964 resultados para Short circuit in stator
Resumo:
Pyörivien sähkökoneiden suunnittelussa terminen suunnittelu on yhtä tärkeää kuin sähköinen ja mekaaninen suunnittelukin. Tässä diplomityössä tarkoituksena on kehittää ilmajäähdytteisten kestomagneettigeneraattorien laskentaan soveltuva lämmönsiirtymismalli, jolla staattorin lämpötilajakauma voitaisiin selvittää. Kehitetty lämmönsiirtymismalli perustuu kolmiulotteiseen äärellisen erotuksen (finite difference) menetelmään. Malli ottaa huomioon lämmönjohtumisen staattorin aktiiviosissa ja konvektion jäähdytysilmavirtaan. Mallissa on myös yksinkertainen painehäviölaskenta jäähdytysjärjestelmän komponenttien mitoittamista varten. Laskentamallilla lasketaan esimerkkitapauksena 4,3 MW:n kestomagneettigeneraattorin jäähdytystä eri toimintapisteissä. Tuloksia verrataan CFD-mallinnuksen antamiin tuloksiin sekä kokeellisten mittausten antamiin tuloksiin.
Resumo:
Electrical motors on a ship attackable to different factors which decrease these lifetimes. One of the main external factors on a ship which usually is a reason of the motor failure is a moisture condensation which decreases the motor winding insulation and increase a probability of the short circuit. Therefore, the protection against moisture is necessary for ship electrical motors. The motor should be protected against moisture all time when it does not operate. The necessity of such protection requires a lot of energy consumption. This master’s thesis is focused on the creation of the electrical motor thermal model and on the different methods of the motor protection against moisture analysis with energy consumption point of view.
Resumo:
Tämän työn tavoitteena oli selvittää ja toteuttaa esikäsittelypiirin prototyyppi akustisen emission anturin signaalille. Toteutettu esikäsittelypiiri toimii yksipuoleisella käyttöjännitteellä. Työssä käydään läpi esikäsittelypiirin suunnitteluun liittyvät vaiheet laskelmien ja simulaatioiden muodossa. Lisäksi työssä esitetään mittaustulokset esikäsittelypiirin toiminnasta.
Resumo:
This work describes the methodology, basic procedures and instrumental employed by the Solar Energy Laboratory at Universidade Federal do Rio Grande do Sul for the determination of current-voltage characteristic curves of photovoltaic modules. According to this methodology, I-V characteristic curves were acquired for several modules under diverse conditions. The main electrical parameters were determined and the temperature and irradiance influence on photovoltaic modules performance was quantified. It was observed that most of the tested modules presented output power values considerably lower than those specified by the manufacturers. The described hardware allows the testing of modules with open-circuit voltage up to 50 V and short-circuit current up to 8 A.
Resumo:
Abstract This doctoral thesis concerns the active galactic nucleus (AGN) most often referred to with the catalogue number OJ287. The publications in the thesis present new discoveries of the system in the context of a supermassive binary black hole model. In addition, the introduction discusses general characteristics of the OJ287 system and the physical fundamentals behind these characteristics. The place of OJ287 in the hierarchy of known types of AGN is also discussed. The introduction presents a large selection of fundamental physics required to have a basic understanding of active galactic nuclei, binary black holes, relativistic jets and accretion disks. Particularly the general relativistic nature of the orbits of close binaries of supermassive black holes is explored with some detail. Analytic estimates of some of the general relativistic effects in such a binary are presented, as well as numerical methods to calculate the effects more precisely. It is also shown how these results can be applied to the OJ287 system. The binary orbit model forms the basis for models of the recurring optical outbursts in the OJ287 system. In the introduction, two physical outburst models are presented in some detail and compared. The radiation hydrodynamics of the outbursts are discussed and optical light curve