颅颌运动仿真系统(牙合)接触精度初探

目的 探讨颅颌运动仿真系统的骀接触模拟精度,为该仿真系统的应用提供依据.方法 制作10副石膏模型并上(牙合)架.用(牙合)架模拟侧方运动,三维扫描侧方运动终点(牙合)架上的上下颌模型,重建数字化上下颌模型作为对照组.运用仿真系统模拟耠架的侧方运动,以仿真系统输出的侧方运动终点的数字化上下颌模型为试验组.通过比较试验组与对照组下颌牙列之间的位置差异评价仿真系统的(牙合)接触模拟精度.结果 仿真系统模拟的下颌牙列与对照组下颌牙列之间的绝对平均距离为(0.18±0.05)mm;在前后左右四个分区中,两组右后牙区之间的绝对平均距离最大,为(0.19±0.07)mm.结论 该仿真系统的体外胎接触模拟精度为0.19mm.

Hydration of drug-DNA complexes: Greater water uptake for adriamycin compared to daunomycin

Water is an integral part of DNA, and the conserved water molecules at the binding sites can modulate drug binding to DNA or protein. We report here that anthracycline antitumor antibiotics, adriamycin (AM) and daunomycin (DM), binding to DNA is accompanied by different hydration changes, with AM binding resulting in the uptake of about twice as many water molecules as DM. These results indicate that water is playing an important role in drug binding to DNA.

Efficient Electrophosphorescence from a Platinum Metallopolyyne Featuring a 2,7-Carbazole Chromophore

The synthesis, thermal and emission properties of an electrophosphorescent platinum(II) metallopolyyne polymer consisting of 9-butylcarbazole-2,7-diyl spacer P1 are described. The optical and electronic properties of P1 are compared to their molecular diplatinum(II) and digold(I) model complexes. The photophysical properties of P1 are somehow analogous to its 2,7-fluorene-linked congener but differs significantly from that for the 3,6-carbazole derivative. Its optical band gap is notably reduced as compared to that for the 3,6-carbazole analog. Multi-layer polymer light-emitting diodes (PLEDs) were fabricated with P1 as the emitting layer which gave a strong green-yellow electrophosphorescence. The best PLED can reach the maximum current efficiency of 4.7 cd . A(-1) at 5 wt.-% doping level, corresponding to an external quantum efficiency of 1.5%. This represents the first literature example of efficient PLEDs exhibiting pure triplet emission under electrical excitation for metallopolyynes without the concomitant singlet emission.

Synthesis and properties of soluble polyimides based on isomeric ditrifluoromethyl substituted 1,4-bis(4-aminophenoxy)benzene

A new fluorinated diamine monomer, [1,4-bis(4-amino-3-trifluoromethylphenoxy)benzene (2)], and a known isomeric analog 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene (3) were synthesized. A series of organosoluble polyimides Ia-d and IIa were prepared from the diamines (2, 3) and dianhydrides (a-d) by a high-temperature one-step method. The effects of the trifluoromethyl substituents on the properties of polyimides were evaluated through the study of their soluble, thermal, optical, and gas permeability properties. Polyimides (Ia-d) had glass transition temperatures between 229 and 279 degrees C, and the temperatures at 5% weight loss ranged from 510 to 533 degrees C under nitrogen. These polyimides could be cast into flexible and tough membranes from DMAc solutions. The membranes had tensile strengths in the range of 137-169 MPa, tensile modulus in the range of 1.6-2.2 GPa and elongations at break from 11% to 14%. The polyimide la with trifluoromethyl groups ortho to the imide nitrogen exhibited enhanced gas permeability, solubility, transparency, and thermal stability compared with the isomeric polyimide IIa with the CF3 group meta to the imide nitrogen.

