NETCODE: an XOR-based warning dissemination scheme for vehicular wireless networks

The next generation of vehicles will be equipped with automated Accident Warning Systems (AWSs) capable of warning neighbouring vehicles about hazards that might lead to accidents. The key enabling technology for these systems is the Vehicular Ad-hoc Networks (VANET) but the dynamics of such networks make the crucial timely delivery of warning messages challenging. While most previously attempted implementations have used broadcast-based data dissemination schemes, these do not cope well as data traffic load or network density increases. This problem of sending warning messages in a timely manner is addressed by employing a network coding technique in this thesis. The proposed NETwork COded DissEmination (NETCODE) is a VANET-based AWS responsible for generating and sending warnings to the vehicles on the road. NETCODE offers an XOR-based data dissemination scheme that sends multiple warning in a single transmission and therefore, reduces the total number of transmissions required to send the same number of warnings that broadcast schemes send. Hence, it reduces contention and collisions in the network improving the delivery time of the warnings. The first part of this research (Chapters 3 and 4) asserts that in order to build a warning system, it is needful to ascertain the system requirements, information to be exchanged, and protocols best suited for communication between vehicles. Therefore, a study of these factors along with a review of existing proposals identifying their strength and weakness is carried out. Then an analysis of existing broadcast-based warning is conducted which concludes that although this is the most straightforward scheme, loading can result an effective collapse, resulting in unacceptably long transmission delays. The second part of this research (Chapter 5) proposes the NETCODE design, including the main contribution of this thesis, a pair of encoding and decoding algorithms that makes the use of an XOR-based technique to reduce transmission overheads and thus allows warnings to get delivered in time. The final part of this research (Chapters 6--8) evaluates the performance of the proposed scheme as to how it reduces the number of transmissions in the network in response to growing data traffic load and network density and investigates its capacity to detect potential accidents. The evaluations use a custom-built simulator to model real-world scenarios such as city areas, junctions, roundabouts, motorways and so on. The study shows that the reduction in the number of transmissions helps reduce competition in the network significantly and this allows vehicles to deliver warning messages more rapidly to their neighbours. It also examines the relative performance of NETCODE when handling both sudden event-driven and longer-term periodic messages in diverse scenarios under stress caused by increasing numbers of vehicles and transmissions per vehicle. This work confirms the thesis' primary contention that XOR-based network coding provides a potential solution on which a more efficient AWS data dissemination scheme can be built.

Early Warning System Potential for Single Sourcing Risk Mitigation

Part 17: Risk Analysis

Estimating hourly net radiation for leaf wetness duration using the Penman-Monteith equation

Leaf wetness duration (LWD) is related to plant disease occurrence and is therefore a key parameter in agrometeorology. As LWD is seldom measured at standard weather stations, it must be estimated in order to ensure the effectiveness of warning systems and the scheduling of chemical disease control. Among the models used to estimate LWD, those that use physical principles of dew formation and dew and/or rain evaporation have shown good portability and sufficiently accurate results for operational use. However, the requirement of net radiation (Rn) is a disadvantage foroperational physical models, since this variable is usually not measured over crops or even at standard weather stations. With the objective of proposing a solution for this problem, this study has evaluated the ability of four models to estimate hourly Rn and their impact on LWD estimates using a Penman-Monteith approach. A field experiment was carried out in Elora, Ontario, Canada, with measurements of LWD, Rn and other meteorological variables over mowed turfgrass for a 58 day period during the growing season of 2003. Four models for estimating hourly Rn based on different combinations of incoming solar radiation (Rg), airtemperature (T), relative humidity (RH), cloud cover (CC) and cloud height (CH), were evaluated. Measured and estimated hourly Rn values were applied in a Penman-Monteith model to estimate LWD. Correlating measured and estimated Rn, we observed that all models performed well in terms of estimating hourly Rn. However, when cloud data were used the models overestimated positive Rn and underestimated negative Rn. When only Rg and T were used to estimate hourly Rn, the model underestimated positive Rn and no tendency was observed for negative Rn. The best performance was obtained with Model I, which presented, in general, the smallest mean absolute error (MAE) and the highest C-index. When measured LWD was compared to the Penman-Monteith LWD, calculated with measured and estimated Rn, few differences were observed. Both precision and accuracy were high, with the slopes of the relationships ranging from 0.96 to 1.02 and R-2 from 0.85 to 0.92, resulting in C-indices between 0.87 and 0.93. The LWD mean absolute errors associated with Rn estimates were between 1.0 and 1.5h, which is sufficient for use in plant disease management schemes.

