Electric paralyzation and reduction of weight loss in the processing of round-cooked spiny lobsters

This study proposes alternatives to the current methods of processing round-cooked lobster. The paralyzation of lobsters with direct electric shock consumes 10.526 x 10-3 kWh, which is significantly less than the 11 kWh required by the traditional thermal-shock method (based on 60 kg of lobsters). A better weight gain was obtained by immersion of paralyzed lobsters in brine before cooking. Systematic trials combining 3, 6, or 9% brine concentrations with immersion periods of 15, 30, or 45 minutes were performed in order to determine the best combinations. A mathematical model was designed to predict the weight gain of lobsters of different sizes in any combination of treatments. For small lobsters, a 45 minutes immersion in 6% brine gave the best response in terms of weight gain (4.7%) and cooking produced a weight loss of only 1.34% in relation to fresh lobster weight. For medium-sized lobsters, a 45 minutes immersion in 9% brine produced a weight gain of 2.64%, and cooking a weight gain of 1.08%. For large lobsters, a 45 minutes immersion in 6% brine produced a weight gain of 3.87%, and cooking a weight gain of 1.62%.

Arsenic and germanium determination by hydride generation in the D.C. plasma optical emission spectrometer

Modifications to the commercial hydride generator, manufactured by Spectrametrics, resulted in improved operating procedure and enhancement of the arsenic and germanium signals. Experiments with arsenic(III) and arsenic(V) showed that identical reiults could be produced from both oxidation states. However, since arsenic(V) is reduced more slowly than arsenic(III), peak areas and not peak heights must be measured when the arsine is immediately stripped from the system (approximately 5 seconds reaction). When the reduction is allowed to proceed for 20 seconds before the arsine is stripped, peak heights may be used. For a 200 ng/mL solution, the relative standard deviation is 2.8% for As(III) and 3.8% for As(V). The detection limit for arsenic using the modified system is 0.50 ng/mL. Studies performed on As(V) standards show that the interferences from 1000 mg/L of nickel(II), cobalt(II), iron(III), copper(II), cadmium(II), and zinc(II) can be eliminated with the aid of 5 M Hel and 3% L-cystine. Conditions for the reduction of germanium to the corresponding hydride were investigated. The effect of different concentrations of HCl on the reduction of germanium to the covalent hydride in aqueous media by means of NaBH 4 solutions was assessed. Results show that the best response is accomplished at a pH of 1.7. The use of buffer solutions was similarly characterized. In both cases, results showed that the element is best reduced when the final pH of the solution after reaction is almost neutral. In addition, a more sensitive method, which includes the use of (NH4)2S208' has been developed. A 20% increase in the germanium signal is registered when compared to the signal achieved with Hel alone. Moreover, under these conditions, reduction of germanium could be accomplished, even when the solution's pH is neutral. For a 100 ng/mL germanium standard the rsd is 3%. The detection limit for germanium in 0.05 M Hel medium (pH 1.7) is 0.10 ng/mL and 0.09 ng/mL when ammonium persulphate is used in conjunction with Hel. Interferences from 1000 mg/L of iron(III), copper(II), cobalt(II), nickel(II), cadmium(II), lead(II), mercury(II), aluminum(III), tin(IV), arsenic(III), arsenic(V) and zinc(II) were studied and characterized. In this regard, the use of (NH4)ZS20S and Hel at a pH of 1.7 proved to be a successful mixture in the sbppression of the interferences caused by iron, copper, aluminum, tin, lead, and arsenic. The method was applied to the determination of germanium in cherts and iron ores. In addition, experiments with tin(IV) showed that a 15% increase in the tin signal can be accomplished in the presence of 1 mL of (NH4)2S20S 10% (m/V).

Central Banks in Times of Crisis: The FED vs. the ECB. CEPS Policy Brief No. 276, 11 July 2012,

Different economic and financial structures require different crisis responses. Different crises also require different tools and resources. The first ‘stage’ of the financial crisis (2007-09) was similar on both sides of the Atlantic, and the response was also quite similar. The second stage of the crisis is unique to the euro area. Increasing financial disintegration within the region has forced the ECB to become the central counterparty for the entire cross-border banking market and to intervene in the sovereign bond market of some stressed countries. The actions undertaken by the European Central Bank (ECB), however, have not always represented the best response, in terms of effectiveness, consistency and transparency. This is especially true for the Securities Markets Programme (SMP): by de facto imposing its absolute seniority during the Greek PSI (private sector involvement), the ECB has probably killed its future effectiveness.

