Quantum symmetries and the Weyl–Wigner product of group representations

In the usual formulation of quantum mechanics, groups of automorphisms of quantum states have ray representations by unitary and antiunitary operators on complex Hilbert space, in accordance with Wigner's theorem. In the phase-space formulation, they have real, true unitary representations in the space of square-integrable functions on phase space. Each such phase-space representation is a Weyl–Wigner product of the corresponding Hilbert space representation with its contragredient, and these can be recovered by 'factorizing' the Weyl–Wigner product. However, not every real, unitary representation on phase space corresponds to a group of automorphisms, so not every such representation is in the form of a Weyl–Wigner product and can be factorized. The conditions under which this is possible are examined. Examples are presented.

The JK three-product cyclone - performance and potential applications

In spite of their wide application in comminution circuits, hydrocyclones have at least one significant disadvantage in that their operation inherently tends to return the fine denser liberated minerals to the grinding mill. This results in unnecessary overgrinding which adds to the milling cost and can adversely affect the efficiency of downstream processes. In an attempt to solve this problem, a three-product cyclone has been developed at the Julius Kruttschnitt Mineral Research Centre (JKMRC) to generate a second overflow in which the fine dense liberated minerals can be selectively concentrated for further treatment. In this paper, the design and operation of the three-product cyclone are described. The influence of the length of the second vortex finder on the performance of a 150-mm unit treating a mixture of magnetite and silica is investigated. Conventional cyclone tests were also conducted under similar conditions. Using the operational performance data of the three-product and conventional cyclones, it is shown that by optimising the length of the second vortex finder, the amount of fine dense mineral particles that reports to the three-product cyclone underflow can be reduced. In addition, the three-product cyclone can be used to generate middlings stream that may be more suitable for flash flotation than the conventional cyclone underflow, or alternatively, could be classified with a microscreen to separate the valuables from the gangue. At the same time, a fines stream having similar properties to those of the conventional overflow can be obtained. Hence, if the middlings stream was used as feed for flash flotation or microscreening, the fines stream could be used in lieu of the conventional overflow without compromising the feed requirements for the conventional flotation circuit. Some of the other potential applications of the new cyclone are described. (C) 2003 Elsevier Science B.V. All rights reserved.

Product communication strategies: Emotional versus rational communication strategies and attitude change on children consumers

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Ramp-up Predictability - Designing and Prototyping Ramp-up Predictability concept for new product creation

Diplomityön tavoitteena on tutkia ja kehittää menetelmä tuotekehitysprojektin ajalliselle ennustamiselle tuotteen siirtyessä tuotekehityksestä massatuotantoon. Ajallisen ennustamisen merkitys korostuu mitä lähemmäksi uuden tuotteen massatuotannon aloittaminen (ramp-up) tulee, koska strategiset päätökset koskien mm. uusia tuotantolinjoja, materiaalien- ja komponenttien tilaamisia sekä vahvistus asiakastoimitusten aloittamista täytyy tehdä jo paljon aikaisemmin.Työ aloitetaan tutkimalla rinnakkaista insinöörityötä (concurrent engineering) sekä suoritusten mittaamista (performance measurement), joiden sisältämistä ajattelumalleista, työkaluista ja tekniikoista hahmottuivat ajallisen ennustettavuuden onnistumisen edellytykset. Näitä olivat suunnitellun tuotteen ja tuotekehitysprosessin laatu sekä resurssien ja tiimien kompetenssit. Toisaalta ajalliseen ennustettavuuteen vaikuttavat myös projektien riippuvuudet ulkoisista toimittajista ja heidän aikatauluistaan.Teoreettisena viitekehyksenä käytetään Bradford L. Goldense:n luomaa mallia tuotekehityksen proaktiiviseksi mittaamiseksi sekä sovelletaan W. Edward Deming:in jatkuvan parantamisen silmukkaa. Työssä kehitetään Ramp-up Predictability konsepti, joka koostuu keskipitkän ja pitkän aikavälin ennustamisesta. Työhön ei kuulunut mallin käyttöönotto ja seuranta.Toimenpide ehdotuksena esitetään lisätutkimusta mittareiden keskinäisestä korrelaatioista ja niiden luotettavuudesta sekä mallien tarjoamista mahdollisuuksista muille tulosyksiköille.

