A Unified Framework for e-Commerce Systems Development : Business Process Pattern Perspective

In electronic commerce, systems development is based on two fundamental types of models, business models and process models. A business model is concerned with value exchanges among business partners, while a process model focuses on operational and procedural aspects of business communication. Thus, a business model defines the what in an e-commerce system, while a process model defines the how. Business process design can be facilitated and improved by a method for systematically moving from a business model to a process model. Such a method would provide support for traceability, evaluation of design alternatives, and seamless transition from analysis to realization. This work proposes a unified framework that can be used as a basis to analyze, to interpret and to understand different concepts associated at different stages in e-Commerce system development. In this thesis, we illustrate how UN/CEFACT’s recommended metamodels for business and process design can be analyzed, extended and then integrated for the final solutions based on the proposed unified framework. Also, as an application of the framework, we demonstrate how process-modeling tasks can be facilitated in e-Commerce system design. The proposed methodology, called BP3 stands for Business Process Patterns Perspective. The BP3 methodology uses a question-answer interface to capture different business requirements from the designers. It is based on pre-defined process patterns, and the final solution is generated by applying the captured business requirements by means of a set of production rules to complete the inter-process communication among these patterns.

Generalizability and Applicability of Model-Based Business Process Compliance-Checking Approaches – A State-of-the-Art Analysis and Research Roadmap

With a steady increase of regulatory requirements for business processes, automation support of compliance management is a field garnering increasing attention in Information Systems research. Several approaches have been developed to support compliance checking of process models. One major challenge for such approaches is their ability to handle different modeling techniques and compliance rules in order to enable widespread adoption and application. Applying a structured literature search strategy, we reflect and discuss compliance-checking approaches in order to provide an insight into their generalizability and evaluation. The results imply that current approaches mainly focus on special modeling techniques and/or a restricted set of types of compliance rules. Most approaches abstain from real-world evaluation which raises the question of their practical applicability. Referring to the search results, we propose a roadmap for further research in model-based business process compliance checking.

Knowledge representation tool for cognitiveprocesses modeling

In the last decades, neuropsychological theories tend to consider cognitive functions as a result of the whole brainwork and not as individual local areas of its cortex. Studies based on neuroimaging techniques have increased in the last years, promoting an exponential growth of the body of knowledge about relations between cognitive functions and brain structures [1]. However, so fast evolution make complicated to integrate them in verifiable theories and, even more, translated in to cognitive rehabilitation. The aim of this research work is to develop a cognitive process-modeling tool. The purpose of this system is, in the first term, to represent multidimensional data, from structural and functional connectivity, neuroimaging, data from lesion studies and derived data from clinical intervention [2][3]. This will allow to identify consolidated knowledge, hypothesis, experimental designs, new data from ongoing studies and emerging results from clinical interventions. In the second term, we pursuit to use Artificial Intelligence to assist in decision making allowing to advance towards evidence based and personalized treatments in cognitive rehabilitation. This work presents the knowledge base design of the knowledge representation tool. It is compound of two different taxonomies (structure and function) and a set of tags linking both taxonomies at different levels of structural and functional organization. The remainder of the abstract is organized as follows: Section 2 presents the web application used for gathering necessary information for generating the knowledge base, Section 3 describes knowledge base structure and finally Section 4 expounds reached conclusions.

Specification and validation of process constraints for flexible workflows

Workflow systems have traditionally focused on the so-called production processes which are characterized by pre-definition, high volume, and repetitiveness. Recently, the deployment of workflow systems in non-traditional domains such as collaborative applications, e-learning and cross-organizational process integration, have put forth new requirements for flexible and dynamic specification. However, this flexibility cannot be offered at the expense of control, a critical requirement of business processes. In this paper, we will present a foundation set of constraints for flexible workflow specification. These constraints are intended to provide an appropriate balance between flexibility and control. The constraint specification framework is based on the concept of pockets of flexibility which allows ad hoc changes and/or building of workflows for highly flexible processes. Basically, our approach is to provide the ability to execute on the basis of a partially specified model, where the full specification of the model is made at runtime, and may be unique to each instance. The verification of dynamically built models is essential. Where as ensuring that the model conforms to specified constraints does not pose great difficulty, ensuring that the constraint set itself does not carry conflicts and redundancy is an interesting and challenging problem. In this paper, we will provide a discussion on both the static and dynamic verification aspects. We will also briefly present Chameleon, a prototype workflow engine that implements these concepts. (c) 2004 Elsevier Ltd. All rights reserved.

