Diseño web con Drupal 7

En este documento se van a desarrollar las técnicas para la creación de páginas web utilizando uno de los sistemas de gestión de contenido, también llamado CMS, por sus siglas en inglés, Content Manager System, más potentes del mercado, y open source, es decir de código abierto, como es el caso de Drupal. Se usará este sistema de gestión en su versión 7, y la actualización 37, o lo que es lo mismo, se usará Drupal 7.37, aunque se actualizará a la versión 38, puesto que esta versión fue publicada a mitad de los desarrollos y la versión 8 todavía está en versión beta y no es suficientemente estable como para crear una página web robusta con esa versión del CMS. Estas explicaciones están basadas en dos páginas web creadas en dicho gestor de contenidos, una de ellas ya en producción, www.lrl.es, que también podrá ser accedida desde www.luqueagentescomerciales.es, página web diseñada para un agente comercial de herramientas. La segunda, todavía no está en producción pero se puede acceder a ella desde el servidor wamp montado en local, 81.37.0.251/epi, que es una mejora de la página www.elpactoinvisible.es, diseñada para una galería de arte de Málaga. A lo largo del documento se verán distintas opciones que se pueden llegar a utilizar gracias a Drupal para obtener el resultado esperado y se darán las explicaciones pertinentes para saber cuál de ellas usar para focalizar distintos aspectos según se decida ir por una vía u otra de desarrollo, y se mostraran, con código cuando sea necesario, las soluciones utilizadas en las distintas páginas, de las que se ha hablado en el párrafo precedente, y el porqué de usar esa solución en vez de otras alternativas que también son viables para dichos objetivos. ABSTRACT This paper will develop techniques for creating web pages using one of the systems content management, also called CMS, for its acronym in English, Content Manager System, and the most powerful in the market, and open source, as is the case of Drupal. This management system in its version 7, and updating 37, or as it is called, Drupal 7.37 is used, although it will be updated to version 38, because this version was published in the middle of the developments and version 8 is still in beta and is not stable enough to create a robust site with this version of CMS. These explanations are based on two websites created in this CMS, one of them already in production, www.lrl.es, which also can be accessed from www.luqueagentescomerciales.es, web page designed for a tools commercial agent. The second one, is not yet in production but can be accessed from the WAMP server installed locally, 81.37.0.251/epi, which is an improvement to www.elpactoinvisible.es page, designed for an art gallery in Malaga. Throughout the document you can get several options to be used thanks to Drupal in order to achieve result and explanations will be given to indicate one of theme to use for targeting different aspects and which developing method or path to follow and will be shown, in code if it should be necessary, the solutions used in different pages which have been discussed in the preceding paragraph, and why to use that solution instead of other alternatives are also viable for such purposes.

A web recommendation technique based on probabilistic latent semantic analysis

Web transaction data between Web visitors and Web functionalities usually convey user task-oriented behavior pattern. Mining such type of click-stream data will lead to capture usage pattern information. Nowadays Web usage mining technique has become one of most widely used methods for Web recommendation, which customizes Web content to user-preferred style. Traditional techniques of Web usage mining, such as Web user session or Web page clustering, association rule and frequent navigational path mining can only discover usage pattern explicitly. They, however, cannot reveal the underlying navigational activities and identify the latent relationships that are associated with the patterns among Web users as well as Web pages. In this work, we propose a Web recommendation framework incorporating Web usage mining technique based on Probabilistic Latent Semantic Analysis (PLSA) model. The main advantages of this method are, not only to discover usage-based access pattern, but also to reveal the underlying latent factor as well. With the discovered user access pattern, we then present user more interested content via collaborative recommendation. To validate the effectiveness of proposed approach, we conduct experiments on real world datasets and make comparisons with some existing traditional techniques. The preliminary experimental results demonstrate the usability of the proposed approach.

