987 resultados para IDS
Resumo:
Iodothyronine deiodinases (IDs) are mammalian selenoenzymes that play an important role in the activation and inactivation pound of thyroid hormones. It is known that iodothyronamines (TnAMs), produced by the decarboxylation of thyroid hormones, act as substrates for deiodinases. To understand whether decarboxylation alters the rate and/or regioselectivity of deiodination by using synthetic deiodinase mimics, we studied the deiodination of different iodothyronamines. The triiodo derivative 3,3',5-triiodothyronamine (T3AM) is deiodinated at the inner ring by naphthyl-based deiodinase mimics, which is similar to the deiodination of 3,3',5-triiodothyronine (T3). However, T3AM under-goes much slower deiodination than T3. Detailed experimental and theoretical investigations suggest that T3AM forms a weaker halogen bond with selenium donors than T3. Kinetic studies and single-crystal X-ray structures of T3 and T3AM reveal that intermolecular I center dot center dot center dot I interactions may play an important role in deiodination. The formation of hydrogen- and halogen-bonding assemblies, which leads to the formation of a dimeric species of T3 in solution, facilitates the interactions between the selenium and iodine atoms. In contrast, T3AM, which does not have I center dot center dot I interactions, undergoes much slower deiodination.
Resumo:
A routing protocol in a mobile ad hoc network (MANET) should be secure against both the outside attackers which do not hold valid security credentials and the inside attackers which are the compromised nodes in the network. The outside attackers can be prevented with the help of an efficient key management protocol and cryptography. However, to prevent inside attackers, it should be accompanied with an intrusion detection system (IDS). In this paper, we propose a novel secure routing with an integrated localized key management (SR-LKM) protocol, which is aimed to prevent both inside and outside attackers. The localized key management mechanism is not dependent on any routing protocol. Thus, unlike many other existing schemes, the protocol does not suffer from the key management - secure routing interdependency problem. The key management mechanism is lightweight as it optimizes the use of public key cryptography with the help of a novel neighbor based handshaking and Least Common Multiple (LCM) based broadcast key distribution mechanism. The protocol is storage scalable and its efficiency is confirmed by the results obtained from simulation experiments.
Resumo:
The ACT workshop "Enabling Sensor Interoperability" addressed the need for protocols at the hardware, firmware, and higher levels in order to attain instrument interoperability within and between ocean observing systems. For the purpose of the workshop, participants spoke in tern of "instruments" rather than "sensors," defining an instrument as a device that contains one or more sensors or actuators and can convert signals from analog to digital. An increase in the abundance, variety, and complexity of instruments and observing systems suggests that effective standards would greatly improve "plug-and-work" capabilities. However, there are few standards or standards bodies that currently address instrument interoperability and configuration. Instrument interoperability issues span the length and breadth of these systems, from the measurement to the end user, including middleware services. There are three major components of instrument interoperability including physical, communication, and application/control layers. Participants identified the essential issues, current obstacles, and enabling technologies and standards, then came up with a series of short and long term solutions. The top three recommended actions, deemed achievable within 6 months of the release of this report are: A list of recommendations for enabling instrument interoperability should be put together and distributed to instrument developers. A recommendation for funding sources to achieve instrument interoperability should be drafted. Funding should be provided (for example through NOPP or an IOOS request for proposals) to develop and demonstrate instrument interoperability technologies involving instrument manufacturers, observing system operators, and cyberinfrastructure groups. Program managers should be identified and made to understand that milestones for achieving instrument interoperability include a) selection of a methodology for uniquely identifying an instrument, b) development of a common protocol for automatic instrument discovery, c) agreement on uniform methods for measurements, d) enablement of end user controlled power cycling, and e) implementation of a registry component for IDS and attributes. The top three recommended actions, deemed achievable within S years of the release of this report are: An ocean observing interoperability standards body should be established that addresses standards for a) metadata, b) commands, c) protocols, d) processes, e) exclusivity, and f) naming authorities.[PDF contains 48 pages]
Resumo:
A Atenção Primária à Saúde - APS é reconhecida como o nível fundamental e porta de entrada do sistema de atenção à saúde, sendo o lugar adequado onde pode ser atendida e resolvida a maior parte dos problemas de saúde. É considerada pela OMS como a principal proposta de modelo assistencial. Essa importância da APS leva a necessidade de pesquisas avaliativas dos seus resultados para adequação e melhoria de políticas e planos de ação delineados em relação à mesma. Pesquisas internacionais e nacionais são realizadas, nas quais indicadores relativos às atividades hospitalares estão sendo empregados com o objetivo de medir resultados como efetividade e acesso da APS. Um desses indicadores, desenvolvido por John Billings da Universidade de Nova York, na década de 90, consiste nas condições pelas quais as internações hospitalares por Condições Sensíveis à Atenção Ambulatorial (CSAA) deveriam ser evitadas caso os serviços da APS fossem efetivos e acessíveis. Utilizando-se o SIH-AIH/2008 e a lista brasileira de Internações por Condições Sensíveis a Atenção Primária, publicada em 2008, a proposta do presente trabalho é a de estudar os cuidados primários à saúde baseando-se nas ICSAA, na área urbana da cidade de Juiz de Fora-MG. Buscou-se responder sobre os efeitos que ocorrem nessas internações a partir das características individuais dos pacientes, das características das Unidades Básicas de Saúde-UBS (infraestrutura, produção e modelos assistenciais) e das condições sócio-econômicas/ambientais das áreas cobertas por UAPS e descobertas (sem UAPS), com a utilização de modelos multiníveis logísticos com intercepto aleatório. Buscou-se conhecer, também, a distribuição espacial das taxas padronizadas por idade das ICSAA nessas áreas e suas associações com as variáveis contextuais, utilizando-se ferramentas da análise espacial. Os resultados do presente trabalho mostraram que a porcentagem de internações por CSAA, foi de 4,1%. Os modelos assistenciais ESF e o Modelo Tradicional, base da organização da atenção primária no Brasil, não apresentaram no município, impacto significativo nas ICSAA, somente na forma de áreas descobertas tendo como referência as áreas cobertas. Também não foram significativas as variáveis de infraestrutura e produção das UAPS. Os efeitos individuais (idade e sexo) nas ICSAA foram significativos, apresentando probabilidades de significância menores que 1%, o mesmo acontecendo com o Índice de Desenvolvimento Social-IDS, que contempla as condições sociais, econômicas e ambientais das áreas analisadas. A distribuição espacial das taxas padronizadas por idade apresentou padrão aleatório e os testes dos Multiplicadores de Lagrange não foram significativos indicando o modelo de regressão clássico (MQO) como adequado para explicar as taxas em função das variáveis contextuais. Para a análise conjunta das áreas cobertas e descobertas foram fatores de risco: a variável econômica (% dos domicílios com renda até 2 SM), áreas descobertas tendo como referência as áreas cobertas e a região nordeste do município. Para as áreas cobertas as variáveis de produção das UAPS, econômica e a região nordeste apresentaram como fator de risco para as taxas de internação por CSAA.
Resumo:
170 p.
Resumo:
Diversos estudos em epidemiologia têm investigado a influência do ambiente urbano na saúde da população. Os benefícios dos espaços verdes têm sido um dos aspectos estudados recentemente. Uma das principais vias apontadas é através da promoção da prática de atividades físicas. Outros benefícios incluem a melhoria das condições psicossociais e da qualidade do ar. Esses fatores, por sua vez, têm comprovada associação com a saúde cardiovascular. Nesse sentido, o objetivo deste trabalho é investigar a associação entre espaços verdes e mortalidade por doenças isquêmicas do coração (DIC) e doenças cerebrovasculares (DCBV) no município do Rio de Janeiro, entre os anos de 2010 e 2012. Foi realizado um estudo do tipo ecológico, tendo os setores censitários como unidade de análise. Como variável desfecho foi calculada a razão de mortalidade padronizada (RMP) por sexo e idade, pelo método indireto. Como medidas de exposição às áreas verdes foram utilizadas a média e a variabilidade do Índice de Vegetação por Diferença Normalizada ou NDVI (sigla em inglês) médio referente ao período de estudo, em buffers de 100 metros das bordas dos setores censitários. Os dados foram analisados por um modelo linear condicional autorregressivo, que considera também a estrutura de dependência espacial. Foram incluídas no modelo as covariáveis Índice de Desenvolvimento Social (IDS); densidade de vias de tráfego veicular, divididas entre vias coletoras e locais e vias estruturais primárias e secundárias, utilizadas como proxy de poluição em buffers de 100 metros dos setores; e o indicador de setores censitários litorâneos. Após o ajuste do modelo controlando os possíveis fatores de confusão, foi verificada a redução de 4,5% (CI95%: 7,3%, 1,6%) da mortalidade nas áreas com exposição referente ao intervalo interquartílico mais alto da média do NDVI; e de 3,4% (IC95%: 6,2%; 0,7%) nas áreas referentes ao intervalo interquartílico mais alto da variabilidade, ambos em comparação com o intervalo mais baixo. Esse resultado indica a associação inversa entre a exposição aos espaços verdes e a mortalidade por DIC e DCBV no município do Rio de Janeiro. Além disso, o aumento da mortalidade está associado a piores condições de vida e à poluição do ar.
