988 resultados para EUROPEAN SYSTEM
Resumo:
One of the targets of the climate and energy package of the European Union is to increase the energy efficiency in order to achieve a 20 percent reduction in primary energy use compared with the projected level by 2020. The energy efficiency can be improved for example by increasing the rotational speed of large electrical drives, because this enables the elimination of gearboxes leading to a compact design with lower losses. The rotational speeds of traditional bearings, such as roller bearings, are limited by mechanical friction. Active magnetic bearings (AMBs), on the other hand, allow very high rotational speeds. Consequently, their use in large medium- and high-speed machines has rapidly increased. An active magnetic bearing rotor system is an inherently unstable, nonlinear multiple-input, multiple-output system. Model-based controller design of AMBs requires an accurate system model. Finite element modeling (FEM) together with the experimental modal analysis provides a very accurate model for the rotor, and a linearized model of the magneticactuators has proven to work well in normal conditions. However, the overall system may suffer from unmodeled dynamics, such as dynamics of foundation or shrink fits. This dynamics can be modeled by system identification. System identification can also be used for on-line diagnostics. In this study, broadband excitation signals are adopted to the identification of an active magnetic bearing rotor system. The broadband excitation enables faster frequency response function measurements when compared with the widely used stepped sine and swept sine excitations. Different broadband excitations are reviewed, and the random phase multisine excitation is chosen for further study. The measurement times using the multisine excitation and the stepped sine excitation are compared. An excitation signal design with an analysis of the harmonics produced by the nonlinear system is presented. The suitability of different frequency response function estimators for an AMB rotor system are also compared. Additionally, analytical modeling of an AMB rotor system, obtaining a parametric model from the nonparametric frequency response functions, and model updating are discussed in brief, as they are key elements in the modeling for a control design. Theoretical methods are tested with a laboratory test rig. The results conclude that an appropriately designed random phase multisine excitation is suitable for the identification of AMB rotor systems.
Resumo:
Pumping systems account for over 20 % of all electricity consumption in European industry. Optimization and correct design of such systems is important and there is a reasonable amount of unrealized energy saving potential in old pumping systems. The energy efficiency and therefore also the energy consumption of a pumping system heavily depends on the correct dimensioning and selection of devices. In this work, a graphical optimization tool for pumping systems is developed in Matlab programming language. The tool selects optimal pump, electrical motor and frequency converter for existing pumping process and calculates the life cycle costs of the whole system. The tool could be used as an aid when choosing the machinery and to analyze the energy consumption of existing systems. Results given by the tool are compared to the results of laboratory tests. The selection of pump and motor works reasonably well, but the frequency converter selection still needs development
Resumo:
Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014
Resumo:
Currently widely accepted consensus is that greenhouse gas emissions produced by the mankind have to be reduced in order to avoid further global warming. The European Union has set a variety of CO2 reduction and renewable generation targets for its member states. The current energy system in the Nordic countries is one of the most carbon free in the world, but the aim is to achieve a fully carbon neutral energy system. The objective of this thesis is to consider the role of nuclear power in the future energy system. Nuclear power is a low carbon energy technology because it produces virtually no air pollutants during operation. In this respect, nuclear power is suitable for a carbon free energy system. In this master's thesis, the basic characteristics of nuclear power are presented and compared to fossil fuelled and renewable generation. Nordic energy systems and different scenarios in 2050 are modelled. Using models and information about the basic characteristics of nuclear power, an opinion is formed about its role in the future energy system in Nordic countries. The model shows that it is possible to form a carbon free Nordic energy system. Nordic countries benefit from large hydropower capacity which helps to offset fluctuating nature of wind power. Biomass fuelled generation and nuclear power provide stable and predictable electricity throughout the year. Nuclear power offers better energy security and security of supply than fossil fuelled generation and it is competitive with other low carbon technologies.
Resumo:
This guide summarizes useful information about the European Space Agency (ESA), the European space industry, the ECSS standards and product assurance for small and medium enterprises that are aiming to enter the industry. Additionally, the applicability of agile development in space projects is discussed.