Feature LDA:a supervised topic model for automatic detection of web API documentations from the web

Web APIs have gained increasing popularity in recent Web service technology development owing to its simplicity of technology stack and the proliferation of mashups. However, efficiently discovering Web APIs and the relevant documentations on the Web is still a challenging task even with the best resources available on the Web. In this paper we cast the problem of detecting the Web API documentations as a text classification problem of classifying a given Web page as Web API associated or not. We propose a supervised generative topic model called feature latent Dirichlet allocation (feaLDA) which offers a generic probabilistic framework for automatic detection of Web APIs. feaLDA not only captures the correspondence between data and the associated class labels, but also provides a mechanism for incorporating side information such as labelled features automatically learned from data that can effectively help improving classification performance. Extensive experiments on our Web APIs documentation dataset shows that the feaLDA model outperforms three strong supervised baselines including naive Bayes, support vector machines, and the maximum entropy model, by over 3% in classification accuracy. In addition, feaLDA also gives superior performance when compared against other existing supervised topic models.

Extending Object-Oriented Network Protocols via alternative Transportation Bindings (Web Services over XMPP)

Distributed and/or composite web applications are driven by intercommunication via web services, which employ application-level protocols, such as SOAP. However, these protocols usually rely on the classic HTTP for transportation. HTTP is quite efficient for what it does — delivering web page content, but has never been intended to carry complex web service oriented communication. Today there exist modern protocols that are much better fit for the job. Such a candidate is XMPP. It is an XML-based, asynchronous, open protocol that has built-in security and authentication mechanisms and utilizes a network of federated servers. Sophisticated asynchronous multi-party communication patterns can be established, effectively aiding web service developers. This paper’s purpose is to prove by facts, comparisons, and practical examples that XMPP is not only better suited than HTTP to serve as middleware for web service protocols, but can also contribute to the overall development state of web services.

Systematic review of Late Jurassic sauropods from the Museu Geológico collections (Lisboa, Portugal)

The Museu Geológico collections house some of the first sauropod references of the Lusitanian Basin Upper Jurassic record, including the Lourinhasaurus alenquerensis and Lusotitan atalaiensis lectotypes, previously considered as new species of the Apatosaurus and Brachiosaurus genera, respectively. Several fragmentary specimens have been classical referred to those taxa, but the most part of these systematic attributions are not supported herein, excluding a caudal vertebra from Maceira (MG 8804) considered as cf. Lusotitan atalaiensis. From the material housed in the Museu Geológico were identified basal eusauropods (indeterminate eusauropods and turiasaurs) and neosauropods (indeterminate neosauropods, diplodods and camarasaurids and basal titanosauriforms). Middle caudal vertebrae with lateral fossae, ventral hollow border by pronounced ventrolateral crests and quadrangular cross-section suggest for the presence of diplodocine diplodocids in north area of the Lusitanian Basin Central Sector during the Late Jurassic. A humerus collected from Praia dos Frades (MG 4976) is attributed to cf. Duriatitan humerocristatus suggesting the presence of shared sauropod forms between the Portugal and United Kingdom during the Late Jurassic. Duriatitan is an indeterminate member of Eusauropoda and the discovery of new material in both territories is necessary to confirm this systematic approach. The studied material is in according with the previous recorded paleobiodiversity for the sauropod clade during the Portuguese Late Jurassic, which includes basal eusauropods (including turiasaurs), diplodocids and macronarians (including camarasaurids and basal titanosauriforms).

Mejorando la visibilidad de sitios web usando tecnología semántica

La visibilidad de una página Web involucra el proceso de mejora de la posición del sitio en los resultados devueltos por motores de búsqueda como Google. Hay muchas empresas que compiten agresivamente para conseguir la primera posición en los motores de búsqueda más populares. Como regla general, los sitios que aparecen más arriba en los resultados suelen obtener más tráfico a sus páginas, y de esta forma, potencialmente más negocios. En este artículo se describe los principales modelos para enriquecer los resultados de las búsquedas con información tales como fechas o localidades; información de tipo clave-valor que permite al usuario interactuar con el contenido de una página Web directamente desde el sitio de resultados de la búsqueda. El aporte fundamental del artículo es mostrar la utilidad de diferentes formatos de marcado para enriquecer fragmentos de una página Web con el fin de ayudar a las empresas que están planeando implementar métodos de enriquecimiento semánticos en la estructuración de sus sitios Web.

