Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology

After more than twenty years of basic and applied research, the use of nanotechnology in the design and manufacture of nanoscale materials is rapidly increasing, particularly in commercial applications that span from electronics across renewable energy areas, and biomedical devices. Novel polymers are attracting significant attention for they promise to provide a low−cost high−performance alternative to existing materials. Furthermore, these polymers have the potential to overcome limitations imposed by currently available materials thus enabling the development of new technologies and applications that are currently beyond our reach. This work focuses on the development of a range of new low−cost environmentally−friendly polymer materials for applications in areas of organic (flexible) electronics, optics, and biomaterials. The choice of the monomer reflects the environmentally−conscious focus of this project. Terpinen−4−ol is a major constituent of Australian grown Melaleuca alternifolia (tea tree) oil, attributed with the oil's antimicrobial and anti−inflammatory properties. Plasma polymerisation was chosen as a deposition technique for it requires minimal use of harmful chemicals and produces no hazardous by−products. Polymer thin films were fabricated under varied process conditions to attain materials with distinct physico−chemical, optoelectrical, biological and degradation characteristics. The resultant materials, named polyterpenol, were extensively characterised using a number of well−accepted and novel techniques, and their fundamental properties were defined. Polyterpenol films were demonstrated to be hydrocarbon rich, with variable content of oxygen moieties, primarily in the form of hydroxyl and carboxyl functionalities. The level of preservation of original monomer functionality was shown to be strongly dependent on the deposition energy, with higher applied power increasing the molecular fragmentation and substrate temperature. Polyterpenol water contact angle contact angle increased from 62.7° for the 10 W samples to 76.3° for the films deposited at 100 W. Polymers were determined to resist solubilisation by water, due to the extensive intermolecular and intramolecular hydrogen bonds present, and other solvents commonly employed in electronics and biomedical processing. Independent of deposition power, the surface topography of the polymers was shown to be smooth (Rq <0.5 nm), uniform and defect free. Hardness of polyterpenol coatings increased from 0.33 GPa for 10 W to 0.51 GPa for 100 W (at 500 μN load). Coatings deposited at higher input RF powers showed less mechanical deformation during nanoscratch testing, with no considerable damage, cracking or delamination observed. Independent of the substrate, the quality of film adhesion improved with RF power, suggesting these coatings are likely to be more stable and less susceptible to wear. Independent of fabrication conditions, polyterpenol thin films were optically transparent, with refractive index approximating that of glass. Refractive index increased slightly with deposition power, from 1.54 (10 W) to 1.56 (100 W) at 500 nm. The optical band gap values declined with increasing power, from 2.95 eV to 2.64 eV, placing the material within the range for semiconductors. Introduction of iodine impurity reduced the band gap of polyterpenol, from 2.8 eV to 1.64 eV, by extending the density of states more into the visible region of the electromagnetic spectrum. Doping decreased the transparency and increased the refractive index from 1.54 to 1.70 (at 500 nm). At optical frequencies, the real part of permittivity (k) was determined to be between 2.34 and 2.65, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies, where permittivity increased with input RF energy – from 2.32 to 2.53 (at 10 GHz ) and from 2.65 to 2.83 (at 20 GHz). At low frequencies, the dielectric constant was determined from current−voltage characteristics of Al−polyterpenol−Al devices. At frequencies below 100 kHz, the dielectric constant varied with RF power, from 3.86 to 4.42 at 1 kHz. For all samples, the resistivity was in order of 10⁸−10⁹ _m (at 6 V), confirming the insulating nature of polyterpenol material. In situ iodine doping was demonstrated to increase the conductivity of polyterpenol, from 5.05 × 10⁻⁸ S/cm to 1.20 × 10⁻⁶ S/cm (at 20 V). Exposed to ambient conditions over extended period of time, polyterpenol thin films were demonstrated to be optically, physically and chemically stable. The bulk of ageing occurred within first 150 h after deposition and was attributed to oxidation and volumetric relaxation. Thermal ageing studies indicated thermal stability increased for the films manufactured at higher RF powers, with degradation onset temperature associated with weight loss shifting from 150 ºC to 205 ºC for 10 W and 100 W polyterpenol, respectively. Annealing the films to 405 °C resulted in full dissociation of the polymer, with minimal residue. Given the outcomes of the fundamental characterisation, a number of potential applications for polyterpenol have been identified. Flexibility, tunable permittivity and loss tangent properties of polyterpenol suggest the material can be used as an insulating layer in plastic electronics. Implementation of polyterpenol as a surface modification of the gate insulator in pentacene-based Field Effect Transistor resulted in significant improvements, shifting the threshold voltage from + 20 V to –3 V, enhancing the effective mobility from 0.012 to 0.021 cm²/Vs, and improving the switching property of the device from 10⁷ to 10⁴. Polyterpenol was demonstrated to have a hole transport electron blocking property, with potential applications in many organic devices, such as organic light emitting diodes. Encapsulation of biomedical devices is also proposed, given that under favourable conditions, the original chemical and biological functionality of terpinen−4−ol molecule can be preserved. Films deposited at low RF power were shown to successfully prevent adhesion and retention of several important human pathogens, including P. aeruginosa, S. aureus, and S. epidermidis, whereas films deposited at higher RF power promoted bacterial cell adhesion and biofilm formation. Preliminary investigations into in vitro biocompatibility of polyterpenol demonstrated the coating to be non−toxic for several types of eukaryotic cells, including Balb/c mice macrophage and human monocyte type (HTP−1 non-adherent) cells. Applied to magnesium substrates, polyterpenol encapsulating layer significantly slowed down in vitro biodegradation of the metal, thus increasing the viability and growth of HTP−1 cells. Recently, applied to varied nanostructured titanium surfaces, polyterpenol thin films successfully reduced attachment, growth, and viability of P. aeruginosa and S. aureus.

