 2%, 3%, 4%, 5%, 6%, 7%, 8%, 9%, 10%, 12,5%, 15%, 17% and 20% by weight of surfactant. The nonionic surfactants used according to their degree of ethoxylation (9.5, 10, 11, 12 and 13). During the experiments the solutions were homogenized and the bath temperature was gradually increased while the turbidity of the solution temperature was checked visually Inoue et al. (2003). These temperature data of turbidity were used to feed the models evaluated and obtain thermodynamic parameters for systems of surfactants nonilfenolpoliethoxyled. Then the models can be used in phase separation processes, facilitating the extraction of organic solvents, therefore serve as quantitative and qualitative parameters. It was observed that the solidliquid equilibrium model (ESL) was best represented the experimental data.

Remoção do cobre de efluente galvânico aplicando tensoativos derivado de óleos vegetais

Copper is one of the most used metals in platingprocesses of galvanic industries. The presence of copper, a heavy metal, in galvanic effluents is harmful to the environment.The main objective of this researchwas the removal ofcopperfromgalvanic effluents, using for this purpose anionic surfactants. The removal process is based on the interaction between the polar head group of the anionic surfactant and the divalent copper in solution. The surfactants used in this study were derived from soybean oil (OSS), coconut oil (OCS), and sunflower oil (OGS). It was used a copper synthetic solution (280 ppm Cu+2) simulating the rinse water from a copper acid bath of a galvanic industry. It were developed 23and 32 factorial designs to evaluate the parameters that have influence in theremoval process. For each surfactant (OSS, OCS, and OGS), the independent variables evaluated were: surfactant concentration (1.25 to 3.75 g/L), pH (5 to 9) and the presence of an anionic polymer (0 to 0.0125 g/L).From the results obtained in the 23 factorial design and in the calculus for estimatingthe stoichiometric relationship between surfactants and copper in solution, it were developed new experimental tests, varying surfactant concentration in the range of 1.25 to 6.8 g/L (32 factorial design).The results obtained in the experimental designs were subjected to statistical evaluations to obtain Pareto charts and mathematical modelsfor Copper removal efficiency (%). The statistical evaluation of the 23 and 32factorial designs, using saponifiedcoconut oil (OCS), presented the mathematical model that best described the copper removal process.It can be concluded that OCS was the most efficient anionic surfactant, removing 100% of the copper present in the synthetic galvanic solution

Tratamento de água de produção de petróleo visando o aproveitamento na obtenção de barrilha

The petroleum production is associated to the produced water, which has dispersed and dissolved materials that damage not only the environment, but also the petroleum processing units. This study aims at the treatment of produced water focusing mainly on the removal of metals and oil and using this treated water as raw material for the production of sodium carbonate. Initially, it was addressed the removal of the following divalent metals: calcium, magnesium, barium, zinc, copper, iron, and cadmium. For this purpose, surfactants derived from vegetable oils, such as coconut oil, soybean oil, and sunflower oil, were used. The investigation showed that there is a stoichiometric relationship between the metals removed from the produced water and the surfactants used in the process of metals removal. It was also developed a model that correlates the hydrolysis constant of saponified coconut oil with the metal distribution between the resulting stages of the proposed process, flocs and aqueous phases, and relating the results with the pH of the medium. The correlation coefficient obtained was 0.963. Next, the process of producing washing soda (prefiro soda ahs ou sodium carbonate) started. The resulting water from the various treatment approaches from petroleum production water was used. During this stage of the research, it was observed that the surfactant assisted in the produced water treatment, by removing some metals and the dispersed oil entirety. The yield of sodium carbonate production was approximately 80%, and its purity was around 95%. It was also assessed, in the production of sodium carbonate, the influence of the type of reactor, using a continuous reactor and a batch reactor. These tests showed that the process with continuous reactor was not as efficient as the batch process. In general, it can be concluded that the production of sodium carbonate from water of oil production is a feasible process, rendering an effluent that causes a great environmental impact a raw material with large scale industrial use

