Learning without boundaries

Discipline boundaries of science and technology education are inevitable. Often, such barriers are an obstacle to industry-based learning leading to preventable complexities. Industry-based learning is a complex scenario, rather than conventional learning, leading to the study of liquid learning, which is a timely concept to investigate learning without boundaries. Liquid learning consists of accountability, expectations and driven by outcomes with different learning choices. Liquid learning is a significant phenomenon requiring awareness in the science and technology education. This paper aims to discuss some practical issues when designing industry-based learning without boundaries. A case study approach is reviewed and presented.

Analysis and prediction of the critical current density across [001]-tilt YBa2Cu3O7- grain boundaries of arbitrary misorientation angles

A qualitative analysis of the expected dilatation strain field in the vicinity of an array of grain-boundary (GB) dislocations is presented. The analysis provides a basis for the prediction of the critical current densities (jc) across low-angle YBa2Cu3O7- (YBCO) GBs as a function of their energy. The introduction of the GB energy allows the extension of the analysis to high-angle GBs using established models which predict the GB energy as a function of misorientation angle. The results are compared to published data for jc across [001]-tilt YBCO GBs for the full range of misorientations, showing a good fit. Since the GB energy is directly related to the GB structure, the analysis may allow a generalization of the scaling behavior of jc with the GB energy. © 1995 The American Physical Society.

Microstructure and properties of artificial grain boundaries in epitaxial YBA2Cu3O7-δ thin films grown on [001] tilt YZrO2 bicrystals

The microstructure of artificial grain boundaries in YBa2Cu3O7-δ (YBCO) thin films grown on [001] tilt YZrO2 (YSZ) bicrystal substrates has been characterized using transmission electron microscopy and atomic force microscopy. Despite a relatively straight morphology of the substrate boundaries, the film boundaries were wavy. The waviness was a result of the combined effects of grooving at the substrate boundaries prior to the film deposition and an island-growth mechanism for YBCO on YSZ substrates. The dihedral angle of the groove walls varied with the misorientation angle and depended on the symmetry of the substrate boundary. The amplitudes of the film boundary waviness compared well with the widths of the grooves. In addition, the grooves induced local bending of the YBCO lattice planes and additional tilt components perpendicular to the c-axis close to the film boundaries. © 1995.

Weak links and dc SQUIDS on artificial nonsymmetric grain boundaries in YBa2Cu3O7-δ

We have studied weak links and dc-SQUIDs made from pulsed laser deposited YBa2Cu3O7-δ thin films on Y-ZrO 2 bicrystal substrates. The transport properties of the weak links were studied as a function of the misorientation angle (θ) between the two halves of the bicrystal and an exponential dependence of the weak link critical current density was observed for angles up to 40°at 77 K. Josephson effects with clear microwave and magnetic field responses were observed. An optimum dc-SQUID performance at 77 K was obtained for θ=32°. At this temperature, we achieved a periodic magnetic field response with a modulation depth of 12 μV.

Graphene ripples generated by grain boundaries in highly ordered pyrolytic graphite

Atomic scale periodic ripples that extend for several nanometers on the surface of adjacent graphitic grains have been observed for the first time on highly ordered pyrolitic graphite by UHV-STM. The ripples emanate from a grain boundary, and are explained in terms of a mechanical deformation due to the elastic strain accumulated along the GB, which is relieved out-of-plane in the topmost graphene layer. We present a molecular dynamics model that accounts for the formation of similar ripples as result of the lattice mismatch induced by two different grain orientations.

