Population lensing vs thermal lensing in Yb:YAG rods and disks

The induced lenses in the Yb:YAG rods and disks end-pumped by a Gaussian beam were analyzed both analytically and numerically. The thermally assisted mechanisms of the lens formation were considered to include: the conventional volume thermal index changes ("dn/dT"), the bulging of end faces, the photoelastic effect, and the bending (for a disk). The heat conduction equations (with an axial heat flux for a disk and a radial heat flux for a rod), and quasi-static thermoelastic equations (in the plane-stress approximation with free boundary conditions) were solved to find the thermal lens power. The population rate equation with saturation (by amplified spontaneous emission or an external wave) was examined to find the electronic lens power in the active elements.

Mechanisms of a change in the refractive index of an intensely pumped Yb:YAG crystal

Mechanisms of a change in the refractive index appearing in an intensely diode-pumped Yb:YAG-laser disk element are studied with the help of polarisation interferometry and dynamic grating testing. It is found that changes in the electronic component of the refractive index arising upon changing the populations of electronic levels of Yb ions (the ground F state and the upper F level of the laser transition) and caused by the difference in the polarisability of these levels are an order of magnitude greater than thermal changes in the refractive index. It is shown that the difference Δp in the polarisability at the probe wavelength of 633 nm is 1.9 × 10 cm and at the laser transition wavelength of 1029 nm is 1.6 × 10 cm. ©2006 Kvantovaya Elektronika and Turpion Ltd.

Generation of 49-fs pulses directly from distributed Kerr-lens mode-locked Yb:YAG thin-disk oscillator

The concept of distributed Kerr-lens mode-locking and a thin-disk Yb:YAG oscillator based on this concept are presented. The described oscillator directly generates pulses with a duration of 49 fs and spectral width of 33 nm

Optimización de parámetros y modelación matemática del proceso de soldadura por láser de disco de diodos YB:YAG, aplicado en aceros avanzados AHSS

La aplicación del uso de la tecnología láser para la unión de materiales se ha incrementado sustancialmente en la industria metal-mecánica, esto se atribuye principalmente a las diferentes ventajas que tiene este proceso sobre los procesos de soldadura convencionales, como son la reducción en el costo de procesamiento, aumento de la productividad, incremento de la calidad del producto, la reducción de las zonas afectadas por el calor, la reducción de la distorsión en la piezas soldadas y además la versatilidad que representa la soldadura láser por ser un proceso sin contacto. No obstante el uso del láser para la unión de materiales en México se considera todavía una tecnología emergente, son muy pocas las industrias que han migrado de los procesos de soldadura convencionales al proceso de unión de materiales por rayo láser. Una de las industrias que ha empezado a utilizar el proceso de soldadura por láser en México, es la automotriz, en la cual constantemente se está buscado evitar un rezago tecnológico en los procesos de conformado y soldadura de piezas metálicas. Sin embargo en la actualidad, en la industria automotriz mexicana existe una gran dependencia de expertos de otros países para la supervisión, atención y el control de los procesos avanzados, como lo es el de la soldadura láser.En este trabajo, para lograr una mayor comprensión del proceso y del efecto de sus variables, se propuso aplicar una metodología de optimización en dos casos de estudio, en los cuales se utilizó una configuración de unión de soldadura a traslape con el modo de soldadura de ojo de cerradura o penetración completa, que es más bien conocida como “Keyhole welding”.