Resumo:
Depuis plusieurs années, les États membres de l’Union européenne (UE) se soumettent à des politiques restrictives, en matière d’asile, qui les contraignent à respecter leur engagement de protéger les personnes qui fuient la persécution. Plusieurs politiques de dissuasion de l’UE sont controversées. Certaines ont d’abord été élaborées dans différents États, avant que l’UE ne mette en place une politique commune en matière d’asile. Certaines des ces politiques migratoires ont été copiées, et ont un effet négatif sur la transformation des procédures d’asile et du droit des réfugiés dans d’autres pays, tel le Canada. En raison des normes minimales imposées par la législation de l’UE, les États membres adoptent des politiques et instaurent des pratiques, qui sont mises en doute et sont critiquées par l’UNHCR et les ONG, quant au respect des obligations internationales à l'égard des droits de la personne. Parmi les politiques et les pratiques les plus critiquées certaines touchent le secteur du contrôle frontalier. En tentant de remédier à l’abolition des frontières internes, les États membres imposent aux demandeurs d’asile des barrières migratoires quasi impossibles à surmonter. Les forçant ainsi à s’entasser dans des centres de migration, au nord de l’Afrique, à rebrousser chemin ou encore à mourir en haute mer.
Resumo:
"L’auteure Lucie Guibault aborde la question des ""logiciels libres"" dans le cadre des droits d’auteurs et des brevets. Ces logiciels sont des programmes informatiques qui sont gratuitement distribués au public, dont la modification et la redistribution sont fortement encouragées, mais dont la vente ou la commercialisation est découragée ou même carrément prohibée. Ces caractéristiques particulières distinguent les logiciels libres des ""programmes propriétés"" traditionnels, qui se basent sur le principe que le créateur d’un programme en possède les droits de propriété et qu’il est le seul autorisé à le modifier ou le vendre, sous réserve de sa capacité à faire cession de ces droits. Les logiciels libres sont fondés sur une idéologie de coopération, qui promeut la propagation des idées et des connaissances et qui favorise ainsi la création de meilleurs logiciels. L’auteure présente les grandes caractéristiques des trois principales licences de logiciels libres, soit la ""General Public License"", la licence ""Berkeley Software Distribution"" et la ""Mozilla Public License"". Elle soutient que ces logiciels libres et les régimes normatifs qui les encadrent sont à l’origine d’un changement de paradigme au sein des régimes européens et hollandais de protection des droits d’auteurs et des brevets. La première partie de l’article analyse les régimes des droits d’auteur des trois licences de logiciels libres. L’auteure souligne que ces régimes ont été établis en se basant sur la prémisse qu’il n’y a pas de distinction significative entre les créateurs et les utilisateurs de logiciels libres. Les régimes normatifs reflètent cette situation en prévoyant un ensemble de droits et d’obligations pour les utilisateurs dans le cadre de l’utilisation, de la reproduction, de la modification et de la redistribution gratuite des logiciels libres. L’auteur explique comment ces régimes normatifs s’intègrent au sein de la législation européenne et hollandaise, entre autre au niveau du droit de propriété, du droit commercial, du droit des communications et du droit des obligations. L’auteur démontre que, de façon générale, ces régimes normatifs législatifs semblent s’être adéquatement adaptés aux nouvelles réalités posées par les règles de droits d’auteurs des logiciels libres. La seconde partie aborde la problématique du droit des brevets, tel que défini par la législation européenne et hollandaise. La plupart des utilisateurs et créateurs de logiciels libres s’opposent aux régimes de brevets traditionnels, qui limitent l’innovation et les possibilités de développement techniques. L’auteur décrit les différents régimes alternatifs de brevets offerts par les trois licences de logiciels libres. De plus, l’auteur présente l’encadrement légal pour ces nouveaux brevets, tel que défini par les législations européennes et hollandaises. Elle soutient que cet encadrement légal est inadéquat et qu’il n’est pas adapté aux besoins des utilisateurs de logiciels libres."