STUDIES ON INCREASING THE ACTIVITY OF SELENIUM-CONTAINING ABZYME .1. SYNTHESIS, CHARACTERIZATION AND PROPERTIES OF HAPTEN AND ANTIGEN

The thiol group of glutathione (GSH) reacts specifically with 2,4-di-ni-trochlorobenzene to give S-substituted dinitrophenyl glutathione (GSH-S-DNP); two carboxyl groups of GSH-S-DNP were further esterified by n-butanol to produce the hapten, multisubstrate analog GSH-S-DNP Butyl Ester (GSH-S-DNP BE). The primary structure of the hapten was characterized by the free. amino group analysis, H-1 NMR, IR determinations and the elemental analysis. The hapten was then conjugated to bovine serum albumin (BSA) in the presence of glutaraldehyde. The reaction mixture was purified by Ultrogel AcA54 colum chromatography to give the antigen. On an average, 25 haptens were bound to each BSA molecule. Electrophoresis analysis showed that the average molecular weight of the antigen was 87 KD. CD spectrum showed that the a-helix content of the antigen increased.

Heinrich event imprints in the Okinawa Trough: evidence from oxygen isotope and planktonic foraminifera

Planktonic foraminiferal faunas, oxygen isotope and modern analog technique sea surface temperature records were obtained in piston core DGKS9603 (28degrees08.869'N, 127degrees16.238'E, water depth 1100 in) collected from the middle Okinawa Trough. During the last glaciation, four cold events were identified and correlate Heinrich events (HE) H2-5 of the last 45 ka. During the last deglaciation, core DGKS9603 has begun to be influenced by the Kuroshio since about 16 cal ka BP. Three weakenings of this warm current occurred at about 2.8-5.3, 11.4 and 15.5 cal ka BP respectively. Among the three fluctuations, the oldest one is synchronous with HE1 and could be a response to the strong cooling observed in the North Atlantic Ocean. The fluctuation occurring at about 11.4 cal ka ago corresponds to the Younger Dryas within the age error bars. Our observations provide new evidence that the HEs documented from Greenland and the northern North Atlantic had a global climatic impact. Changes in the intensity of the East Asian monsoon could be the main mechanism responsible for the paleoccanographic variations observed in the Okinawa Trough. (C) 2001 Elsevier Science B.V. All rights reserved.

基于MAX5307和DSP的多回路测控系统设计

提出了一种多回路测控系统的设计方案。该方案仅使用一个DSP(数字信号处理器)及一个多通道集成的D/A转换器件MAX5307,不仅同时保证了多个测控回路的实时性及控制精度,而且实现简单,成本低廉。文中结合实际系统,给出了其具体的硬件和软件实现。该方法具有广泛的适用性,对类似系统的设计具有参考价值。

微型ROV控制装置及控制方法

介绍了一种基于嵌入式ARM9技术的微型ROV的控制装置及控制方法。该装置可以同时进行两通道串行通讯,实现微型ROV的视频信号、潜水深度、艏向角度、纵倾角度、横摇角度、电子舱温度等数据的采集和与上位机的通讯传输;该装置可以采集16路模拟量信号和12路数字量信号,输出4路模拟量信号和12路TTL电平信号,实现推进器、水下灯、水下摄像机、云台等ROV功能器件的驱动。该装置具有通讯能力强、集成度高、功耗低等特点,可以满足微型ROV所有的常用功能要求。

模拟量采用PWM方式传送的应用

本文介绍了一种利用 ＰＷＭ方式进行模拟量长线传送的应用，突出了它的结构简单、抗干扰能力强的优点。

多路温度测控系统的设计

目的利用单片机技术设计多路温度测控系统,实现多路温度的测量和控制.方法系统以单片机AT89C52为核心,利用多路转换器和新型数字器件MAX6675构成8路K型热电偶温度测量电路,利用D/A转换器AD7528和驱动电路构成输出电路,实现8路一一对应的闭环温度测量控制.系统软件采用PID控制器.结果实践证明,可根据需要增减系统温度信号采样通道的数目,使用软件抗干扰措施,提高了采样数据的可靠性.简化了输入输出硬件结构,使系统具有低成本高速度和较好的测量控制精度.结论多路温度测控系统作为整机适用于现场测量控制应用,也可作为多路温度控制模块应用在体积小、温度测量精度要求较高的大型系统中.