Do process modelling techniques get better? A comparative ontological analysis of BPMN

Current initiatives in the field of Business Process Management (BPM) strive for the development of a BPM standard notation by pushing the Business Process Modeling Notation (BPMN). However, such a proposed standard notation needs to be carefully examined. Ontological analysis is an established theoretical approach to evaluating modelling techniques. This paper reports on the outcomes of an ontological analysis of BPMN and explores identified issues by reporting on interviews conducted with BPMN users in Australia. Complementing this analysis we consolidate our findings with previous ontological analyses of process modelling notations to deliver a comprehensive assessment of BPMN.

A domain specific modeling approach for coordinating user-centric communication services

Rapid advances in electronic communication devices and technologies have resulted in a shift in the way communication applications are being developed. These new development strategies provide abstract views of the underlying communication technologies and lead to the so-called user-centric communication applications. One user-centric communication (UCC) initiative is the Communication Virtual Machine (CVM) technology, which uses the Communication Modeling Language (CML) for modeling communication services and the CVM for realizing these services. In communication-intensive domains such as telemedicine and disaster management, there is an increasing need for user-centric communication applications that are domain-specific and that support the dynamic coordination of communication services commonly found in collaborative communication scenarios. However, UCC approaches like the CVM offer little support for the dynamic coordination of communication services resulting from inherent dependencies between individual steps of a collaboration task. Users either have to manually coordinate communication services, or reply on a process modeling technique to build customized solutions for services in a specific domain that are usually costly, rigidly defined and technology specific. ^ This dissertation proposes a domain-specific modeling approach to address this problem by extending the CVM technology with communication-specific abstractions of workflow concepts commonly found in business processes. The extension involves (1) the definition of the Workflow Communication Modeling Language (WF-CML), a superset of CML, and (2) the extension of the functionality of CVM to process communication-specific workflows. The definition of WF-CML includes the meta-model and the dynamic semantics for control constructs and concurrency. We also extended the CVM prototype to handle the modeling and realization of WF-CML models. A comparative study of the proposed approach with other workflow environments validates the claimed benefits of WF-CML and CVM.^

Managing and utilizing information flow for new products’ periodic account sales process

The goal was to understand, document and module how information is currently flown internally in the largest dairy organization in Finland. The organization has undergone radical changes in the past years due to economic sanctions between European Union and Russia. Therefore, organization’s ultimate goal would be to continue its growth through managing its sales process more efficiently. The thesis consists of a literature review and an empirical part. The literature review consists of knowledge management and process modeling theories. First, the knowledge management discusses how data, information and knowledge are exchanged in the process. Knowledge management models and processes are describing how knowledge is created, exchanged and can be managed in an organization. Secondly, the process modeling is responsible for visualizing information flow through discussion of modeling approaches and presenting different methods and techniques. Finally, process’ documentation procedure was presented. In the end, a constructive research approach was used in order to identify process’ related problems and bottlenecks. Therefore, possible solutions were presented based on this approach. The empirical part of the study is based on 37 interviews, organization’s internal data sources and theoretical framework. The acquired data and information were used to document and to module the sales process in question with a flowchart diagram. Results are conducted through construction of the flowchart diagram and analysis of the documentation. In fact, answers to research questions are derived from empirical and theoretical parts. In the end, 14 problems and two bottlenecks were identified in the process. The most important problems are related to approach and/or standardization for information sharing, insufficient information technology tool utilization and lack of systematization of documentation. The bottlenecks are caused by the alarming amount of changes to files after their deadlines.

A new chemorheological analysis of highly filled thermosets used in integrated circuit packaging

Chemorheology (and thus process modeling) of highly filled thermosets used in integrated circuit (IC) packaging has been complicated by their highly filled nature, fast kinetics of curing, and viscoelastic nature. This article summarizes a more thorough chemorheological analysis of a typical IC packaging thermoset material, including novel isothermal and nonisothermal multiwave parallel-plate chemorheology. This new chemorheological analysis may be used to optimize existing and design new IC packaging processes. (C) 1997 John Wiley & Sons, Inc.

A gest??o da informa????o e a modelagem de processos

O estudo trata da gest??o da informa????o, utilizando a abordagem de n??veis de maturidade como forma de obter melhorias na governan??a corporativa de uma organiza????o do setor p??blico. A gest??o da informa????o ?? entendida como processo, e o mapeamento de processos ?? tratado como primeiro passo para gerar oportunidades de melhoria. Uma proposta de formato para modelar e descrever os processos de gest??o da informa????o ?? apresentada, e um caso pr??tico de mapeamento baseado na proposta ?? descrito. O mapeamento foi realizado em uma organiza????o p??blica, em uma unidade organizacional respons??vel por gerir grande parte das informa????es corporativas da organiza????o. Algumas fases do trabalho j?? foram cumpridas, e as fases seguintes fazem parte de um cronograma em andamento. Os resultados pr??ticos observados indicam que a metodologia proposta pode ser interessante para atingir, paulatinamente, maiores n??veis de conhecimento sobre como gerenciar adequadamente a informa????o.

