A criança nativa digital no contexto de filmes publicitários

Pós-graduação em Psicologia - FCLAS

Layer-by-Layer assembled cobalt ferrite nanoparticles for chemical sensing

Ultra-thin (thicknesses of 50-90 nm) nanocomposite films of cobalt ferrite nanoparticles (np-CoFe2O4, 18 nm in diameter) and polyelectrolytes (doped polyaniline-PANI, poly-3,4-ethylenedioxy thiophene: polystyrene sulfonic acid-PEDOT:PSS, and sulfonated lignin-SL) are assembled layer-by-layer onto interdigitated microelectrodes aiming at to create novel nanostructured sensoactive materials for liquid media chemical sensors. The nanocomposites display a distinctive globular morphology with nanoparticles densely-packed while surrounded by polyelectrolytes. Due to the presence of np-CoFe2O4 the nanocomposites display low electrical conductivity according to impedance data. On the other hand, this apparent shortcoming turns such nanocomposites much more sensitive to the presence of ions in solution than films made exclusively of conducting polyelectrolytes. For example, the electrical resistance of np-CoFe2O4/PEDOT:PSS and PANI/SL/np-CoFe2O4/SL architectures has a 10-fold decrease when they are immersed in 20 mmol. L-1 NaCl solution. Impedance spectra fitted with the response of an equivalent circuit model suggest that the interface created between nanoparticles and polyelectrolytes plays a major role on the nanocomposites electrical/dielectrical behavior. Since charge transport is sensitive to nanoparticle-polyelectrolyte interfaces as well as to the physicochemical conditions of the environment, the np-CoFe2O4-based nanocomposites can be used as sensing elements in chemical sensors operated under ac regime and room temperature.

Liquid crystalline cellulose derivatives for mirrorless lasing

In this thesis cholesteric films made of liquid crystalline cellulose derivatives with improved optical properties were prepared. The choice of the solvent, hydrogen bond influencing additives, the synthetic realization of a very high degree of substitution on the cellulosic polymer and the use of mechanical stirring at the upper concentration limit of the liquid crystalline range were the basis for an improved alignment of the applied cellulose tricarbamates. In combination with a tuned substrate treatment and film preparation method, cholesteric films were obtained, with optical properties that were theoretically predicted and only known from low molecular weight liquid crystals so far. Subsequent polymerization allowed a permanent fixing of the alignment and the fabrication of free standing and insensitive films.rnThe incorporation of inorganic nanorods into the cholesteric host material was mediated with tailored block copolymers, available via controlled radical polymerization methods. In addition to the shape match between the rodlike mesogens of the host and the nanorods it was possible to increase the miscibility of both materials. Nevertheless, the size of the nanorods, in comparison to the mesogens, in these densely packed liquid crystalline phases as well as their long equilibration times were the reasons for phase separation. Nanorods are, in principle, valuable substitutes for organics, but their utilization in cellulosic CLC was not to be combined with a high quality alignment of the cholesteric structure.rnA swelling process of polymerized films in a dye solution or dissolving dyes in non-polymerized CLC was used for incorporation of the organic chromophores. With the first method the CLC could be aligned and polymerized without any disturbance due to dye molecules. The optical properties of dye and CLC were matched, with regard to mirrorless lasing devices. The dye was optically excited and laser emission supported by the cholesteric cavity was obtained. The polarization and wavelength of the emitted radiation as well as its bandwidth, the obtained interference pattern and threshold behavior of the emission proofed the feedback mechanism that was not believed to be realizable in liquid crystalline polymers. rnUtilization of a microfluidic co-flow injection device enabled us to transfer the properties of cellulosic CLC from the planar film shape to spherical micrometer sized particles. The pure material yielded particles with distorted mesogen alignment similar to films prepared by capillary flow. Dilution of the CLC with a solvent that migrated into the carrier phase during particle preparation provided the basis for particles with well ordered areas. rnAlthough cellulose derivatives were known for their liquid crystalline behavior for decades and synthesized in mass production, their application as feedback material was affected by bad optical properties. In comparison to low molar mass compounds, the low degree of order in the CLC phase was the cause. With the improved material, defined lasing emission was shown and characterized. Derivatives of cellulose are desirable materials, because, as a renewable resource, they are available in large amounts for a low price and need only simple derivatization reactions. The fabrication of CLC films with tunable lasing emission, for which this thesis can provide a starting point, is in good agreement with today's requirements of modern technology and its miniaturization.rn