Resumo:
The microwave dielectric properties of ZnAl2O4 spinels were investigated and their properties were tailored by adding different mole fractions of Ti02. The samples were synthesized using the mixed oxide rout.e. The phase purity and crystal structure were identified using X-ray diffraction technique. The sintered specimens were characterized in the microwave frequency range (3-13 GHz). The ZnA12O4 ceramics exhibited interesting dielectric properties (dielectric constant (e,.) = 8.5, unloaded quality factor (Q.) = 4590 at 12.27 GHz and temperature coefficient of resonant frequency (Tf) = -79 ppm/°C). Addition of Ti02 into the spinel improved its properties and the Tf approached zero for 0.83ZnAl2O4- 0.17TiO2• This temperature compensated composition has excellent microwave dielectric properties (Cr _ 12.67, Q, = 9950 at 10.075 GHz) which can be exploited for microwave substrate applications
Resumo:
Quality related problems have become dominant in the seafood processing industry in Kerala. This has resulted in the rejection of seafood sent from India to many destinations. The latest being the total block listing of seafood companies from India from being exported to Europe and partial block listing by the US. The quality systems prevailed in the seafood industry in India were outdated and no longer in use in the developed world. According to EC Directive discussed above all the seafood factories exporting to European countries have to adopt HACCP. Based on this, EIA has now made HACCP system mandatory in all the seafood processing factories in India. This transformation from a traditional product based inspection system to a process control system requires thorough changes in the various stages of production and quality management. This study is conducted by the author with to study the status of the existing infrastructure and quality control system in the seafood industry in Kerala with reference to the recent developments in the quality concepts in international markets and study the drawbacks, if any, of the existing quality management systems in force in the seafood factories in Kerala for introducing the mandatory HACCP concept. To assess the possibilities of introducing Total Quality Management system in the seafood industry in Kerala in order to effectively adopt the HACCP concept. This is also aimed at improving the quality of the products and productivity of the industry by sustaining the world markets in the long run.
Resumo:
Der Europäische Markt für ökologische Lebensmittel ist seit den 1990er Jahren stark gewachsen. Begünstigt wurde dies durch die Einführung der EU-Richtlinie 2092/91 zur Zertifizierung ökologischer Produkte und durch die Zahlung von Subventionen an umstellungswillige Landwirte. Diese Maßnahmen führten am Ende der 1990er Jahre für einige ökologische Produkte zu einem Überangebot auf europäischer Ebene. Die Verbrauchernachfrage stieg nicht in gleichem Maße wie das Angebot, und die Notwendigkeit für eine Verbesserung des Marktgleichgewichts wurde offensichtlich. Dieser Bedarf wurde im Jahr 2004 von der Europäischen Kommission im ersten „Europäischen Aktionsplan für ökologisch erzeugte Lebensmittel und den ökologischen Landbau“ formuliert. Als Voraussetzung für ein gleichmäßigeres Marktwachstum wird in diesem Aktionsplan die Schaffung eines transparenteren Marktes durch die Erhebung statistischer Daten über Produktion und Verbrauch ökologischer Produkte gefordert. Die Umsetzung dieses Aktionsplans ist jedoch bislang nicht befriedigend, da es auf EU-Ebene noch immer keine einheitliche Datenerfassung für den Öko-Sektor gibt. Ziel dieser Studie ist es, angemessene Methoden für die Erhebung, Verarbeitung und Analyse von Öko-Marktdaten zu finden. Geeignete Datenquellen werden identifiziert und es wird untersucht, wie die erhobenen Daten auf Plausibilität untersucht werden können. Hierzu wird ein umfangreicher Datensatz zum Öko-Markt analysiert, der im Rahmen des EU-Forschungsprojektes „Organic Marketing Initiatives and Rural Development” (OMIaRD) erhoben wurde und alle EU-15-Länder sowie Tschechien, Slowenien, Norwegen und die Schweiz abdeckt. Daten für folgende Öko-Produktgruppen werden untersucht: Getreide, Kartoffeln, Gemüse, Obst, Milch, Rindfleisch, Schaf- und Ziegenfleisch, Schweinefleisch, Geflügelfleisch und Eier. Ein zentraler Ansatz dieser Studie ist das Aufstellen von Öko-Versorgungsbilanzen, die einen zusammenfassenden Überblick von Angebot und Nachfrage der jeweiligen Produktgruppen liefern. Folgende Schlüsselvariablen werden untersucht: Öko-Produktion, Öko-Verkäufe, Öko-Verbrauch, Öko-Außenhandel, Öko-Erzeugerpreise und Öko-Verbraucherpreise. Zudem werden die Öko-Marktdaten in Relation zu den entsprechenden Zahlen für den Gesamtmarkt (öko plus konventionell) gesetzt, um die Bedeutung des Öko-Sektors auf Produkt- und Länderebene beurteilen zu können. Für die Datenerhebung werden Primär- und Sekundärforschung eingesetzt. Als Sekundärquellen werden