Ten tips for reflexive bracketing

Despite the realization that total objectivity is neither achievable nor necessarily desirable in qualitative research, researchers often are required to put aside assumptions so that the true experiences of respondents are reflected in the analysis and reporting of research. In many qualitative publications and conference presentations, researchers report that they have attempted this process, but the means by which this attempt was made often are not explicated. lit this article, the author provides guidance to help qualitative researchers use reflexivity to identify areas of potential bias and to bracket them so their influence on the research process is minimal.

Procedimentos e dinâmicas inerentes ao processo dos concursos públicos e à realização de "empreitadas de obras públicas, em Portugal"

Trabalho de relatório de Estágio de natureza científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Edificações

Débora, qual foi o livro que trouxeste hoje? A potencialidade dos livros na educação pré-escolar

Relatório da UC Seminário de Apoio à Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar

Establishing the main Guidelines for Cast Steel to Produce Truck Parts

Este trabalho foi realizado na Scania CV AB e teve como principal objectivo estabelecer uma diretriz sobre a possível utilização de aços vazados. Existe uma grande necessidade na realização deste trabalho, de forma a apoiar os engenheiros de projecto no seu processo de selecção dos materiais mais adequados, para produzir componentes mais leves e de elevado desempenho. Esta diretriz apresenta informação relacionada com propriedades mecânicas, processos de fundição, vazabilidade, tipologia de defeitos, tratamentos térmicos, soldabilidade e tratamentos superficiais dos aços vazados. Este trabalho foi limitado, na seleção de materiais para componentes do camião, a aços vazados que poderiam ser aplicados em dois componentes específicos: um componente estrutural da carroçaria sujeito a esforços de fadiga e a um colector de gases de combustão, sujeito a fluência, oxidação, fadiga por corrosão, fadiga-térmica e fadiga-mecânica. Foi realizado um benchmark focado nestes dois componentes de forma a saber que materiais são utilizados de momento por outras empresas concorrentes. Foi realizada ainda uma análise sobre possíveis materiais que possam ser aplicados em cada componente referido. Foi conduzida uma caracterização no estado bruto de fundição de um aço inoxidável vazado usado para produzir um protótipo do colector de gases. Esta caracterização consistiu numa análise microestrutural e medição de macro e microdurezas. Além da caracterização inicial, foram aplicados um conjunto de tratamentos térmicos, de forma a estudar a possibilidade de eliminar os carbonetos presentes inicialmente nas fronteiras de grão. As principais conclusões deste trabalho são que o aço vazado apresenta potencial para ser uma escolha válida em diversas aplicações, devido a um leque alargado de propriedades apresentadas tipicamente por este material. Relativamente a aplicações estruturais, o aço vazado é vantajoso comparativamente ao ferro fundido, quando são requeridos, por exemplo, soldabilidade e elevada resistência, combinada com elevada tenacidade à fractura. Para componentes sujeitos a elevadas temperaturas de serviço, o aço inoxidável vazado é vantajoso quando usado a temperaturas superiores a 750°C, apesar do seu elevado custo. O tratamento térmico composto por um recozimento de solubilização seguido de envelhecimento, elimina quase na totalidade os carbonetos presentes nas fronteiras de grão e verifica-se um aumento de dureza através de uma precipitação de carbonetos finamente dispersos na matriz, que poderão também aumentar a resistência à fluência.

Caracterização de fios para aplicação em ortodontia com comportamento superelástico

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

O impacto do perfil do utente da USF durante o seu internamento

RESUMO - Introdução: Através da elaboração do presente projeto de investigação pretendeu-se analisar o que poderá influenciar o custo total de um utente internado, inscrito numa USF, que foi seguidamente internado no setor hospitalar. Recorreu-se à base de dados de uma USF e de um hospital, ambos pertencentes à ARS Alentejo do ano de 2010. O objetivo central consiste em estudar a relação do volume de consultas da USF e se o tipo de admissão no hospital, sendo ela programada ou não programada, explica a variância o custo do internamento. Metodologia: Foi efetuado o cruzamento entre os dados dos utentes inscritos na USF e o total de internamento hospitalar, utilizando a sua data de nascimento e respetivo sexo. Após efetuado o cruzamento, através de um procedimento estatístico com base em SPSS, foram estipuladas pressupostos de forma a encontrar uma associação entre o custo do utente internado com as variáveis da base de dados da USF. De seguida, foi verificado se o tipo de admissão do internamento pode ou não influenciar o custo do internamento. Para efetuar tais correlações, optei por separar a amostra consoante alguns dos seus grupos mais frequentes, em que foi desagregado os internamentos referentes ao GCD 14 – Gravidez, Parto e Puerpério e dos utentes pertencentes ao escalão etários dos idosos (mais de 64 anos). Resultados: A variável da idade do utente é a que mais poderá explicar a variância do custo do internamento, apresentando sempre valores significativos para tal relação. As restantes pouco ou nada podem explicar a variância do custo do internamento. Quanto à tipologia de admissão, o facto de ser programado poderá explicar a diminuição dos dias de internamento, que concomitantemente poderá diminuir o custo do internamento, devido a forte correlação existente entre elas (r=0,666). Conclusão: A introdução da integração dos cuidados de saúde a nível primário e secundário poderá ser a solução base para a redução dos gastos desnecessários na saúde. Um maior acompanhamento do utente nos CSP poderá reduzir a frequência hospitalar, como verificamos que as variáveis da USF e o facto de a consulta ser programada podem explicar tal variância.