Synthesis Optimization of Hydroxymethylnitrofurazone, an Antichagasic Candidate, Using 3(2) Factorial Design

Hydroxymethylnitrofurazone presents in vitro activity against Trypanosoma cruzi. The optimization of the synthesis of this compound was performed through a 3(2) factorial statistical design. Quadratic model produced the best response surface predicting a maximum yield (82%) close to the center design point with a seven hours reaction and a 1:1.5 (NF:K(2)CO(3)) ratio.

Development and Application of a Highly Selective Biomimetic Sensor for Detection of Captopril, an Important Ally in Hypertension Control

A biomimetic sensor is proposed as a promising new analytical method for determination of captopril in different classes of samples. The sensor was prepared by modifying a carbon paste electrode with iron (II) phthalocyanine bis(pyridine) [FePe(dipy)] complex. Amperometric measurements in a batch analytical mode were first carried out in order to optimize the sensor response. An applied potential lower than 0.2 V vs Ag vertical bar AgCl in 0.1 mol L(-1) of TRIS buffer at pH 8.0 provided the best response, with a linear range of 2.5 x 10(-5) to 1.7 x 10(-4) mol L(-1). A detailed investigation of the selectivity of the sensor, employing seventeen other drugs, was also performed. Recovery studies were carried out using biological and environment samples in order to evaluate the sensor`s potential for use with these sample classes. Finally, the performance of the biomimetic sensor was optimized in a flow injection (FIA) system using a wall jet electrochemical cell. Under optimized flow conditions, a broad linear response range, from 5.0 x 10(-4) to 2.5 x 10(-2) mol L(-1), was obtained for captopril, with a sensitivity of 210 +/- 1 mu A L mol(-1).

Courts as healthcare policy-makers: the problem, the responses to the problem and problems in the responses

This article starts by analysing healthcare litigation in Brazil by means of a literature review of articles that contribute with empirical findings on this phenomenon. Based on this review, I argue that health care litigation in Brazil makes the public health system less fair and rational. In the second part of this article, I discuss the three most overarching responses to control the level of litigation and its impact on the public health system: (i) the public hearing held by the Supreme Federal Court and the criteria the court established thereafter; (ii) the recommendations by the National Council of Justice aimed at building courts’ institutional capacity; and (iii) the enactment of the Federal Law 12.401/11, which created a new health technology assessment system. I argue that latter is the best response because it keeps the substantive decisions on the allocation of healthcare resources in the institution that is in the best position to make them. Moreover, this legislation will make the decisions about provision of health treatments more explicit, making easier for courts to control the procedure and the reasons for these decisions.

Mid-auction information acquisition

This paper studies a model of a sequential auction where bidders are allowed to acquire further information about their valuations of the object in the middle of the auction. It is shown that, in any equilibrium where the distribution of the final price is atornless, a bidder's best response has a simple characterization. In particular, the optimal information acquisition point is the same, regardless of the other bidders' actions. This makes it natural to focus on symmetric, undominated equilibria, as in the Vickrey auction. An existence theorem for such a class of equilibria is presented. The paper also presents some results and numerical simulations that compare this sequential auction with the one-shot auction. 8equential auctions typically yield more expected revenue for the seller than their one-shot counterparts. 80 the possibility of mid-auction information acquisition can provide an explanation for why sequential procedures are more often adopted.

Anticorpos contra Leptospira spp em bovinos leiteiros vacinados com bacterina polivalente comercial: perfil sorológico frente a dois esquemas de vacinação

Mediante a utilização da prova de soroaglutinação microscópica (SAM), foi pesquisada a indução de anticorpos contra leptospira em bovinos vacinados com uma bacterina polivalente comercial. Procurou-se avaliar a resposta sorológica homóloga frente a dois esquemas de vacinação. Os animais utilizados foram fêmeas adultas em produção leiteira oriundas de seis propriedades da região noroeste do Estado de São Paulo. Vinte animais de cada propriedade foram escolhidos após três exames sorológicos com 24 sorovares de leptospiras com intervalo de 20 dias, através de triagem sorológica com 24 antígenos de leptospiras. Os grupos foram constituídos de animais não reagentes (I, II e III) e animais reagentes (IV, V e VI). Posteriormente os animais foram subdivididos em grupos controle (I e IV), os que receberam somente uma dose de vacina (II e V) e que receberam duas uma doses de vacina com e dose de reforço após 30 dias (III e VI). Os animais foram monitorados por meio da SAM nos dias 0, 15, 30, 45 e 60 após a primeira aplicação da vacina. Os resultados obtidos revelaram que não houve diferença significativa (p>0,05) entre os animais vacinados e não vacinados. Não houve diferença significativa (p>0,05) nas respostas de títulos vacinais com relação ao perfil sorológico apresentados pelos animais. A vacinação com reforço apresentou melhor desempenho e a indução produção de aglutininas somente ocorreu contra os sorovares hardjo, wolffi, icterohaemorrhagiae e pomona. Há a necessidade de maiores estudos sobre o poder imunogênico da vacina utilizada no experimento.

