Factors associated with postpartum weight retention in a Brazilian cohort

PURPOSE: To identify the factors associated with weight retention after pregnancy.METHODS: A cohort study was performed with 145 women receiving maternity care at a hospital in Caxias do Sul, Rio Grande do Sul, Brazil, aged 19 to 45 years, between weeks 38 and 42 of pregnancy. The patients were evaluated at one month, three months, and six months after delivery. Student's t-test or one-way analysis of variance (ANOVA) was used to compare groups, as indicated; correlations were assessed with Pearson's and Spearman's tests, as indicated; to identify and evaluate confounders independently associated with total weight loss, a multivariate linear regression analysis was performed and statistical significance was set at p≤0.05.RESULTS: There was a significant positive association between total weight gain - and a negative association with physical exercise during pregnancy - with total weight loss. Higher parity, inter-pregnancy interval, calorie intake, pre-pregnancy body mass index (BMI), weight gain related to pre-pregnancy BMI, presence and severity of depression, and lack of exclusive breastfeeding were directly associated with lower weight loss. Among nominal variables, level of education and marital status were significantly associated with total weight loss.CONCLUSION: In the present study, lower weight retention in the postpartum period was associated with higher educational attainment and with being married. Normal or below-normal pre-pregnancy BMI, physical activity and adequate weight gain during pregnancy, lower parity, exclusive breastfeeding for a longer period, appropriate or low calorie intake, and absence of depression were also determinants of reduced weight retention.

Bloqueio do receptor AT1 da Angiotensina II reduz o número de folículos antrais em ratas com obesidade induzida por dieta de cafeteria

OBJETIVO: Avaliar o desenvolvimento folicular em ratas Wistar com obesidade induzida por dieta de cafeteria (DCAF) submetidas à administração de losartan (LOS), um antagonista do receptor AT1 da Angiotensina II. MÉTODOS: Aos 21 dias de vida, as ratas foram separadas aleatoriamente em dois grupos: controle (CTL), que recebeu ração padrão, e cafeteria (CAF), que recebeu a DCAF, altamente palatável e calórica. Aos 70 dias de vida, início da idade reprodutiva, animais do grupo CAF foram subdivididos em dois grupos (n=15/grupo): CAF, que recebeu água, e CAF+LOS, que recebeu 30 mg/kg de peso corporal (PC) de LOS por gavagem durante 30 dias. O grupo CTL também recebeu água por gavagem. Aos 100 dias de vida foi realizada a eutanásia dos animais e o PC e das gorduras retroperitoneal, perigonadal e subcutânea foi avaliado. Os ovários direitos foram retirados para contagem do número dos diferentes tipos de folículos ovarianos. As concentrações plasmáticas dos hormônios folículo-estimulantes (FSH), luteinizante (LH), prolactina (PRL) e progesterona foram avaliadas. Os resultados foram expressos como média±erro padrão da média. Para análise estatística, foi utilizado one-way ANOVA, seguido pelo pós-teste de Newman-Keuls (p<0,05). RESULTADOS: O PC e das gorduras, assim como o número de folículos antrais, foi elevado no grupo CAF em relação ao CTL. Todavia, as concentrações de FSH e LH foram mais baixas entre os animais CAF. A administração de LOS reduziu o PC e das gorduras retroperitoneal e subcutânea, bem como o número de folículos antrais. O tratamento com LOS atenuou a redução das concentrações de FSH e de LH. As concentrações de progesterona e PRL foram semelhantes entre os grupos estudados. CONCLUSÃO: O uso de LOS pode favorecer o desenvolvimento folicular em fêmeas obesas e pode possibilitar sua utilização como fármaco coadjuvante no tratamento da infertilidade associada à obesidade.