predictions are derived. The precursor outbursts studied in Paper III are also presented, and tied into the model of OJ287. To complete the discussion of the observable features of OJ287, the nature of the relativistic jets in the system, and in active galactic nuclei in general, is discussed. Basic physics of relativistic jets are presented, with additional detail added in the form of helical jet models. The results of Papers II, IV and V concerning the jet of OJ287 are presented, and their relation to other facets of the binary black hole model is discussed. As a whole, the introduction serves as a guide, though terse, for the physics and numerical methods required to successfully understand and simulate a close binary of supermassive black holes. For this purpose, the introduction necessarily combines a large number of both fundamental and specific results from broad disciplines like general relativity and radiation hydrodynamics. With the material included in the introduction, the publications of the thesis, which present new results with a much narrower focus, can be readily understood. Of the publications, Paper I presents newly discovered optical data points for OJ287, detected on archival astronomical plates from the Harvard College Observatory. These data points show the 1900 outburst of OJ287 for the first time. In addition, new data points covering the 1913 outburst allowed the determination of the start of the outburst with more precision than was possible before. These outbursts were then successfully numerically modelled with an N-body simulation of the OJ287 binary and accretion disc. In Paper II, mechanisms for the spin-up of the secondary black hole in OJ287 via interaction with the primary accretion disc and the magnetic fields in the system are discussed. Timescales for spin-up and alignment via both processes are estimated. It is found that the secondary black hole likely has a high spin. Paper III reports a new outburst of OJ287 in March 2013. The outburst was found to be rather similar to the ones reported in 1993 and 2004. All these outbursts happened just before the main outburst season, and are called precursor outbursts. In this paper, a mechanism was proposed for the precursor outbursts, where the secondary black hole collides with a gas cloud in the primary accretion disc corona. From this, estimates of brightness and timescales for the precursor were derived, as well as a prediction of the timing of the next precursor outburst. In Paper IV, observations from the 2004–2006 OJ287 observing program are used to investigate the existence of short periodicities in OJ287. The existence of a _50 day quasiperiodic component is confirmed. In addition, statistically significant 250 day and 3.5 day periods are found. Primary black hole accretion of a spiral density wave in the accretion disc is proposed as the source of the 50 day period, with numerical simulations supporting these results. Lorentz contracted jet re-emission is then proposed as the reason for the 3.5 day timescale. Paper V fits optical observations and mm and cm radio observations of OJ287 with a helical jet model. The jet is found to have a spine–sheath structure, with the sheath having a much lower Lorentz gamma factor than the spine. The sheath opening angle and Lorentz factor, as well as the helical wavelength of the jet are reported for the first time. Tiivistelmä Tässä väitöskirjatutkimuksessa on keskitytty tutkimaan aktiivista galaksiydintä OJ287. Väitöskirjan osana olevat tieteelliset julkaisut esittelevät OJ287-systeemistä saatuja uusia tuloksia kaksoismusta-aukkomallin kontekstissa. Väitöskirjan johdannossa käsitellään OJ287:n yleisiä ominaisuuksia ja niitä fysikaalisia perusilmiöitä, jotka näiden ominaisuuksien taustalla vaikuttavat. Johdanto selvittää myös OJ287-järjestelmän sijoittumisen aktiivisten galaksiytimien hierarkiassa. Johdannossa käydään läpi joitakin perusfysiikan tuloksia, jotka ovat tarpeen aktiivisten galaksiydinten, mustien aukkojen binäärien, relativististen suihkujen ja kertymäkiekkojen ymmärtämiseksi. Kahden toisiaan kiertävän mustan aukon keskinäisen radan suhteellisuusteoreettiset