Image and value of product brand in industrial markets: Case Stora Enso Consumer Packaging Boards

TUTKIMUKSEN TAVOITTEET Tutkielman tavoitteena oli luoda ensin yleiskäsitys tuotemerkkimarkkinoinnin roolista teollisilla markkinoilla, sekä suhdemarkkinoinnin merkityksestä teollisessa merkkituotemarkkinoinnissa. Toisena oleellisena tavoitteena oli kuvata teoreettisesti merkkituoteidentiteetin rakenne teollisessa yrityksessä ja sen vaikutukset myyntihenkilöstöön, ja lisäksi haluttiin tutkia tuotemerkkien lisäarvoa sekä asiakkaalle että myyjälle. Identiteetti ja sen vaikutukset, erityisesti imago haluttiin tutkia myös empiirisesti. LÄHDEAINEISTO JA TUTKIMUSMENETELMÄT Tämän tutkielman teoreettinen osuus perustuu kirjallisuuteen, akateemisiin julkaisuihin ja aikaisempiin tutkimuksiin; keskittyen merkkituotteiden markkinointiin, identiteettiin ja imagoon, sekä suhdemarkkinointiin osana merkkituotemarkkinointia. Tutkimuksen lähestymistapa on kuvaileva eli deskriptiivinen ja sekä kvalitatiivinen että kvantitatiivinen. Tutkimus on tapaustutkimus, jossa caseyritykseksi valittiin kansainvälinen pakkauskartonki-teollisuuden yritys. Empiirisen osuuden toteuttamiseen käytettiin www-pohjaista surveytä, jonka avulla tietoja kerättiin myyntihenkilöstöltä case-yrityksessä. Lisäksi empiiristä osuutta laajennettiin tutkimalla sekundäärilähteitä kuten yrityksen sisäisiä kirjallisia dokumentteja ja tutkimuksia. TULOKSET. Teoreettisen ja empiirisen tutkimuksen tuloksena luotiin malli jota voidaan hyödyntää merkkituotemarkkinoinnin päätöksenteon tukena pakkauskartonki-teollisuudessa. Teollisen brandinhallinnan tulee keskittyä erityisesti asiakas-suhteiden brandaukseen – tätä voisi kutsua teolliseksi suhdebrandaukseksi. Tuote-elementit ja –arvot, differointi ja positiointi, sisäinen yrityskuva ja viestintä ovat teollisen brandi-identiteetin peruskiviä, jotka luovat brandi-imagon. Case-yrityksen myyntihenkilöstön tuote- ja yritysmielikuvat osoittautuivat kokonaisuudessaan hyviksi. Paras imago on CKB tuotteilla, kun taas heikoin on WLC tuotteilla. Teolliset brandit voivat luoda monenlaisia lisäarvoja sekä asiakas- että myyjäyritykselle.

A feature-based object-oriented expert system to model and support product design

In this paper a computer program to model and support product design is presented. The product is represented through a hierarchical structure that allows the user to navigate across the product’s components, and it aims at facilitating each step of the detail design process. A graphical interface was also developed, which shows visually to the user the contents of the product structure. Features are used as building blocks for the parts that compose the product, and object-oriented methodology was used as a means to implement the product structure. Finally, an expert system was also implemented, whose knowledge base rules help the user design a product that meets design and manufacturing requirements.

Service Productization and Product Servitization in The Contract Manufacturing Company

The role of contract manufacturing and subcontracting has been seen in black and white in product and service point of view. It used to be seen either as a product or a service. In the thesis product-service system, offering combining products and services, was discussed. Theory was created from two perspectives; Service productization via Business Model generation and product servitization via New Service Development process. Target for the case study was to point out new ways of service thinking and ways for changing business environment in contract manufacturing, especially in customer satisfaction and profitability point of view. The case study is following the New Service Development process phases. First ideas were collected from literature and via sales management interviews. Service offering and tool for service requirement evaluation was created. Last financial results of example service scenarios were calculated. It is recommended to take service offering into internal use and further develop it into modular service model. It is also recommended to take created customer service requirement evaluation tool into use for capturing customer service needs but also for communicating those internally.

The calculation of force constants and normal co-ordinates--VII Normal co-ordinates in the E species of allene

Force constant and normal co-ordinate calculations are reported for the E species vibrations of the allene molecule. Data on the fundamental vibration frequencies of allene-h4, allene-d4 and allene-1.1-d2 and on the five experimentally determined Coriolis zeta constants of C3H4 and C3D4, were used in a force constant refinement procedure. Allowing for product and sum rules this gives 21 independent data which were used to refine to the most general harmonic force field (10 parameters) with one constraint (in the absence of any constraints the refinement was not satisfactory). The results have been used to calculate the complete ζz Coriolis interaction matrix for the allene-1.1-d2 molecule, and hence to calculate the expected rotational structure of the perpendicular bending vibrations of this molecule; the good agreement obtained with the observed spectra is a check on our results.