Improving Product Information Management in Global Project Based Manufacturing

The transition of project based manufacturing business, even more into global networks, sets up challenges for companies to manage their business in this new operating environment. One way to tackle these challenges is the successful management of product information through an extended product’s lifecycle. Thus, one objective of this research is to find ways how product information management in global project based manufacturing can be improved. Another objective is to find a solution how the target company can improve its product information management in the offer-to-procurement business process. Due to the nature of the topic, the study follows constructive research methodology with qualitative methods. By combining literature related to this topic a framework is created to improve product information management in global project based manufacturing. The improvement process in this framework is based on a systematic approach from the current state towards target state. A general aim for improvements should be the integrated product and project lifecycle information management through Lean approach. This introduced framework is applied to the target company through two case projects. Data for building view of current state and analysis is collected mostly by theme interviews and also utilizing other material from the target company. Used tools help to analyzing was the BPMN and the Trace matrix for business chains. Results of the improvement process are collected in a solution proposal which contain the strategic target state as well as long and short term objectives. The strategic target state is defined as controlled customization. Also during the improvement process are created the Information requirements chart in the offer-to-procurement business process, and the Project related initial information questionnaire to customer.

Tuulivoima; kehitys, investoinnit ja työllisyys Suomessa

Tuulivoimalla on pitkä historia. Tuulivoima soveltuu nykyajan energiantuotantoon. Suunniteltaessa ja rakennettaessa uusia tuulivoimaloita on tunnettava tuulisuuteen vaikuttavat tekijät samoin kuin tuulivoimalan sijoituspaikalla on tehtävä perusteelliset tuu-liolosuhdemittaukset. Nykyisellä sähkön hinnalla tuulivoimalat eivät ole täysin kilpailukykyisiä, joten niitä on tuettava. Tukimuotoja on monia. Suomessa pääasiallinen tukimuoto on syöttötariffi. Vallitseva politiikka on ratkaisevassa asemassa luotaessa tukijärjestelmiä tuulivoimalle. Suomessa tehtävät tuulivoimainvestoinnit ovat kasvussa. Tuulivoimaan liittyy niin hyviä kuin huonoja puolia. Huonot puolet ovat ratkaistavissa. Päästökaupan kannalta on tuulivoima yksi keino alentaa kasvihuonekaasuja ilmakehässä. Tuulivoiman osuuden kasvattaminen sähköntuotannossa luo työpaikkoja Suomeen ja luo vientimahdollisuuksia ulkomaille. Tuulivoimalla on valoisa tulevaisuus.

Determinação da concentração alveolar mínima do isofluorano em catetos (Tayassu tajacu)

A anestesia inalatória vem sendo amplamente difundida na medicina veterinária, no entanto seu uso em animais selvagens ainda é restrito, não sendo observado nenhum estudo referente à sua utilização na espécie Tayassu tajacu. O objetivo da pesquisa foi determinar a concentração alveolar mínima (CAM) do isofluorano em catetos e apresentar os efeitos desta administração sobre as variáveis hemodinâmicas e respiratórias, como também a qualidade da recuperação anestésica. Utilizou-se 10 animais, machos, com idade variando de 1 a 3 anos oriundos do Centro de Multiplicação de Animais Silvestres da Universidade Federal Rural do Semi-Árido, Brasil. Todos os animais tiveram anestesia induzida com 7mg.kg-1 de propofol e posteriormente foram conectados a circuito anestésico com isofluorano e oxigênio 100%. O estímulo noceptivo supramáximo adotado foi pinçamento interdigital, o qual era realizado após 15 minutos de espera para cada concentração de isofluorano fornecida. Ao ser observada resposta negativa frente ao estímulo a concentração era reduzida em 20%, quando verificada resposta positiva o estímulo era cessado, calculando-se a partir daí o valor da CAM. Observou-se dados quantitativos e qualitativos referentes à recuperação. Utilizou-se o teste de normalidade de Shapiro Wilk e de homogeneidade de variânica de Levene, as variáveis avaliadas foram submetidas à One Way ANOVA-RM para medidas repetidas, seguidas por Teste Tukey, sendo os dados expressos em média e desvio padrão. A CAM do isofluorano foi de 2,4%, sendo a CAM cirúrgica igual a 3,5%. Observou-se ação depressiva do isofluorano sobre a pressão arterial, frequência cardíaca e respiratória quando comparada a média dessas variáveis para animais acordados, entretanto durante a manutenção anestésica mantiveram-se estáveis. Observou-se acidose metabólica no período pré-anestésico o qual foi compensado após a realização da anestesia inalatória. A recuperação anestésica foi tranquila e rápida. Concluiu-se que a CAM do isofluorano para catetos foi maior que a observada em espécies afins. O isofluorano pode ser utilizado nesta espécie, sendo considerado seguro e eficaz. A recuperação dos animais após anestesia com isofluorano foi livre de excitação.

