747 resultados para potato
Resumo:
O presente trabalho foi realizado na Estação Experimental Agrícola da BASF S.A., situada na rodovia SP 310, km 144, no município de Santo Antonio da Posse-(SP), em área de Latossolo Vermelho distrófico com textura média. Quatro experimentos foram desenvolvidos com o objetivo de avaliar a seletividade dos herbicidas dimethenamid, metribuzin e linuron, aplicados em diferentes doses, na condição de pré-emergência, sobre as características de produção e qualidade dos tubérculos de quatro cultivares de batata (Solanum tuberosum L.). Utilizou-se, em todos os experimentos, o delineamento experimental de blocos ao acaso, com cinco repetições e parcelas de 21 m² (3 x 7 m). Os tratamentos utilizados foram: testemunha capinada, dimethenamid nas doses de 0,75, 1,50 e 3,00 kg ha-1, metribuzin a 0,48 e 0,72 kg ha-1 e linuron a 1,50 e 2,00 kg ha-1. Foram realizadas três avaliações visuais de fitotoxicidade aos 24, 31, e 42 dias após a aplicação (DAA). A severidade das injúrias visuais verificadas nas plantas das diferentes cultivares de batata foi dependente do herbicida, da dose aplicada e da cultivar utilizada. O herbicida dimethenamid, na dose de 3,00 kg ha-1, foi o tratamento que proporcionou as maiores porcentagens visuais de área foliar injuriada, no entanto tais sintomas desapareceram completamente aos 42 DAA. Nenhum tratamento com herbicida interferiu negativamente na produção de tubérculos, na massa seca dos tubérculos e no tamanho final dos tubérculos colhidos.
Resumo:
Boron (B) fertilization can result in high yield and better sweet potato storage roots quality. However, there is few works about this subject. The objective was to evaluate the yield of sweet potato crops in response to B sources, rates and application form. The experimental design was complete randomized blocks, in factorial outline ((2x2x2)+1), with three replications, which resulted of the combination of sources of B (boric acid and borax), application form (via soil and via foliar) and doses of B (1 and 2 kg ha(-1)) and a control treatment (without B). There was no interaction between the factors studied for the commercial yield of sweet potato. No significant differences was found between B sources and application form, but they showed higher yield than the control treatment. Additionally, sweet potato yield increade with application of 2 kg ha(-1) of B.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Cyclodextrin glycosyltransferase (EC 2.4.1.19) is an enzyme that produces cyclodextrins from starch via an intramolecular transglycosylation reaction. An alkalophilic Bacillus strain, isolated from cassava peels, was identified as Bacillus licheniformis. CGTase production by this strain was better when potato starch was used as carbon source, followed by cassava starch and amylopectin. Glucose and amylose, on the other hand, acted as synthesis repressors. When the cultivation was supplemented with sodium ions and had the pH adjusted between 6.0 and 9.0, the microorganism maintained the growth and enzyme production capacity. This data is interesting because it contradicts the concept that alkalophilic microorganisms do not grow in this pH range. After ultrafiltration-centrifugation, one protein of 85.2 kDa with CGTase activity was isolated. This protein was identified in plates with starch and phenolphthalein. Determination of the optimum temperature showed higher activities at 25 degrees C and 55 degrees C, indicating the possible presence of more than one CGTase in the culture filtrate. Km and Vmax values were 1.77 mg/mL and 0.0263 U/mg protein, respectively, using potato starch as substrate.
Resumo:
Several researches have been developed in order to verify the porosity effect over the ceramic material properties. The starch consolidation casting (SCC) allows to obtain porous ceramics by using starch as a binder and pore forming element. This work is intended to describe the porous mathematical behavior and the mechanical resistance at different commercial starch concentration. Ceramic samples were made with alumina and potato and corn starches. The slips were prepared with 10 to 50 wt% of starch. The specimens were characterized by apparent density measurements and three-point flexural test associated to Weibull statistics. Results indicated that the porosity showed a first-order exponential equation e(-x/c) increasing in both kinds of starches, so it was confirmed that the alumina ceramic porosity is related to the kind of starch used. The mechanical resistance is represented by a logarithmic expression R = A + B/1+10((Log(x0)-P)C).
Resumo:
Porosity in starch consolidation casting technique is rightly related to original size and morphology of starch granules, leaving a pore structure after burning out. This work reports the results for the addition of different native potato and corn starch proportions in suspension,; with TiO(2) (rutile) powder. Gelling temperature have been defined after observation under light microscopy using a heating stage. Analysis of porous network and isolated pores have been clone from images of samples surfaces obtained by depth from focus reconstruction, revealing a qualitative correlation of pores characteristics and starches additions in suspensions, suggesting that the presence of isolated or interconnected pores can be handled by starches selection to control the amylopectin and amylose contents in slurries. Also, the analysis of porous fraction distribution shows no consistent pattern through specimens' volume according to starches in mixtures.