The impact of organizational boundaries on (re)building capabilities

The literature concerning firm boundaries has focussed extensively on the rationale for different boundary choices and the economic efficiencies that such choices can make. There is also an acknowledged position that a firm’s boundary choices may impact the ability of a firm to maintain and even build new capabilities, though such choices may not be optimal from an economic efficiency perspective. It is in this context that we seek to investigate how firms make this potential trade-off in respect of their boundary choices and how these choices are implemented across a wide range of activities. Using qualitative data from three public sector construction oriented organizations, we observe that neither pure make nor buy decisions assisted significantly in capability building. Dual modes – where firms make and buy the same product or service simultaneously – provided firms with some opportunities to manage this paradox, but the most successful decisions seemed to occur in respect of using intermediate governance modes such as alliances. We also observed that the boundary choice was just one dimension of the capability building process and firms pursuing the same boundary choice decisions often had quite divergent outcomes on the basis of their boundary management and the ability of knowledge to move across firm boundaries.

Flag state responsibility for maritime terrorism

Modern international shipping is largely a flag state-based system. Only the flag state has complete authority over the vessels that fly its flag, and as a result, other states’ jurisdiction over these vessels is very limited. Against this backdrop, this article examines the flag state’s responsibility for maritime terrorism, a major security issue and vulnerability in the global supply chain. It is not an exaggeration that the global community’s repeated statements regarding the illegality of terrorism have created a customary international law obligation for states to take all possible steps for the prevention of terrorism. This article argues that providing flags to suspicious entities in an obscure registration system is not compatible with this obligation.

State responsibility for maritime terrorism

Maritime terrorism is one of the main maritime security issues in the contemporary world. The threat of maritime terrorism is more apparent than ever in the post-September 11 era. Although maritime terrorism is an old issue, the disastrous events of 11 September 2001 brought this issue again onto the global agenda. This incident brought to the forefront the longstanding concerns that terrorists could severely disrupt the global maritime supply chain by using shipping containers or vessels to attack major business centres, port facilities and offshore installations. A number of international criminal law studies have been conducted to identify international legal challenges in maritime security. Some of these works have critically examined the international legal framework for maritime security and identified the lacunas in the existing system. Some of these writings have also identified that emerging maritime terrorism issues are prompting States to introduce some stringent measures. Although the international legal regime related to maritime terrorism is a well-researched area, very little research work has explored the legal issues related to State responsibility for maritime terrorism. This article argues that, although the United Nations Convention on the Law of the Sea (UNCLOS) provisions related to maritime piracy may not be applicable for some dimensions of maritime violence, different provisions of UNCLOS may relevant in identifying State responsibility for maritime terrorism.

Conceptualising Women's Working Lives : Moving the Boundaries of Discourse

"Theoretical work on the career development of women has travelled a journey from critique to creation. Early work responded to and criticised a literature that focused on theorising male roles in a workplace that was conceptualised as providing vertical career paths primarily for middle class males. More recently theorists are creating new constructions and frameworks to enable a more holistic understanding of career, applicable to both women and men. These constructions include broadening the discussion from women’s careers to women’s working lives. This is the fifth book in the Sense Publishers Career Development Series. It features the vibrant work of contributors from around the world writing in the field of women’s working lives. It emphasises the need to explore theoretical connections and understandings in order to facilitate a more holistic and inclusive understanding of women’s working lives. The writers in the current volume acknowledge the changing roles of women, in both public and private spheres. Women’s roles in paid work are changing both in their nature and type of engagement. In addition, with an ageing population, women’s roles in care work are increasingly being extended from child care to aged care. This book provides a history of theorising about women's careers, in addition to presenting a focus on current empirical and theoretical work which contributes to understandings of women's working lives. It’s contributions both map the current discourse and challenge future work to extend the boundaries of that discourse."--publisher website

Building boundaries on boundary objects : a field study of a ubicomp tool in a design studio

In this paper, we provide the results of a field study of a Ubicomp system called CAM (Cooperative Artefact Memory) in a Product Design studio. CAM is a mobile-tagging based messaging system that allows designers to store relevant information onto their design artefacts in the form of messages, annotations and external web links. From our field study results, we observe that the use of CAM adds another shared ‘space’ onto these design artefacts – that are in their natural settings boundary objects themselves. In the paper, we provide several examples from the field illustrating how CAM helps in the design process.