Stop bugging me! : diversity in appearance of warning coloration

In nature, many animals use body coloration to communicate with each other. For example, colorations can be used as signals between individuals of the same species, but also to recognise individuals of other species, and if they may comprise a threat or not. Many animals use protective coloration to avoid predation. The two most common strategies of protective coloration are camouflage and aposematism. Camouflaged animals have coloration that minimises detection, usually by matching colours or structures in the background. Aposematic animals, on the other hand, signal to predators that they are defended. The defence can be physical structures, such as spikes and hairs, or chemical compounds that make the animal distasteful or even deadly toxic. In order for the warning signal to be effective, the predator has to recognise it as such. Studies have shown that birds for example, that are important visual predators on insects, learn to recognise and avoid unpalatable prey faster if they contrast the background or have large internal contrasts. Typical examples of aposematic species have conspicuous colours like yellow, orange or red, often in combination with black. My thesis focuses on the appearance and function of aposematic colour patterns. Even though researchers have studied aposematism for over a century, there is still a lot we do not know about the phenomenon. For example, as it is crucial that the predators recognise a warning signal, aposematic colorations should assumingly evolve homogeneously and be selected for maximal conspicuousness. Instead, there is an extensive variation of colours and patterns among warning colorations, and it is not uncommon to find typical cryptic colours, such as green and brown in aposematic colour patterns. One hypothesis to this variation is that an aposematic coloration does not have to be maximally signalling in order to be effective, instead it is sufficient to have distinct features that can be easily distinguished from edible prey. To be maximally conspicuous is one way to achieve this, but not the only way. Another hypothesis is that aposematic prey that do not exhibit maximal conspicuousness can exploit both camouflage and aposematism in a distance-dependent fashion, by being signalling when seen close up but camouflaged at a distance. Many prey animals also make use of both strategies by shifting colour at different ecological conditions such as seasonal variations, fluctuations in food resources or between life stages. Yet another explanation for the variation may be that prey animals are usually exposed to several predator species that vary in visual perception and tolerance towards various toxins. The aim with this thesis is, by studying their functions, to understand why aposematic warning signals vary in appearance, specifically in the level of conspicuousness, and if warning coloration can be combined with camouflage. In paper I, I investigated if the colour pattern of the aposematic larva of the Apollo butterfly (Parnassius apollo) can switch function with viewing distance, and be signalling at close range but camouflaged at a distance, by comparing detection time between different colour variants and distances. The results show that the natural coloration has a dual distance-dependent function. Moreover, the study shows that an aposematic coloration does not have to be selected for maximal conspicuousness. A prey animal can optimise its coloration primarily by avoiding detection, but also by investing in a secondary defence, which presence can be signalled if detected. In paper II, I studied how easily detected the coloration of the firebug (Pyrrhocoris apterus), a typical aposematic species, is at different distances against different natural backgrounds, by comparing detection time between different colour variants. Here, I found no distance-dependent switch in function. Instead, the results show that the coloration of the firebug is selected for maximal conspicuousness. One explanation for this is that the firebug is more mobile than the butterfly larva in study I, and movement is often incompatible with efficient camouflage. In paper III, I investigated if a seasonal related colour change in the chemically defended striated shieldbug (Graphosoma lineatum) is an adaptation to optimise a protective coloration by shifting from camouflage to aposematism between two seasons. The results confirm the hypothesis that the coloration expressed in the late summer has a camouflage function, blending in with the background. Further, I investigated if the internal pattern as such increased the effectiveness of the camouflage. Again, the results are in accordance with the hypothesis, as the patterned coloration was more difficult to detect than colorations lacking an internal pattern. This study shows how an aposematic species can optimise its defence by shifting from camouflage to aposematism, but in a different fashion than studied in paper I. The aim with study IV was to study the selection on aposematic signals by identifying characteristics that are common for colorations of aposematic species, and that distinguish them from colorations of other species. I compared contrast, pattern element size and colour proportion between a group of defended species and a group of undefended species. In contrast to my prediction, the results show no significant differences between the two groups in any of the analyses. One explanation for the non-significant results could be that there are no universal characteristics common for aposematic species. Instead, the selection pressures acting on defended species vary, and therefore affect their appearance differently. Another explanation is that all defended species may not have been selected for a conspicuous aposematic warning coloration. Taken together, my thesis shows that having a conspicuous warning coloration is not the only way to be aposematic. Also, aposematism and camouflage is not two mutually exclusive opposites, as there are prey species that exploit both strategies. It is also important to understand that prey animals are exposed to various selection pressures and trade-offs that affect their appearance, and determines what an optimal coloration is for each species or environment. In conclusion, I hold that the variation among warning colorations is larger and coloration properties that have been considered as archetypically aposematic may not be as widespread and representative as previously assumed.