Qualidade fisiológica de sementes de milho tratadas com molibdênio

O tratamento de sementes com micronutrientes, como o molibdênio, garante uma maior uniformidade de aplicação, sendo que, a quantidade a ser aplicada desse elemento nas sementes deve ser suficiente para provir à exigência para o desenvolvimento e produção da cultura. Assim, objetivou-se com o presente trabalho avaliar a qualidade fisiológica de sementes de milho tratadas com molibdênio. A qualidade das sementes foi avaliada por meio da determinação do teor de água, do teste de germinação, da primeira contagem de germinação e da emissão de raízes primárias. Os tratamentos testados consistiram de cinco híbridos (DOW CO32; DOW 2B587; DOW 2B688; PIONEER 30F35 e PIONEER 30K73) e cinco doses de molibdênio aplicadas via semente (0; 7,5; 22,5; 67,5; 202,5 g ha-1 de molibdênio). A fonte de molibdênio utilizada foi o molibdato de sódio dihidratado (39% de molibdênio), sendo que a aplicação do molibdênio foi efetuada por meio da mistura com o fungicida líquido de suspensão concentrada carboxina+thiram sobre as sementes. A qualidade fisiológica das sementes de milho é influenciada negativamente por doses crescentes de molibdênio aplicadas. O híbrido de milho DOW 2B587 obteve melhor resposta à aplicação da maior dose de molibdênio em relação aos demais híbridos estudados.

Comparação entre metodologias de extração de HPAs em água utilizando um planejamento fatorial com quantificação no CG/EM

PAHs (Polycyclic Aromatic Hydrocarbons) are a group of organic substances which receive considerable attention because of the carcinogenic and mutagenic properties of some of them. It is therefore important to determine the PAHs in different environmental matrices. Several studies have shown the use of gas chromatography coupled to mass spectrometry as a technique for quantification of PAHs by presenting excellent detection limits. This study aimed to develop an analytical methodology for the determination of 16 PAHs listed by the USEPA, test two methods for extraction of PAHs in water from a 23 factorial design, quantify them through the analytical technique coupled to gas chromatography mass spectrometry (GC/MS) using the method developed, and finally apply the results in chemometrics. The sample was synthesized and subjected to tests of the 23 factorial design, which has the factors: the type of extraction technique (ultrasound and digester), the ratio solvent / sample (1:1 and 1:3) and the type of solvent (dichloromethane / hexane and acetone / dichloromethane). The responses of eight combinations of the factorial design were obtained from the quantification by external calibration in GC/MS. The quantification method was developed from an optimized adaptation of the USEPA Method 8270. We used the full scan mode as a way of acquiring the mass spectra of 16 PAHs. The time in which the samples were subjected to ultrasound was fixed at 10 min and held an investigation to establish the conditions of power and time in the digester. We had the best response in the investigation of the digester power of 100 watts and the time of six minutes. The factorial design of liquid-liquid extraction showed that the most representative factors were: the use of the digester as extraction technique, the ratio solvent / sample 1:1 and the use of a 1:1 mixture of dichloromethane / hexane as a solvent more suitable. These results showed that the 1:1 mixture of dichloromethane / hexane is an excellent mixture to recover the extraction of PAHs an aqueous sample using the microwave digester. The optimization of the method of separation, identification and quantification of PAHs in the GC/MS was valid for 16 PAHs present in each chromatogram of the samples

Comparison among three approaches for evaluation of sexual precocity in Nellore cattle

