Comparison of non-linear growth models to describe the growth curve in West African Dwarf sheep

The objectives of this study were to compare the goodness of fit of four non-linear growth models, i.e. Brody, Gompertz, Logistic and Von Bertalanffy, in West African Dwarf (WAD) sheep. A total of 5274 monthly weight records from birth up to 180 days of age from 889 lambs, collected during 2001 to 2004 in Betecoucou breeding farm in Benin were used. In the preliminary analysis, the General Linear Model Procedure of the Statistical Analysis Systems Institute was applied to the dataset to identify the significant effects of the sex of lamb (male and female), type of birth (single and twin), season of birth (rainy season and dry season), parity of dam (1, 2 and 3) and year of birth (2001, 2002, 2003 and 2004) on the observed birth weight and monthly weight up to 6 months of age. The models parameters (A, B and k), coefficient of determination (112), mean square error (MSE) were calculated using language of technical computing package Matlab(R), 2006. The mean values of A, B and k were substituted into each model to calculate the corresponding Akaike's Information Criterion (AIC). Among the four growth functions, the Brody model has been selected for its accuracy of fit according to the higher R(2), lower MSE and A/C Finally, the parameters A, B and k were adjusted in Matlab(R) 2006 for the sex of lamb, year of birth, season of birth, birth type and the parity of ewe, providing a specific slope of the Brody growth curve. The results of this study suggest that Brody model can be useful for WAD sheep breeding in Betecoucou farm conditions through growth monitoring.

Efeito da adição de culturas láticas mesofílicas sobre a qualidade do queijo de coalho

O objetivo deste trabalho foi avaliar a característica do queijo de coalho, produzido a partir do leite bovino pasteurizado, mediante a utilização de bactérias láticas mesofílicas do gênero Lactococcus lactis ssp. cremoris e Lactococcus lactis ssp. lactis específicas. As culturas láticas oriundas do Banco de Bactérias Láticas da Universidade Estadual do Ceará foram ativadas junto às instalações do Laboratório de Bactérias Láticas da Universidade Federal Rural da Amazônia-UFRA, Campus de Belém. As culturas láticas foram ativadas durante três dias consecutivos em Leite Desnatado Reconstituído (LDR) 12% esterilizado e incubadas a 30 °C ± 2 °C, até a coagulação do leite. Após reativação, a cultura industrial foi obtida pela transferência do inoculo de 1% (v/v) para frascos de vidros contendo 500 ml de LDR 12% esterilizado, seguida de incubação a 30 °C ± 2 °C até a coagulação do leite, em seguida a cultura (fermento lático) foi adicionada diretamente no tanque de fabricação contendo o leite pasteurizado, mantendo-se a proporção de 1:1. Para avaliação tecnológica foram utilizados as seguintes culturas láticas isoladas de leite cru: Lactococcus lactis ssp. lactis (LL); Lactococcus lactis (atípico) (LLA); Lactococcus lactis ssp. cremoris (atípico) (LLCA); Lactococcus lactis ssp. cremoris (LLC),. As porções de Amostras foram retiradas, colocadas em processador de alimentos e processadas até formar uma amostra. Em seguida, foram acondicionadas em frascos estéreis, identificadas e mantidas em freezer para posterior análises de determinação do extrato seco, umidade (%), extrato seco total (EST), gordura (G), gordura no extrato seco (GES), acidez, pH, cloretos, nitrogênio total (NT), nitrogênio solúvel em pH 4,6, nitrogênio solúvel em TCA 12%. O índice de proteólise ou extensão da maturação foi avaliado pela divisão do NT. Para o teste de aceitação utilizou-se a escala hedônica estruturada de nove pontos, para avaliar o produto quanto ao aroma, aspecto geral, gosto e textura. O teste de fritura de acordo com metodologia descrita por Cavalcante et al., (2007). As análises microbiológicas das amostras de queijos experimentais nos 1º e 30º dia de maturação, encaminhadas ao Laboratório Central – LACEN, Divisão de Análises de Produtos – DEP. E consistiram em Contagem de bactérias Aeróbias Mesófilas, Determinação de Coliformes. Para o teste de fritura não houve análise estatística. O delineamento utilizado foi o Inteiramente Casualisado e foi utilizada a metodologia de modelos mistos para dados longitudinais, com objetivo de modelar a estrutura de (co)variância entre medidas coletadas na mesma unidade experimental em tempos diferentes, por meio do modelo y_ijk=μ+α_i+ δ_(i)+β_k+ α β_ik+ε_ijk. Utilizando-se o programa estatístico Statistical Analysis Systems - SAS (SAS INSTITUTE INC., 1992). Os tratamentos LL e LLA foram reprovados no teste de fritura. Houve ligação entre a característica derretimento com a umidade, acidez e proteólise. Os queijos que apresentaram maiores valores de proteólise apresentaram maior capacidade de derretimento. As amostras de queijo coalho tiveram boa aceitabilidade no teste de aceitação.