Publikationen von Marktforschungsinstituten, Öko-Erzeugerverbänden und wissenschaftlichen Instituten ausgewertet. Empirische Daten zum Öko-Markt werden im Rahmen von umfangreichen Interviews mit Marktexperten in allen beteiligten Ländern erhoben. Die Daten werden mit Korrelations- und Regressionsanalysen untersucht, und es werden Hypothesen über vermutete Zusammenhänge zwischen Schlüsselvariablen des Öko-Marktes getestet. Die Datenbasis dieser Studie bezieht sich auf ein einzelnes Jahr und stellt damit einen Schnappschuss der Öko-Marktsituation der EU dar. Um die Marktakteure in die Lage zu versetzen, zukünftige Markttrends voraussagen zu können, wird der Aufbau eines EU-weiten Öko-Marktdaten-Erfassungssystems gefordert. Hierzu wird eine harmonisierte Datenerfassung in allen EU-Ländern gemäß einheitlicher Standards benötigt. Die Zusammenstellung der Marktdaten für den Öko-Sektor sollte kompatibel sein mit den Methoden und Variablen der bereits existierenden Eurostat-Datenbank für den gesamten Agrarmarkt (öko plus konventionell). Eine jährlich aktualisierte Öko-Markt-Datenbank würde die Transparenz des Öko-Marktes erhöhen und die zukünftige Entwicklung des Öko-Sektors erleichtern. ---------------------------
Resumo:
The objective of this paper is precisely to study the evolution of payment systems within the accession countries between 1996 and 2003 and compare them with those of the E.U. and the Eurozone countries
Resumo:
T??tulo, resumen y palabras clave tambi??n en espa??ol
Resumo:
This dissertation studies the effects of Information and Communication Technologies (ICT) on the banking sector and the payments system. It provides insight into how technology-induced changes occur, by exploring both the nature and scope of main technology innovations and evidencing their economic implications for banks and payment systems. Some parts in the dissertation are descriptive. They summarise the main technological developments in the field of finance and link them to economic policies. These parts are complemented with sections of the study that focus on assessing the extent of technology application to banking and payment activities. Finally, it includes also some work which borrows from the economic literature on banking. The need for an interdisciplinary approach arises from the complexity of the topic and the rapid path of change to which it is subject. The first chapter provides an overview of the influence of developments in ICT on the evolution of financial services and international capital flows. We include main indicators and discuss innovation in the financial sector, exchange rates and international capital flows. The chapter concludes with impact analysis and policy options regarding the international financial architecture, some monetary policy issues and the role of international institutions. The second chapter is a technology assessment study that focuses on the relationship between technology and money. The application of technology to payments systems is transforming the way we use money and, in some instances, is blurring the definition of what constitutes money. This chapter surveys the developments in electronic forms of payment and their relationship to the banking system. It also analyses the challenges posed by electronic money for regulators and policy makers, and in particular the opportunities created by two simultaneous processes: the Economic and Monetary Union and the increasing use of electronic payment instruments. The third chapter deals with the implications of developments in ICT on relationship banking. The financial intermediation literature explains relationship banking as a type of financial intermediation characterised by proprietary information and multiple interactions with customers. This form of banking is important for the financing of small and medium-sized enterprises. We discuss the effects of ICT on the banking sector as a whole and then apply these developments to the case of relationship banking. The fourth chapter is an empirical study of the effects of technology on the banking business, using a sample of data from the Spanish banking industry. The design of the study is based on some of the events described in the previous chapters, and also draws from the economic literature on banking. The study shows that developments in information management have differential effects on wholesale and retail banking activities. Finally, the last chapter is a technology assessment study on electronic payments systems in Spain and the European Union. It contains an analysis of existing payment systems and ongoing or planned initiatives in Spain. It forms part of a broader project comprising a series of country-specific analyses covering ten European countries. The main issues raised across the countries serve as the starting point to discuss implications of the development of electronic money for regulation and policies, and in particular, for monetary-policy making.