Anderson-like Transition for a Class of Random Sparse Models in d >= 2 Dimensions

We show that the Kronecker sum of d >= 2 copies of a random one-dimensional sparse model displays a spectral transition of the type predicted by Anderson, from absolutely continuous around the center of the band to pure point around the boundaries. Possible applications to physics and open problems are discussed briefly.

Algorithms for network design and routing problems

In this thesis we study three combinatorial optimization problems belonging to the classes of Network Design and Vehicle Routing problems that are strongly linked in the context of the design and management of transportation networks: the Non-Bifurcated Capacitated Network Design Problem (NBP), the Period Vehicle Routing Problem (PVRP) and the Pickup and Delivery Problem with Time Windows (PDPTW). These problems are NP-hard and contain as special cases some well known difficult problems such as the Traveling Salesman Problem and the Steiner Tree Problem. Moreover, they model the core structure of many practical problems arising in logistics and telecommunications. The NBP is the problem of designing the optimum network to satisfy a given set of traffic demands. Given a set of nodes, a set of potential links and a set of point-to-point demands called commodities, the objective is to select the links to install and dimension their capacities so that all the demands can be routed between their respective endpoints, and the sum of link fixed costs and commodity routing costs is minimized. The problem is called non- bifurcated because the solution network must allow each demand to follow a single path, i.e., the flow of each demand cannot be splitted. Although this is the case in many real applications, the NBP has received significantly less attention in the literature than other capacitated network design problems that allow bifurcation. We describe an exact algorithm for the NBP that is based on solving by an integer programming solver a formulation of the problem strengthened by simple valid inequalities and four new heuristic algorithms. One of these heuristics is an adaptive memory metaheuristic, based on partial enumeration, that could be applied to a wider class of structured combinatorial optimization problems. In the PVRP a fleet of vehicles of identical capacity must be used to service a set of customers over a planning period of several days. Each customer specifies a service frequency, a set of allowable day-combinations and a quantity of product that the customer must receive every time he is visited. For example, a customer may require to be visited twice during a 5-day period imposing that these visits take place on Monday-Thursday or Monday-Friday or Tuesday-Friday. The problem consists in simultaneously assigning a day- combination to each customer and in designing the vehicle routes for each day so that each customer is visited the required number of times, the number of routes on each day does not exceed the number of vehicles available, and the total cost of the routes over the period is minimized. We also consider a tactical variant of this problem, called Tactical Planning Vehicle Routing Problem, where customers require to be visited on a specific day of the period but a penalty cost, called service cost, can be paid to postpone the visit to a later day than that required. At our knowledge all the algorithms proposed in the literature for the PVRP are heuristics. In this thesis we present for the first time an exact algorithm for the PVRP that is based on different relaxations of a set partitioning-like formulation. The effectiveness of the proposed algorithm is tested on a set of instances from the literature and on a new set of instances. Finally, the PDPTW is to service a set of transportation requests using a fleet of identical vehicles of limited capacity located at a central depot. Each request specifies a pickup location and a delivery location and requires that a given quantity of load is transported from the pickup location to the delivery location. Moreover, each location can be visited only within an associated time window. Each vehicle can perform at most one route and the problem is to satisfy all the requests using the available vehicles so that each request is serviced by a single vehicle, the load on each vehicle does not exceed the capacity, and all locations are visited according to their time window. We formulate the PDPTW as a set partitioning-like problem with additional cuts and we propose an exact algorithm based on different relaxations of the mathematical formulation and a branch-and-cut-and-price algorithm. The new algorithm is tested on two classes of problems from the literature and compared with a recent branch-and-cut-and-price algorithm from the literature.

Process orientation and information technology:customer engagement at Xerox (UK) Ltd

Xerox Customer Engagement activity is informed by the "Go To Market" strategy, and "Intelligent Coverage" sales philosophy. The realisation of this philosophy necessitates a sophisticated level of Market Understanding, and the effective integration of the direct channels of Customer Engagement. Sophisticated Market Understanding requires the mapping and coding of the entire UK market at the DMU (Decision Making Unit) level, which in turn enables the creation of tailored coverage prescriptions. Effective Channel Integration is made possible by the organisation of Customer Engagement work according to a single, process defined structure: the Selling Process. Organising by process facilitates the discipline of Task Substitution, which leads logically to creation of Hybrid Selling models. Productive Customer Engagement requires Selling Process specialisation by industry sector, customer segment and product group. The research shows that Xerox's Market Database (MDB) plays a central role in delivering the Go To Market strategic aims. It is a tool for knowledge based selling, enables productive SFA (Sales Force Automation) and, in sum, is critical to the efficient and effective deployment of Customer Engagement resources. Intelligent Coverage is not possible without the MDB. Analysis of the case evidence has resulted in the definition of 60 idiographic statements. These statements are about how Xerox organise and manage three direct channels of Customer Engagement: Face to Face, Telebusiness and Ebusiness. Xerox is shown to employ a process-oriented, IT-enabled, holistic approach to Customer Engagement productivity. The significance of the research is that it represents a detailed (perhaps unequalled) level of rich description of the interplay between IT and a holistic, process-oriented management philosophy.