Yb：Y2O3透明陶瓷的光学性能研究

介绍了一种基于纳米粉末真空烧结技术的新型固体激光材料——Yb：Y2O3多晶陶瓷的制备工艺、物理化学特性、能级结构和光谱特性，并与Yb：YAG单晶进行了对比．采用紧凑型有源镜激光器（CAMIL）的抽运方式，验证了Yb：Y2O3透明陶瓷的激光输出性能．在35W的最大抽运功率下，得到波长1078nm，功率10．5w的连续激光输出，斜率效率达到37．5％．实验中还观察到激光输出波长随抽运功率增加而红移以及随输出耦合镜变化而漂移的现象．Yb：Y2O3多晶陶瓷是一种理想的激光材料，不仅具有与Yb：YAG单晶同样优秀的

Effects of Yb concentration on the spectroscopic properties of Yb : Y3Al5O12

Yb:YAG single crystals with Yb doping concentration 5.4, 16.3, 27.1, 53.6, and 100 at.% were grown by the Czochralski process. The effects of Yb concentration on the absorption spectra (190-1 100nm), fluorescence spectra under 940nm and X-ray excitation were studied. The concentration quenching of fluorescence was observed when the Yb doping concentration reaches to as high as 27.1 at.% for Yb:YAG. Under 940 nm excitation, the influence of the self-absorption at 969 and 1029 nrn on the fluorescence spectra is not evident when the Yb doping concentration is as high as 27.1 at.%. However, it can greatly change the shape of fluorescence spectra of Yb:YAG when the Yb doping concentration reaches to above 53.6 at.%. (c) 2005 Elsevier B.V. All rights reserved.

Efficient laser oscillation of Yb : Y3Al5O12 single crystal grown by temperature gradient technique

Low-threshold and highly efficient continuous-wave laser performance of Yb:Y3Al5O12 (Yb:YAG) single crystal grown by a temperature gradient technique (TGT) was achieved at room temperature. The laser can be operated at 1030 and 1049 nm by varying the transmission of the output coupler. Slope efficiencies of 57% and 68% at 1049 and 1030 nm, respectively, were achieved for 10 at. % Yb:YAG sample in continuous-wave laser-diode pumping. The effect of pump power on the laser emission spectrum of both wavelengths is addressed. The near-diffraction-limited beam quality for different laser cavities was achieved. The excellent laser performance indicates that TGT-grown Yb:YAG crystals have very good optical quality and can be potentially used in high-power solid-state lasers.

LD抽运Yb:GSO实现1090nm低阈值激光运转

We report what we believe to be the first demonstration of laser operation with a novel laser material of Yb3(+) -doped Gd-2 SiO2 (Yb: GSO) pumped by a laser diode at 940 nm. We obtained a low lasing threshold of 1.27 kW/cm(2) with the center wavelength of 1090 nm, which is lower than the value of 1.53 kW/cm(2) predicted for Yb: YAG. The maximal output power of 360 mW was obtained with a 2% output, which corresponds to a slope efficiency up to 19%.

Comparison of spectroscopic parameters of 15 at% Yb : YAlO3 and 15 at% Yb : Y3Al5O12

Yb: YAlO3 (YAP) (15 at %) and Yb: Y3Al5O12 (YAG)(15 at %) have been grown using the Czochralski method. Their absorption and fluorescence spectra were measured at room temperature and important spectroscopic parameters were calculated. Through the comparison of spectroscopic parameters of Yb:YAP and Yb: YAG, all results indicate that 15 at % Yb:YAP crystal is a potential candidate used for compact, efficient thin chip lasers when the laser output wavelength is 1012 or 103 8 nm. (C) 2004 Elsevier B.V. All rights reserved.

Yb掺杂原子数分数为0．5％的Yb：Y3Al5O12晶体的光谱分析

采用提拉法生长了Yb掺杂原子数分数为0．5％的Yb：Y3Al5O12。（Yb2YAG）晶体，对晶体的吸收光谱和荧光光谱进行了分析。与Yb掺杂原子数分数为5％的Yb：YAG晶体进行了对比，得出采用940nm激光二极管（LD）抽运晶体最为合适。原子数分数为0．5％的Yb：YAG晶体相对于原子数分数为5％的Yb：YAG晶体白吸收效应的影响要小。测量了原子数分数为0．5％的Yb：YAG晶体的荧光寿命为0．95ms，与理论值很接近。因此采用原子数分数为0．5%的Yb：YAG晶体作为激光工作物质将有利于高效、小型集成

