3D locomotion biomimetic robot fish with haptic feedback

This thesis developed a biomimetic robot fish and built a novel haptic robot fish system based on the kinematic modelling and three-dimentional computational fluid dynamic (CFD) hydrodynamic analysis. The most important contribution is the successful CFD simulation of the robot fish, supporting users in understanding the hydrodynamic properties around it.

Simulation of robot manipulator control strategies

The high capital cost of robots prohibit their economic application. One method of making their application more economic is to increase their operating speed. This can be done in a number of ways e.g. redesign of robot geometry, improving actuators and improving control system design. In this thesis the control system design is considered. It is identified in the literature review that two aspects in relation to robot control system design have not been addressed in any great detail by previous researchers. These are: how significant are the coupling terms in the dynamic equations of the robot and what is the effect of the coupling terms on the performance of a number of typical independent axis control schemes?. The work in this thesis addresses these two questions in detail. A program was designed to automatically calculate the path and trajectory and to calculate the significance of the coupling terms in an example application of a robot manipulator tracking a part on a moving conveyor. The inertial and velocity coupling terms have been shown to be of significance when the manipulator was considered to be directly driven. A simulation of the robot manipulator following the planned trajectory has been established in order to assess the performance of the independent axis control strategies. The inertial coupling was shown to reinforce the control torque at the corner points of the trajectory, where there was an abrupt demand in acceleration in each axis but of opposite sign. This reduced the tracking error however, this effect was not controllable. A second effect was due to the velocity coupling terms. At high trajectory speeds it was shown, by means of a root locus analysis, that the velocity coupling terms caused the system to become unstable.

Wave impedance selection for passivity-based bilateral teleoperation

When a task must be executed in a remote or dangerous environment, teleoperation systems may be employed to extend the influence of the human operator. In the case of manipulation tasks, haptic feedback of the forces experienced by the remote (slave) system is often highly useful in improving an operator's ability to perform effectively. In many of these cases (especially teleoperation over the internet and ground-to-space teleoperation), substantial communication latency exists in the control loop and has the strong tendency to cause instability of the system. The first viable solution to this problem in the literature was based on a scattering/wave transformation from transmission line theory. This wave transformation requires the designer to select a wave impedance parameter appropriate to the teleoperation system. It is widely recognized that a small value of wave impedance is well suited to free motion and a large value is preferable for contact tasks. Beyond this basic observation, however, very little guidance exists in the literature regarding the selection of an appropriate value. Moreover, prior research on impedance selection generally fails to account for the fact that in any realistic contact task there will simultaneously exist contact considerations (perpendicular to the surface of contact) and quasi-free-motion considerations (parallel to the surface of contact). The primary contribution of the present work is to introduce an approximate linearized optimum for the choice of wave impedance and to apply this quasi-optimal choice to the Cartesian reality of such a contact task, in which it cannot be expected that a given joint will be either perfectly normal to or perfectly parallel to the motion constraint. The proposed scheme selects a wave impedance matrix that is appropriate to the conditions encountered by the manipulator. This choice may be implemented as a static wave impedance value or as a time-varying choice updated according to the instantaneous conditions encountered. A Lyapunov-like analysis is presented demonstrating that time variation in wave impedance will not violate the passivity of the system. Experimental trials, both in simulation and on a haptic feedback device, are presented validating the technique. Consideration is also given to the case of an uncertain environment, in which an a priori impedance choice may not be possible.

Air vehicle simulator : An application for a cable array robot

The development of autonomous air vehicles can be an expensive research pursuit. To alleviate some of the financial burden of this process, we have constructed a system consisting of four winches each attached to a central pod (the simulated air vehicle) via cables - a cable-array robot. The system is capable of precisely controlling the three dimensional position of the pod allowing effective testing of sensing and control strategies before experimentation on a free-flying vehicle. In this paper, we present a brief overview of the system and provide a practical control strategy for such a system. ©2005 IEEE.