Avaliação da espectrometria de absorção atômica com nebulização térmica em tubo aquecido em chama (TS-FF-AAS) para determinação de Cd, Cu, Pb e Zn em álcool combustível e óleo diesel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Global flow analysis as a practical compilation tool

This paper addresses the issue of the practicality of global flow analysis in logic program compilation, in terms of speed of the analysis, precisión, and usefulness of the information obtained. To this end, design and implementation aspects are discussed for two practical abstract interpretation-based flow analysis systems: MA , the MCC And-parallel Analyzer and Annotator; and Ms, an experimental mode inference system developed for SB-Prolog. The paper also provides performance data obtained (rom these implementations and, as an example of an application, a study of the usefulness of the mode information obtained in reducing run-time checks in independent and-parallelism.Based on the results obtained, it is concluded that the overhead of global flow analysis is not prohibitive, while the results of analysis can be quite precise and useful.

On the practicality of global flow analysis of logic programs

This paper addresses the issue of the practicality of global flow analysis in logic program compilation, in terms of both speed and precision of analysis. It discusses design and implementation aspects of two practical abstract interpretation-based flow analysis systems: MA3, the MOO Andparallel Analyzer and Annotator; and Ms, an experimental mode inference system developed for SB-Prolog. The paper also provides performance data obtained from these implementations. Based on these results, it is concluded that the overhead of global flow analysis is not prohibitive, while the results of analysis can be quite precise and useful.

Design and installation, total energy plant-central equipment building, Summit Plaza Apartments : "Operation Breakthrough site", Jersey City, New Jersey /

"Previous edition current."

Classification and analysis of integrating frameworks in multiscale modelling

Chemical engineers are turning to multiscale modelling to extend traditional modelling approaches into new application areas and to achieve higher levels of detail and accuracy. There is, however, little advice available on the best strategy to use in constructing a multiscale model. This paper presents a starting point for the systematic analysis of multiscale models by defining several integrating frameworks for linking models at different scales. It briefly explores how the nature of the information flow between the models at the different scales is influenced by the choice of framework, and presents some restrictions on model-framework compatibility. The concepts are illustrated with reference to the modelling of a catalytic packed bed reactor. (C) 2004 Elsevier Ltd. All rights reserved.

Towards the formation of a sustainable South Florida: An analysis of conflict resolution and consensus building in the South Florida Everglades Ecosystem Restoration Initiative

This dissertation examines the sociological process of conflict resolution and consensus building in South Florida Everglades Ecosystem Restoration through what I define as a Network Management Coordinative Interstitial Group (NetMIG). The process of conflict resolution can be summarized as the participation of interested and affected parties (stakeholders) in a forum of negotiation. I study the case of the Governor's Commission for a Sustainable South Florida (GCSSF) that was established to reduce social conflict. Such conflict originated from environmental disputes about the Everglades and was manifested in the form of gridlock among regulatory (government) agencies, Indian tribes, as well as agricultural, environmental conservationist and urban development interests. The purpose of the participatory forum is to reduce conflicts of interest and to achieve consensus, with the ultimate goal of restoration of the original Everglades ecosystem, while cultivating the economic and cultural bases of the communities in the area. Further, the forum aim to formulate consensus through envisioning a common sustainable community by providing means to achieve a balance between human and natural systems. ^ Data were gathered using participant observation and document analysis techniques to conduct a theoretically based analysis of the role of the Network Management Coordinative Interstitial Group (NetMIG). I use conflict resolution theory, environmental conflict theory, stakeholder analysis, systems theory, differentiation and social change theory, and strategic management and planning theory. ^ The purpose of this study is to substantiate the role of the Governor's Commission for a Sustainable South Florida (GCSSF) as a consortium of organizations in an effort to resolve conflict rather than an ethnographic study of this organization. Environmental restoration of the Everglades is a vehicle for recognizing the significance of a Network Management Coordinative Interstitial Group (NetMIG), namely the Governor's Commission for a Sustainable South Florida (GCSSF), as a structural mechanism for stakeholder participation in the process of social conflict resolution through the creation of new cultural paradigms for a sustainable community. ^

EMMA 2--a MAGE-compliant system for the collaborative analysis and integration of microarray data