Resumo:
Proximate composition, lipid and fatty acid components of dried mussel and changes in lipids during 1 year storage were studied. Male mussel contained lower fat contents and higher contents of polyunsaturated fatty acids of C20:5n-3, and C22:6n-3. High percentages of Cl6:1, Cl7:1, Cl8:3n-3, C20:3n-8 existed in NL and C!6:0, C18:0, Cl8:1n-9, C20:2n-6, C20:5n- 3, C22:6n-3 were very rich in PL. Triglycerides phosphatidylcholine, cholesterol were major components of mussel lipids. Free fatty acids (FFA) increased greatly and phospholipids decreased during storage, saturated fatty acids showed an increase trend and polyunsaturated fatty adds decreased differently. Dried mussels were vacuum packed and air packed and packaging methods had a great influence on the oxidation of mussellip,ids, indicating preference of vacuum packaging.
Resumo:
Numerical calculations within the envelope function framework have been performed to analyze the relations between the magnitude of in-plane optical anisotropy and the values of the additional hole-mixing coefficients due to interface and electric field in (001) symmetric GaAs/AlxGa1-xAs superlattices for light propagating along the [001] direction. It is found that the heavy- and light-hole states are mixed independently by interface and electric field. The numeric results demonstrate that the line shape of the in-plane anisotropic spectrum is determined by the ratio of the two hole-mixing coefficients. Theoretical analysis shows that with the help of simple calculation of the anisotropy at k=0, reliable values of the hole-mixing coefficients can be determined by reflectance-difference spectroscopy (IDS) technique, demanding no tedious fitting of experimental curves. The in-plane optical anisotropy measured by RDS provides a new method of getting the information on buried interfaces through the Value of the hole-mixing coefficient due to interface.
Resumo:
采用在SIMOX圆片埋氧层中注入氟(F)离子的方法改善SIMOX的抗总剂量辐射能力,通过比较未注F样品和注F样品辐照前后SIMOX器件Ids-Vgs特性和阈值电压,发现F具有抑制辐射感生pMOSFET和nMOSFET阈值电压漂移的能力,并且可以减小nMOSFET中由辐照所产生的漏电流.说明在SOI材料中前后Si/SiO2界面处的F可以减少空穴陷阱密度,有助于提高SIMOX的抗总剂量辐射能力.
Resumo:
The consequence of activation status or gain/loss of an X-chromosome in terms of the expression of tumor suppressor genes or oncogenes in breast cancer has not been clearly addressed. In this study, we investigated the activation status of the X-chromosomes in a panel of human breast cancer cell lines, human breast carcinoma, and adjacent mammary tissues and a panel of murine mammary epithelial sublines ranging from low to high invasive potentials. Results show that most human breast cancer cell lines were homozygous, but both benign cell lines were heterozygous for highly polymorphic X-loci (IDS and G6PD). On the other hand, 60% of human breast carcinoma cases were heterozygous for either IDS or G6PD markers. Investigation of the activation status of heterozygous cell lines revealed the presence of only one active X-chromosome, whereas most heterozygous human breast carcinoma cases had two active X-chromosomes. Furthermore, we determined whether or not an additional active X-chromosome affects expression levels of tumor suppressor genes and oncogenes. Reverse transcription-PCR data show high expression of putative tumor suppressor genes Rsk4 and RbAp46 in 47% and 79% of breast carcinoma cases, respectively, whereas Cldn2 was down-regulated in 52% of breast cancer cases compared with normal adjacent tissues. Consistent with mRNA expression, immunostaining for these proteins also showed a similar pattern. In conclusion, our data suggest that high expression of RbAp46 is likely to have a role in the development or progression of human breast cancer. The activation status of the X-chromosome may influence the expression levels of X-linked oncogenes or tumor suppressor genes.