Prevalence of mental disorders among sexual offenders and non-sexual offenders

OBJECTIVE: To evaluate the prevalence of mental disorders in convicted sex offenders admitted to the Psychiatric Custody and Treatment Hospital (Forensic Psychiatric Facility). METHOD: 89 patient records of males admitted from March 2005 to August 2006 were analyzed. The analysis included evaluation of two study groups: Group I comprised subjects who had committed sex offenses (sexual offenders) while Group II contained subjects convicted for other crimes (non-sexual offenders). Variables studied were: age bracket, years of schooling, marital status, skin color, place of birth, previous psychiatric admissions and psychiatric diagnosis. RESULTS: Mental retardation and personality disorders were the mainly diagnoses in Group I (sexual offenders) (61,76% and 29,41% respectively). In the other hand, schizophrenic subjects predominated in Group II (non-sexual offenders) (82,93%). CONCLUSION: Different from international data, we have found low prevalence of personality disorders among Brazilian forensic population and we believe that it's due to a distinguishing characteristic of the Brazilian legal system, which does not consider personality disorder a mental disease, thus, not prompting these patients to civil commitment.

Trends in the risk of mortality due to cardiovascular diseases in five Brazilian geographic regions from 1979 to 1996

OBJECTIVE - To analyze the trends in risk of death due to cardiovascular diseases in the northern, northeastern, southern, southeastern, and central western Brazilian geographic regions from 1979 to 1996. METHODS - Data on mortality due to cardiovascular, cardiac ischemic, and cerebrovascular diseases in 5 Brazilian geographic regions were obtained from the Ministry of Health. Population estimates for the time period from 1978 to 1996 in the 5 Brazilian geographic regions were calculated by interpolation with the Lagrange method, based on the census data from 1970, 1980, 1991, and the population count of 1996, for each age bracket and sex. Trends were analyzed with the multiple linear regression model. RESULTS - Cardiovascular diseases showed a declining trend in the southern, southeastern, and northern Brazilian geographic regions in all age brackets and for both sexes. In the northeastern and central western regions, an increasing trend in the risk of death due to cardiovascular diseases occurred, except for the age bracket from 30 to 39 years, which showed a slight reduction. This resulted from the trends of cardiac ischemic and cerebrovascular diseases. The analysis of the trend in the northeastern and northern regions was impaired by the great proportion of poorly defined causes of death. CONCLUSION - The risk of death due to cardiovascular, cerebrovascular, and cardiac ischemic diseases decreased in the southern and southeastern regions, which are the most developed regions in the country, and increased in the least developed regions, mainly in the central western region.

Prevalence of Risk Factors for Coronary Artery Disease in the Brazilian State of Rio Grande do Sul

OBJECTIVE - To determine the risk factors prevalence for coronary artery disease in the State of Rio Grande do Sul, Brazil and to identify their relation with the age bracket. METHODS - We carried out an observational, cross-sectional study of 1,066 adults older than 20 years in the Brazilian State of Rio Grande do Sul. We investigated the risk factors: familial antecedents, systemic arterial hypertension, high levels of cholesterol and glycemia, overweight/obesity, smoking and sedentary lifestyle. A standardized questionnaire completed at the patients' dwellings by health agents were used; the data were stored in an EPI-INFO software database. The results were expressed with a 95% confidence interval. RESULTS - The sample composition was of 51.8% females. The risk factors prevalences were: 1) sedentary lifestyle 71.3%; 2) familial antecedents: 57.3%; 3) overweight/obesity (body mass index >25): 54.7%; 4) smokers: 33.9%; 5) hypertension: 31.6% (considering >140/90mmHg) and 14.4% (considering >160/95mmHg); 6) high glycemia (>126 mg/dL): 7%; 7) high cholesterol >240 mg/dL): 5.6%. CONCLUSION - The prevalence of the major risk factors for coronary artery disease in the Brazilian state of Rio Grande do Sul could be determined in a study that integrated public and private institutions.