perusteet käydään läpi yksityiskohtaisemmin. Johdannossa esitetään joitakin analyyttisiä tuloksia tällaisessa binäärissä havaittavista suhteellisuusteoreettisista ilmiöistä. Myös numeerisia menetelmiä näiden ilmiöiden tarkempaan laskemiseen esitellään. Tuloksia sovelletaan OJ287-systeemiin, ja verrataan havaintoihin. OJ287:n mustien aukkojen ratamalli muodostaa pohjan systeemin toistuvien optisten purkausten malleille. Johdannossa esitellään yksityiskohtaisemmin kaksi fysikaalista purkausmallia, ja vertaillaan niitä. Purkausten säteilyhydrodynamiikka käydään läpi, ja myös ennusteet purkausten valokäyrille johdetaan. Johdannossa esitellään myös Julkaisussa III johdettu prekursoripurkausten malli, ja osoitetaan sen sopivan yhteen OJ287:n binäärimallin kanssa. Johdanto esittelee myös relativististen suihkujen fysiikkaa sekä OJ287- systeemiin liittyen että aktiivisten galaksiydinten kontekstissa yleisesti. Relativististen suihkujen perusfysiikka esitellään, kuten myös malleja kierteisistä suihkuista. Julkaisujen II, IV ja V OJ287-systeemin suihkuja koskevat tulokset esitellään binäärimallin kontekstissa. Kokonaisuutena johdanto palvelee suppeana oppaana, joka esittelee tarvittavan fysiikan ja tarpeelliset numeeriset menetelmät mustien aukkojen binäärijärjestelmän ymmärtämiseen ja simulointiin. Tätä tarkoitusta varten johdanto yhdistää sekä perustuloksia että joitakin syvällisempiä tuloksia laajoilta fysiikan osa-alueilta kuten suhteellisuusteoriasta ja säteilyhydrodynamiikasta. Johdannon sisältämän materiaalin avulla väitöskirjan julkaisut, ja niiden esittämät tulokset, ovat hyvin ymmärrettävissä. Väitöskirjan julkaisuista ensimmäinen esittelee uusia OJ287-systeemistä saatuja havaintopisteitä, jotka on paikallistettu Harvardin yliopiston observatorion arkiston valokuvauslevyiltä. OJ287:n vuonna 1900 tapahtunut purkaus nähdään ensimmäistä kertaa näissä havaintopisteissä. Uudet havaintopisteet mahdollistivat myös vuoden 1913 purkauksen alun ajoittamisen tarkemmin kuin aiemmin oli mahdollista. Havaitut purkaukset mallinnettiin onnistuneesti simuloimalla OJ287-järjestelmän mustien aukkojen paria ja kertymäkiekkoa. Julkaisussa II käsitellään mekanismeja OJ287:n sekundäärisen mustan aukon spinin kasvamiseen vuorovaikutuksessa primäärin kertymäkiekon ja systeemin magneettikenttien kanssa. Julkaisussa arvioidaan maksimispinin saavuttamisen ja spinin suunnan vakiintumisen aikaskaalat kummallakin mekanismilla. Tutkimuksessa havaitaan sekundäärin spinin olevan todennäköisesti suuri. Julkaisu III esittelee OJ287-systeemissä maaliskuussa 2013 tapahtuneen purkauksen. Purkauksen havaittiin muistuttavan vuosina 1993 ja 2004 tapahtuneita purkauksia, joita kutsutaan yhteisnimityksellä prekursoripurkaus (precursor outburst). Julkaisussa esitellään purkauksen synnylle mekanismi, jossa OJ287-systeemin sekundäärinen musta aukko osuu primäärisen mustan aukon kertymäkiekon koronassa olevaan kaasupilveen. Mekanismin avulla johdetaan arviot prekursoripurkausten kirkkaudelle ja aikaskaalalle. Julkaisussa johdetaan myös ennuste seuraavan prekursoripurkauksen ajankohdalle. Julkaisussa IV käytetään vuosina 2004–2006 kerättyjä havaintoja OJ287- systeemistä lyhyiden jaksollisuuksien etsintään. Julkaisussa varmennetaan systeemissä esiintyvä n. 50 päivän kvasiperiodisuus. Lisäksi tilastollisesti merkittävät 250 päivän ja 3,5 päivän jaksollisuudet havaitaan. Julkaisussa esitetään malli, jossa primäärisen mustan aukon kertymäkiekossa oleva spiraalitiheysaalto aiheuttaa 50 päivän jaksollisuuden. Mallista tehty numeerinen simulaatio tukee tulosta. Systeemin relativistisen suihkun emittoima aikadilatoitunut säteily esitetään aiheuttajaksi 3,5 päivän jaksollisuusaikaskaalalle. Julkaisussa V sovitetaan kierresuihkumalli OJ287-systeemistä tehtyihin optisiin havaintoihin ja millimetri- sekä senttimetriaallonpituuden radiohavaintoihin. Suihkun rakenteen havaitaan olevan kaksijakoinen ja koostuvan ytimestä ja kuoresta. Suihkun kuorella on merkittävästi pienempi Lorentzin gamma-tekijä kuin suihkun ytimellä. Kuoren avautumiskulma ja Lorentztekijä sekä suihkun kierteen aallonpituus raportoidaan julkaisussa ensimmäistä kertaa.