CROSS-COUNTRY STUDY ON THE DETERMINANTS OF BANK FINANCIAL DISTRESS

ABSTRACTBank failures affect owners, employees, and customers, possibly causing large-scale economic distress. Thus, banks must evaluate operational risks and develop early warning systems. This study investigates bank failures in the Organization for Economic Co-operation and Development, the North America Free Trade Area (NAFTA), the Association of Southeast Asian Nations, the European Union, newly industrialized countries, the G20, and the G8. We use financial ratios to analyze and explore the appropriateness of prediction models. Results show that capital ratios, interest income compared to interest expenses, non-interest income compared to non-interest expenses, return on equity, and provisions for loan losses have significantly negative correlations with bank failure. However, loan ratios, non-performing loans, and fixed assets all have significantly positive correlations with bank failure. In addition, the accuracy of the logistic model for banks from NAFTA countries provides the best prediction accuracy regarding bank failure.

Tradução, validação e aplicação dos sistemas de pontuação de alerta precoce 'ViEWS' e 'NEWS' em Portugal

Mestrado em Gestão e Avaliação de Tecnologias da Saúde

Implementação de alertas de interações medicamentosas na construção de uma farmácia online

Os sistemas de apoio à decisão clinica têm-se revelado essenciais no dia-a-dia da população, nomeadamente dos profissionais e dos pacientes. Estes sistemas podem ser aplicados com diferentes objetivos: como sistemas de alerta; de prevenção de doenças; sistemas para dosagem de medicação e prescrição; entre outras. Atualmente é notório o aumento de interesse por parte da população em entender e em possuir um papel ativo nas decisões médicas. Para conseguirem fazê-lo necessitam de procurar informação. O meio mais utilizado para obter essa informação é a internet, onde a informação se encontra em grande quantidade e muito dispersa. Para além da quantidade é imprescindível encontrar informação credível, para que não haja indução da pessoa em erro. Para ajudar a solucionar estes problemas surgiram os sistemas de recomendação na saúde. Estes sistemas foram idealizados para fornecer informações às quais os utilizadores podem recorrer para tomar decisões conscientes e seguras sobre a sua saúde. Também os sistemas de alerta se têm revelado importantes na área da saúde. Estes sistemas podem ser usados em diferentes contextos e sobre diferentes assuntos, como por exemplo, a alteração do estado clínico de um paciente monitorizado, em tempo real, ou em interações medicamentosas. As interações medicamentosas podem advir da automedicação do utente ou da larga quantidade de medicação que, a partir de determinada idade, os utentes ingerem. Pode ter como causa medicação que administrem regularmente, ou até mesmo diariamente, ou doenças/estados que o utente possua que, em simultâneo com determinada medicação pode causar reações adversas. Neste trabalho foi desenvolvido um protótipo de uma farmácia online (FoAM) que fornece, ao utilizador, alertas quando há possibilidade de interações. As causas de interações consideradas foram os medicamentos que o utilizador consuma e/ou doenças/estados que possua. O objetivo é alertar para o caso das causas que o utilizador possui interagirem com o(s) medicamento(s) que este deseja adquirir. Para alcançar esse objetivo foi necessário selecionar os medicamentos a disponibilizar assim como as suas interações. Essa seleção foi baseada no prontuário terapêutico 2013 disponibilizado pelo INFARMED. Depois de recolhida e analisada a informação, foi possível compreender que informações clínicas o sistema necessita para que consiga identificar os medicamentos que não são aconselháveis adquirir. Para isso, é necessário que o utilizador forneça essas informações clínicas pessoais, necessidade que vai de encontro à posição defendida por diversos autores que apontam o uso de registos eletrónicos de saúde muito benéfico para conseguir alertas mais personalizados suprindo assim as necessidades do utilizador. É também preponderante que o utilizador perceba o porquê de determinado medicamento não ser aconselhável, por isso, ao ser emitido o alerta é também apresentada a justificação do mesmo, ou seja, é disponibilizado ao utilizador qual a causa que indicou no formulário responsável pela interação.