Resumo:
In this paper, pre-gelling starch was used to consolidate alumina-dense ceramic suspensions. The colloidal processing of the ceramic was prepared with alumina and commercial potato starch, and slips were prepared with 55 vol% of solids and 0.5 wt.% of starch. This small amount of starch was possible because of a previous pre-gelling starch treatment, resulting in more homogeneous suspensions and particles smaller than starch granules. Additionally, Sucrose was also used as a dispersion aid. After sintering, the samples were analysed according to their mechanical properties. These processes produced ceramics with a 93% relative density, 325 MPa flexural strength, and a Weibull module whose value wits m = 10, maintaining the capacity of this process to produce complex geometric shaped ceramics. (C) 2008 Elsevier Ltd. All rights reserved.
Resumo:
Farinha de batata-doce (Ipomoea batatas) foi extrusada em equipamento de rosca simples, mantendo-se fixas as temperaturas na 1ª e 2ª zonas de extrusão (20ºC e 60ºC, respectivamente). O efeito das variáveis umidade da farinha (15, 18 e 21%), temperatura na 3ª zona (100, 120 e 140ºC) e rotação da rosca (180, 210 e 240 rpm) sobre as características dos extrusados foi investigado utilizando-se metodologia de superfície de resposta. O teor de umidade e a temperatura de extrusão influenciaram significativamente a expansão dos extrusados. O índice de expansão apresentou valores crescentes com a temperatura sob baixos teores de umidade. A dureza dos extrusados e também o índice de absorção de água e o índice de solubilidade em água das farinhas extrusadas não mostraram modelo de regressão significativo com as condições de processo. Quanto à cor das farinhas, o componente L* (luminosidade) apresentou valores crescentes e o parâmetro a*, valores decrescentes com a elevação do teor de umidade até 20-21%. O parâmetro b* e a diferença de cor entre farinhas extrusadas e não extrusadas mostraram valores decrescentes com o aumento da umidade.
Resumo:
As principais fontes de amido comercial no mundo são o milho, a batata e a mandioca. Entretanto, nos últimos anos vem crescendo o interesse em amidos naturais que possam ser utilizados pela indústria alimentícia. Assim, este trabalho teve por objetivo caracterizar, quanto à composição físico-química, açafrão, ahipa, araruta, batata-doce, biri, inhame e mandioquinha-salsa, tuberosas amiláceas potencialmente passíveis de introdução como matérias-primas de interesse comercial. Amostras das tuberosas foram analisadas quanto ao teor de umidade, cinzas, proteína, matéria graxa, açúcares redutores e totais, fibras e amido. Os resultados obtidos mostraram que das tuberosas analisadas as que apresentaram maior teor de amido foram a araruta (Maranta arundinacea), o inhame (Dioscorea sp) e o biri (Canna edulis), sendo que o inhame e o biri apresentaram também o maior rendimento potencial em toneladas de amido/hectare.
Resumo:
Uma característica valorizada pelo setor alimentício é a propriedade de expansão dos grânulos de amido. Com este trabalho, teve-se por objetivo avaliar o efeito da concentração de ácido lático durante tratamento de modificação fotoquímica das féculas de batata-doce (Ipomoea batatas), biri (Canna edulis), mandioca (Manihot esculenta) e taioba (Xanthosoma sagittifolium). Pelos resultados obtidos neste experimento, nas condições em que este foi realizado, conclui-se que a concentração de ácido lático interferiu na propriedade de expansão das féculas de batata-doce, mandioca e taioba e não apresentou efeito na fécula de biri, devendo ser ajustado para cada tipo de fécula a ser modificada. Os índices de expansão obtidos nas diferentes féculas foram considerados baixos, quando comparados aos índices obtidos para fécula de mandioca modificada.
Resumo:
In Brazil, postharvest diseases caused by pathogenic microorganisms are a major problem that causes damage to around 80% of the total fruit production. In the lower middle Sao Francisco river valley numerous studies on identification and control of fungal diseases during postharvest of grapes are needed, in order to minimize losses in this step. In this context, bunches of seedless varieties 'Crimson', 'Sonaka'; 'Superior' and 'Thompson' were collected from July to November 2009, in order to identify and quantify the incidence of pathogenic fungi. The grapes were collected on five farms which specialize in the production of table grapes for export, all located in Juazeiro - BA and Petrolina - PE. During this period, 10 samples were taken. In the fruit farm five plants were used for sampling, and removal of two bunches of grapes per plant, totaling 10 bunches per variety. Subsequently, they were sent to the laboratory of Plant Pathology at UNEB/DTCS where they were placed separately in a moist chamber for 48 hours at an average temperature of 23 degrees C. After this period, isolations of berries and stems in Petri plates containing PDA - potato-dextrose-agar were carried out with 10 repetitions, which were placed on benches under laboratory conditions. From the 8th day on, the presence of Aspergillus niger, Alternaria alternata, Cladosporium herbarum, Lasiodiploidia theobromae was observed, which presented the highest incidence, as well as Rhizopus stolonifer, Penicillium expansum.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)