Resumo:
Tämä kandidaatintutkielma on kirjallisuuskatsaus, joka käsittelee RFID-teknologian hyöndyntämistä kulunvalvonnassa. Työssä perehdytään pintapuolisesti itse teknologiaan, ja luodaan katsaus kulunvalvontaan. Työn pääaihe on kuitenkin kulunvalvonnan ja RFID:n yhdistyminen: miten RFID:tä hyödynnetään kulunvalvonnan toteutuksissa ympäri maailmaa. Työssä tarkastellaan RFID:n vahvuuksia, sekä heikkouksia kulunvalvonnan suhteen. Tämän lisäksi pyritään luomaan kuva nykyisistä ja tulevista implementaatioista. Viimeinen tärkeä työn osa-alue on turvallisuus. RFID:tä käytetään korkeankin turvatason kulunvalvontaratkaisuissa ja tällöin turvallisuuden maksimoiminen on ensiarvoisen tärkeää.
Resumo:
Työn tarkoitus on arvioida ja selvittää, milloin generaattorin uusinta on optimaalista tehdä vesivoimalaitoksella teknisen kunnon suhteen. Melon generaattori otettiin käyttöön vuonna 1971 ja se on peruskunnostettiin 1998. Vuonna 2009 tehdyn kuntokartoituksen mukaan koneelle annettiin laskelmien 20 vuotta elinikään. Alkuperäisessä generaattorissa on ollut ongelmia alusta asti. Alkuperäiset ongelmat pohjautuvat väärään uralukuun, joka aiheutti värinöitä koneeseen. Värinät saatiin korjattua staattorin käämitystä muuttamalla 1973 ja muutos rajoitti generaattorin tehon 33 MW:iin. Myöhemmin konetta on ajettu yli 33 MW:n teholla, joka aiheutti staattorin levypaketin aaltoilun. Aaltoilu olisi voinut aiheuttaa vakan vaurion generaattoriin. Vuonna 2014 tehdyn revision yhteydessä edellä mainitut ongelmat poistuivat. Ottaen huomioon generaattori 2 ongelmat (käyttöönotettu 1971), niin voidaan todeta, että revisio tehtiin täysin optimaaliseen aikaan.
Resumo:
Inclusion or Exclusion? Trade Union Strategies and Labor Migration This research identified and analyzed immigration-related strategies of the Finnish Construction Trade Union (FCTU) and the Service Union United (SUU); e.g. how the unions react to labor immigration, whether unions seek to include migrants in the unions, and what is migrants’ position in the unions. The two unions were chosen as the focus of the research because the workforce in the sectors they represent is migrant-dense. The study also analyzed the experiences that migrants who work in these sectors have with trade unions. The Estonian labor market situation –including the role of Estonian trade unions– was also examined as it has a considerable impact on the operating environment of the FCTU. The results of the study indicate that immigration is a contradictory issue for both unions. On the one hand, they strive to include migrants as trade union members and to defend migrants’ labor rights. On the other hand, they, together with their umbrella organization the Central Organisation of Finnish Trade Unions (SAK), seek to prevent labor immigration from outside the EU and EEA countries. They actively defend current labor immigration restrictions by drawing atten- tion to high unemployment figures and to the breaches of working conditions migrants encounter. In contrast, the employer organizations promote a more liberal state policy on labor immigration because they see it as a boost for business. Both the unions and the employer organizations ground their arguments on national interest. However, the position of the trade union movement is not uniform: unions belonging to the Confederation of Unions for Professionals and Managerial Staff in Finland (Akava) embrace more liberal labor immigration stances than the SAK. A key trade union strategy is to try to guarantee that migrants’ working condi- tions do not differ from those of the natives. The FCTU and the SUU inform migrants about Finnish collective agreements and trade union membership in the most common migrant languages. This is important for the unions because it is not in their interest that migrants’ working conditions are undercut. The interviewed migrants said that natives had more negotiating power with employers, which is often negatively portrayed in migrants’ working conditions. Migrants perceive that trade unions have an important role in protecting their working conditions. However, they stressed that migrants’ knowledge of unions is often very limited. The number of migrants in both two unions studied here is increasing. Espe- cially in the SUU, a considerable proportion of the new members are migrants. The FCTU is in a more challenging situation than the SUU because migrant construc- tion workers often work only for short periods in Finland and are consequently not interested in becoming union members. The unions’ strategies partly differ: the FCTU was the first Finnish trade union to establish a trade union branch/lo- cal for migrant members. The goal is to facilitate migrants’ inclusion in the union and to highlight the specific problems they face. The SUU, for its part, insists that such a special strategy would exclude migrants within the union organization. Despite the unions’ strategies, migrants are still underrepresented as union members and officials, which some of the interviewed migrants saw as a problem. Immigrants’ perception of trade unions was pragmatic: they had joined unions when membership yielded concrete benefits. In spite of the unions’ strategies, migrants –and temporary migrants– encoun- ter specific problems in terms of working conditions. Both unions demand more state intervention to protect migrants’ labor rights because overseeing working conditions consumes union resources. However, without the unions’ intervention, these problems would be more common than is currently the case. For instance, some of the interviewed migrants had received trade union assistance in claim- ing unpaid wages. The study demonstrated with the help of building on Walter Korpi’s power resources theory, that immigration is a power resource issue for the unions: suc- cessful immigration-related strategies strengthen unions –and vice versa. The research also showed how the unions’ operating environments constrain and enable their immigration-related strategies. This study has illuminated a previously ignored dimension: the immigrant- inclusive strategies of the Finnish trade unions. The research material consists of 78 qualitative interviews, observation in trade union events, and trade unions’ and employer organizations’ public state- ments.
