Investigation of the effect of movement and irrigation systems on temperature in the conventional drilling of cortical bone

We have compared the results of the external irrigation technique with those of a double irrigation technique with continuous intermittent movement. Maximum thermal measurements were made in the cortical part of 10 samples of bovine ribs during osteotomy to simulate the preparation of a surgical bed for the installation of dental implants at a depth of 10 mm Twenty specimens were drilled for each group: external irrigation and continuous movement (control group 1, CG1); external irrigation and intermittent movement (control group 2, CG2); double irrigation and continuous movement (test group 1, TG1); and double irrigation and intermittent movement (test group 2, TG2). The double irrigation technique gave significantly better results regardless of the drilling movement used. Thermal increases between samples was 19.2% in group CG1, 10.4% in CG2, 5.4% in TG1, and 3.4% in TG2. The double irrigation technique produced a significantly smaller increase in temperature in the cortical bone during both types of drilling (p = 0.001), which illustrated its greater efficiency compared with that of the external irrigation technique. (C) 2013 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Perspectives on the use of lakes and ponds as model systems for macroecological research

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Limit Cycles for a Class of Continuous and Discontinuous Cubic Polynomial Differential Systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Clinical Comparison of the Effectiveness of Single-file Reciprocating Systems and Rotary Systems for Removal of Endotoxins and Cultivable Bacteria from Primarily Infected Root Canals

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The root systems of permian arborescent sphenopsids: evidence from the northern and southern hemispheres

Anatomically preserved calamitalean trunks are described from the Permian fossil forests of Chemnitz, Germany, and Tocantins, central-north Brazil. Several trunk bases were found in situ, still rooting in their former substrate or in parautochthonous sediments and revealing multiple organic connections between stems and roots. The new evidence of several free-stemmed Permian calamitaleans from different fossil lagerstatten and different taphonomic modes from the Northern and Southern hemispheres has implications for understanding calamite growth and challenges the universal validity of the reconstruction of rhizome-bearing woody trees. Whereas the stems belong to different species of the widely distributed genus Arthropitys GOEPPERT 1864, among them the generitype A. bistriata (COTTA) emend. RoSSLER, FENG & NOLL 2012 the attached roots represent the largest calamite roots ever found and incorporate a broad spectrum of preservational forms and ontogenetic stages. The latter are represented by the root genera Astromyelon WILLIAMSON 1878, Myriophylloides HICK & CASH 1881 and Asthenomyelon LEISTIKOW 1962 that were evidenced for the first time from Chemnitz, the type locality of Arthropitys and Calamitea (COTTA) emend. ROSSLER & NOLL 2007. Branched, stem-borne, adventitious root systems exhibit similar architectures, arise from different nodes of the lowermost trunks and anchor the trees in' different substrates. Developmental features were analysed in first- to third-order roots, which possess clearly-defined concentric tissue zones: epidermis/periderm, cortex, endodermis and central vascular tissue with or without pith. First-order roots, in particular, show considerable secondary growth. Numerous zones of concentric density variation in the secondary xylem indicate some kind of seasonality in the early Permian environments.

Tuning the activity of alternative Ru-based initiators for ring-opening metathesis polymerization of norbornene and norbornadiene by the substituent in 4-CH2R-piperidine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eimeria species in young and adult sheep raised under intensive and/or semi-intensive systems of a herd from Umuarama city, Parana State, Brazil

The present study aimed to identify Eimeria species in young and adult sheep raised under intensive and / or semi-intensive systems of a herd from Umuarama city, Parana State, Brazil using the traditional diagnostic methods and to correlate the infection level/types of infection in the different age/system in this herd. Fecal samples were collected from the rectum of 210 sheep and were subjected to laboratory analysis to differentiate the species. Furthermore, animals were observed to determine the occurrences of the clinical or subclinical forms of eimeriosis. Out of the 210 collected fecal samples, 147 (70%) were positive for Eimeria oocysts, and 101 (47.86%) belonged to young animals that were raised under intensive and / or semi-intensive farming systems. Oocysts from 9 species of Eimeria parasites were identified in the sheep at the following prevalence rates: E. crandallis, 50.0%; E. parva, 21.6%; E. faurei, 8.1%; E. ahsata, 8.1%; E. intricata, 5.4%; E. granulosa, 2.7%; E. ovinoidalis, 2.0%; E. ovina, 1.3%; and E. bakuensis, 0.6%. There were no differences regarding the more frequent Eimeria species among the different ages of animals or between the different farming management systems. Based on these data, E. crandallis was the most prevalent, followed by E. parva and E. faurei species, regardless of the age. Higher parasitism was diagnosed in the young animals that were raised in a confinement regime, and the disease found in the herd was classified as subclinical. Further studies should be conducted in this herd, to verify if the eimeriosis subclinical can cause damage especially in young animals with a high level of infection.

Design and Characterization of Silicone and Surfactant Based Systems for Topical Drug Delivery

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cutting Ability of Nickel-titanium rotary systems protaper, mtwo and k3

Nickel-titanium rotatory systems should remove dentin during the root canal preparation to promote the enlargement and tapered shape with continuously narrowing towards the apex. Objective: The aim of this study was to analyze the cutting ability of three NiTi rotatory systems (n = 12): ProTaper (group 1), Mtwo (group 2), and K3 (group 3). Material and methods: Thirty six maxillary molar teeth were weighted on an analytical balance before and after the rotatory preparation of the mesio-buccal root canal. Data was statistically analyzed by ANOVA and Tukey s test with a significance level of 5%. Results: The results revealed the following mass differences (g) before and after the root canal preparation: ProTaper (group 1 – 0.0159 ± 0.004), Mtwo (group 2 – 0.0125 ± 0.002), and K3 (group 3 – 0.007 ± 0.003). Conclusion: ProTaper showed the highest cutting ability among the three tested nickel-titanium rotatory systems followed by Mtwo and K3.

Influence of the rotary and/or oscillatory reciprocating systems in the morphological changes of narrow and curved molar root canals anatomy

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Weakly bound states of two- and three-boson systems in the crossover from two to three dimensions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Theoretical study of molecular and electronic structures of 5(1) knot systems: two-layered ONIOM calculations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling of hydraulic and energy efficiency indicators for water supply systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of chronic fluoride intake on the antioxidant systems of the liver and kidney in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis of the influence of baffles and shields on the cooling of a digital transmission equipment

In this work design criteria for cooling of electronic systems used in a digital transmission equipment are considered. An experimental study using a simulated electronic equipment in which vertically oriented circuit boards are aligned to form vertical channels is carried out. Resistors are used to simulate actual components. The temperature of several components in the printed circuit boards are measured and the influence of the baffles and shields on the cooling effect are discussed. It was observed that the use of the baffles reduce the temperature levels and, the use of shields, although protecting the components from magnetic effects, cause an increase in the temperature levels.