Migration of Tinuvin P, a UV stabilizer, from PET bottles into fatty-food simulants

Tinuvin P migration from Polyethyleneterephthalate (PET) bottles was investigated using several fatty-food simulants such as olive oil, soybean oil, n-heptane and iso-octane, at exposure conditions of 2-10 days at 40 degrees C (total immersion). The stability of several UV stabilizers (BHT, Cyasorb UV 5411, Tinuvin P, Tinuvin 326 and Tinuvin 327) in n-heptane and iso-octane was also studied. After 10 days at 40 degrees C, losses of 6% and 20% in iso-octane and n-heptane respectively, were verified for Tinuvin P. Other UV stabilizers at the same experimental conditions showed higher losses (up to 30% for Tinuvin 327). These results confirm that, when carrying out specific migration studies, the stability of the substance of interest should be established in the food simulant to avoid underestimating the real migration behaviour. In order to quantify UV stabilizer migration, n-heptane and iso-octane solutions were concentrated and directly analysed by SIM mode GC-MS. For olive and soybean oils, Tinuvin P was isolated using size-exclusion chromatography and quantified by SIM mode GC-MS. Iso-octane proved to be a move suitable fatty-food simulant than n-heptane for the migration study of Tinuvin P from PET. Higher levels of Tinuvin P migrated to olive and soybean oils rather than to n-heptane. These results suggest that the MERCOSUL recommended official methods for specific migration studies should be revised since the migration levels using n-heptane as a fatty-food simulant could be underestimated when compared to edible oils. Copyright (C) 1999 John Wiley & Sons, Ltd.

Praziquantel-loaded PLGA nanoparticles: preparation and characterization

Nanoparticles containing praziquantel made of Poly (D,L-lactide-co-glycolide) were designed by an emulsion-solvent evaporation method. Two organic solvents were separately utilized as disperse phase: methylene chloride and ethyl acetate. The size of the particles prepared with the former solvent was bigger than the particles prepared with the latter. The entrapment efficiency was bigger when methylene chloride was used, 79.82% in comparison with 29.27% by using ethyl acetate. DSC and infrared studies showed that no strong chemical interaction between drug and polymer occurred. Release kinetics of praziquantel, used as a model drug, was governed not only by actual drug loading but also by particles size. The higher the drug content and the smaller the particle size resulted in faster drug release.

Descrição de dieta purificada para indução de quadro de desnutrição protéica em ratos

No presente trabalho é descrita a composição de dieta hipoprotéica (6% de proteína) purificada para indução de quadro de desnutrição em roedores. A referida dieta foi padronizada em laboratório a partir de modificação da AIN-93 (documento do American Institute of Nutrition que estabelece os padrões nutricionais para roedores de laboratório), visando a obtenção de animais desnutridos para estudar as alterações metabólicas decorrentes da desnutrição protéica associada a situações como exercício físico, gestação e diabetes. A dieta em questão contém os seguintes componentes (g/ kg): amido de milho (480), caseína (71,5), dextrina de milho (159), sacarose (121), óleo de soja (70), microcelulose (50), mistura mineral AIN-93-G-MX (35), mistura de vitaminas AIN-93-G-VX, (10), L-cistina (1), cloridrato de colina (2,5). Ratos alimentados cronicamente com a dieta apresentaram sinais comumente presentes na desnutrição protéica humana e de animais de laboratório: redução do ganho de peso, hipoproteinemia, hipoalbuminemia, elevação dos ácidos graxos livres séricos e do glicogênio hepático.