Relationship between Extremal and Sum Processes Generated by the same Point Process

2000 Mathematics Subject Classification: Primary 60G51, secondary 60G70, 60F17.

New product development proficiency and multi-country product rollout timeliness

Purpose: The purpose of this paper is to address a gap in the understanding of the indirect effects of marketing and technical factors on time efficiency in developing a new product and international new product launch. Design/methodology/approach: This paper adopts a contingency perspective in examining the relationships between antecedents and on-time completion (or timeliness) of new product development (NPD) and international new product rollout (INPR). A conceptual framework is tested based on data obtained on 232 NPD projects undertaken by Korean firms. Findings: The results show that NPD proficiencies mediate to a greater or lesser extent the effects of key antecedents (e.g. cross-functional linkages, project fit with available marketing resources, and effective coordination of headquarters-subsidiary/agents' activities) on timeliness in NPD and INPR. Research limitations/implications: Empirical research on the role of marketing and technical proficiencies in improving NPD timeliness and rollout timeliness in the context of international NPD affirms the importance of adopting a contingency perspective in examining the antecedents of NPD and multi-market entry timeliness. Practical implications: This paper lends insight into the role of overseas subsidiaries or agents in helping to build the technical proficiencies of emerging country companies. Originality/value: This is the first review focusing on the mediating influences on time dimensions (e.g. timeliness) in multi-country product launches. © Emerald Group Publishing Limited.

Learning user and product distributed representations using a sequence model for sentiment analysis

In product reviews, it is observed that the distribution of polarity ratings over reviews written by different users or evaluated based on different products are often skewed in the real world. As such, incorporating user and product information would be helpful for the task of sentiment classification of reviews. However, existing approaches ignored the temporal nature of reviews posted by the same user or evaluated on the same product. We argue that the temporal relations of reviews might be potentially useful for learning user and product embedding and thus propose employing a sequence model to embed these temporal relations into user and product representations so as to improve the performance of document-level sentiment analysis. Specifically, we first learn a distributed representation of each review by a one-dimensional convolutional neural network. Then, taking these representations as pretrained vectors, we use a recurrent neural network with gated recurrent units to learn distributed representations of users and products. Finally, we feed the user, product and review representations into a machine learning classifier for sentiment classification. Our approach has been evaluated on three large-scale review datasets from the IMDB and Yelp. Experimental results show that: (1) sequence modeling for the purposes of distributed user and product representation learning can improve the performance of document-level sentiment classification; (2) the proposed approach achieves state-of-The-Art results on these benchmark datasets.

Microsatellite Markers For Urochloa Humidicola (poaceae) And Their Transferability To Other Urochloa Species.

Urochloa humidicola is a warm-season grass commonly used as forage in the tropics and is recognized for its tolerance to seasonal flooding. This grass is an important forage species for the Cerrado and Amazon regions of Brazil. U. humidicola is a polyploid species with variable ploidy (6X-9X) and facultative apomixis with high phenotypic plasticity. However, this apomixis and ploidy, as well as the limited knowledge of the genetic basis of the germplasm collection, have constrained genetic breeding activities, yet microsatellite markers may enable a better understanding of the species' genetic composition. This study aimed to develop and characterize new polymorphic microsatellite molecular markers in U. humidicola and to evaluate their transferability to other Urochloa species. A set of microsatellite markers for U. humidicola was identified from two new enriched genomic DNA libraries: the first library was constructed from a single sexual genotype and the second from a pool of eight apomictic genotypes selected on the basis of previous results. Of the 114 loci developed, 72 primer pairs presented a good amplification product, and 64 were polymorphic among the 34 genotypes tested. The number of bands per simple sequence repeat (SSR) locus ranged from 1 to 29, with a mean of 9.6 bands per locus. The mean polymorphism information content (PIC) of all loci was 0.77, and the mean discrimination power (DP) was 0.87. STRUCTURE analysis revealed differences among U. humidicola accessions, hybrids, and other Urochloa accessions. The transferability of these microsatellites was evaluated in four species of the genus, U. brizantha, U. decumbens, U. ruziziensis, and U. dictyoneura, and the percentage of transferability ranged from 58.33% to 69.44% depending on the species. This work reports new polymorphic microsatellite markers for U. humidicola that can be used for breeding programs of this and other Urochloa species, including genetic linkage mapping, quantitative trait loci identification, and marker-assisted selection.