Challenges in developing a new regional road safety strategy for ASEAN

In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. Improving road safety outcomes in ASEAN is not only important for the welfare and economic benefit of these countries, but given that a significant proportion of the world's population lives in ASEAN, it will strongly influence whether the aims of the United Nations Decade of Action for Road Safety and the Sustainable Development Goals are reached. Following the ASEAN Senior Transport Officials Meeting in May 2011, the Secretariat requested the Asian Development Bank (ADB) to provide assistance to improve road safety in ASEAN. In response, ADB, funded by the Japan Fund for Poverty Reduction, has funded a package of action to improve road safety in ASEAN, including the development of a new regional road safety strategy. The diversity of the member nations of ASEAN poses significant challenges for the development of the strategy. For example, the road fatality rates per 100,000 population in Malaysia and Thailand are about 5 times greater than in Singapore. In addition, the importance of particular road safety issues varies across the ASEAN countries and for countries which are undergoing rapid motorization, the order of importance may change over the life of the strategy. The development of the ASEAN Regional Road Safety Strategy has adopted the five pillars of road safety of the UN Decade of Action but focused on those aspects which are most relevant at the regional level and where a regional approach will support and facilitate actions taken by individual countries. A draft ASEAN Regional Road Safety Strategy document has been prepared and consultation will further refine its directions and contents. The paper will describe the processes undertaken to identify issues and solutions, the measurement of road safety maturity and behavioural risk factors, and the overall structure and themes of the strategy.

Drainage and Irrigation Project Eastern Crimea

Digital image

A review of project evaluation methodologies to address net impacts and risks of toll road projects to the community

Project evaluation is a process of measuring costs, benefits, risks and uncertainties for the purpose of decision-making by estimating and assessing impacts of the project to the community. The effects of impacts of toll roads are similar but different from the general non-tolled roads. Project evaluation methodologies are extensively studied and applied to various transport infrastructure projects. However, there is no definitive methodology to evaluate toll roads. This review discusses the impacts of toll roads then reviews the limitations of existing project evaluation methodologies when evaluating toll road impacts. The review identified gaps of knowledge of toll evaluations. First, the treatment of toll in project evaluation, particularly in Cost-Benefit Analysis requires further study to explore the appropriate methodology. Secondly, the project evaluation methodology needs to place strong emphasis on empirically based risk and uncertainty assessment. Addressing the limitations of the existing project evaluation methodologies leads to improvements of the methodology in practical level as well as fills the gap of knowledge of project evaluation for toll roads with respect to net impacts to the community.

A review of project evaluation methodologies for toll road projects

Project evaluation is a process of measuring costs, benefits, risks and uncertainties for the purpose of decision-making by estimating and assessing impacts of the project to the community. The effects of impacts of toll roads are similar but different from the general non-tolled roads. Project evaluation methodologies are extensively studied and applied to various transport infrastructure projects. However, there is no definitive methodology to evaluate toll roads. This review discusses the impacts of toll roads then reviews the limitations of existing project evaluation methodologies when evaluating toll road impacts. The review identified gaps of knowledge of toll evaluations. First, the treatment of toll in project evaluation, particularly in Cost-Benefit Analysis requires further study to explore the appropriate methodology. Secondly, the project evaluation methodology needs to place strong emphasis on empirically based risk and uncertainty assessment. Addressing the limitations of the existing project evaluation methodologies leads to improvements of the methodology in practical level as well as fills the gap of knowledge of project evaluation for toll roads with respect to net impacts to the community.

The Road to Hell Is Paved with Good Interventions : A Pragmatic Examination of Humanitarian Intervention with Special Reference to Kosovo