Enzyme-catalysed synthesis and reactions of benzene oxide/oxepine derivatives of methyl benzoates

A series of twelve benzoate esters was metabolised, by species of the Phellinus genus of wood-rotting fungi, to yield the corresponding benzyl alcohol derivatives and eight salicylates. The isolation of a stable oxepine metabolite, from methyl benzoate, allied to evidence of the migration and retention of a carbomethoxy group ( the NIH Shift), during enzyme-catalysed ortho-hydroxylation of alkyl benzoates to form salicylates, is consistent with a mechanism involving an initial arene epoxidation step. This mechanism was confirmed by the isolation of a remarkably stable, optically active, substituted benzene oxide metabolite of methyl 2-( trifluoromethyl) benzoate, which slowly converted into the racemic form. The arene oxide was found to undergo a cycloaddition reaction with 4-phenyl-1,2,4-triazoline-3,5-dione to yield a crystalline cycloadduct whose structure and racemic nature was established by X-ray crystallography. The metabolite was also found to undergo some novel benzene oxide reactions, including epoxidation to give an anti-diepoxide, base-catalysed hydrolysis to form a trans-dihydrodiol and acid-catalysed aromatisation to yield a salicylate derivative via the NIH Shift of a carbomethoxy group.

Frequency and gravity of human envenomations caused by marine catfish (suborder siluroidei): a clinical and epidemiological study

Introduction and objectives: Catfish occur in marine and freshwater environments worldwide. They have three serrated venomous bony stings in the dorsal and pectoral fins that are used for defence against predators and are refilled by glandular tissues under the epithelium. However, some catfishes do not have poisonous glands next to the sting and cause traumatic wounds without poisoning. The objective of this study was to provide data for, and comment on, the epidemiological and clinical problems caused by marine catfish.Patients and methods: the authors have observed, followed and documented 127 injuries caused by marine catfish stings during different phases of the envenoming over a time period of 8 years at three points along the Western Atlantic Ocean coast.Results: the patients presented intense pain during the acute phase of envenoming and complications, such as bacterial and fungi infections and retention of bony fragments, in the later phase. Immersion of the affected extremity in hot water was used in about 20% of cases with excellent results.Discussion: Injuries caused by marine catfish are common (about 20% of injuries caused by marine animals in a series of more than 700 injuries recorded by the author) and cause intense pain and later complications. Immersion of the affected extremity in hot water results in improvement in the acute phase, but does not prevent the appearance of secondary infection or foreign body reactions. (c) 2006 Elsevier Ltd. All rights reserved.