Creación y diseño de la plataforma web y aplicación móvil para la realización de la revista digital de carácter académico-estudiantil (ARKHÉ).

El proyecto titulado Creación y diseño de la plataforma web y aplicación móvil para la realización de la revista digital de carácter académico-estudiantil (Arkhé), tuvo como objetivo instaurar un medio propio para la Carrera de Comunicación Social, destinado a la publicación de trabajos e investigaciones de docentes y estudiantes. El proyecto fue estructurado visual y conceptualmente. En cuanto a la estructura visual, se crearon elementos que identifican a la revista, como: logotipo, colores y todo lo relacionado al diseño visual y funcional de la página y su aplicación móvil. En lo referente a la parte conceptual, se elaboraron las bases fundamentales para que exista una revista como: misión, visión, sostenibilidad, concepto de su nombre, creación de la línea editorial, Consejo Editorial, políticas de calidad y normas de publicación; para convertir a Arkhé en una fuente de referencia confiable con posibilidades de indexación. El presente proyecto comprende una investigación teórica y práctica. En el primer capítulo se partió de un marco teórico y se desarrollaron conceptos indispensables para la elaboración de una revista digital. En el segundo se mostró los resultados de la aplicación de encuestas y entrevistas realizadas a estudiantes y profesores. En el tercero se elaboraron las bases de la revista académica y de la estudiantil. Finalmente en el cuarto capítulo se creó el espacio web en donde consta toda la información de la revista para que puedan publicar sus trabajos. En consecuencia, Arkhé es un medio que apoya al proceso de aprendizaje, en el que profesores y estudiantes desarrollan sus habilidades a través de la práctica.

meso-Porphyrinylphosphine Oxides: Mono- and Bidentate Ligands for Supramolecular Chemistry and the Crystal Structures of Monomeric [10,20-Diphenylporphyrinatonickel(II)-5,15-diyl]-bis-[P(O)Ph2] and Polymeric Self-Coordinated ([10,20-Diphenylporphyrinatozinc(II)-5,15-diyl]-bis-[P(O)Ph2])

A series of porphyrins substituted in one or two meso-positions by diphenylphosphine oxide groups has been prepared by the palladium catalysed reaction of diphenylphosphine or its oxide with the corresponding bromoporphyrins. Compounds {MDPP-[P(O)Ph2]n} (M = H2, Ni, Zn; H2DPP = 5,15-diphenylporphyrin; n = 1, 2) were isolated in yields of 60-95%. The reaction is believed to proceed via the conventional oxidative addition, phosphination and reductive elimination steps, as the stoichiometric reaction of η1-palladio(II) porphyrin [PdBr(H2DPP)(dppe)] (H2DPP = 5,15-diphenylporphyrin; dppe = 1,2-bis(diphenylphosphino)ethane) with diphenylphosphine oxide also results in the desired mono-porphyrinylphosphine oxide [H2DPP-P(O)Ph2]. Attempts to isolate the tertiary phosphines failed due to their extreme air-sensitivity. Variable temperature 1H NMR studies of [H2DPP-P(O)Ph2] revealed an intrinsic lack of symmetry, while fluorescence spectroscopy showed that the phosphine oxide group does not behave as a "heavy atom" quencher. The electron withdrawing effect of the phosphine oxide group was confirmed by voltammetry. The ligands were characterised by multinuclear NMR and UV-visible spectroscopy as well as mass spectrometry. Single crystal X-ray crystallography showed that the bis(phosphine oxide) nickel(II) complex {[NiDPP-[P(O)Ph2]2} is monomeric in the solid state, with a ruffled porphyrin core and the two P=O fragments on the same side of the average plane of the molecule. On the other hand, the corresponding zinc(II) complex formed infinite chains through coordination of one Ph2PO substituent to the neighbouring zinc porphyrin through an almost linear P=O---Zn unit, leaving the other Ph2PO group facing into a parallel channel filled with disordered water molecules. These new phosphine oxides are attractive ligands for supramolecular porphyrin chemistry.