Kansainvälisen oikeuden alaan kuuluvassa tutkielmassa käsitellään humanitaarisen intervention oikeutusta ja laillisuutta. Tutkimuskysymyksenä on, missä määrin humanitaarisilla näkökohdilla perusteltuja sotilaallisia toimia tai niillä uhkaamista voi pitää kansainvälisoikeudellisesti hyväksyttävänä ja millainen painoarvo ennakkotapauksena olisi annettava NATO-maiden Kosovossa toteuttamalle väliintulolle. Tutkielmassa perehdytään ihmisoikeusajattelun tiettyjen taustaoletusten kritiikkiin. Tarkastelun kohteena ovat erityisesti kannanotot, joiden mukaan ihmisoikeuksia ei voi pitää luonteeltaan universaaleina, sekä kyseiseen kritiikkiin liittyvät väitteet siitä, että ns. hegemonisessa asemassa olevat valtiot hyödyntävät ihmisoikeusargumentteja oikeuttaakseen voimankäyttönsä. Universaalisuuskritiikkiä voidaan pitää pitkälti perusteltuna, mutta nykyinen kansainvälinen yhteisö tarvitsee kuitenkin tietynlaisia yleismaailmallisia normeja voidakseen toimia tehokkaasti. Kritiikin ei voikaan katsoa pätevän humanitaarisen intervention kannalta keskeisiin ihmisoikeusnormeihin kuten kansanmurhan kieltoon, sillä kyseiset velvoitteet suojaavat kansainvälisen yhteisön toimivuutta ja uskottavuutta. Humanitaarisiin argumentteihin liittyy kuitenkin muita ongelmia: niillä on esimerkiksi aika ajoin pyritty oikeuttamaan sotilaallisia toimia, joissa ihmisoikeusnäkökohdat eivät välttämättä ole olleet etusijalla. Ihmisoikeuksille ei ole syytä antaa kansainvälisessä oikeudessa asemaa universaaleina "superargumentteina", jotka eivät olisi kyseenalaistettavissa. YK:n peruskirjan ja kansainvälisen tapaoikeuden näkökulmasta humanitaarisen intervention kaltaiseen voimankäyttöön vaaditaan turvallisuusneuvoston hyväksyntä, jota ei Kosovo-operaatioon saatu. Interventiota voi tässä suhteessa pitää yksiselitteisesti laittomana, sillä sen tueksi esitetyt oikeudelliset argumentit eivät ole vakuuttavia. Tapaukseen liittyvät ihmisoikeusnäkökohdat ovat kuitenkin siinä määrin merkittäviä, että ongelmaan ei ole perusteltua suhtautua tiukan legalistisesti. Operaation hyväksyminen moraaliargumenttien nojalla voisi kuitenkin johtaa nykyisten voimankäyttörajoitusten marginalisoitumiseen, mikä olisi yllä käsitellyn kritiikin valossa ongelmallista. Tutkielmassa nostetaan suositeltavaksi ratkaisuksi lähestymistapa, jossa Kosovon tapaus ymmärretään yksittäisenä oikeudenvastaisena mutta samalla oikeudenulkoisena poikkeustapauksena. Tällöin peruskirjan mukainen voimankäytön sääntely säilyy entisellään ilman että humanitaariset näkökohdat jäisivät tyystin huomiotta. Ratkaisu ei sulje pois mahdollisuutta suhtautua positiivisesti Kosovo-operaation mahdollisesti luomaan "poliittiseen normiin": suuren mittakaavan ihmisoikeusloukkaukset eivät jää Euroopassa seurauksitta. Ilman turvallisuusneuvoston suostumusta toteutettaviin humanitaarisiin interventioihin liittyvien käytännöllisten ja kansainvälisoikeudellisten riskien vuoksi niihin on kuitenkin aihetta suhtautua suurella varauksella.

Road Dust from Pavement Wear and Traction Sanding

Vehicles affect the concentrations of ambient airborne particles through exhaust emissions, but particles are also formed in the mechanical processes in the tire-road interface, brakes, and engine. Particles deposited on or in the vicinity of the road may be re-entrained, or resuspended, into air through vehicle-induced turbulence and shearing stress of the tires. A commonly used term for these particles is road dust . The processes affecting road dust emissions are complex and currently not well known. Road dust has been acknowledged as a dominant source of PM10 especially during spring in the sub-arctic urban areas, e.g. in Scandinavia, Finland, North America and Japan. The high proportion of road dust in sub-arctic regions of the world has been linked to the snowy winter conditions that make it necessary to use traction control methods. Traction control methods include dispersion of traction sand, melting of ice with brine solutions, and equipping the tires with either metal studs (studded winter tires), snow chains, or special tire design (friction tires). Several of these methods enhance the formation of mineral particles from pavement wear and/or from traction sand that accumulate in the road environment during winter. When snow and ice melt and surfaces dry out, traffic-induced turbulence makes some of the particles airborne. A general aim of this study was to study processes and factors underlying and affecting the formation and emissions of road dust from paved road surfaces. Special emphasis was placed on studying particle formation and sources during tire road interaction, especially when different applications of traction control, namely traction sanding and/or winter tires were in use. Respirable particles with aerodynamic diameter below 10 micrometers (PM10) have been the main concern, but other size ranges and particle size distributions were also studied. The following specific research questions were addressed: i) How do traction sanding and physical properties of the traction sand aggregate affect formation of road dust? ii) How do studded tires affect the formation of road dust when compared with friction tires? iii) What are the composition and sources of airborne road dust in a road simulator and during a springtime road dust episode in Finland? iv) What is the size distribution of abrasion particles from tire-road interaction? The studies were conducted both in a road simulator and in field conditions. The test results from the road simulator showed that traction sanding increased road dust emissions, and that the effect became more dominant with increasing sand load. A high percentage of fine-grained anti-skid aggregate of overall grading increased the PM10 concentrations. Anti-skid aggregate with poor resistance to fragmentation resulted in higher PM levels compared with the other aggregates, and the effect became more significant with higher aggregate loads. Glaciofluvial aggregates tended to cause higher particle concentrations than crushed rocks with good fragmentation resistance. Comparison of tire types showed that studded tires result in higher formation of PM emissions compared with friction tires. The same trend between the tires was present in the tests with and without anti-skid aggregate. This finding applies to test conditions of the road simulator with negligible resuspension. Source and composition analysis showed that the particles in the road simulator were mainly minerals and originated from both traction sand and pavement aggregates. A clear contribution of particles from anti-skid aggregate to ambient PM and dust deposition was also observed in urban conditions. The road simulator results showed that the interaction between tires, anti-skid aggregate and road surface is important in dust production and the relative contributions of these sources depend on their properties. Traction sand grains are fragmented into smaller particles under the tires, but they also wear the pavement aggregate. Therefore particles from both aggregates are observed. The mass size distribution of traction sand and pavement wear particles was mainly coarse, but fine and submicron particles were also present.