Automatic calibration of a spiking head-direction network for representing robot orientation

Calibration of movement tracking systems is a difficult problem faced by both animals and robots. The ability to continuously calibrate changing systems is essential for animals as they grow or are injured, and highly desirable for robot control or mapping systems due to the possibility of component wear, modification, damage and their deployment on varied robotic platforms. In this paper we use inspiration from the animal head direction tracking system to implement a self-calibrating, neurally-based robot orientation tracking system. Using real robot data we demonstrate how the system can remove tracking drift and learn to consistently track rotation over a large range of velocities. The neural tracking system provides the first steps towards a fully neural SLAM system with improved practical applicability through selftuning and adaptation.

Haptic Feedback for Injecting Biological Cells using Miniature Compliant Mechanisms

We present a real-time haptics-aided injection technique for biological cells using miniature compliant mechanisms. Our system consists of a haptic robot operated by a human hand, an XYZ stage for micro-positioning, a camera for image capture, and a polydimethylsiloxane (PDMS) miniature compliant device that serves the dual purpose of an injecting tool and a force-sensor. In contrast to existing haptics-based micromanipulation techniques where an external force sensor is used, we use visually captured displacements of the compliant mechanism to compute the applied and reaction forces. The human hand can feel the magnified manipulation force through the haptic device in real-time while the motion of the human hand is replicated on the mechanism side. The images are captured using a camera at the rate of 30 frames per second for extracting the displacement data. This is used to compute the forces at the rate of 30 Hz. The force computed in this manner is sent at the rate of 1000 Hz to ensure stable haptic interaction. The haptic cell-manipulation system was tested by injecting into a zebrafish egg cell after validating the technique at a size larger than that of the cell.

Control de un sistema de accionamientos de traslación basado en correa para un manipulador de cinemática paralela

[ES]Este Trabajo de Fin de Grado “Control de un sistema de accionamientos de traslación basado en correa para un manipulador de cinemática paralela” tiene como objetivo principal la implementación de un sistema de control que nos permita manejar un manipulador de cinemática paralela de dos grados de libertad accionado mediante dos motores eléctricos de corriente continua. Como componente central de este sistema de control, se dispondrá de un ordenador portátil cuyo procesador será el encargado de ejecutar las acciones necesarias para que pueda llevarse a cabo esta actividad de control. De esta forma, la tarea más importante y laboriosa a llevar cabo en este proyecto será el desarrollo de un aplicación de control que, corriendo en el citado ordenador, permitirá al usuario manejar el manipulador de cinemática paralela en cuestión. Para ello, esta aplicación deberá ser capaz de interpretar las ordenes de movimiento dadas por el usuario y transmitirlas al procesador del mencionado ordenador. Además de todo lo anterior, para completar el desarrollo del sistema de control, será necesaria la implementación de diversos sensores que se encargarán de detectar y transmitir las señales necesarias para evitar situaciones de emergencia en el que el manipulador estuviese a punto de chocar con algún objeto o persona. En conclusión, mediante el cumplimiento de los objetivos de este Trabajo de Fin de Grado, se va a disponer de un sistema de control sencillo, intuitivo y fácilmente operable, que va a permitir a cualquier futuro usuario del mismo el manejo de un robot de cinemática paralela.

Dynamical Systems in the Sensorimotor Loop: On the Interrelation Between Internal and External Mechanisms of Evolved Robot Behavior

Huelse, M., Wischmann, S., Manoonpong, P., Twickel, A.v., Pasemann, F.: Dynamical Systems in the Sensorimotor Loop: On the Interrelation Between Internal and External Mechanisms of Evolved Robot Behavior. In: M. Lungarella, F. Iida, J. Bongard, R. Pfeifer (Eds.) 50 Years of Artificial Intelligence, LNCS 4850, Springer, 186 - 195, 2007.