Integrated Acquisition Engineering Model for acquiring heavy engineering assets

In asset intensive industries such as mining, oil & gas, utilities etc. most of the capital expenditure happens on acquiring engineering assets. Process of acquiring assets is called as “Procurement” or “Acquisition”. An asset procurement decision should be taken in consideration with the installation, commissioning, operational, maintenance and disposal needs of an asset or spare. However, such cross-functional collaboration and communication does not appear to happen between engineering, maintenance, warehousing and procurement functions in many asset intensive industries. Acquisition planning and execution are two distinct parts of asset acquisition process. Acquisition planning or procurement planning is responsible for determining exactly what is required to be purchased. It is important that an asset acquisition decision is the result of cross-functional decision making process. An acquisition decision leads to a formal purchase order. Most costly asset decisions occur even before they are acquired. Therefore, acquisition decision should be an outcome of an integrated planning & decision making process. Asset intensive organizations both, Government and non Government in Australia spent AUD 102.5 Billion on asset acquisition in year 2008-09. There is widespread evidence of many assets and spare not being used or utilized and in the end are written off. This clearly shows that many organizations end up buying assets or spares which were not required or non-conforming to the needs of user functions. It is due the fact that strategic and software driven procurement process do not consider all the requirements from various functions within the organization which contribute to the operation and maintenance of the asset over its life cycle. There is a lot of research done on how to implement an effective procurement process. There are numerous software solutions available for executing a procurement process. However, not much research is done on how to arrive at a cross functional procurement planning process. It is also important to link procurement planning process to procurement execution process. This research will discuss ““Acquisition Engineering Model” (AEM) framework, which aims at assisting acquisition decision making based on various criteria to satisfy cross-functional organizational requirements. Acquisition Engineering Model (AEM) will consider inputs from corporate asset management strategy, production management, maintenance management, warehousing, finance and HSE. Therefore, it is essential that the multi-criteria driven acquisition planning process is carried out and its output is fed to the asset acquisition (procurement execution) process. An effective procurement decision making framework to perform acquisition planning which considers various functional criteria will be discussed in this paper.

Occupational health nurses’ roles, credentials, and continuing education in Ontario, Canada

The role of the occupational health nurse is broad and includes health care provider, manager/coordinator, educator/advisor, and case manager and consultant, depending on the type of industry and the country in which the nurse practices. Regardless of the type of role, the occupational health nurse must participate in continuing nursing education (CNE) activities. This study describes the roles, credentials, and number of CNE activities undertaken by occupational health nurses working in Ontario, Canada. Using a non-experimental descriptive design, a questionnaire was mailed to all practicing occupational health nurses who are members (n = 900) of a local nursing association. Three hundred fifty-four questionnaires were returned. Nurses reported a variety of roles in the following categories: case management, health promotion, policy development, infection control/travel health, ergonomics, education, research, health and safety, direct care, consultation, disaster preparedness, and industrial hygiene. Sixty-five percent of nurses held an occupational health nurse credential, and 19% of nurses attended more than 100 hours of CNE annually. Occupational health nurses have multiple workplace roles. Many attend CNE activities and they often prepare for credentialing.

Planning volunteer responses to low-volume mass gatherings: do event characteristics predict patient workload?