Assessment of NDVI, land surface temperature and precipitation anomalies for drought monitoring in Bayankhongor province, Mongolia

During the last decade Mongolia’s region was characterized by a rapid increase of both severity and frequency of drought events, leading to pasture reduction. Drought monitoring and assessment plays an important role in the region’s early warning systems as a way to mitigate the negative impacts in social, economic and environmental sectors. Nowadays it is possible to access information related to the hydrologic cycle through remote sensing, which provides a continuous monitoring of variables over very large areas where the weather stations are sparse. The present thesis aimed to explore the possibility of using NDVI as a potential drought indicator by studying anomaly patterns and correlations with other two climate variables, LST and precipitation. The study covered the growing season (March to September) of a fifteen year period, between 2000 and 2014, for Bayankhongor province in southwest Mongolia. The datasets used were MODIS NDVI, LST and TRMM Precipitation, which processing and analysis was supported by QGIS software and Python programming language. Monthly anomaly correlations between NDVI-LST and NDVI-Precipitation were generated as well as temporal correlations for the growing season for known drought years (2001, 2002 and 2009). The results show that the three variables follow a seasonal pattern expected for a northern hemisphere region, with occurrence of the rainy season in the summer months. The values of both NDVI and precipitation are remarkably low while LST values are high, which is explained by the region’s climate and ecosystems. The NDVI average, generally, reached higher values with high precipitation values and low LST values. The year of 2001 was the driest year of the time-series, while 2003 was the wet year with healthier vegetation. Monthly correlations registered weak results with low significance, with exception of NDVI-LST and NDVI-Precipitation correlations for June, July and August of 2002. The temporal correlations for the growing season also revealed weak results. The overall relationship between the variables anomalies showed weak correlation results with low significance, which suggests that an accurate answer for predicting drought using the relation between NDVI, LST and Precipitation cannot be given. Additional research should take place in order to achieve more conclusive results. However the NDVI anomaly images show that NDVI is a suitable drought index for Bayankhongor province.

Multi-scale support vector algorithms for hot spot detection and modelling

The algorithmic approach to data modelling has developed rapidly these last years, in particular methods based on data mining and machine learning have been used in a growing number of applications. These methods follow a data-driven methodology, aiming at providing the best possible generalization and predictive abilities instead of concentrating on the properties of the data model. One of the most successful groups of such methods is known as Support Vector algorithms. Following the fruitful developments in applying Support Vector algorithms to spatial data, this paper introduces a new extension of the traditional support vector regression (SVR) algorithm. This extension allows for the simultaneous modelling of environmental data at several spatial scales. The joint influence of environmental processes presenting different patterns at different scales is here learned automatically from data, providing the optimum mixture of short and large-scale models. The method is adaptive to the spatial scale of the data. With this advantage, it can provide efficient means to model local anomalies that may typically arise in situations at an early phase of an environmental emergency. However, the proposed approach still requires some prior knowledge on the possible existence of such short-scale patterns. This is a possible limitation of the method for its implementation in early warning systems. The purpose of this paper is to present the multi-scale SVR model and to illustrate its use with an application to the mapping of Cs137 activity given the measurements taken in the region of Briansk following the Chernobyl accident.

Using 3D surface datasets to understand landslide evolution: From analogue models to real case study

Early detection of landslide surface deformation with 3D remote sensing techniques, as TLS, has become a great challenge during last decade. To improve our understanding of landslide deformation, a series of analogue simulation have been carried out on non-rigid bodies coupled with 3D digitizer. All these experiments have been carried out under controlled conditions, as water level and slope angle inclination. We were able to follow 3D surface deformation suffered by complex landslide bodies from precursory deformation still larger failures. These experiments were the basis for the development of a new algorithm for the quantification of surface deformation using automatic tracking method on discrete points of the slope surface. To validate the algorithm, comparisons were made between manually obtained results and algorithm surface displacement results. Outputs will help in understanding 3D deformation during pre-failure stages and failure mechanisms, which are fundamental aspects for future implementation of 3D remote sensing techniques in early warning systems.

Fact Sheet: Tornadoes, 2009

When a tornado is coming, you have only a short amount of time to make life-or-death decisions. Advance planning and quick response are the keys to surviving a tornado. Conduct tornado drills each tornado season. Designate an area in the home as a shelter, and practice having everyone in the family go there in response to a tornado threat. Discuss with family members the difference between a "tornado watch" and a "tornado warning."

Fact Sheet: Tornadoes, 2011

When a tornado is coming, you have only a short amount of time to make life-or-death decisions. Advance planning and quick response are the keys to surviving a tornado. Conduct tornado drills each tornado season. Designate an area in the home as a shelter, and practice having everyone in the family go there in response to a tornado threat. Discuss with family members the difference between a "tornado watch" and a "tornado warning." Contact your local emergency management office or American Red Cross chapter for more information on tornadoes.