TIGRE - An autonomous ground robot for outdoor exploration

13th International Conference on Autonomous Robot Systems (Robotica), 2013

Efficient learning of reactive robot behaviors with a Neural-Q_learning approach

The purpose of this paper is to propose a Neural-Q_learning approach designed for online learning of simple and reactive robot behaviors. In this approach, the Q_function is generalized by a multi-layer neural network allowing the use of continuous states and actions. The algorithm uses a database of the most recent learning samples to accelerate and guarantee the convergence. Each Neural-Q_learning function represents an independent, reactive and adaptive behavior which maps sensorial states to robot control actions. A group of these behaviors constitutes a reactive control scheme designed to fulfill simple missions. The paper centers on the description of the Neural-Q_learning based behaviors showing their performance with an underwater robot in a target following task. Real experiments demonstrate the convergence and stability of the learning system, pointing out its suitability for online robot learning. Advantages and limitations are discussed

A Multi-agent Architecture with Distributed Coordination for an Autonomous Robot

Aquest treball proposa una nova arquitectura de control amb coordinació distribuïda per a un robot mòbil (ARMADiCo). La metodologia de coordinació distribuïda consisteix en dos passos: el primer determina quin és l'agent que guanya el recurs basat en el càlcul privat de la utilitat i el segon, com es fa el canvi del recurs per evitar comportaments abruptes del robot. Aquesta arquitectura ha estat concebuda per facilitar la introducció de nous components hardware i software, definint un patró de disseny d'agents que captura les característiques comunes dels agents. Aquest patró ha portat al desenvolupament d'una arquitectura modular dins l'agent que permet la separació dels diferents mètodes utilitzats per aconseguir els objectius, la col·laboració, la competició i la coordinació de recursos. ARMADiCo s'ha provat en un robot Pioneer 2DX de MobileRobots Inc.. S'han fet diversos experiments i els resultats han demostrat que s'han aconseguit les característiques proposades per l'arquitectura.

Real-Time software control of neural stimulation in a closed loop Animat system

A recent area for investigation into the development of adaptable robot control is the use of living neuronal networks to control a mobile robot. The so-called Animat paradigm comprises a neuronal network (the ‘brain’) connected to an external embodiment (in this case a mobile robot), facilitating potentially robust, adaptable robot control and increased understanding of neural processes. Sensory input from the robot is provided to the neuronal network via stimulation on a number of electrodes embedded in a specialist Petri dish (Multi Electrode Array (MEA)); accurate control of this stimulation is vital. We present software tools allowing precise, near real-time control of electrical stimulation on MEAs, with fast switching between electrodes and the application of custom stimulus waveforms. These Linux-based tools are compatible with the widely used MEABench data acquisition system. Benefits include rapid stimulus modulation in response to neuronal activity (closed loop) and batch processing of stimulation protocols.

A haptically enabled low-cost reconnaissance platform for law enforcement

Traditionally, the control system of a modern teleoperated mobile robot consists of one or more two-dimensional joysticks placed on a control interface. While this simplistic interface allows an operator to remotely drive the platform, feedback is limited to visual information supplied by on-board cameras. Significant advances in the field of haptics have the potential to meaningfully enhance situational awareness of a remote robot. The focus of this research is the augmentation of Deakin University's OzBot trade MkIV mobile platform to include haptic control methodologies. Utilising the platform's inertial measurement unit, a remote operator has the ability to gain knowledge of the vehicle's operating performance and terrain while supplying a finer level of control to the drive motors. Our development of a generic multi-platform ActiveX allows the easy implementation of haptic force feedback to many computer based robot controllers. Furthermore, development of communication protocols has progressed with Joint Architecture for Unmanned Systems (JAUS) compliance in mind. The haptic force control algorithms are presented along with results highlighting the benefits of haptic operator feedback on the MklV OzBot trade chassis.

A survey of control architectures for autonomous mobile robots

MEDEIROS, Adelardo A. D.A survey of control architectures for autonomous mobile robots. J. Braz. Comp. Soc., Campinas, v. 4, n. 3, abr. 1998 .Disponível em: Acesso: 27 set. 2010.