Metamodelação de processos e serviços

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática

Implementação BIM nos processos organizacionais em empresas de construção – um caso de estudo

Dissertação para obtenção do Grau Mestre em Engenharia Civil – Perfil de Construção

Application of OSN in membrane cascade for purification of the API Amoxicillin

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Governança e modelação de processos de TI

Estudos efectuados, ao longo dos últimos anos, têm demonstrado como os recursos de Tecnologia de Informação (TI) devem ser usados de maneira a propiciar a criação de ambientes organizacionais mais alinhados com as necessidades de negócio. Actualmente, vivemos um processo competitivo onde as organizações gerem muitos activos – pessoas, dinheiro, instalações, fornecedores, clientes – e investem fortemente em Tecnologia de Informação. Para que a organização consiga extrair benefícios concretos do processo de manipulação do conhecimento é necessário que esta possua mecanismos estruturais de gestão que permitam criar uma base de conhecimento adequada, levando a organização a preservar o seu capital intelectual. A governança de TI, na forma como é debatida actualmente no mercado, está mais focada no uso de boas práticas representadas por metodologias como CobiT (Control Objectives for Information and related Technology) e ITIL (Information Technology Infrastructure Library). No entanto, neste estudo vamos mais além e apresentamos uma visão de como a governança de TI pode ser útil ao alinhamento do negócio com a TI, através do uso de uma nova técnica que permite identificar os níveis de aptidão da gestão de serviços de TI, de modo a avaliar e gerir, não só os problemas complexos dos sistemas de informação e a tecnologia das organizações, mas também questões de gestão, operacionais e culturais. Esta dissertação propõe um método para avaliar o grau de maturidade da governança de TI dentro de uma organização. Simultaneamente, foram recolhidas métricas da complexidade dos processos de TI, as quais foram correlacionadas com os níveis de maturidade. Baseado nestas correlações, foi criado um modelo que interliga a governança de TI com o nível de complexidade dos processos de TI. Começamos por fornecer uma panorâmica sobre o trabalho que tem sido desenvolvido nas áreas de domínio desta dissertação; apresentamos alguns conceitos básicos sobre a governança de TI e qual a sua importância; relatamos detalhadamente a abordagem adaptada para determinar o perfil de governança de TI das empresas portuguesas; formalizamos um conjunto de indicadores quantitativos que permitem exprimir a complexidade de um processo, com recurso à linguagem OCL (Object Constraint Language), sobre um metamodelo BPMN (Business Process Modeling Notation); analisamos os resultados e apresentamos as conclusões. Esta dissertação termina com a identificação das linhas de orientação gerais para a continuação futura do trabalho desenvolvido.

Standardization of project management processes

Software development is a discipline that is almost as old as the history of computers. With the advent of the Internet and all of its related technologies, software development has been on high demand. But, and especially in SME (small and medium enterprise), this was not accompanied with a comparable effort to develop a set of sustainable and standardized activities of project management, which lead to increasing inefficiencies and costs. Given the actual economic situation, it makes sense to engage in an effort to reduce said inefficiencies and rising costs. For that end, this work will analyze the current state of software development’s project management processes on a Portuguese SME, along with its problems and inefficiencies in an effort to create a standardized model to manage software development, with special attention given to critical success factors in an agile software development environment, while using the best practices in process modeling. This work also aims to create guidelines to correctly integrate these changes in the existing IS structure of a company.

Modelação do processo de reconhecimento de estudos em Angola

Apesar de as tecnologias e os Sistemas de Informação (SI) serem hoje fatores essenciais para uma gestão eficiente, estes não têm, por si só, sido suficientes para garantir os resultados desejados na medida em que fragmentam os processos de negócio em torno de suas aplicações funcionais. Clareza na perceção dos requisitos dos processos de negócio a serem implementados em SI torna-se um fator determinante para que os resultados provenientes da sua implementação revertam em benefícios para as organizações. Esta dissertação tem por base a utilização do recurso da modelação, inserida nas melhores práticas de Business Process Management (BPM), como ferramenta de eliciação dos requisitos dos processos de negócio, com a intenção de mitigar ou eliminar dificuldades no seu entendimento e garantir o alinhamento destes com os objetivos estratégicos da organização. Para o desenvolvimento prático, foi realizado um Caso de Estudo, onde se procedeu à Modelação do Processo de Negócio de Reconhecimento de Estudos em Angola, utilizando a Business Process Modeling Notation (BPMN). O contributo deste trabalho consiste na apresentação dos benefícios da prática de modelação de processos de negócio, suportada pela aplicação da abordagem BPM. Ambiciona-se que o resultado obtido possa contribuir na explicitação e visibilidade dos processos, favorecendo o entendimento dos seus requisitos, e garantir o alcance dos resultados esperados aquando da sua implementação em SI.