SiO2/Ta interface reaction in magnetic multilayers and its influence on Ta buffer layers

Ta is often used as a buffer layer in magnetic multilayers. In this study, Ta/Ni81Fe19/Ta multilayers were deposited by magnetron sputtering on sing-crystal Si with a 300-nm-thick SiO2 film. The composition and chemical states at the interface region of SiO2/Ta were studied using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique. The results show that there is an 'inter-mixing layer" at the SiO2/Ta interface due to a thermodynamically favorable reaction: 15 SiO2 + 37 Ta = 6 Ta2O5 + 5 Ta5Si3. Therefore, the Ta buffer layer thickness used to induce NiFe (111) texture increases.

Determination of oxidation states in magnetic multilayers

X-ray photoelectron spectroscopy has been used to characterize the oxidation states in Ta/NiOx/Ni-81/Fe-19/Ta magnetic multilayers prepared by rf reaction and dc magnetron sputtering. The exchange coupling field and the coercivity of NiOx/Ni81Fe19 are studied as a function of the ratio of Ar to O-2 during the deposition process. The chemical states of Ni atoms in the interface region of NiOx/NiFe have also been investigated by x-ray photoelectron spectroscopy and the peak decomposition technique. The results show that the ratio of Ar to O-2 has a great effect on the chemical states of nickel in NiOx films. Thus the exchange coupling field and the coercivity of Ta/NiOx/Ni81Fe19/Ta are seriously affected. Also, the experiment shows that x-ray photoelectron spectroscopy is a powerful tool in characterizing magnetic multilayers.

Magnetic property and interface structure of Ta/NiO/NiFe/Ta

Ta/NiO/NiFe/Ta multilayers, utilizing Ta as buffer layer, were prepared by rf reactive and de magnetron sputtering. The exchange coupling field between NiO and NiFe reached a maximum value of 9.6x10(3) A/m at a NiO film thickness of 50 nm. The composition and chemical states at interface region of Ta/NiO/Ta were studied by using the X-ray photoelectron spectroscopy (XPS) and peak decomposition technique. The results show that there is an "intermixing layer" at the Ta/NiO land NiO/Ta) interface due to a thermodynamically favorable reaction 2Ta + 5NiO = 5Ni + Ta2O5. This interface reaction has a great effect on exchange coupling. The thickness of Ni+NiO estimated by XPS depth. profiles is about 8-10 nm.

转子系统油膜振荡的小波包分解与频带能量比例特征分析

在介绍小波包分解原理的基础上 ,对试验测得的单盘单跨转子系统的油膜振荡非平稳信号用小波包分解方法进行了研究。采用db44小波基函数进行 4层小波包分解。给出了各频带内分解信号的特点及频带能量比例 ,其中第 3频带是该转子系统在 960 0r/min时产生油膜振荡的特征频带。得到的试验数据及其分析结果对转子系统油膜振荡研究和旋转机械状态监测等具有重要意义。

柴达木盆地地震勘探关键技术研究

The rugged surface topography determined the seismic data acquisition construction conditions and the seismic wave explosive and receiver quality in Qaidam Basin. This dissertation systematically researched the seismic acquisition, imaging process and the attribute analysis techniques of complicated oil and gas reservoir. The main research achievements and cognitions are as follows: 1. Through the stimulation effects research and analysis from the aspect of lithologic water-containing differences, it’s specific that stable hydrous sand layer can effectively enhance the stimulation effects combined with the corresponding field tests. The seismic data S/N ratio has been improved due to the combination explosive stimulation. Through the fold number and maximum offset analyses of target horizon, the complicated geometry has been optimized and the S/N ratio of seismic data has been improved, which made an important basis for improvement of 3D seismic data. 2. It has been proved that the first arrival refraction static correction method under the model constraint of fine surface survey is suitable to the Qaidam Basin of western areas by the real seismic data processing. Although the refraction horizon of near surface has some changes in a certain extent, it’s steady basically. The refraction horizon can be continuously traced in sections, so it’s qualified for the refraction static correction method on the whole. 3. The research is based on the curved-ray pre-stack time migration techniques of rough topography, and improved the imaging precision of complex areas. This techniques adopted the constant and variable velocity scanning mode and enhanced the velocity analysis precision. The 3D pre-stack time migration techniques reasonably solved the imaging and velocity multiple solutions problems of steep-dip faults and the intersections of horizontal layers. What’s more, fine velocity analysis and mute are very important to enhance the imaging precision of the seismic data in complicated Wunan areas. 4. The 3D seismic data edge-preserving processing methods have been realized due to the image process techniques. Because this method uses the large range filter, it can attenuate the noise maximally. The faults, break points, lithologic pinchout points and lithologic body of small scale such as river will not be influenced by blur because of the edge-preserving characterization of the method which is really an effective assistant technique of low S/N ratio seismic data attribute analysis. 5. The use of spectral decomposition technique can effectively identify the reservoirs. The special geology body which will not be identified (or without obvious characters) in the seismic profile may be found through the details changes of different frequencies in the amplitude profiles.