Resumo:
In this study we evaluate processing costs of different types of anaphoric expressions during reading. We consider three types of anaphoric expressions in Subject sentential position: a null pronoun (pro), and two gaps produced by syntactic movement: a WHvariable and a NP copy. Given that coreferential pro exhibits more referential weight than wh- and NP-gaps, and grounded on theories of referential processing based on relations of hierarchy and accessibility of the antecedent, we raise the hypothesis that the more dependent on its antecedent the anaphoric null constituent is, and the more minimal is the distance in terms of hierarchical structure between the anaphoric null element and its antecedent, the lower are the cognitive costs in processing. To test our hypothesis, we registered the eye movements with R6-HS ASL system of 20 Portuguese adult native speakers. Text regions including the selected anaphoric expressions were delimited and tagged. We analyzed the reading time of each region taking into account the number and duration of eye fixations per region; we used the reading time by character in milliseconds in order to compare values between regions of different length. We found a significant advantage in the reading time of the gaps arising from movement over the reading time of pro.
Resumo:
This paper discusses the creation of a European Banking Union. First, we discuss questions of design. We highlight seven fundamental choices that decision makers will need to make: Which EU countries should participate in the banking union? To which categories of banks should it apply? Which institution should be tasked with supervision? Which one should deal with resolution? How centralised should the deposit insurance system be? What kind of fiscal backing would be required? What governance framework and political institutions would be needed? In terms of geographical scope, we see the coverage of the banking union of the euro area as necessary and of additional countries as desirable, even though this would entail important additional economic difficulties. The system should ideally cover all banks within the countries included, in order to prevent major competitive and distributional distortions. Supervisory authority should be granted either to both the ECB and a new agency, or to a new agency alone. National supervisors, acting under the authority of the European supervisor, would be tasked with the supervision of smaller banks in accordance with the subsidiarity principle. A European resolution authority should be established, with the possibility of drawing on ESM resources. A fully centralized deposit insurance system would eventually be desirable, but a system of partial reinsurance may also be envisaged at least in a first phase. A banking union would require at least implicit European fiscal backing, with significant political authority and legitimacy. Thus, banking union cannot be considered entirely separately from fiscal union and political union. The most difficult challenge of creating a European banking union lies with the short-term steps towards its eventual implementation. Many banks in the euro area, and especially in the crisis countries, are currently under stress and the move towards banking union almost certainly has significant distributional implications. Yet it is precisely because banks are under such stress that early and concrete action is needed. An overarching principle for such action is to minimize the cost to the tax payers. The first step should be to create a European supervisor that will anchor the development of the future banking union. In parallel, a capability to quickly assess the true capital position of the system’s most important banks should be created, for which we suggest establishing a temporary European Banking Sector Task Force working together with the European supervisor and other authorities. Ideally, problems identified by this process should be resolved by national authorities; in case fiscal capacities would prove insufficient, the European level would take over in the country concerned with some national financial participation, or in an even less likely adverse scenario, in all participating countries at once. This approach would require the passing of emergency legislation in the concerned countries that would give the Task Force the required access to information and, if necessary, further intervention rights. Thus, the principle of fiscal responsibility of respective member states for legacy costs would be preserved to the maximum extent possible, and at the same time, market participants and the public would be reassured that adequate tools are in place to address any eventuality.