Pushing cultural competence boundaries in nutrition and dietetics training

A health workforce ready for safe practice is a government priority, and particularly critical to support indigenous communities closing ‘the gap’. Increased pressure exists on dietetic training programs for quality placements, with fewer opportunities for immersion in Aboriginal and Torres Strait Islander communities to demonstrate cultural competence. In 2012, Queensland University of Technology established a partnership with Apunipima Cape York Health Council with 56 weeks of dietetic placement for 8 students provided to achieve these aims. Clinical practice in Community Public Health Nutrition (CPHN) was structured in a standard 6 week placement, with Individual Case Management (ICM) and Foodservice Management (FSM) integrated across 8 weeks (4 each), with an additional 2 weeks ICM prior in a metropolitan indigenous health service. Students transitioned from urban to rural then remote sites, with new web-based technologies used for support. Strong learning opportunities were provided, with CPHN projects in antenatal and child health, FSM on standardisation of procedures in a 22 bed health facility, and ICM exposing students to a variety of cases via hospital in/outpatients, general clinics and remote community outreach. Supervisor focus group evaluation was positive, with CPHN and FSM enhancing capacity of service. Student focus group evaluation revealed placements exceeded expectations, with rating high, and strong confidence in cultural competence described. Students debriefed final and third year cohorts on their experiences, with increased awareness and enthusiasm for work with indigenous communities indicated by groups. With the success of this partnership, placements are continuing 2013, and new boundaries in dietetic training established.

Crossing Boundaries : Australian student teachers creating ‘The Global Teacher Exhibition’

This DVD describes a curriculum project embedded into the subject The Global Teacher (code: CLB049/LCB327, Faculty of Education, Queensland University of Technology). The Global Teacher is a subject within the undergraduate degree program for pre-service teachers and provides a global perspective on socio-political issues that shape education. The curriculum in The Global Teacher was designed around a collaborative partnership between Queensland University of Technology and State Library Queensland. Through this collaboration, State Library became not only a resource for information, but also helped to develop the pedagogical skills of the pre-service teaachers by guiding them in exhibiting and curating Global Teacher themes for a broader community-based audience. The collaboration became part of the assessment for The Global Teacher, requiring the pre-service teachers to visually translate their understandings of global educational issues into a public exhibition, which was held at State Library Queensland on 1st May, 2013. This DVD is a creative work explaining the stages of this collaborative project. It explores the learning outcomes achieved, using the voices of participants: the pre-service teachers, the QUT teacher educators and staff of State Library Queensland. A detailed description of this project is to be found at: http://libguides.library.qut.edu.au/content.php?pid=595206&sid=4908024&preview=1b455ed4f2c606d19702090f85d1f965

Cholesterol regulates Syntaxin 6 trafficking at trans-Golgi network endosomal boundaries.

Inhibition of cholesterol export from late endosomes causes cellular cholesterol imbalance, including cholesterol depletion in the trans-Golgi network (TGN). Here, using Chinese hamster ovary (CHO) Niemann-Pick type C1 (NPC1) mutant cell lines and human NPC1 mutant fibroblasts, we show that altered cholesterol levels at the TGN/endosome boundaries trigger Syntaxin 6 (Stx6) accumulation into VAMP3, transferrin, and Rab11-positive recycling endosomes (REs). This increases Stx6/VAMP3 interaction and interferes with the recycling of αVβ3 and α5β1 integrins and cell migration, possibly in a Stx6-dependent manner. In NPC1 mutant cells, restoration of cholesterol levels in the TGN, but not inhibition of VAMP3, restores the steady-state localization of Stx6 in the TGN. Furthermore, elevation of RE cholesterol is associated with increased amounts of Stx6 in RE. Hence, the fine-tuning of cholesterol levels at the TGN-RE boundaries together with a subset of cholesterol-sensitive SNARE proteins may play a regulatory role in cell migration and invasion.