Antitumor activity and pharmacokinetics of a mixed-backbone antisense oligonucleotide targeted to the RIα subunit of protein kinase A after oral administration

Overexpression of the RIα subunit of cAMP-dependent protein kinase (PKA) has been demonstrated in various human cancers. PKA has been suggested as a potential target for cancer therapy. The goal of the present study was to evaluate an anti-PKA antisense oligonucleotide (mixed-backbone oligonucleotide) as a therapeutic approach to human cancer treatment. The identified oligonucleotide inhibited the growth of cell lines of human colon cancer (LS174T, DLD-1), leukemia (HL-60), breast cancer (MCF-7, MDA-MB-468), and lung cancer (A549) in a time-, concentration-, and sequence-dependent manner. In a dose-dependent manner, the oligonucleotide displayed in vivo antitumor activity in severe combined immunodeficient and nude mice bearing xenografts of human cancers of the colon (LS174T), breast (MDA-MB-468), and lung (A549). The routes of drug administration were intraperitoneal and oral. Synergistic effects were found when the antisense oligonucleotide was used in combination with the cancer chemotherapeutic agent cisplatin. The pharmacokinetics of the oligonucleotide after oral administration of 35S-labeled oligonucleotide into tumor-bearing mice indicated an accumulation and retention of the oligonucleotide in tumor tissue. This study further provides a basis for clinical studies of the antisense oligonucleotide targeted to the RIα subunit of PKA (GEM 231) as a cancer therapeutic agent used alone or in combination with conventional chemotherapy.

Effects of vehicle and region of application on absorption of hydrocortisone through canine skin

Objective-To determine the effects of various vehicles on the penetration and retention of hydrocortisone applied to canine skin. Sample Population-20 canine skin samples obtained from the thorax, neck, and groin regions of 5 Greyhounds. Procedure-Skin was harvested from dogs after euthanasia and stored at -20 degrees C until required. The skin was then defrosted and placed into diffusion cells, which were maintained at approximately 32 degrees C by a water bath. Saturated solutions of hydrocortisone that contained trace amounts of radiolabelled [C-14]-hydrocortisone in each vehicle (ie, PBS solution [PBSS] alone, 50% ethanol [EtOH] in PBSS [wt/wt], and 50% propylene glycol in PBSS [wt/wt]) were applied to the outer (stratum corneum) surface of each skin sample, and aliquots of receptor fluid were collected for 24 hours and analyzed for hydrocortisone. Results-The maximum flux of hydrocortisone was significantly higher for all sites when dissolved in a vehicle containing 50% EtOH, compared with PBSS alone or 50% propylene glycol, with differences more prominent in skin from the neck region. In contrast, higher residues of hydrocortisone were found remaining within the skin when PBSS alone was used as a vehicle, particularly in skin from the thorax and neck. Conclusions and Clinical Relevance-Penetration of topically applied hydrocortisone is enhanced when EtOH is used in vehicle formulation. Significant regional differences (ie, among the thorax, neck, and groin areas) are also found in the transdermal penetration and skin retention of hydrocortisone. Variability in clinical response to hydrocortisone can be expected in relation to formulation design and site of application.

Gravity spun polycaprolactone fibers for applications in vascular tissue engineering:proliferation and function of human vascular endothelial cells

Poly(ε-caprolactone) (PCL) fibers produced by wet spinning from solutions in acetone under low-shear (gravity-flow) conditions resulted in fiber strength of 8 MPa and stiffness of 0.08 Gpa. Cold drawing to an extension of 500% resulted in an increase in fiber strength to 43 MPa and stiffness to 0.3 GPa. The growth rate of human umbilical vein endothelial cells (HUVECs) (seeded at a density of 5 × 104 cells/mL) on as-spun fibers was consistently lower than that measured on tissue culture plastic (TCP) beyond day 2. Cell proliferation was similar on gelatin-coated fibers and TCP over 7 days and higher by a factor of 1.9 on 500% cold-drawn PCL fibers relative to TCP up to 4 days. Cell growth on PCL fibers exceeded that on Dacron monofilament by at least a factor of 3.7 at 9 days. Scanning electron microscopy revealed formation of a cell layer on samples of cold-drawn and gelatin-coated fibers after 24 hours in culture. Similar levels of ICAM-1 expression by HUVECs attached to PCL fibers and TCP were measured using RT-PCR and flow cytometry, indicative of low levels of immune activation. Retention of a specific function of HUVECs attached to PCL fibers was demonstrated by measuring their immune response to lipopolysaccharide. Levels of ICAM-1 expression increased by approximately 11% in cells attached to PCL fibers and TCP. The high fiber compliance, favorable endothelial cell proliferation rates, and retention of an important immune response of attached HUVECS support the use of gravity spun PCL fibers for three-dimensional scaffold production in vascular tissue engineering. © Mary Ann Liebert, Inc.