基于匹配追踪方法的地震信号时频分析研究

Seismic signal is a typical non-stationary signal, whose frequency is continuously changing with time and is determined by the bandwidth of seismic source and the absorption characteristic of the media underground. The most interesting target of seismic signal’s processing and explaining is to know about the local frequency’s abrupt changing with the time, since this kind of abrupt changing is indicating the changing of the physical attributes of the media underground. As to the seismic signal’s instantaneous attributes taken from time-frequency domain, the key target is to search a effective, non-negative and fast algorithm time-frequency distribution, and transform the seismic signal into this time-frequency domain to get its instantaneous power spectrum density, and then use the process of weighted adding and average etc. to get the instantaneous attributes of seismic signal. Time-frequency analysis as a powerful tool to deal with time variant non-stationary signal is becoming a hot researching spot of modern signal processing, and also is an important method to make seismic signal’s attributes analysis. This kind of method provides joint distribution message about time domain and frequency domain, and it clearly plots the correlation of signal’s frequency changing with the time. The spectrum decomposition technique makes seismic signal’s resolving rate reach its theoretical level, and by the method of all frequency scanning and imaging the three dimensional seismic data in frequency domain, it improves and promotes the resolving abilities of seismic signal vs. geological abnormal objects. Matching pursuits method is an important way to realize signal’s self-adaptive decomposition. Its main thought is that any signal can be expressed by a series of time-frequency atoms’ linear composition. By decomposition the signal within an over completed library, the time-frequency atoms which stand for the signal itself are selected neatly and self-adaptively according to the signal’s characteristics. This method has excellent sparse decomposition characteristics, and is widely used in signal de-noising, signal coding and pattern recognizing processing and is also adaptive to seismic signal’s decomposition and attributes analysis. This paper takes matching pursuits method as the key research object. As introducing the principle and implementation techniques of matching pursuits method systematically, it researches deeply the pivotal problems of atom type’s selection, the atom dictionary’s discrete, and the most matching atom’s searching algorithm, and at the same time, applying this matching pursuits method into seismic signal’s processing by picking-up correlative instantaneous messages from time-frequency analysis and spectrum decomposition to the seismic signal. Based on the research of the theory and its correlative model examination of the adaptively signal decomposition with matching pursuit method, this paper proposes a fast optimal matching time-frequency atom’s searching algorithm aimed at seismic signal’s decomposition by frequency-dominated pursuit method and this makes the MP method pertinence to seismic signal’s processing. Upon the research of optimal Gabor atom’s fast searching and matching algorithm, this paper proposes global optimal searching method using Simulated Annealing Algorithm, Genetic Algorithm and composed Simulated Annealing and Genetic Algorithm, so as to provide another way to implement fast matching pursuit method. At the same time, aimed at the characteristics of seismic signal, this paper proposes a fast matching atom’s searching algorithm by means of designating the max energy points of complex seismic signal, searching for the most optimal atom in the neighbor area of these points according to its instantaneous frequency and instantaneous phase, and this promotes the calculating efficiency of seismic signal’s matching pursuit algorithm. According to these methods proposed above, this paper implements them by programmed calculation, compares them with some open algorithm and proves this paper’s conclusions. It also testifies the active results of various methods by the processing of actual signals. The problems need to be solved further and the aftertime researching targets are as follows: continuously seeking for more efficient fast matching pursuit algorithm and expanding its application range, and also study the actual usage of matching pursuit method.