Restricted breeding seasons used in beef cattle produce censored data for reproduction traits measured in regard to these seasons. To analyze these data, adequate methods must be used. The objective of this paper was to compare three approaches aiming to evaluate sexual precocity in Nellore cattle. The final data set contained 6699 records of age at first conception (AFC14) (in days) and of heifer pregnancy (HP14) (binary) obtained from females exposed to the bulls for the first time at about 14 months of age. Records of females that did not calve in the following year after being exposed to a sire were considered censored (77.5% of total). The models used to obtain genetic parameters and expected progeny differences (EPDs) were a Weibull mixed and a censored linear model for AFC14 and threshold model for HP14. The mean heritabilities obtained were 0.76 and 0.44, respectively, for survival and censored linear models (for AFC14), and 0.58 for HP14. Ranking and Pearson correlations varied (in absolute values) from 0.54 to 0.99 (considering different percentages of sires selected), indicating moderate changes in the classification. Considering survival analysis as the best selection criterion (that would result in the best response to selection), it was observed that selection for HP14 would lead to a more significant decrease in selection response if compared with selection for AFC14 analysed by censored linear model, from which results were very similar to the survival analysis.

A new amperometric biosensor for salicylate based on salicylate hydroxylase immobilized on polipyrrole film doped with hexacyanoferrate

An amperometric biosensor for salicylate detection was developed by immobilizing salicylate hydroxylase via glutaraldehyde onto a polypyrrole film doped with hexacyanoferrate, supported on a glassy carbon electrode surface. The sensor monitors the catechol produced in the enzymatic reaction on the film surface, at an applied potential of 150 mV vs. SCE. A [NADH]/[salicylate] ratio between 2 and 4 gave the best response. The biosensor presented the best performance in a solution with pH=7.4. The response time was about 40 s. A linear range of response was observed for salicylate concentrations between 1.0x10(-5) and 1.0x10(-4) mol l(-1) and the equation adjusted for this curve was I=(-0.04+/-0.01)+(11.4+/-0.2)[salicylate] with a correlation coefficient of 0.999 for n=6. The biosensor retains its activity for at least 10 days despite daily use. The results obtained using the biosensor for salicylate determination, in three different samples of antithermic drugs, presented a good correlation with the standard colorimetric method.

Qualidade tecnológica da cana-de-açúcar sob adubação com torta de filtro enriquecida com fosfato solúvel

The study had the objective to evaluate the effect of the fertilization with filter cake enriched with soluble phosphate on the sugar yield. The experiment carried at Presidente Prudente-SP, used a randomized complete block design, in the factorial scheme 5 x 4, where the first factor consisted of doses of filter cake (0; 0.5; 1.0; 2.0 and 4.0 t ha(-1)) and the second, doses of phosphorus fertilizer (0, 50, 100, 200 kg ha(-1) of P2O5), with 4 replicates, totaling 80 plots. The results indicated that phosphorus applied in planting furrows improves the quality of sugarcane raw matter by increasing the levels of soluble solids, total reducing sugars and sucrose in the stalks. The phosphorus also increases the productivity of sugar. The filter cake applied in planting furrow has the potential to partially replace the chemical fertilization with phosphate aiming to improve the quality and the productivity of sugar. The best combination was filter cake at dose between 2.6 and 2.7 t ha(-1) combined with dose between 160 and 190 kg P2O5 ha(-1) for obtaining best response of soluble solids and productivity of sugar.

Development and application of a highly selective biomimetic sensor for detection of captopril, an important ally in hypertension control

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Voltammetric determination of ethyl acetate in ethanol fuel using a Fe 3+/Nafion®-coated glassy carbon electrode

A voltammetric method for the determination of ethyl acetate in ethanol fuel using a Fe3+/Nafion®-coated glassy carbon electrode (GCE) is proposed. The ethyl acetate present in the ethanol fuel was previously converted to acetohydroxamic acid via pretreatment with hydroxylamine chloride. The acetohydroxamic acid promptly reacted with the iron (III) present in the film, producing iron (III) acetohydroxamate, which presents a well-defined voltammetric peak current at -0.02 V. Optimization of the voltammetric parameters for the cyclic, linear sweep, square wave, and differential pulse modalities was carried out for this chemically-modified electrode. Square wave voltammetry afforded the best response for acetohydroxamic acid detection. The analytical curve for this species was linear from 9 to 100 μmol L 1 according to the following equation: ip (μA) = 0.27 + 2.55Cacetohydroxamic acid (μmol L 1), with linear correlation coefficient equal to 0.993. The technique presented limit of detection equal to 5.3 μmol L 1 and quantification limit of 17.6 μmol L 1. The proposed method was compared to the official method of ethyl acetate analysis (Gas Chromatography), and a satisfactory correlation was found between these techniques. © 2012 Elsevier Ltd. All rights reserved.