Clinical and blood gasometric parameters during Vaquejada competition

ABSTRACT: Clinical and complementary analysis are good alternatives to evaluate physiological demand in performance horses. The aim of this study was to assess whether the physical effort variation of the three-day Vaquejada competition (a Brazilian form of bullfighting) reflected in clinical and blood gasometric changes. During the competition eight sprints have been performed on the first day (D1), eight on the second (D2) and three on the last one (D3). Ten horses were evaluated by checking heart and respiratory rates and collecting blood samples for use in portable chemistry analyzer. Through that, it was assessed potential of hydrogen ion (pH), carbon dioxide pressure (pCO2), bicarbonate (HCO3-) and titratable base concentration (cBase). Evaluations were carried with resting of at least twenty hours, before physical activity (D0), as control parameter, and up to thirty minutes after each sprint. Clinical parameters have increased on D1, D2 and D3, when compared to D0, which demonstrated the increased demand for substrate and oxygen to the cells.. Blood gasometric trial showed reductions of all variables, most marked between D1 and D2. It was verified less alteration of all clinical and blood gasometric parameters in D3 against D0. We concluded that the change effort between days of competition influenced the clinical and blood gas parameters, demonstrating appropriate physiological response. The data were presented as mean and standard error of the mean (mean ± SEM) obtained in different days. Normality was confirmed by the Kolmogorov-Sminov test and data were compared by one-way ANOVA, followed by post-test Holm-Sidak (GraphPad Prism 2.6 for Windows, GraphPad Software, San Diego, CA, USA). P≤0.05 was considered as statistically significant.

Adsorptiojäähdyttimen käytön kannattavuus kaukolämpöjärjestelmässä

Vantaa Energy has decided to find out the district cooling business opportunities in Vantaa. One reason for starting up the cooling business is Vantaa Energy's waste-to-energy power plant which is under construction. In the future, especially in the summer time there is an oversupply of district heating because of the new power plant. The cooling using the district heat could be one way to increase the consumption of district heat in the summer. This thesis examines the use of adsorption cooling profitability. Adsorption refrigerator is a machine which uses heat as the driving energy. At Vantaa Energy's case, district heat produced at cogeneration plants would be used. The literature section of this thesis includes descriptions of district cooling, building cooling demand, as well as different ways to produce cooling energy. A tool for profitability calculations was made. It shows the payback period, internal rate of return and net present value of different projects. Based on the calculations adsorption refrigeration is not profitable. This is primarily due to the high price of the adsorption refrigerator. Payback periods become long even when the used heat energy is free. In addition, the lack of availability of the refrigerators and operating experience could become a partial barrier to the use of technology even if the investment would become profitable.