The Representation of Motherhood in Polish Cinema

The project aimed to analyse representations of motherhood in Polish cinema as a special case of a more general system within the representation of women. It concentrated on the image of the Polish Mother created during the 19th century in Polish culture under the influence of specific political, social and religious factors. Ms. Ostrowska's initial hypothesis was that this symbolic image became one of the most stable elements in Polish cinema and as her research revealed, it was valuable for the preservation of national identity but nevertheless a fiercely constraining model for Polish femininity. In order to fully understand the nature of this persistent image it was initially necessary to related it to broader contexts and issues in representation. These included the image of the Polish Mother within general mythological structures (using the notion of myth in the Barthesian sense). Following her initial research Ms. Ostrowska felt that it was most appropriate to view the myth of the Polish Mother as a dominant ideological structure in the discourse of motherhood within Polish culture. An analysis of the myth of the Polish Mother can provide an insight into how Polish society sees itself at different periods in time and how a national identity was constructed in relation to particular ideological demands stemming from concrete historical and political situations. The analysis of the film version of this myth also revealed some aspects of the national character of Polish cinema. There the image of woman has become enshrined as the "eternal feminine", with virtues which are inevitably derived directly from Catholicism, particularly in relation to the networks of meanings around the central figure of Mary, Mother of God. In 19th century Poland these were linked with patriotic values and images of woman became part of the defence of the very idea of Poland and Polishness. After World War Two, this religious-political image system was adapted to the demands of the new communist ideology. The possibility of manipulating the ideological dimensions of the myth of the Polish Mother is due to the very nature of the image, which as a symbol of civil religion had been able to function independently of any particular state or church institution. Although in communist ideology the stress was on the patriotic aspect of the myth, its pronounced religious aspect was also transmitted, consciously or not, in the denotation process, this being of great significance in the viewer's response to the female character. This appropriation of elements derived from the national patriotic tradition into the discourse of communist ideology was a very efficient strategy to establish the illusion of continuity in national existence, which was supposed to convince society of the rightness of the new political situation. The analysis of films made in the post-war period showed the persistence of this discourse on motherhood in a range of cinematic texts regardless of the changing political situation. Ms. Ostrowska claims that the stability of this discursive formation is to a certain extent the result of the mythological aspect of the mother figure. This mythological structure also belongs to the ideology of Romanticism which in general continues to prevail in Polish cultural discourse as a meta-language of national community. The analysis of the films confirmed the hypothesis of the Polish Mother as a myth-sign whose signifier is stable whereas the signified depends on the specific historical conditions in which it is set. Therefore in the famous propaganda documentary Kobiety naszych dni (Women of Our Days, 1951) by Jan Zelnik, and in other films made after the October 1956 "thaw" it functions as an "empty sign. She concludes that it would be difficult to deny that the myth of the Polish Mother has offered Polish women a special role in national life, granting them a high moral position in the social, hierarchy. However the processes of idealisation involved have resulted in a deprivation of her subjectivity and the right to decide about her own life. This idealisation also served to strengthen traditional patriarchal structures through this set of female obligations to the mother land. In Polish ideology it is not a man who demands sacrifice from a woman but the motherland, which, deprived of the institutions of male power for nearly 150 years, had functioned as a feminine structure. That is why oppressive aspects of the myth have been obscured for so long. While Polish women were doubtless able to accept the constrictions because of their sense of national duty and any misgivings were overridden by the argument of the cause, it is important to recognise that the strength of these constructions, compounded by the ways in which they spoke of and continue to speak of a certain perfection, make them persist into contemporary Poland. Poland is however no longer embattled and the signs that made these meanings are potentially empty. This space for meaning will be and is already being contested and increasingly colonised by current western models of femininity. Ms. Ostrowska's final question is whether this will help to prevent a possible resentful victimisation of the silent and noble Polish Mother.

Streaming Italian horror cinema in the UK: Lovefilm Instant.

This article investigates the distribution of Italian horror cinema in the age of video streaming, analyzing its presence and categorization on the platform Lovefilm Instant UK, in order to investigate the importance of ‘niche’ in what is known as the long tail of online distribution and the online availability of exploitation films. I argue that looking at the streaming presence of Italian horror and comparing it to its prior distribution on home video formats (in particular VHS and DVD) we can grasp how distribution and access have shaped the understanding of the genre. In particular, I address the question of the categorization of the films made by the S-VOD services and the limits of streaming distribution, such as lack of persistency in availability and the need of enhanced curatorship.

Filmowe interpretacje polskiej transformacji gospodarczej. Kulturowe spory o obraz Polski

Wydział Nauk Społecznych: Instytut Kulturoznawstwa

Modeling of micro- and nanostructures made of films and crystals/fibers arrays

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2013

Wine classification by taste sensors made from ultra-thin films and using neural networks

This paper reports on a sensor array able to distinguish tastes and used to classify red wines. The array comprises sensing units made from Langmuir-Blodgett (LB) films of conducting polymers and lipids and layer-by-layer (LBL) films from chitosan deposited onto gold interdigitated electrodes. Using impedance spectroscopy as the principle of detection, we show that distinct clusters can be identified in principal component analysis (PCA) plots for six types of red wine. Distinction can be made with regard to vintage, vineyard and brands of the red wine. Furthermore, if the data are treated with artificial neural networks (ANNs), this artificial tongue can identify wine samples stored under different conditions. This is illustrated by considering 900 wine samples, obtained with 30 measurements for each of the five bottles of the six wines, which could be recognised with 100% accuracy using the algorithms Standard Backpropagation and Backpropagation momentum in the ANNs. (C) 2003 Elsevier B.V. All rights reserved.