甘肃西峰黄土剖面500 ka以来的蜗牛化石记录及其古气候、古环境变化研究

The loess-paleosol sequences in China are among the best continental records of paleoclimate changes. Although numerous sedimentological and geochemical studies have contributed greatly to the understanding of past climate changes during this period, it is still necessary to decipher more details through investigating these sequences using various approaches including biological analyses. In this study, we analyze the mollusk fossil assemblages preserved in the upper part of the Xifeng section, from the fifth loess layer (L5) to the Holocene soil (S0), with the sampling interval of 10 cm. The main results and conclusions obtained are as follows: 1. A continuous terrestrial mollusk fossil record, covering the past 500 ka, has been obtained from the Xifeng loess-paleosol sequence, which provides important biological data for the study of paleoenvironmental changes in the Loess Plateau and its comparison with marine record during this period. A total of 475 mollusk assemblages were studied, and twenty-one species have been identified among the 210,000 mollusk individuals counted. Among these species, most have modern representatives and are found in previous terrestrial mollusk studies of Chinese loess-paleosol sequences. Thus, they can be grouped into cold-aridiphilous, thermo-humidiphilous, oriental, and cool-humidiphilous ecological groups, as defined by previous studies. 2. Comparison of mollusk assemblages between the last five glacials and four interglacials and Holocene shows very different climate conditions. The warmest period occurred at MIS 11, MIS 5e, and Holocene, respectively. The coldest period is the Last Glacial Maximam, rather than the MIS 12. 3. Our mollusk record provides insight into the climate conditions in the Loess Plateau during the MIS 11, interpreted as the closest analog to the present interglacial. S4 paleosol, equivalent of MIS 11, developed under two major different climate regimes: ranging from the very warm–humid early phase to the mild-cool late interval. Furthermore, a cooling spell has been documented at the interglacial optimum, reflecting unstable climate conditions. The early warm–humid conditions lasted over 30 ka, supporting that MIS 11 is a unique long interglacial in the Quaternary climate history. 4. Comparison of MIS 11 and Holocene climates based on the mollusk species compositions indicates major differences. The climate at the early part of MIS 11 was warmer and more humid than during the Holocene optimum period, but the conditions during the late part of MIS 11 were similar to or cooler than late Holocene. Our study indicates that the extent of warming during the Holocene might be significantly less than the conditions that prevailed during the early part of MIS 11 interglacial period. 5. Two strong summer monsoon events were observed during the MIS 12 and MIS 10. They correspond to the maximam values of insolation gradient between low and high latitudes, suggesting a causal linkage. 6. Our study, combined with the previously investigated Luochuan land snail record, reveals that the climate in the Loess Plateau during MIS 3 experienced three stages: relatively warm, humid climate prevailed during MIS 3c, relatively cold, dry climate during MIS 3b, and relatively warm-humid period during MIS 3a. Climate at this time fluctuated frequently in Luochuan, and changed from warm-cool to cold-dry in Xifeng. Our results reveal that the relatively warm-humid climate during MIS 3c may be resulted from an increasing insolation gradient controlled by obliquity. Our result also reveals that obvious regional difference existed in the Loess Plateau during MIS 3. A greater climate gradient occurred during this time compared with today’s climate pattern in the Loess Plateau.

宽频带地震数据采集系统的研制

The seismic data acquisition system is the most important equipment for seismic prospecting. The geophysicists have been paying high attention to the specification of the equipment used in seismic prospecting. Its specification and performance are of great concerned to acquire precisely and accurately seismic data, which show us stratum frame. But, by this time, limited by the technology, most of the Broad-band Seismic Recorder (BSR) for lithosphere research of our country were bought from fremdness which were very costliness and maintained discommodiously. So it is very important to study the seismic data acquisition system.The subject of the thesis is the research of the BSR, several items were included, such as: seismic data digitizer and its condition monitor design.In the first chapter, the author explained the significance of the implement of BSR, expatiated the requirement to the device and introduced the actuality of the BSR in our country.In the second chapter, the collectivity architecture of the BSR system was illustrated. Whereafter, the collectivity target and guideline of the performance of the system design were introduced. The difficulty of the system design and some key technology were analyzed, such as the Electro Magnetic Compatibility (EMC), system reliability technology and so on.In the third chapter, some design details of BSR were introduced. In the recorder, the former analog to digital converter (ADC) was separated from the later data transition module. According to the characteristic of seismic data acquisition system, a set high-resolution 24-bit ADC chip was chosen to the recorder design scheme. As the following part, the noise performance of the seismic data channel was analyzed.In the fourth chapter, the embedded software design of each board and the software design of the workstation were introduced. At the same time the communication protocol of the each module was recommendedAt the last part of this thesis, the advantages and the practicability of the BSR system design were summarized, and the next development items were suggested.