Síntese e caracterização de materiais nanoporosos para pirólise catalítica de óleos pesados

The present work reports the study of nanoporous structures, aiming at their use in research directed to the current demand of the petroleum industry to value heavy oil. Initially, two ways were chosen for the synthesis of porous structures from the molecular sieves of type Si-MCM-41. In the first way, the structure MCM-41 is precursory for heteroatom substitutes of silicon, generating catalyst of the type Al-MCM-41 from two different methods of incorporation of the metal. This variation of the incorporation method of Aluminum in the structure of Si-MCM-41 was carried out through the conventional procedure, where the aluminum source was incorporated to the gel of synthesis, and the procedure post-synthesis, where the Aluminum source was incorporated in catalyst after the synthesis of Si-MCM-41. In the second way, the MCM-41 acts as a support for growth of nanocrystals of zeolite embedded in their mesoporous, resulting in hybrid MCM-41/ZSM-5 catalyst. A comparative analysis was carried through characterizations by XRD, FTIR, measures of acidity through n-butylamine adsorption for TGA, SEM-XRF and N2 adsorption. Also crystalline aluminosilicate with zeolitic structure MFI of type ZSM-5 was synthesized without using organic templates. Methodologies to the preparation of these materials are related by literature using conventionally reactants that supply oxides of necessary silicon and aluminum, as well as a template agent, and in some cases co-template. The search for new routes of preparation for the ZSM-5 aimed at, above all, the optimization of the same as for the time and the temperature of synthesis, and mainly the elimination of the use of organic templates, that are material of high cost and generally very toxic. The current study is based on the use of the H2O and Na+ cations playing the role of structural template and charge compensation in the structure. Characterizations by XRD, FTIR, SEM-XRF and N2 adsorption were also conducted for this material in order to compare the samples of ZSM-5 synthesized in the absence of template and those used industrially and synthesized using structuring

Estudo da eficácia do tensoativo sorbitano tween 80 veiculado em nanoemulsão contendo óleo de soja, como inibidor de corrosão

Nowadays, the use of chemicals that satisfactorily meet the needs of different sectors of the chemical industry is linked to the consumption of biodegradable materials. In this context, this work contemplated biotechnological aspects with the objective of developing a more environmentally-friendly corrosion inhibitor. In order to achieve this goal, nanoemulsion-type systems (NE) were obtained by varying the amount of Tween 80 (9 to 85 ppm) a sortitan surfactant named polyoxyethylene (20) monooleate. This NE-system was analyzed using phase diagrams in which the percentage of the oil phase (commercial soybean oil, codenamed as OS) was kept constant. By changing the amount of Tween 80, several polar NE-OS derived systems (O/W-type nanoemulsion) were obtained and characterized through light scattering, conductivity and pH, and further subjected to electrochemical studies. The interfacial behavior of these NE-OS derived systems (codenamed NE-OS1, S2, S3, S4 and S5) as corrosion inhibitors on carbon steel AISI 1020 in saline media (NaCl 3.5%) were evaluated by measurement of Open Circuit Potential (OCP), Polarization Curves (Tafel extrapolation method) and Electrochemical Impedance Spectroscopy (EIS). The analyzed NE-OS1 and NE-OS2 systems were found to be mixed inhibitors with quantitative efficacy (98.6% - 99.7%) for concentrations of Tween 80 ranging between 9 and 85 ppm. According to the EIS technique, maximum corrosion efficiency was observed for some tested NE-OS samples. Additionaly to the electrochemical studies, Analysis of Variance (ANOVA) and Principal Component Analysis (PCA) were used, characterization of the nanoemulsion tested systems and adsorption studies, respectively, which confirmed the results observed in the experimental analyses using diluted NE-OS samples in lower concentrations of Tween 80 (0.5 1.75 ppm)

Ethyl Carbamate Analysis in German Fruit Spirits and Brazilian Sugarcane Spirits (Cachaca): Improved Sample Cleanup with Automated Parallel Evaporation

The analysis of alcoholic beverages for the important carcinogenic contaminant ethyl carbamate is very time-consuming and expensive. Due to possible matrix interferences, sample cleanup using diatomaceous earth (Extrelut) column is required prior to gas chromatographic and mass spectrometric measurement. A limiting step in this process is the rotary evaporation of the eluate containing the analyte in organic solvents, which is currently conducted manually and requires approximately 20-30 min per sample. This paper introduces the use of a parallel evaporation device for ethyl carbamate analysis, which allows for the simultaneous evaporation of 12 samples to a specified residual volume without manual intervention. A more efficient and, less expensive analysis is therefore possible. The method validation showed no differences between the fully-automated parallel evaporation and the manual operation. The applicability was proven by analyzing authentic spirit samples from Germany, Canada and Brazil. It is interesting to note that Brazilian cachacas had a relatively high incidence for ethyl carbamate contamination (55% of all samples were above 0.15 mg/l), which may be of public health relevance and requires further evaluation.