Blade and rod coating of low solid dispersions

Työn aiheena oli tehdä ohut barrierkalvo terä- tai sauvapäällystys menetelmällä. Erilaisissa elintarvikepakkauksissa käytetään hyviä barrier-ominaisuuksia omaavia ohuita päällysteitä. Elintarvikepakkauksen tehtävä on suojata pakattua tuotetta ympäristöltä, mahdollistaa helppo kuljetus ja säilytys sekä antaa tarvittavat tiedot tuotteesta tuotteen käsittelijöille ja loppukäyttäjille. Diplomityön teoriaosuudessa keskityttiin barrierpäällystykseen, eri päällystysmenetelmiin, niiden erityisvaatimuksiin ja ominaisuuksiin. Teoriaosuudessa käsiteltiin myös vaadittavia barrier-ominaisuuksia ja haasteita niiden saavuttamisessa. Kirjallisuuden perusteella haasteiksi nousivat helposti muodostuvat mikroreiät. Kokeellinen osa jakautui kahteen osakokonaisuuteen: laboratoriokokeisiin ja pilot-koeajoon. Laboratoriokokeita tehtiin ennen pilot-ajoa, jotta pilot-koeajoon voitiin valita parhaat päällystereseptit. Pilot-koeajonäytteiden päällystemäärät osoittautuivat liian pieniksi ja siksi laboratoriossa tehtiin jatkotutkimuksia riittävän päällystemäärän saavuttamiseksi. Tämän työnperusteella pohjakartongin ominaisuuksilla, erityisesti karheudella, on merkittävä vaikutus päällystyksen onnistumisessa ja yksinkertaisilla resepteillä ja päällystysmenetelmillä ei saada tarpeeksi laadukasta kalvoa.

Monitoramento da composição específica da comunidade de macrófitas aquáticas no reservatório Luis Eduardo Magalhães

O objetivo deste trabalho foi avaliar a composição e distribuição espacial e temporal da comunidade de macrófitas aquáticas diante de algumas variáveis abióticas no reservatório Luis Eduardo Magalhães, localizado no rio Tocantins. As coletas foram bimestrais, no período de março de 2005 a janeiro de 2006, em cinco regiões. Em cada região foram demarcados 15 pontos de coleta. Foram mensuradas a transparência da água e a condutividade elétrica em cada ponto de amostragem. Para avaliar a composição da comunidade e a distribuição das espécies, foi percorrida uma distância de cerca de 100 m de margem com embarcação em baixa velocidade, por aproximadamente 10 minutos. As espécies submersas foram inventariadas com um rastelo até 4 m de profundidade. Foi calculada a frequência de ocorrência e a diversidade beta. Os dados de presença e ausência das espécies foram analisados utilizando Análise de Correspondência Destendenciada DCA. Uma ANOVA One-Way foi empregada para avaliar o efeito dos períodos e regiões sobre as variáveis abióticas e bióticas. Foi aplicado o teste a posteriori de Tukey quando houve diferenças significativas entre as variáveis analisadas (P<0,05). Foi registrado um total de 50 espécies. As espécies com maior frequência foram Salvinia auriculata, Oxycaryum cubense e Najas microcarpa (submersa). A maior riqueza de espécies foi registrada nas regiões fluviais do reservatório (Areias e Tocantins). Os resultados evidenciam, ainda, que a variação espacial na composição das assembleias foi mais acentuada que a variação temporal.

Project Resource Management in R&D Public Sector Organization

In R&D organizations multiple projects are executed concurrently. Problems arises in managing shared resources since they are needed by multiple projects simultaneously. The objective of this thesis was to study how the project and resource management could be developed in a public sector R&D organization. The qualitative research was carried out in the Magnetic Measurements section at CERN where the section measures magnets for particle accelerators and builds state of the art measurement devices for various needs. Hence, the R&D and measurement projects are very time consuming and very complex. Based on the previous research and the requirements from the organization the best alter- native for resource management was to build a project management information system. A centralized database was constructed and on top of it was built an application for interacting and visualizing the project data. The application allows handling project data, which works as a basis for resource planning before and during the projects are executed. It is one way to standardize the work-flow of projects, which strengthens the project process. Additionally, it was noted that the inner customer’s database, the measurement system and the new application needed to be integrated. Further integration ensures that the project data is received efficiently from customers and available not only within the application but also during the concrete work. The research results introduced a new integrated application, which centralizes the project information flow with better visibility.