Schistosomiasis mansoni in Bananal (State of São Paulo, Brazil): I. Efficiency of diagnostic and treatment procedures

Bananal is an important focus of Schistosoma mansoni in the State of São Paulo. Accordingly, programmed active search for human cases, annual coproscopic surveys and treatment of infected cases were started in 1998, aiming at producing a sharp prevalence rate drop by the year 2000. S. mansoni eggs were searched for in two Kato-Katz slides per patient. Cases were followed up according to the routine of the local Family Health Program. In 1998, 130 samples out of 3,860 showed S. mansoni eggs; in 1999, 105 out of 3,550, and in 2000, 64 out of 3,528. Prevalence rates were 3.4%, 2.9%, and 1.8%, and average egg-counts 59, 64, and 79 eggs per gram of feces respectively. Prevalence rates decreased steadily after treatment, but persistently positive cases showed no significant decrease in parasite burdens. Egg count variation depended on sex and age bracket. Persistent residual cases admittedly preclude the eradication of this infection by only searching for and treating carriers. In addition, resistance to therapy and low sensitivity of fecal examinations, can not be ignored. Moderate to heavy worm burdens, frequently associated with hepatomegaly elsewhere, produced no serious cases in Bananal.

El Misterio de la biblioteca Mil.lènium o cómo promover relaciones colaborativas desde la participación del alumnado = The Mystery of the Mil.lènium Library: How to Promote Collaborative Relationships Through Student Participation

La pedagogía crítica acentúa la falta de neutralidad de la escuela respecto a las relaciones de poder que existen en la sociedad. Su propuesta consiste en modificar las relaciones de poder en el aula en el sentido de transformar las relaciones coercitivas –las que reproducen las relaciones existentes– en relaciones colaborativas partiendo del reconocimiento y la participación de los alumnos en las actividades escolares. Desde esta perspectiva, uno de los objetivos de las actividades es que los niños produzcan «textos identitarios», entendidos como artefactos que los alumnos se pueden apropiar para promover su desarrollo cognitivo. El artículo muestra el trabajo educativo integrado desde Educación Infantil hasta 6.º de Primaria de una escuela de la provincia de Girona en la que el 97% de los alumnos es de origen extranjero y cuyo propósito es incrementar las habilidades lingüísticas orales y escritas en la lengua escolar, así como la utilización de otros lenguajes multimedia. La unidad didáctica consiste en la elaboración de un cuento a lo largo de un curso escolar por parte de todo el alumnado con la ayuda de los profesores, de dos autores y de tres ilustradores. Cada ciclo escolar decide los personajes y el escenario y explicita textualmente el transcurso de la acción. Los ilustradores producen las imágenes y los autores posibilitan la transición de aquello que ha elaborado un ciclo al producto del siguiente. La actividad basada en la participación y la utilización de procedimientos democráticos de decisión se inserta en la propuesta educativa y lingüística de la escuela, así como en sus concreciones curriculares. Los resultados muestran que los textos construidos por los niños se apoyan en sus «fondos de conocimiento» sociales y familiares y constituyen una fuente de progreso en la consecución de las competencias básicas y en la construcción de valores democráticos

Fact-sheet National Comparison of Jointly Enrolled Students, February 3, 2015

This fact sheet attempts to address the following question: where does Iowa rank nationally in terms of the enrollment of high school students in post-secondary coursework? The division gathered national statistics from the Integrated Post-secondary Education Data System (IPEDS) on the age of the enrolled student population at two–year and four-year public institutions during the fall of 2013. The division utilized the percent of students under the age of 18 as a proxy for joint enrollment since most high school students would fall into this age bracket.

Effect of water contamination on the shear bond strength of five orthodontic adhesives

Objectives: To evaluate the shear bond strength and site of failure of brackets bonded to dry and wet enamel. Study design: 50 teeth were divided into ten groups of 5 teeth each (10 surfaces). In half the groups enamel was kept dry before bonding, and in the other half distilled water was applied to wet the surface after etching. The following groups were established: 1)Acid/Transbond-XT (dry/wet) XT; 2) Transbond Plus Self Etching Primer (TSEP)/Transbond-XT paste (dry/wet); 3) Concise (dry), Transbond MIP/Concise (wet), 4) FujiOrtho-LC (dry/wet); 5) SmartBond (dry/wet). Brackets were bonded to both buccal and lingual surfaces. Specimens were stored in distilled water (24 hours at 37ºC) and thermocycled. Brackets were debonded using a Universal testing machine (cross-head speed 1 mm/min). Failure sites were classified using a stereomicroscope. Results: No significant differences in bond strength were detected between the adhesives under wet and dry conditions except for Smart- Bond, whose bond strength was significantly lower under dry conditions. For all the adhesives most bond failures were of mixed site location except for Smartbond, which failed at the adhesive-bracket interface. Conclusions: Under wet conditions the bonding capacity of the adhesives tested was similar than under dry conditions, with the exception of SmartBond which improved under wet conditions