听觉想象的大脑表征

As a species of internal representation, how is mental imagery organized in the brain? There are two issues related to this question: the time course and the nature of mental imagery. On the nature of mental imagery, today's imagery debate is influenced by two opposing theories: (1) Pylyshyn’s propositional theory and (2) Kosslyn’s depictive representation theory. Behavioural studies indicated that imagery encodes properties of the physical world, such as the spacial and size information of the visual world. Neuroimaging and neuropsychological data indicated that sensory cortex; especially the primary sensory cortex, is involved in imagery. In visual modality, neuroimaging data further indicated that during visual imagery, spatial information is mapped in the primary visual, providing strong evidences for depictive theory. In the auditory modality, behavioural studies also indicated that auditory imagery represents loudness and pitch of sound; this kind of neuroimaging evidence, however, is absent. The aim of the present study was to investigate the time course of auditory imagery processing, and to provide the neuroimaging evidence that imaginal auditory representations encode loudness and pitch information, using the ERP method and a cue-imagery (S1)-S2 paradigm. The results revealed that imagery effects started with an enhancement of the P2, probably indexing the top-down allocation of attention to the imagery task; and continued into a more positive-going late positive potentials (LPC), probably reflecting the formation of auditory imagery. The amplitude of this LPC was inversely related to the pitch of the imagined sound, but directly related to the loudness of the imagined sound, which were consistent with auditory perception related N1 component, providing evidences that auditory imagery encodes pitch and loudness information. When the S2 showed difference in pitch of loudness from the previously imagined S1, the behavioral performance were significantly worse and accordingly a conflict related N2 was elicited; and the high conflict elicited greater N2 amplitude than low conflict condition, providing further evidences that imagery is analog of perception and can encode pitch and loudness information. The present study suggests that imagery starts with an mechanism of top-down allocation of attention to the imagery task; and continuing into the step of imagery formation during which the physical features of the imagined stimulus can be encoded, providing supports to Kosslyn’s depictive representation theory.

Parallel Networks for Machine Vision

The amount of computation required to solve many early vision problems is prodigious, and so it has long been thought that systems that operate in a reasonable amount of time will only become feasible when parallel systems become available. Such systems now exist in digital form, but most are large and expensive. These machines constitute an invaluable test-bed for the development of new algorithms, but they can probably not be scaled down rapidly in both physical size and cost, despite continued advances in semiconductor technology and machine architecture. Simple analog networks can perform interesting computations, as has been known for a long time. We have reached the point where it is feasible to experiment with implementation of these ideas in VLSI form, particularly if we focus on networks composed of locally interconnected passive elements, linear amplifiers, and simple nonlinear components. While there have been excursions into the development of ideas in this area since the very beginnings of work on machine vision, much work remains to be done. Progress will depend on careful attention to matching of the capabilities of simple networks to the needs of early vision. Note that this is not at all intended to be anything like a review of the field, but merely a collection of some ideas that seem to be interesting.

A Comparison of Hardware Implementations for Low-Level Vision Algorithms

Early and intermediate vision algorithms, such as smoothing and discontinuity detection, are often implemented on general-purpose serial, and more recently, parallel computers. Special-purpose hardware implementations of low-level vision algorithms may be needed to achieve real-time processing. This memo reviews and analyzes some hardware implementations of low-level vision algorithms. Two types of hardware implementations are considered: the digital signal processing chips of Ruetz (and Broderson) and the analog VLSI circuits of Carver Mead. The advantages and disadvantages of these two approaches for producing a general, real-time vision system are considered.