Estratégias para distribuição e fixação de médicos em sistemas nacionais de saúde: o caso brasileiro

A distribuição geográfica de médicos é um problema com que se defrontam os sistemas nacionais de saúde e, no Brasil, tem se tornado um dos desafios para a consolidação do Sistema único de Saúde (SUS). A análise dos determinantes dessa distribuição está fundamentado em abordagens sobre o mercado de trabalho em saúde e no médico sua formação ou oferta inserido no contexto histórico, político, social e institucional em que são construídos. O referencial de análise proposto neste estudo tem como objetivo evidenciar os fatores e condicionantes que interferem na distribuição e fixação de médicos identificar possíveis estratégias de intervenção que podem ser aplicadas à realidade brasileira, no contexto das políticas públicas. O mote para essa discussão é a compreensão de que a forte concentração geográfica dos profissionais e dos serviços impede a concretização dos princípios que regem o Sistema Único de Saúde, particularmente no que se refere à universalização, à integralidade e à própria descentralização. As estratégias tentadas pelo governo brasileiro também são abordadas, mais especificamente, o Projeto Rondon, o Programa de Interiorização das Ações de Saúde e Saneamento (PIASS) e o Programa de Interiorização do SUS (PISUS). Essa análise é complementada com um estudo de caso sobre a experiência recente no campo da política pública em saúde destinada a minimizar a má distribuição de médicos no território nacional: o Programa de Interiorização do Trabalho em Saúde (PITS), implementado pelo Ministério da Saúde em 2001. Sua condição de estratégia inédita na política de recursos humanos em saúde em nosso país permitiu identificar aspectos relevantes para qualquer iniciativa que pretenda fortalecer a distribuição de profissionais de saúde, para além dos grandes centros urbanos. Por fim, o estudo oferece um referencial de análise para a distribuição e a fixação de médicos, construído a partir dos elementos contemplados na revisão da literatura, na discussão teórica, no aporte das experiências nacionais e internacionais e nos resultados obtidos no estudo de caso.

The Migration of Doctors and Nurses from South Pacific Island Nations

Little is known of the structure of the international migration of skilled health professionals. Accelerated migration of doctors and nurses from the Pacific island states of Fiji, Samoa and Tonga to the Pacific periphery is part of the globalization of health care. The findings from a recent survey of 251 doctors and nurses from the three island countries are reported here. Key determinants of both present migration status and future migration intentions were analyzed using econometric methods. Nurses' and doctors' propensities to migrate are influenced by both income and non-income factors, including ownership of businesses and houses. Migrants also tend to have more close relatives overseas, to have trained there, and so experienced superior working conditions. Migration propensities vary between countries, and between nurses and doctors within countries. Tongan nurses have a higher propensity to migrate, mainly because of greater relative earnings differentials, but are also more likely to return home. The role of kinship ties, relative income differentials and working conditions is evident in other developing country contexts. Remittances and return migration, alongside business investment, bring some benefits to compensate for the skill drain. National development policies should focus on encouraging return migration, alongside retention and recruitment, but are unlikely to prevent out migration. (C) 2003 Elsevier Ltd. All rights reserved.

A holistic approach to the support and engagement of first year students : a retention strategy

Institutions should enact holistic approaches that address students’ personal, social and academic engagement in the early weeks of first year to facilitate retention (Nelson, Kift & Clarke, 2008). This holistic approach is central to the FYE program at Queensland University of Technology (QUT), which was established to maximise learning engagement and hence positively influence the retention of commencing students. The program aims to • engage students in their learning through an intentionally designed and enacted curriculum (Kift, 2008) • facilitate timely access to life and learning support • promote a sense of belonging to the discipline, cohort and profession. The FYE program’s aims are achieved by strategic alliances between academic and professional staff across the institution.

A holistic approach to the support and engagement of first year students : a retention strategy.

Institutions should enact holistic approaches that address students’ personal, social and academic engagement in the early weeks of first year to facilitate retention (Nelson, Kift & Clarke, 2008). This holistic approach is central to the FYE program at Queensland University of Technology (QUT), which was established to maximise learning engagement and hence positively influence the retention of commencing students.

Retention and degradation of organics in Rundle waste shale/retort water mixtures

Batch, column and field lysimeter studies have been conducted to evaluate the concept of codisposal of retort water with Rundle (Queensland, Australia) waste shales. The batch studies indicated that degradation of a significant proportion of the total organic load occurs if the mixture is seeded with soil or compost. These results are compared with those from laboratory column studies and from the field lysimeter at the Rundle site. G.c.-m.s. analysis of some of the eluants indicated that significant degradation of the base-neutral fraction occurs even if no soil seed is added, and that degradation of this fraction was higher under anaerobic conditions.