Análisis de las condiciones laborales en las entidades de la economía social en España desde una perspectiva de género

Las empresas de economía social comparten unos valores que motivan un comportamiento diferente de éstas en relación con la composición de sus plantillas, las condiciones de trabajo, su especialización productiva y su ubicación geográfica frente a las empresas ordinarias (sociedades anónimas y laborales) que no son de economía social. Este comportamiento diferencial constituye, a su vez, una importante aportación a la cohesión social y, de forma específica, desde el punto de vista de género, proporciona una mejora de la presencia y posición de las mujeres en el ámbito laboral. El objetivo principal de esta investigación es evaluar la existencia de elementos diferenciales entre las empresas de economía social y las ordinarias en cuanto a la igualdad de oportunidades, condiciones y trayectorias laborales desde una perspectiva de género, centrando el estudio en el caso de España. A partir de la Muestra Continua de Vidas Laborales (2010) se identifican dos grupos de empresas, de economía social (grupo objetivo) y de economía "no social" u ordinaria (grupo de control) equivalentes en cuanto a tamaño y sector de actividad. Para cada grupo y sus respectivos/as trabajadores/as, se realizan contrastes paramétricos y no paramétricos de diferencias de medias entre mujeres y hombres en relación a diferentes características laborales como el tipo de jornada, la duración del contrato o la estabilidad en la trayectoria laboral en la empresa. Además, se lleva a cabo una estimación de la discriminación salarial en ambos grupos siguiendo el modelo Oaxaca-Blinder. Los resultados muestran que las empresas de economía social ofrecen mejores condiciones en el acceso y la permanencia en el puesto laboral a las mujeres, una mayor estabilidad laboral y menor discriminación salarial frente a los hombres.

Discrete Conditional Phase-type Model Utilising a Multiclass Support Vector Machine for the Prediction of Retinopathy of Prematurity

Retinopathy of prematurity (ROP) is a rare disease in which retinal blood vessels of premature infants fail to develop normally, and is one of the major causes of childhood blindness throughout the world. The Discrete Conditional Phase-type (DC-Ph) model consists of two components, the conditional component measuring the inter-relationships between covariates and the survival component which models the survival distribution using a Coxian phase-type distribution. This paper expands the DC-Ph models by introducing a support vector machine (SVM), in the role of the conditional component. The SVM is capable of classifying multiple outcomes and is used to identify the infant's risk of developing ROP. Class imbalance makes predicting rare events difficult. A new class decomposition technique, which deals with the problem of multiclass imbalance, is introduced. Based on the SVM classification, the length of stay in the neonatal ward is modelled using a 5, 8 or 9 phase Coxian distribution.

Modèles et méthodes pour la planification de la récolte forestière

Ce projet de recherche a été réalisé avec la collaboration de FPInnovations. Une part des travaux concernant le problème de récolte chilien a été effectuée à l'Instituto Sistemas Complejos de Ingeniería (ISCI) à Santiago (Chili).

An Improved Design of Combinational Digital Circuits with Multiplexers using Genetic Algorithm

This paper presents a new approach to the design of combinational digital circuits with multiplexers using Evolutionary techniques. Genetic Algorithm (GA) is used as the optimization tool. Several circuits are synthesized with this method and compared with two design techniques such as standard implementation of logic functions using multiplexers and implementation using Shannon’s decomposition technique using GA. With the proposed method complexity of the circuit and the associated delay can be reduced significantly

Profundización, apertura y cierre de mercados de exportación a nivel sectorial en Colombia : una estimación de los márgenes del comercio y su relación con el ciclo económico

En este trabajo se explora, desde el punto de vista empírico, el comportamiento de la profundización, apertura y cierre de mercados de exportación a nivel sectorial para Colombia durante el periodo 1997- 2010, con énfasis en los dos periodos de recesión que presenta la economía durante el mismo. Para ello se emplea una metodología de descomposición de los cambios registrados por el comercio, en sus márgenes intensivo y extensivo, que permite la identificación de estos fenómenos y su observación tanto a lo largo del tiempo como a nivel transversal. Los resultados indican que, en el corto plazo, el margen intensivo del comercio explica la mayor parte de las variaciones en las exportaciones, en tanto que en el mediano plazo se encuentra una importante contribución del margen extensivo a éstas. Adicionalmente, desde el punto de vista sectorial, la crisis de 1997-1999 no presenta un patrón homogéneo en términos del comportamiento de los márgenes del comercio, en tanto que la de 2008- 2009 se caracteriza por presentar un patrón más homogéneo a través de los distintos sectores de la actividad económica.