Background: Understanding transcriptional regulation by genome-wide microarray studies can contribute to unravel complex relationships between genes. Attempts to standardize the annotation of microarray data include the Minimum Information About a Microarray Experiment (MIAME) recommendations, the MAGE-ML format for data interchange, and the use of controlled vocabularies or ontologies. The existing software systems for microarray data analysis implement the mentioned standards only partially and are often hard to use and extend. Integration of genomic annotation data and other sources of external knowledge using open standards is therefore a key requirement for future integrated analysis systems. Results: The EMMA 2 software has been designed to resolve shortcomings with respect to full MAGE-ML and ontology support and makes use of modern data integration techniques. We present a software system that features comprehensive data analysis functions for spotted arrays, and for the most common synthesized oligo arrays such as Agilent, Affymetrix and NimbleGen. The system is based on the full MAGE object model. Analysis functionality is based on R and Bioconductor packages and can make use of a compute cluster for distributed services. Conclusion: Our model-driven approach for automatically implementing a full MAGE object model provides high flexibility and compatibility. Data integration via SOAP-based web-services is advantageous in a distributed client-server environment as the collaborative analysis of microarray data is gaining more and more relevance in international research consortia. The adequacy of the EMMA 2 software design and implementation has been proven by its application in many distributed functional genomics projects. Its scalability makes the current architecture suited for extensions towards future transcriptomics methods based on high-throughput sequencing approaches which have much higher computational requirements than microarrays.

Mission and Scenario Planning for Unmanned Aerial Vehicles (Path Planning and Collision Avoidance Systems)

As unmanned autonomous vehicles (UAVs) are being widely utilized in military and civil applications, concerns are growing about mission safety and how to integrate dierent phases of mission design. One important barrier to a coste ective and timely safety certication process for UAVs is the lack of a systematic approach for bridging the gap between understanding high-level commander/pilot intent and implementation of intent through low-level UAV behaviors. In this thesis we demonstrate an entire systems design process for a representative UAV mission, beginning from an operational concept and requirements and ending with a simulation framework for segments of the mission design, such as path planning and decision making in collision avoidance. In this thesis, we divided this complex system into sub-systems; path planning, collision detection and collision avoidance. We then developed software modules for each sub-system

A novel CE microchip with micro pillars column & double-L injection design for Capacitance Coupled Contactless Conductivity detection technology

This novel capillary electrophoresis microchip, or also known as μTAS (micro total analysis system) was designed to separate complex aqueous based compounds, similar to commercial CE & microchip (capillary electrophoresis) systems, but more compact. This system can be potentially used for mobile/portable chemical analysis equipment. Un-doped silicon wafer & ultra-thin borofloat glass (Pyrex) wafers have been used to fabricate the device. Double-L injection feature, micro pillars column, bypass separation channel & hybrid- referenced C4D electrodes were designed to achieve a high SNR (signal to noise ratio), easy- separation, for a durable and reusable μTAS for CE use.

Development of a composite line source emission model for traffic interrupted microenvironments and its application in particle number emissions at a bus station

A composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. Hence, this model was able to quickly quantify the time spent in each segment within the considered zone, as well as the composition and position of the requisite segments based on the vehicle fleet information, which not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bi-directional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. Although the CLSE model is intended to be applied in traffic management and transport analysis systems for the evaluation of exposure, as well as the simulation of vehicle emissions in traffic interrupted microenvironments, the bus station model can also be used for the input of initial source definitions in future dispersion models.

A service-oriented architecture for text analytics enabled business applications

Experiences showed that developing business applications that base on text analysis normally requires a lot of time and expertise in the field of computer linguistics. Several approaches of integrating text analysis systems with business applications have been proposed, but so far there has been no coordinated approach which would enable building scalable and flexible applications of text analysis in enterprise scenarios. In this paper, a service-oriented architecture for text processing applications in the business domain is introduced. It comprises various groups of processing components and knowledge resources. The architecture, created as a result of our experiences with building natural language processing applications in business scenarios, allows for the reuse of text analysis and other components, and facilitates the development of business applications. We verify our approach by showing how the proposed architecture can be applied to create a text analytics enabled business application that addresses a concrete business scenario. © 2010 IEEE.

CCD: Connected Component Descriptor for Robust Mosaicing of Camera-Captured Document Images

We propose a robust method for mosaicing of document images using features derived from connected components. Each connected component is described using the Angular Radial Tran. form (ART). To ensure geometric consistency during feature matching, the ART coefficients of a connected component are augmented with those of its two nearest neighbors. The proposed method addresses two critical issues often encountered in correspondence matching: (i) The stability of features and (ii) Robustness against false matches due to the multiple instances of characters in a document image. The use of connected components guarantees a stable localization across images. The augmented features ensure a successful correspondence matching even in the presence of multiple similar regions within the page. We illustrate the effectiveness of the proposed method on camera captured document images exhibiting large variations in viewpoint, illumination and scale.