Taxonomy of factors which influence heavy metal build-up on urban road surfaces

Heavy metals build-up on urban road surfaces is a complex process and influenced by a diverse range of factors. Although numerous research studies have been conducted in the area of heavy metals build-up, limited research has been undertaken to rank these factors in terms of their influence on the build-up process. This results in limitations in the identification of the most critical factor/s for accurately estimating heavy metal loads and for designing effective stormwater treatment measures. The research study undertook an in-depth analysis of the factors which influence heavy metals build-up based on data generated from a number of different geographical locations around the world. Traffic volume was found to be the highest ranked factor in terms of influencing heavy metals build-up while land use was ranked the second. Proximity to arterial roads, antecedent dry days and road surface roughness has a relatively lower ranking. Furthermore, the study outcomes advances the conceptual understanding of heavy metals build-up based on the finding that with increasing traffic volume, total heavy metal build-up load increases while the variability decreases. The outcomes from this research study are expected to contribute to more accurate estimation of heavy metals build-up loads leading to more effective stormwater treatment design.

An engineering or behavioural approach? A study into employee’s perceptions regarding the effectiveness of occupational road safety initiatives

Background and Aims Considerable variation has been documented with fleet safety interventions’ abilities to create lasting behavioural change, and research has neglected to consider employees’ perceptions regarding the effectiveness of fleet interventions. This is a critical oversight as employees’ beliefs and acceptance levels (as well as the perceived organisational commitment to safety) can ultimately influence levels of effectiveness, and this study aimed to examine such perceptions in Australian fleet settings. Method 679 employees sourced from four Australian organisations completed a safety climate questionnaire as well as provided perspectives about the effectiveness of 35 different safety initiatives. Results Countermeasures that were perceived as most effective were a mix of human and engineering-based approaches: - (a) purchasing safer vehicles; - (b) investigating serious vehicle incidents, and; - (c) practical driver skills training. In contrast, least effective countermeasures were considered to be: - (a) signing a promise card; - (b) advertising a company’s phone number on the back of cars for complaints and compliments, and; - (c) communicating cost benefits of road safety to employees. No significant differences in employee perceptions were identified based on age, gender, employees’ self-reported crash involvement or employees’ self-reported traffic infringement history. Perceptions of safety climate were identified to be “moderate” but were not linked to self-reported crash or traffic infringement history. However, higher levels of safety climate were positively correlated with perceived effectiveness of some interventions. Conclusion Taken together, employees believed occupational road safety risks could best be managed by the employer by implementing a combination of engineering and human resource initiatives to enhance road safety. This paper will further outline the key findings in regards to practice as well as provide direction for future research.

Road kills of amphibians in different land use areas from Sharavathi river basin, central Western Ghats, India

A survey of amphibian mortality on roads was carried out in the Sharavathi river basin in the central Western Ghats. Road kills in three different land use areas: agricultural fields, water bodies and forests were recorded for four days along three 100m stretches in each type of area. One-hundred-and-forty-four individuals belonging to two orders, eight families, 11 genera and 13 species were recorded in the survey. Kills/km observed were: in forest 55, agricultural fields 38 and water bodies 27, for an overall average of 40 kills/km. Kill species compositions varied significantly between land use areas, but not overall kill rates.