Resumo:
Leveraging cloud services, companies and organizations can significantly improve their efficiency, as well as building novel business opportunities. Cloud computing offers various advantages to companies while having some risks for them too. Advantages offered by service providers are mostly about efficiency and reliability while risks of cloud computing are mostly about security problems. Problems with security of the cloud still demand significant attention in order to tackle the potential problems. Security problems in the cloud as security problems in any area of computing, can not be fully tackled. However creating novel and new solutions can be used by service providers to mitigate the potential threats to a large extent. Looking at the security problem from a very high perspective, there are two focus directions. Security problems that threaten service user’s security and privacy are at one side. On the other hand, security problems that threaten service provider’s security and privacy are on the other side. Both kinds of threats should mostly be detected and mitigated by service providers. Looking a bit closer to the problem, mitigating security problems that target providers can protect both service provider and the user. However, the focus of research community mostly is to provide solutions to protect cloud users. A significant research effort has been put in protecting cloud tenants against external attacks. However, attacks that are originated from elastic, on-demand and legitimate cloud resources should still be considered seriously. The cloud-based botnet or botcloud is one of the prevalent cases of cloud resource misuses. Unfortunately, some of the cloud’s essential characteristics enable criminals to form reliable and low cost botclouds in a short time. In this paper, we present a system that helps to detect distributed infected Virtual Machines (VMs) acting as elements of botclouds. Based on a set of botnet related system level symptoms, our system groups VMs. Grouping VMs helps to separate infected VMs from others and narrows down the target group under inspection. Our system takes advantages of Virtual Machine Introspection (VMI) and data mining techniques.
Resumo:
Kandidaatintyössä tutustuttiin raakaveden sisältämiin epäpuhtauksiin ja niiden aiheuttamiin ongelmiin höyryvoimalaitoksen vesi-höyrypiirissä. Vedenkäsittelyn teoriassa perehdyttiin esikäsittely-, pehmennys-, ioninvaihto- ja käänteisosmoosimenetelmiin, joista suurinta huomiota sai ioninvaihtomenetelmä. Kandidaatintyötä tehdessä oli tekijällä mahdollisuus perehtyä myös käytännön vedenkäsittelylaitoksen toimintaperiaatteeseen. Perehdytty vedenkäsittelylaitos pitää sisällään esikäsittelylaitoksen ja ioninvaihdolla toteutetun suolanpoiston.
Resumo:
The finance-investment-savings-funding circuit in open economies. On monetary economies the Finance-Investment-Savings-Funding circuit (F-I-S-F) prevails. Investment precedes savings. This circuit was worked out for a closed economy. This study seeks to demonstrate that the circuit F-I-S-F also prevails for open economies. A second point studied in this paper relates the relationship between budget deficits and savings restriction for investment. Conclusions highlight that the circuit F-I-S-F prevails for open economies and that budget deficits do not cause savings restriction for investment. In some situations budget déficits transfer the effects of investment for national savings formation from domestic economy to the rest of the world.
Resumo:
This article shows that, in spite of its great steps towards reality, new-Keynesian macroeconomics seems to be a non-systematic construction with problems originated from "ad hoc" hypothesis required to explain the non neutrality of money and the existence of disequilibria in the short run. In particular, it seems that prices and wages rigidities stand in sandy bases and that the derivation of the IS and LM curves from neoclassical fundamentals is problematic. Even disregarding the apparent difficulties of the neoclassical theory of value and distribution, the new-Keynesian connections between interest rate, money, and output do not seem fully consistent.