Fibra bruta e óleo em dietas práticas para alevinos de tilápia do Nilo (Oreochromis niloticus)

Objetivou-se, neste estudo, avaliar os efeitos de diferentes níveis de fibra bruta e de óleo de soja em rações para a tilápia do Nilo. Utilizaram-se 24 aquários circulares de 250 L, dotados de sistema individual de reabastecimento de água e aquecimento. A densidade de estocagem foi de sete peixes/aquário, totalizando 168 peixes, com peso inicial médio de 6,41±0,05 g. Ganho de peso, conversão alimentar aparente, taxa de crescimento específico e taxa de eficiência protéica foram avaliados. Foram analisados a composição química e o rendimento de carcaça, gordura visceral e índice hepatossomático dos peixes. O experimento foi realizado segundo um esquema fatorial 3 x 2 (três níveis de fibra bruta 6,00; 9,00 e 12,00%, com e sem óleo de soja) no delineamento inteiramente ao acaso com quatro repetições. Verificou-se que a fibra interfere de forma significativa na digestibilidade aparente da dieta, com ação positiva para a proteína e negativa para a matéria seca, não interferindo na digestibilidade do extrato etéreo; que a fibra bruta não tem efeito significativo sobre o rendimento de carcaça e no depósito de gordura visceral, mas a inclusão de óleo à ração tem efeito significativo no depósito de gordura visceral; que a fibra resulta em efeito significativo na composição química da carcaça (teor de água e proteína), não tendo efeito sobre sua composição em gordura; e que a inclusão de gordura à ração diminui e eleva de forma significativa, respectivamente, o conteúdo de proteína e extrato etéreo da carcaça. Concluiu-se que, na fase de alevinagem (6,40 a 31,00g), pode-se utilizar na dieta da tilápia do Nilo até 9,00% de fibra bruta, e que a suplementação de níveis excessivos de lipídeos na dieta piora a composição da carcaça e resulta em maior depósito de gordura visceral.

Parâmetros sanguíneos de cavalos alimentados com concentrados lipídicos submetidos a treinos aeróbicos montados

Avaliou-se o fornecimento de concentrados com baixo e alto teor de óleo de soja a cavalos atletas, submetidos a duas intensidades de treinos aeróbicos montados, sobre a resposta metabólica de parâmetros bioquímicos do sangue, de importância ao desempenho esportivo. Foram utilizados quatro cavalos, em delineamento experimental quadrado latino, com tratamentos em esquema fatorial 2x2 (duas inclusões de óleo de soja e duas rotinas de treinos aeróbicos). Os tratamentos foram compostos por teores de 5 e 15% de óleo de soja nos concentrados e duas intensidades de treinos montados por 40 e 60min, classificadas como aeróbicas. As amostras de sangue foram colhidas após o último treino de 40 ou 60min, de cada período experimental. Monitorou-se, após o exercício, os parâmetros bioquímicos, triglicerídeos (TG), colesterol total (CT), glicose (GLI) e lactato (LAC). Houve redução no teor TG (P<0,05) para cavalos consumindo 15% de óleo e treinados aerobicamente por 60 min., o CT elevou-se em função do aumento da inclusão de óleo (P<0,05), incremento LAC (P<0,05) em cavalos treinados por 60min., independente do nível de óleo ingerido (1,48mmol/L), bem como não se verificou efeito (P>0,05) dos tratamentos sobre GLI. Concluiu-se que, para cavalos atletas em atividade aeróbica, o oferecimento de concentrado com alto teor óleo de soja deve ser associado ao treino montado de maior intensidade.

Cholesterol levels and nutritional composition of commercial layers eggs fed diets with different vegetable oils

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)