INTRODUCTION: Workforce planning for first aid and medical coverage of mass gatherings is hampered by limited research. In particular, the characteristics and likely presentation patterns of low-volume mass gatherings of between several hundred to several thousand people are poorly described in the existing literature. OBJECTIVES: This study was conducted to: 1. Describe key patient and event characteristics of medical presentations at a series of mass gatherings, including events smaller than those previously described in the literature; 2. Determine whether event type and event size affect the mean number of patients presenting for treatment per event, and specifically, whether the 1:2,000 deployment rule used by St John Ambulance Australia is appropriate; and 3. Identify factors that are predictive of injury at mass gatherings. METHODS: A retrospective, observational, case-series design was used to examine all cases treated by two Divisions of St John Ambulance (Queensland) in the greater metropolitan Brisbane region over a three-year period (01 January 2002-31 December 2004). Data were obtained from routinely collected patient treatment forms completed by St John officers at the time of treatment. Event-related data (e.g., weather, event size) were obtained from event forms designed for this study. Outcome measures include: total and average number of patient presentations for each event; event type; and event size category. Descriptive analyses were conducted using chi-square tests, and mean presentations per event and event type were investigated using Kruskal-Wallis tests. Logistic regression analyses were used to identify variables independently associated with injury presentation (compared with non-injury presentations). RESULTS: Over the three-year study period, St John Ambulance officers treated 705 patients over 156 separate events. The mean number of patients who presented with any medical condition at small events (less than or equal to 2,000 attendees) did not differ significantly from that of large (>2,000 attendees) events (4.44 vs. 4.67, F = 0.72, df = 1, 154, p = 0.79). Logistic regression analyses indicated that presentation with an injury compared with non-injury was independently associated with male gender, winter season, and sporting events, even after adjusting for relevant variables. CONCLUSIONS: In this study of low-volume mass gatherings, a similar number of patients sought medical treatment at small (<2,000 patrons) and large (>2,000 patrons) events. This demonstrates that for low-volume mass gatherings, planning based solely on anticipated event size may be flawed, and could lead to inappropriate levels of first-aid coverage. This study also highlights the importance of considering other factors, such as event type and patient characteristics, when determining appropriate first-aid resourcing for low-volume events. Additionally, identification of factors predictive of injury presentations at mass gatherings has the potential to significantly enhance the ability of event coordinators to plan effective prevention strategies and response capability for these events.

Interactive product browsing and configuration using remote augmented reality sales services

Real-time remote sales assistance is an underdeveloped component of online sales services. Solutions involving web page text chat, telephony and video support prove problematic when seeking to remotely guide customers in their sales processes, especially with configurations of physically complex artefacts. Recently, there has been great interest in the application of virtual worlds and augmented reality to create synthetic environments for remote sales of physical artefacts. However, there is a lack of analysis and development of appropriate software services to support these processes. We extend our previous work with the detailed design of configuration context services to support the management of an interactive sales session using augmented reality. We detail the context and configuration services required, presenting a novel data service streaming configuration information to the vendor for business analytics. We expect that a fully implemented configuration management service, based on our design, will improve the remote sales experience for both customers and vendors alike via analysis of the streamed information.

Multimedia copyright protection

Internet and its widespread usage for multimedia document distribution put the copyright issue in a complete new setting. Multimedia documents, specifically those installed on a web page, are no longer passive as they typically include active applets. Copyright protection safeguards the intellectual property (IP) of multimedia documents, which are either sold or distributed free of charge. In this Chapter, the basic tools for copyright protection are discussed. First, general concepts and the vocabulary used in copyright protection of multimedia documents are discussed. Later, taxonomy of watermarking and fingerprinting techniques are studied. This part is concluded by a review of the literature dealing with IP security. The main part of the chapter discusses the generic watermarking scheme and illustrates it on three specific examples: collusion-free watermarking, spread spectrum watermarking, and software fingerprinting. Future trends and conclusions close the chapter.

Resampling-based approaches to study variation in morphological modularity

Modularity has been suggested to be connected to evolvability because a higher degree of independence among parts allows them to evolve as separate units. Recently, the Escoufier RV coefficient has been proposed as a measure of the degree of integration between modules in multivariate morphometric datasets. However, it has been shown, using randomly simulated datasets, that the value of the RV coefficient depends on sample size. Also, so far there is no statistical test for the difference in the RV coefficient between a priori defined groups of observations. Here, we (1), using a rarefaction analysis, show that the value of the RV coefficient depends on sample size also in real geometric morphometric datasets; (2) propose a permutation procedure to test for the difference in the RV coefficient between a priori defined groups of observations; (3) show, through simulations, that such a permutation procedure has an appropriate Type I error; (4) suggest that a rarefaction procedure could be used to obtain sample-size-corrected values of the RV coefficient; and (5) propose a nearest-neighbor procedure that could be used when studying the variation of modularity in geographic space. The approaches outlined here, readily extendable to non-morphometric datasets, allow study of the variation in the degree of integration between a priori defined modules. A Java application – that will allow performance of the proposed test using a software with graphical user interface – has also been developed and is available at the Morphometrics at Stony Brook Web page (http://life.bio.sunysb.edu/morph/).