不同Yb掺杂量的Yb：Y3Al5O12晶体的光谱分析

采用提拉法生长了Yb^3＋掺杂量分别为5．4at％，16．3at％，27．1at％，53．6at％和100at％的Yb：Y3Al5O12晶体．系统地表征和分析了Yb^3＋掺杂量对晶体吸收光谱和荧光光谱的影响．随着Yb^3＋掺杂量的增加，各峰值吸收系数呈线性增加的趋势．应用Smakula公式计算了各吸收峰对应的振荡强度，并分析了Yb^3＋掺杂量对振荡强度的影响．当Yb^3＋掺杂量增加到27．1at％时观察到了荧光猝灭现象；当Yb^3＋掺杂量增加到53．6at％时，荧光光谱的线形发生了很大的变化。

Characterization of diode-pumped laser operation of a novel Yb : GSO crystal

We report what is believed to be the first demonstration of the laser action of Yb3+ -doped Gd2SiO5 (Yb:GSO) crystal pumped by a 940-nm laser diode at room temperature. The threshold of laser generation is only 0.85 kW/cm(2), which is smaller than the theoretic threshold of Yb:YAG (1.54 kW/cm(2)). The laser wavelength is 1090 mn. With a 2.5% output coupler, the maximum output power is 415 mW under a pump power of 5 W. By using the SESAM, the Q-switched mode locking and CW mode-locked operations are demonstrated.

不同Yb掺质浓度的Yb：Y3Al5O12晶体激光性能的比较

采用提拉法生长了Yb^3＋掺质浓度为5％原子分数、50％原子分数和100％原子分数的Yb：Y3Al5O12（Yb：YAG）晶体。系统地分析了不同Yb^3＋掺质浓度晶体的吸收光谱和荧光光谱。从吸收峰和吸收系数可以看出采用940nm LD泵浦三种不同浓度的Yb：YAG晶体都比较合适。随着Yb^3＋离子掺质浓度的增高，晶体中出现的自吸收现象越为明显。通过对三种不同Yb掺质浓度晶体激光性能参数的计算，得出高掺质浓度Yb：YAG和YbAG晶体是有前景的激光增益介质。

半导体激光器抽运新型Yb：GYSO混晶实现连续锁模激光输出

掺杂Yb^2＋离子的激光材料具有能级结构简单、抽运波长与振荡波长相近、量子效率高等优点，十分适合作为半导体激光器（LD）直接抽运的高功率激光光源。近年来，随着高性能InGaAs激光二极管的发展和成本的降低，掺Yb抖激光介质的研究受到人们的极大关注，并已研制出了许多新型激光晶体，如Yb：YAG，Yb：KYW，Yb：KGW，Yb：YAB，Yb：GGG和Yb：CaF2等。但是这些晶体还有很多不足之处，譬如生长比较困难、发射谱带相对窄和晶伙执导忡能相对姜等．

Spectral properties and charge transfer luminescence of Yb3+ : Gd3Ga5O12 (Yb : GGG) crystal

The Yb (10%):GGG and Yb (30%): GGG crystals have been grown by the Czochralski method. The chemical compositions are: Yb1.07Gd1.74Ga5.19O12 and Yb0.33Gd1.47Ga5.2O12. The absorption and emission spectra of Yb:GGG crystal at room temperature have been measured. The spectroscopic parameters of Yb:GGG and Yb:YAG have been compared. Optical absorption spectra of Yb:GGG show 4f-4f transitions related to Gd3+ ion around 300 nm, and also an onset of charge transfer (CT) transitions from oxygen ligands to Gd3+ or Yb3+ cations below 240nm. The CT absorption of Yb3+ is largely overlapped by that of Gd3+ ions. (c) 2005 Elsevier B.V. All rights reserved.