Sucrose ingestion causes opioid analgesia

The intake of saccharin solutions for relatively long periods of time causes analgesia in rats, as measured in the hot-plate test, an experimental procedure involving supraspinal components. In order to investigate the effects of sweet substance intake on pain modulation using a different model, male albino Wistar rats weighing 180-200 g received either tap water or sucrose solutions (250 g/l) for 1 day or 14 days as their only source of liquid. Each rat consumed an average of 15.6 g sucrose/day. Their tail withdrawal latencies in the tail-flick test (probably a spinal reflex) were measured immediately before and after this treatment. An analgesia index was calculated from the withdrawal latencies before and after treatment. The indexes (mean ± SEM, N = 12) for the groups receiving tap water for 1 day or 14 days, and sucrose solution for 1 day or 14 days were 0.09 ± 0.04, 0.10 ± 0.05, 0.15 ± 0.08 and 0.49 ± 0.07, respectively. One-way ANOVA indicated a significant difference (F(3,47) = 9.521, P<0.001) and the Tukey multiple comparison test (P<0.05) showed that the analgesia index of the 14-day sucrose-treated animals differed from all other groups. Naloxone-treated rats (N = 7) receiving sucrose exhibited an analgesia index of 0.20 ± 0.10 while rats receiving only sucrose (N = 7) had an index of 0.68 ± 0.11 (t = 0.254, 10 degrees of freedom, P<0.03). This result indicates that the analgesic effect of sucrose depends on the time during which the solution is consumed and extends the analgesic effects of sweet substance intake, such as saccharin, to a model other than the hot-plate test, with similar results. Endogenous opioids may be involved in the central regulation of the sweet substance-produced analgesia.

Stability of Natural Colorants of Plant Origin

In recent years, there have been studies that show a correlation between the hyperactivity of children and use of artificial food additives, including colorants. This has, in part, led to preference of natural products over products with artificial additives. Consumers have also become more aware of health issues. Natural food colorants have many bioactive functions, mainly vitamin A activity of carotenoids and antioxidativity, and therefore they could be more easily accepted by the consumers. However, natural colorant compounds are usually unstable, which restricts their usage. Microencapsulation could be one way to enhance the stability of natural colorant compounds and thus enable better usage for them as food colorants. Microencapsulation is a term used for processes in which the active material is totally enveloped in a coating or capsule, and thus it is separated and protected from the surrounding environment. In addition to protection by the capsule, microencapsulation can also be used to modify solubility and other properties of the encapsulated material, for example, to incorporate fat-soluble compounds into aqueous matrices. The aim of this thesis work was to study the stability of two natural pigments, lutein (carotenoid) and betanin (betalain), and to determine possible ways to enhance their stability with different microencapsulation techniques. Another aim was the extraction of pigments without the use of organic solvents and the development of previously used extraction methods. Stability of pigments in microencapsulated pigment preparations and model foods containing these were studied by measuring the pigment content after storage in different conditions. Preliminary studies on the bioavailability of microencapsulated pigments and sensory evaluation for consumer acceptance of model foods containing microencapsulated pigments were also carried out. Enzyme-assisted oil extraction was used to extract lutein from marigold (Tagetes erecta) flower without organic solvents, and the yield was comparable to solvent extraction of lutein from the same flowers. The effects of temperature, extraction time, and beet:water ratio on extraction efficiency of betanin from red beet (Beta vulgaris) were studied and the optimal conditions for maximum yield and maximum betanin concentration were determined. In both cases, extraction at 40 °C was better than extraction at 80 °C and the extraction for five minutes was as efficient as 15 or 30 minutes. For maximum betanin yield, the beet:water ratio of 1:2 was better, with possibly repeated extraction, but for maximum betanin concentration, a ratio of 1:1 was better. Lutein was incorporated into oil-in-water (o/w) emulsions with a polar oil fraction from oat (Avena sativa) as an emulsifier and mixtures of guar gum and xanthan gum or locust bean gum and xanthan gum as stabilizers to retard creaming. The stability of lutein in these emulsions was quite good, with 77 to 91 percent of lutein being left after storage in the dark at 20 to 22°C for 10 weeks whereas in spray dried emulsions the retention of lutein was 67 to 75 percent. The retention of lutein in oil was also good at 85 percent. Betanin was incorporated into the inner w1 water phase of a water1-in-oil-inwater2 (w1/o/w2) double emulsion with primary w1/o emulsion droplet size of 0.34 μm and secondary w1/o/w2 emulsion droplet size of 5.5 μm and encapsulation efficiency of betanin of 89 percent. In vitro intestinal lipid digestion was performed on the double emulsion, and during the first two hours, coalescence of the inner water phase droplets was observed, and the sizes of the double emulsion droplets increased quickly because of aggregation. This period also corresponded to gradual release of betanin, with a final release of 35 percent. The double emulsion structure was retained throughout the three-hour experiment. Betanin was also spray dried and incorporated into model juices with different pH and dry matter content. Model juices were stored in the dark at -20, 4, 20–24 or 60 °C (accelerated test) for several months. Betanin degraded quite rapidly in all of the samples and higher temperature and a lower pH accelerated degradation. Stability of betanin was much better in the spray dried powder, with practically no degradation during six months of storage in the dark at 20 to 24 °C and good stability also for six months in the dark at 60 °C with 60 percent retention. Consumer acceptance of model juices colored with spray dried betanin was compared with similar model juices colored with anthocyanins or beet extract. Consumers preferred beet extract and anthocyanin colored model juices over juices colored with spray dried betanin. However, spray dried betanin did not impart any off-odors or off-flavors into the model juices contrary to the beet extract. In conclusion, this thesis describes novel solvent-free extraction and encapsulation processes for lutein and betanin from plant sources. Lutein showed good stability in oil and in o/w emulsions, but slightly inferior in spray dried emulsions. In vitro intestinal lipid digestion showed a good stability of w1/o/w2 double emulsion and quite high retention of betanin during digestion. Consumer acceptance of model juices colored with spray dried betanin was not as good as model juices colored with anthocyanins, but addition of betanin to real berry juice could produce better results with mixture of added betanin and natural berry anthocyanins could produce a more acceptable color. Overall, further studies are needed to obtain natural colorants with good stability for the use in food products.