Evaluation of the Queensland Minimum Passing Distance Road Rule

The two-year trial of the Queensland minimum passing distance (MPD) road rule began on 7 April 2014. The rule requires motor vehicles to provide cyclists a minimum lateral passing distance of one metre when overtaking cyclists in a speed zone of 60 km/h or less, and 1.5 metres when the speed limit is greater than 60 km/h. This document summarises the evaluation of the effectiveness of the new rule in terms of its: 1. practical implementation; 2. impact on road users’ attitudes and perceptions; and 3. road safety benefits. The Centre for Accident Research and Road Safety – Queensland (CARRS-Q) developed the evaluation framework (Haworth, Schramm, Kiata-Holland, Vallmuur, Watson & Debnath; 2014) for the Queensland Department of Transport and Main Roads (TMR) and was later commissioned to undertake the evaluation. The evaluation included the following components: • Review of correspondence received by TMR; • Interviews and focus groups with Queensland Police Service (QPS) officers; • Road user survey; • Observational study; and • Crash, injury and infringement data analysis.

Addressing the challenges of road safety in India: Are there lessons from Australia?

An invited panel presentation on "Road Safety: Challenges and Way outs" Overview - Road trauma trends in Australia - Key features of Australia’s approach to road safety - Role of university-based research centres in promoting road safety in Australia - UN Decade of Action for Road Safety

Eye movements and road hazard detection: Effects of blur and distractors

Purpose To examine the effects of optical blur, auditory distractors and age on eye movement patterns while performing a driving hazard perception test (HPT). Methods Twenty young (mean age 27.1 ± 4.6 years) and 20 older (73.3 ± 5.7 years) drivers with normal vision completed a HPT in a repeated-measures counterbalanced design while their eye movements were recorded. Testing was performed under two visual (best-corrected vision and with +2.00DS blur) and two distractor (with and without auditory distraction) conditions. Participants were required to respond to road hazards appearing in the HPT videos of real-world driving scenes and their hazard response times were recorded. Results Blur and distractors each significantly delayed hazard response time, by 0.42 and 0.76s respectively (p<0.05). A significant interaction between age and distractors indicated that older drivers were more affected by distractors than young drivers (response with distractors delayed by 0.96 and 0.60s respectively). There were no other two- or three-way interaction effect on response time. With blur, both groups fixated significantly longer on hazards before responding compared to best-corrected vision. In the presence of distractors, both groups exhibited delayed first fixation on the hazards and spent less time fixating on the hazards. There were also significant differences in eye movement characteristics between groups, where older drivers exhibited smaller saccades, delayed first fixation on hazards, and shorter fixation duration on hazards compared to the young drivers. Conclusions Collectively, the findings of delayed hazard response times and alterations in eye movement patterns with blur and distractors provide further evidence that visual impairment and distractors are independently detrimental to driving safety given that delayed hazard response times are linked to increased crash risk.

Automatic Road Extraction using High Resolution Satellite Image Based on Texture Progressive Analysis and Normalized Cut Method

In this paper the approach for automatic road extraction for an urban region using structural, spectral and geometric characteristics of roads has been presented. Roads have been extracted based on two levels: Pre-processing and road extraction methods. Initially, the image is pre-processed to improve the tolerance by reducing the clutter (that mostly represents the buildings, parking lots, vegetation regions and other open spaces). The road segments are then extracted using Texture Progressive Analysis (TPA) and Normalized cut algorithm. The TPA technique uses binary segmentation based on three levels of texture statistical evaluation to extract road segments where as, Normalizedcut method for road extraction is a graph based method that generates optimal partition of road segments. The performance evaluation (quality measures) for road extraction using TPA and normalized cut method is compared. Thus the experimental result show that normalized cut method is efficient in extracting road segments in urban region from high resolution satellite image.

Revisiting Coptotermes (Isoptera: Rhinotermitidae): a global taxonomic road map for species validity and distribution of an economically important subterranean termite genus

Coptotermes Wasmann (Isoptera: Rhinotermitidae) is one of the most economically important subterranean termite genera and some species are successful invaders. However, despite its important pest status, the taxonomic validity of many named Coptotermes species remains unclear. In this study, we reviewed all named species within the genus and investigated evidence supporting the validity of each named species. Species were systematically scrutinized according to the region of their original description: Southeast Asia, India, China, Africa, the Neotropics, and Australia. We estimate that of the currently 69 named species described by accepted nomenclatural rules, only 21 taxa have solid evidence for validity, 44 names have uncertain status, and the remaining species names should be synonymized or were made unavailable. Species with high degrees of invasiveness may be known under additional junior synonyms due to independent parochial descriptions. Molecular data for a vast majority of species are scarce and significant effort is needed to complete the taxonomic and phylogenetic revision of the genus. Because of the wide distribution of Coptotermes, we advocate for an integrative taxonomic effort to establish the distribution of each putative species, provide specimens and corresponding molecular data, check original descriptions and type specimens (if available), and provide evidence for a more robust phylogenetic position of each species. This study embodies both consensus and contention of those studying Coptotermes and thus pinpoints the current uncertainty of many species. This project is intended to be a roadmap for identifying those Coptotermes species names that need to be more thoroughly investigated, as an incentive to complete a necessary revision process.