Paperikoneiden työskentelytasojen vaatimusten mukainen suunnittelu

Työtasojen kantavien rakenteiden on kestettävä riittävällä varmuudella mm. henkilökuormasta aiheutuvat jännitykset rakenneosissa. Lisäksi tasot eivät saa tuntua notkuvilta niillä käveltäessä, joten rakenteen siirtymille asetetaan rajoituksia. Työssä esitetään yleisimmin epäselvyyttä aiheuttaneet paperikoneiden työskentelytasoille asetetut vaatimukset. Vaatimukset ja niiden täyttäminen esitetään yksiselitteisellä tavalla esimerkiksi sovellettavien kuormitusten osalta. Materiaaliominaisuuksien osalta esitetään tärkeimmät työtasojen suunnittelussa huomioon otettavat asiat yleisimmille austeniittisille ruostumattomille teräksille ja alumiiniseoksille. Työtasorakenteiden mitoitusohjeet esitetään ritilöille, kulmaprofiilista valmistetuille jalkalistoille ja putkipalkista valmistetuille työtasojen kannattimille. Mitoituksessa otetaan myötöehdon ja siirtymärajoitusten lisäksi huomioon mm. levykenttien lommahdus. Kannattimien mitoituksessa otetaan huomioon vinoutuvien liitosten joustavuus ja kestävyys. Lisäksi esitetään mitoitusohjeet kitkaliitoksena toimivalle päätylevyliitokselle, johon kohdistuu mm. taivutus- ja vääntömomenttia.

Fatigue analysis of brackets with and without scallop for bridge and other deck structure using effective notch stress.

Due to functional requirement of a structural detail brackets with and without scallop are frequently used in bridges, decks, ships and offshore structure. Scallops are designed to serve as passage way for fluids, to reduce weld length and plate distortions. Moreover, scallops are used to avoid intersection of two or more welds for the fact that there is the presence of inventible inherent initial crack except for full penetrated weld and the formation of multi-axial stress state at the weld intersection. Welding all around the scallop corner increase the possibility of brittle fracture even for the case the bracket is not loaded by primary load. Avoiding of scallop will establish an initial crack in the corner if bracket is welded by fillet welds. If the two weld run pass had crossed, this would have given a 3D residual stress situation. Therefore the presences and absence of scallop necessitates the 3D FEA fatigue resistance of both types of brackets using effective notch stress approach ( ). FEMAP 10.1 with NX NASTRAN was used for the 3D FEA. The first and main objective of this research was to investigate and compare the fatigue resistance of brackets with and without scallop. The secondary goal was the fatigue design of scallops in case they cannot be avoided for some reason. The fatigue resistance for both types of brackets was determined based on approach using 1 mm fictitiously rounded radius based on IIW recommendation. Identical geometrical, boundary and loading conditions were used for the determination and comparison of fatigue resistance of both types of brackets using linear 3D FEA. Moreover the size effect of bracket length was also studied using 2D SHELL element FEA. In the case of brackets with scallop the flange plate weld toe at the corner of the scallop was found to exhibit the highest and made the flange plate weld toe critical for fatigue failure. Whereas weld root and weld toe at the weld intersections were the highly stressed location for brackets without scallop. Thus weld toe for brackets with scallop, and weld root and weld toe for brackets without scallop were found to be the critical area for fatigue failure. Employing identical parameters on both types of brackets, brackets without scallop had the highest except for full penetrated weld. Furthermore the fatigue resistance of brackets without scallop was highly affected by the lack of weld penetration length and it was found out that decreased as the weld penetration was increased. Despite the fact that the very presence of scallop reduces the stiffness and also same time induce stress concentration, based on the 3D FEA it is worth concluding that using scallop provided better fatigue resistance when both types of brackets were fillet welded. However brackets without scallop had the highest fatigue resistance when full penetration weld was used. This thesis also showed that weld toe for brackets with scallop was the only highly stressed area unlike brackets without scallop in which both weld toe and weld root were the critical locations for fatigue failure when different types of boundary conditions were used. Weld throat thickness, plate thickness, scallop radius, lack of weld penetration length, boundary condition and weld quality affected the fatigue resistance of both types of brackets. And as a result, bracket design procedure, especially welding quality and post weld treatment techniques significantly affect the fatigue resistance of both type of brackets.