Contribution à la cartographie géomorphologique de la dynamique sédimentaire des petits bassins versants torrentiels

Les laves torrentielles sont l'un des vecteurs majeurs de sédiments en milieu montagneux. Leur comportement hydrogéomorphologique est contrôlé par des facteurs géologique, géomorphologique, topographique, hydrologique, climatique et anthropique. Si, en Europe, la recherche s'est plus focalisée sur les aspects hydrologiques que géomorphologiques de ces phénomènes, l'identification des volumes de sédiments potentiellement mobilisables au sein de petits systèmes torrentiels et des processus responsables de leur transfert est d'une importance très grande en termes d'aménagement du territoire et de gestion des dangers naturels. De plus, une corrélation entre des événements pluviométriques et l'occurrence de laves torrentielles n'est pas toujours établie et de nombreux événements torrentiels semblent se déclencher lorsqu'un seuil géomorphologique intrinsèque (degré de remplissage du chenal) au cours d'eau est atteint.Une méthodologie pragmatique a été développée pour cartographier les stocks sédimentaires constituant une source de matériaux pour les laves torrentielles, comme outil préliminaire à la quantification des volumes transportés par ces phénomènes. La méthode s'appuie sur des données dérivées directement d'analyses en environnement SIG réalisées sur des modèles numériques d'altitude de haute précision, de mesures de terrain et d'interprétation de photographies aériennes. La méthode a été conçue pour évaluer la dynamique des transferts sédimentaires, en prenant en compte le rôle des différents réservoirs sédimentaires, par l'application du concept de cascade sédimentaire sous un angle cartographique.Les processus de transferts sédimentaires ont été étudiés dans deux bassins versants des Alpes suisses (torrent du Bruchi, à Blatten beiNaters et torrent du Meretschibach, à Agarn). La cartographie géomorphologique a été couplée avec des mesures complémentaires permettant d'estimer les flux sédimentaires et les taux d'érosion (traçages de peinture, piquets de dénudation et utilisation du LiDAR terrestre). La méthode proposée se révèle innovatrice en comparaison avec la plupart des systèmes de légendes géomorphologiques existants, qui ne sont souvent pas adaptés pour cartographier de manière satisfaisante les systèmes géomorphologiques complexes et actifs que sont les bassins torrentiels. L'intérêt de cette méthode est qu'elle permet l'établissement d'une cascade sédimentaire, mais uniquement pour des systèmes où l'occurrence d'une lave torrentielle est contrôlé par le degré de remplissage en matériaux du chenal. Par ailleurs, le produit cartographique ne peut être directement utilisé pour la création de cartes de dangers - axées sur les zones de dépôt - mais revêt un intérêt pour la mise en place de mesures de correction et pour l'installation de systèmes de monitoring ou d'alerte.La deuxième partie de ce travail de recherche est consacrée à la cartographie géomorphologique. Une analyse a porté sur un échantillon de 146 cartes ou systèmes de légende datant des années 1950 à 2009 et réalisés dans plus de 40 pays. Cette analyse a permis de mettre en évidence la diversité des applications et des techniques d'élaboration des cartes géomorphologiques. - Debris flows are one of the most important vectors of sediment transfer in mountainous areas. Their hydro-geomorphological behaviour is conditioned by geological, geomorphological, topographical, hydrological, climatic and anthropic factors. European research in torrential systems has focused more on hydrological processes than on geomorphological processes acting as debris flow triggers. Nevertheless, the identification of sediment volumes that have the potential to be mobilised in small torrential systems, as well as the recognition of processes responsible for their mobilisation and transfer within the torrential system, are important in terms of land-use planning and natural hazard management. Moreover, a correlation between rainfall and debris flow occurrence is not always established and a number of debris flows seems to occur when a poorly understood geomorphological threshold is reached.A pragmatic methodology has been developed for mapping sediment storages that may constitute source zone of bed load transport and debris flows as a preliminary tool before quantifying their volumes. It is based on data directly derived from GIS analysis using high resolution DEM's, field measurements and aerial photograph interpretations. It has been conceived to estimate sediment transfer dynamics, taking into account the role of different sediment stores in the torrential system applying the concept of "sediment cascade" in a cartographic point of view.Sediment transfer processes were investigated in two small catchments in the Swiss Alps (Bruchi torrent, Blatten bei Naters and Meretschibach torrent, Agarn). Thorough field geomorphological mapping coupled with complementary measurements were conducted to estimate sediment fluxes and denudation rates, using various methods (reference coloured lines, wooden markers and terrestrial LiDAR). The proposed geomorphological mapping methodology is quite innovative in comparison with most legend systems that are not adequate for mapping active and complex geomorphological systems such as debris flow catchments. The interest of this mapping method is that it allows the concept of sediment cascade to be spatially implemented but only for supply-limited systems. The map cannot be used directly for the creation of hazard maps, focused on the deposition areas, but for the design of correction measures and the implementation of monitoring and warning systems.The second part of this work focuses on geomorphological mapping. An analysis of a sample of 146 (extracts of) maps or legend systems dating from the middle of the 20th century to 2009 - realised in more than 40 different countries - was carried out. Even if this study is not exhaustive, it shows a clear renewed interest for the discipline worldwide. It highlights the diversity of applications, techniques (scale, colours and symbology) used for their conception.