Resumo:
This thesis is the Logistics Development Forum's assignment and the work dealing with the development of the Port of Helsinki as part of Helsinki hub. The Forum aims to develop logistics efficiency through public-private co-operation and development of the port is clearly dependent on both factors. Freight volumes in the Port of Helsinki are the biggest single factor in hub and, therefore, the role of the port of the entire hub development is strong. The aim is to look at how the port will develop as a result of changes in the foreign trade of Finland and the Northern European logistics trends in 25 years time period. Work includes the current state analysis and scenario work. The analyses are intended to find out, which trends are the most important in the port volume development. The change and effect of trends is examined through scenarios based on current state. Based on the work, the structure of Finnish export industry and international demand are in the key role in the port volume development. There is significant difference between demands of Finnish exporting products in different export markets and the development between the markets has different impacts on the port volumes by mass and cargo type. On the other hand, the Finnish economy is stuck in a prolonged recession and competition between ports has become a significant factor in the individual port's volume development. Ecological valuesand regulations have changed the competitive landscape and maritime transport emissions reductions has become an important competitive factor for short routes in the Baltic Sea, such as in the link between Helsinki and Tallinn.
Resumo:
Metal-ion-mediated base-pairing of nucleic acids has attracted considerable attention during the past decade, since it offers means to expand the genetic code by artificial base-pairs, to create predesigned molecular architecture by metal-ion-mediated inter- or intra-strand cross-links, or to convert double stranded DNA to a nano-scale wire. Such applications largely depend on the presence of a modified nucleobase in both strands engaged in the duplex formation. Hybridization of metal-ion-binding oligonucleotide analogs with natural nucleic acid sequences has received much less attention in spite of obvious applications. While the natural oligonucleotides hybridize with high selectivity, their affinity for complementary sequences is inadequate for a number of applications. In the case of DNA, for example, more than 10 consecutive Watson-Crick base pairs are required for a stable duplex at room temperature, making targeting of sequences shorter than this challenging. For example, many types of cancer exhibit distinctive profiles of oncogenic miRNA, the diagnostics of which is, however, difficult owing to the presence of only short single stranded loop structures. Metallo-oligonucleotides, with their superior affinity towards their natural complements, would offer a way to overcome the low stability of short duplexes. In this study a number of metal-ion-binding surrogate nucleosides were prepared and their interaction with nucleoside 5´-monophosphates (NMPs) has been investigated by 1H NMR spectroscopy. To find metal ion complexes that could discriminate between natural nucleobases upon double helix formation, glycol nucleic acid (GNA) sequences carrying a PdII ion with vacant coordination sites at a predetermined position were synthesized and their affinity to complementary as well as mismatched counterparts quantified by UV-melting measurements.
Resumo:
Suomen työturvallisuuslaki vaatii työnantajia selvittämään työpaikan turvallisuuden ja poistamaan tai pienentämään siellä olevia vaaran riskejä. Tämä laki rinnastaa opiskelijan työntekijäksi ja yliopiston työnantajaksi. Turvallisuuden kartoitukseen on olemassa erilaisia riskianalyysimenetelmiä. Kaikissa menetelmissä analysoitavan kohteen vaaratekijät käydään läpi ja niiden aiheuttamien seurausten vakavuutta ja vaaran todennäköisyyttä arvioidaan. Näiden perusteella voidaan valita tarvittavat toimenpiteet. Yritys voi valita tarkoitukseensa sopivimman analyysimenetelmän tai yhdistellä eri menetelmiä. Tässä kandidaatin työssä Lappeenrannan teknillisen yliopiston jauhatuslaboratoriolle tehtiin riskikartoitus BS 8800-standardin mukaisesti. Riskikartoituksessa tuli ilmi vakaviakin puutteita jauhatuslaboratorion turvallisuudessa. Turvallisuuden parantamiseksi ilmi tulleille puutteille annettiin toimenpide-ehdotuksia. Toteutettujen toimenpiteiden jälkeen on laboratorion turvallisuutta seurattava ja aika ajoin riskianalyysi on tehtävä uudelleen, jotta laboratorion puutteet löydetään ja niihin voidaan puuttua. Näin laboratorio pysyy turvallisena esimerkiksi laitemuutosten jälkeen.