Correlation of mixed lymphocyte culture with chronic graft-versus-host disease following allogeneic stem cell transplantation

The purpose of the present study was to evaluate the mixed lymphocyte culture as a predictive assay of acute and chronic graft-versus-host disease (GVHD). We studied 153 patients who received a first bone marrow transplantation from human leukocyte antigen-identical siblings. Acute GVHD was observed in 26 of 128 (20.3%) patients evaluated and chronic GVHD occurred in 60 of 114 (52.6%). One-way mixed lymphocyte culture (MLC) assays were performed by the standard method. MLC results are reported as the relative response (RR) from donor against patient cells. The responses ranged from -47.0 to 40.7%, with a median of 0.5%. The Kaplan-Meier probability of developing GVHD was determined for patients with positive and negative MLC. There was no significant difference in incidence of acute GVHD between the groups studied. However, the incidence of chronic GVHD was higher in recipients with RR >4.5% than in those with RR <=4.5%. The Cox Proportional Hazards model was used to examine the effect of MLC levels on incidence of chronic GVHD, while adjusting for the potential confounding effect of others suspected or observed risk factors. The relative risk of chronic GVHD was 2.5 for patients with positive MLC (RR >4.5%), 2.9 for those who received peripheral blood progenitor cells as a graft, and 2.2 for patients who developed previous acute GVHD. MLC was not useful for predicting acute GVHD, but MLC with RR >4.5% associated with other risk factors could predict the development of chronic GVHD, being of help for the prevention and/or treatment of this late complication.

Possibility of press forming wood films into primary packaging

In recent times the packaging industry is finding means to maximize profit. Wood used to be the most advantageous and everyday material for packaging, worktables, counters, constructions, interiors, tools and as materials and utensils in the food companies in the world. The use of wood has declined vigorously, and other materials like plastic, ceramic, stainless steel, concrete, and aluminum have taken its place. One way that the industry could reduce its cost is by finding possibilities of using wood for primary packaging after which it can be safely recycled or burned as a carbon source for energy. Therefore, the main objective of this thesis is to investigate the possibility of press-forming a wood film into primary packaging. In order to achieve the stated objectives, discussion on major characteristics of wood in terms of structure, types and application were studied. Two different wood species, pine and birch were used for the experimental work. These were provided by a local carpentry workshop in Lappeenranta and a workshop in Ruokolahti supervised by Professor Timo Kärki. Laboratory tests were carried out at Lappeenranta University of Technology FMS workshop on Stenhøj EPS40 M hydraulic C-frame press coupled with National Instruments VI Logger and on the Adjustable packaging line machine at LUT Packaging laboratory. The tests succeeded better on the LUT packaging line than on the Stenhoj equipment due to the integrated heating system in the machine. However, there is much work to be done before the quality of a tray produced from the wood film is comparable to that of the wood plastic composite tray.