Aircraft-based observations of air–sea turbulent fluxes around the British Isles

Observations of turbulent fluxes of momentum, heat and moisture from low-level aircraft data are presented. Fluxes are calculated using the eddy covariance technique from flight legs typically ∼40 m above the sea surface. Over 400 runs of 2 min (∼12 km) from 26 flights are evaluated. Flight legs are mainly from around the British Isles although a small number are from around Iceland and Norway. Sea-surface temperature (SST) observations from two on-board sensors (the ARIES interferometer and a Heimann radiometer) and a satellite-based analysis (OSTIA) are used to determine an improved SST estimate. Most of the observations are from moderate to strong wind speed conditions, the latter being a regime short of validation data for the bulk flux algorithms that are necessary for numerical weather prediction and climate models. Observations from both statically stable and unstable atmospheric boundary-layer conditions are presented. There is a particular focus on several flights made as part of the DIAMET (Diabatic influence on mesoscale structures in extratropical storms) project. Observed neutral exchange coefficients are in the same range as previous studies, although higher for the momentum coefficient, and are broadly consistent with the COARE 3.0 bulk flux algorithm, as well as the surface exchange schemes used in the ECMWF and Met Office models. Examining the results as a function of aircraft heading shows higher fluxes and exchange coefficients in the across-wind direction, compared to along-wind (although this comparison is limited by the relatively small number of along-wind legs). A multi-resolution spectral decomposition technique demonstrates a lengthening of spatial scales in along-wind variances in along-wind legs, implying the boundary-layer eddies are elongated in the along-wind direction. The along-wind runs may not be able to adequately capture the full range of turbulent exchange that is occurring because elongation places the largest eddies outside of the run length.

Discriminação salarial por cor e gênero revisitada: uma abordagem de decomposição contrafactual utilizando regressões quantílicas

A desigualdade salarial, especialmente a resultante da discriminação contra negros e mulheres no mercado de trabalho, é um componente importante da elevada concentração de renda da economia brasileira. Ao contrário da grande maioria dos trabalhos já desenvolvidos nesta área, este trabalho não adota a hipótese de que os efeitos de atributos determinantes do salário são constantes e idênticos para os indivíduos ao longo da distribuição de renda. São estimadas as estruturas salariais para cada percentil da distribuição salarial para homens brancos, homens negros, mulheres brancas e mulheres negras utilizando a técnica de decomposição contrafactual por regressões quantílicas, proposta por Koenker e Bassett (1978) e desenvolvida por Machado e Mata (2004). Isto proporciona uma compreensão mais detalhada e abrangente dos fatores que determinam a remuneração do trabalho para diferentes níveis de renda e fornece uma medida mais completa do grau de discriminação contra os negros e mulheres no mercado de trabalho ao longo da distribuição salarial. Para os três grupos, a discriminação é crescente em relação à posição na distribuição salarial, indicando a dificuldade de se atingir posições melhor remuneradas no mercado de trabalho por parte de mulheres e negros. A discriminação afeta principalmente as mulheres negras, seguidas das mulheres brancas e dos homens negros. Para os homens negros, a discriminação é baixa entre os mais pobres e cresce nos níveis mais altos da distribuição. As mulheres brancas sofrem ao longo de toda a distribuição com maior efeito entre os 15% mais ricos. As mulheres negras sofrem com a discriminação por cor e gênero, estando assim na pior situação entre os grupos. A remuneração da educação estimada para os quatro grupos indica ganhos crescentes conforme a posição na distribuição salarial ampliando a desigualdade salarial intra-grupo, adicionalmente, observa-se uma desvalorização da educação dos negros de ambos os sexos na determinação salarial e que as mulheres sofrem algum tipo de discriminação no que diz respeito à educação apenas nos níveis salariais mais elevados. Os ganhos salariais obtidos com a equalização da escolaridade e formalização entre os grupos discriminados e os homens brancos indicam que, no caso da educação, homens e mulheres negros teriam ganhos ao longo de toda a distribuição, com ênfase entre os mais ricos. Para a formalização, a população nos decis inferiores da distribuição salarial seria a principal beneficiada.

Planejamento de Fontes Reativas em Sistemas de Energia Elétrica utilizando a técnica de Decomposição de Benders e o algoritmo de Branch-and-Bound

This paper presents the Benders decomposition technique and Branch and Bound algorithm used in the reactive power planning in electric energy systems. The Benders decomposition separates the planning problem into two subproblems: an investment subproblem (master) and the operation subproblem (slave), which are solved alternately. The operation subproblem is solved using a successive linear programming (SLP) algorithm while the investment subproblem, which is an integer linear programming (ILP) problem with discrete variables, is resolved using a Branch and Bound algorithm especially developed to resolve this type of problem.

Aplicação de técnicas de decomposição em problemas de corte de estoque

Pós-graduação em Matemática - IBILCE