From Regional Landslide Detection to Site-Specific Slope Deformation Monitoring and Modelling Based on Active Remote Sensors

Landslide processes can have direct and indirect consequences affecting human lives and activities. In order to improve landslide risk management procedures, this PhD thesis aims to investigate capabilities of active LiDAR and RaDAR sensors for landslides detection and characterization at regional scales, spatial risk assessment over large areas and slope instabilities monitoring and modelling at site-specific scales. At regional scales, we first demonstrated recent boat-based mobile LiDAR capabilities to model topography of the Normand coastal cliffs. By comparing annual acquisitions, we validated as well our approach to detect surface changes and thus map rock collapses, landslides and toe erosions affecting the shoreline at a county scale. Then, we applied a spaceborne InSAR approach to detect large slope instabilities in Argentina. Based on both phase and amplitude RaDAR signals, we extracted decisive information to detect, characterize and monitor two unknown extremely slow landslides, and to quantify water level variations of an involved close dam reservoir. Finally, advanced investigations on fragmental rockfall risk assessment were conducted along roads of the Val de Bagnes, by improving approaches of the Slope Angle Distribution and the FlowR software. Therefore, both rock-mass-failure susceptibilities and relative frequencies of block propagations were assessed and rockfall hazard and risk maps could be established at the valley scale. At slope-specific scales, in the Swiss Alps, we first integrated ground-based InSAR and terrestrial LiDAR acquisitions to map, monitor and model the Perraire rock slope deformation. By interpreting both methods individually and originally integrated as well, we therefore delimited the rockslide borders, computed volumes and highlighted non-uniform translational displacements along a wedge failure surface. Finally, we studied specific requirements and practical issues experimented on early warning systems of some of the most studied landslides worldwide. As a result, we highlighted valuable key recommendations to design new reliable systems; in addition, we also underlined conceptual issues that must be solved to improve current procedures. To sum up, the diversity of experimented situations brought an extensive experience that revealed the potential and limitations of both methods and highlighted as well the necessity of their complementary and integrated uses.

Aircraft tracking and classification with vhf passive bistatic radar

Since the times preceding the Second World War the subject of aircraft tracking has been a core interest to both military and non-military aviation. During subsequent years both technology and configuration of the radars allowed the users to deploy it in numerous fields, such as over-the-horizon radar, ballistic missile early warning systems or forward scatter fences. The latter one was arranged in a bistatic configuration. The bistatic radar has continuously re-emerged over the last eighty years for its intriguing capabilities and challenging configuration and formulation. The bistatic radar arrangement is used as the basis of all the analyzes presented in this work. The aircraft tracking method of VHF Doppler-only information, developed in the first part of this study, is solely based on Doppler frequency readings in relation to time instances of their appearance. The corresponding inverse problem is solved by utilising a multistatic radar scenario with two receivers and one transmitter and using their frequency readings as a base for aircraft trajectory estimation. The quality of the resulting trajectory is then compared with ground-truth information based on ADS-B data. The second part of the study deals with the developement of a method for instantaneous Doppler curve extraction from within a VHF time-frequency representation of the transmitted signal, with a three receivers and one transmitter configuration, based on a priori knowledge of the probability density function of the first order derivative of the Doppler shift, and on a system of blocks for identifying, classifying and predicting the Doppler signal. The extraction capabilities of this set-up are tested with a recorded TV signal and simulated synthetic spectrograms. Further analyzes are devoted to more comprehensive testing of the capabilities of the extraction method. Besides testing the method, the classification of aircraft is performed on the extracted Bistatic Radar Cross Section profiles and the correlation between them for different types of aircraft. In order to properly estimate the profiles, the ADS-B aircraft location information is adjusted based on extracted Doppler frequency and then used for Bistatic Radar Cross Section estimation. The classification is based on seven types of aircraft grouped by their size into three classes.