Fabrication and characterization of chemical sensors made from nanostructured films of poly(o-ethoxyaniline) prepared with different doping acids

Chemical sensors made from nanostructured films of poly(o-ethoxyaniline) POEA and poly(sodium 4-styrene sulfonate) PSS are produced and used to detect and distinguish 4 chemicals in solution at 20 mM, including sucrose, NaCl, HCl, and caffeine. These substances are used in order to mimic the 4 basic tastes recognized by humans, namely sweet, salty, sour, and bitter, respectively. The sensors are produced by the deposition of POEA/PSS films at the top of interdigitated microelectrodes via the layer-by-layer technique, using POEA solutions containing different dopant acids. Besides the different characteristics of the POEA/PSS films investigated by UV-Vis and Raman spectroscopies, and by atomic force microscopy.. it is observed that their electrical response to the different chemicals in liquid media is very fast, in the order of seconds, systematical, reproducible, and extremely dependent on the type of acid used for film fabrication. The responses of the as-prepared sensors are reproducible and repetitive after many cycles of operation. Furthermore, the use of an "electronic tongue" composed by an array of these sensors and principal component analysis as pattern recognition tool allows one to reasonably distinguish test solutions according to their chemical composition. (c) 2007 Published by Elsevier B.V.

Sensor array made with nanostructured films to detect a phenothiazine compound

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The God who made himself; a story for children who like music, with notes (for grown-ups),

Bibliography at end of chapters.

Phase transitions in biodegradable films based on blends of gelatin and poly (vinyl alcohol)

The aim of this work was to study the effect of the hydrolysis degree (HD) and the concentration (C PVA) of two types of poly (vinyl alcohol) (PVA) and the effect of the type and the concentration of plasticizers on the phase properties of biodegradable films based on blends of gelatin and PVA, using a response-surface methodology. The films were made by casting and the studied properties were their glass (Tg) and melting (Tm) transition temperatures, which were determined by diferential scanning calorimetry (DSC). For the data obtained on the first scan, the fitting of the linear model was statistically significant and predictive only for the second melting temperature. In this case, the most important effect on the second Tm of the first scan was due to the HD of the PVA. In relation to the second scan, the linear model could be fit to Tg data with only two statistically significant parameters. Both the PVA and plasticizer concentrations had an important effect on Tg. Concerning the second Tm of the second scan, the linear model was fit to data with two statistically significant parameters, namely the HD and the plasticizer concentration. But, the most important effect was provoked by the HD of the PVA.

Free-standing urethane/urea elastomer films undoped and doped with ferro-nano-particles

We report on an experimental study of the structures presented by urethane/urea elastomeric films without and with ferromagnetic nanoparticles incorporated. The study is made by using the X-ray diffraction, nuclear magnetic resonance (NMR), optical, atomic and magnetic force (MFM) microscopy techniques, and mechanical assays. The structure of the elastomeric matrix is characterized by a distance of 0.46 nm between neighboring molecular segments, almost independent on the stretching applied. The shear casting performed in order to obtain the elastomeric films tends to orient the molecules parallel to the flow direction thus introducing anisotropy in the molecular network which is reflected on the values obtained for the orientational order parameter and its increase for the stretched films. In the case of nanoparticles-doped samples, the structure remains nearly unchanged although the local order parameter is clearly larger for the undoped films. NMR experiments evidence modifications in the molecular network local ordering. Micrometer size clusters were observed by MFM for even small concentration of magnetic particles.

Surface characterization of absorbing polymer films deposited on transparent glasses

PANI films were deposited on glass substrates by in-situ polymerization and characterized by UV-VIS spectroscopy and atomic force microscopy. A method is developed to accurately analyze ellipsometric data obtained for transparent glass substrates before and after modification with absorbing polymer films. Surface modification was made with an overlayer such as polyaniline ( PANI), which exhibits different optical properties by varying its oxidation state. First, the issue of using transparent substrates for ellipsometry studies was examined and then, spectroscopic ellipsometry was used to characterize absorbing overlayers on transparent glasses. The same methodologies of data analysis can be also applied to other absorbing films on transparent substrates, and deposited by different techniques.

Nanostructured Films Based on Carbon Nanotubes and Cobalt for the Electrocatalytic Reduction of H(2)O(2)

This paper presents the fabrication of a nanothick Co-modified film electrochemically synthesized on layer-by-layer (LbL) structures made with dendrimer polyamidoamine/carbon nanotubes (PAMAM/CNT), and its electrocatalytic properties toward H(2)O(2) reduction. Scanning electron microscopy indicated the formation of a homogeneous, 14 nm thick Co film. The porous nature of the PAMAM/CNT LbL film allowed the electrolyte access to the bottom of the electrode, generating a homogenous Co electrodeposit. In addition, the nanostructure based on Co-modified PAMAM/CNT LbL exhibited high electrocatalytic activity for H(2)O(2) reduction when compared to the Co-free PAMAM/CNT LbL film, which demonstrates the suitability of the system studied for biosensing. (C) 2011 The Electrochemical Society. [DOI: 10.1149/1.3602200] All rights reserved.