Resumo:
O estado do Parana apresenta uma diversidade de clima, com invernos irregulares em relacao a precipitacoes pluviometricas e ocorrencia de geadas, e tambem, com relacao aos tipos de solos, que influem na adaptacao e no desempenho dos genotipos de trigo. Em vista disto, ha necessidade de um maior numero de cultivares, com caracteristicas diferenciadas para serem utilizadas pelos produtores. O presente trabalho tem por objetivo avaliar, nas zonas A e B, em solos com ate 5% de saturacao de aluminio, os novos genotipos de trigo criados pelas diferentes instituicoes que desenvolvem trabalhos de melhoramento genetico de trigo. Esta avaliacao e realizada pelo Instituto Agronomico do Parana (IAPAR), pelo Centro Nacional de Pesquisa de Soja (Embrapa Soja) e pela Cooperativa Central de Desenvolvimento Tecnologico e Economico (COODETEC), atraves da instalacao de diferentes ensaios de competicao de genotipos. Os resultados aqui relatados sao resultantes de dez experimentos do Ensaio Intermediario Paranaense (IPS), doze experimentos do Ensaio Centro-Sul Brasileiro (CSBS) e onze experimentos do Ensaio de Cultivares em Cultivo (ECS), para solos com ate 5% de saturacao de aluminio, instalados em 1996, em diferentes epocas, nas localidade de Cambara, Londrina, Engenheiro Beltrao, Palotina e Sao Miguel do Iguacu. Devido a longa estiagem ocorrida no periodo de abril a julho, no Norte do estado (zona A1), alguns experimentos foram prejudicados e, outros perdidos. Em Londrina e Palotina, os experimentos receberam irrigacoes na fase inicial para propiciar uma boa germinacao e desenvolvimento das plantas. A incidencia de molestias foi baixa, em ambas as zonas predominando no entanto, uma razoavel infeccao de oidio, nas semeaduras mais tardias, e de ferrugem da folha. Observou-se uma variabilidade dos genotipos quanto ao grau de tolerancia e/ou suscetibilidade a estas molestias, como tambem, uma resposta no rendimento de graos ao controle destas, pelo uso de fungicidas especificos. Os rendimentos obtidos, em geral, foram muitos bons, alcancando, em alguns casos, a 6,7 t/ha. No ensaio IPS, em funcao do rendimento de graos e outras caracteristicas, foram selecionadas as linhagens IA 952, IWT 9430, LD 941, LD 946, OC 962, OC 963, OC 965, ORL 92203 e PR 961. NO CSBS, foram mantidas as linhagens IOR 90226 e PF 91450. No ECS, destacaram-se, em ambas as zonas, as cultivares IAPAR 60, IAPAR 78 e OR 1. Considerando os resultados de rendimentos de graos e outras caracteristicas agronomicas e, principalmente, a qualidade da farinha para panificacao, foram recomendadas como novas cultivares, as linhagens IDS 934-21 e OC 939, denominadas, respectivamente, de Manitoba 97 e COODETEC 101.
Resumo:
This dissertation describes a model for acoustic propagation in inhomogeneous flu- ids, and explores the focusing by arrays onto targets under various conditions. The work explores the use of arrays, in particular the time reversal array, for underwater and biomedical applications. Aspects of propagation and phasing which can lead to reduced focusing effectiveness are described. An acoustic wave equation was derived for the propagation of finite-amplitude waves in lossy time-varying inhomogeneous fluid media. The equation was solved numerically in both Cartesian and cylindrical geometries using the finite-difference time-domain (FDTD) method. It was found that time reversal arrays are sensitive to several debilitating factors. Focusing ability was determined to be adequate in the presence of temporal jitter in the time reversed signal only up to about one-sixth of a period. Thermoviscous absorption also had a debilitating effect on focal pressure for both linear and nonlinear propagation. It was also found that nonlinearity leads to degradation of focal pressure through amplification of the received signal at the array, and enhanced absorption in the shocked waveforms. This dissertation also examined the heating effects of focused ultrasound in a tissue-like medium. The application considered is therapeutic heating for hyperther- mia. The acoustic model and a thermal model for tissue were coupled to solve for transient and steady temperature profiles in tissue-like media. The Pennes bioheat equation was solved using the FDTD method to calculate the temperature fields in tissue-like media from focused acoustic sources. It was found that the temperature-dependence of the medium's background prop- erties can play an important role in the temperature predictions. Finite-amplitude effects contributed excess heat when source conditions were provided for nonlinear ef- fects to manifest themselves. The effect of medium heterogeneity was also found to be important in redistributing the acoustic and temperature fields, creating regions with hotter and colder temperatures than the mean by local scattering and lensing action. These temperature excursions from the mean were found to increase monotonically with increasing contrast in the medium's properties.
Resumo:
Wireless Intrusion Detection Systems (WIDS) monitor 802.11 wireless frames (Layer-2) in an attempt to detect misuse. What distinguishes a WIDS from a traditional Network IDS is the ability to utilize the broadcast nature of the medium to reconstruct the physical location of the offending party, as opposed to its possibly spoofed (MAC addresses) identity in cyber space. Traditional Wireless Network Security Systems are still heavily anchored in the digital plane of "cyber space" and hence cannot be used reliably or effectively to derive the physical identity of an intruder in order to prevent further malicious wireless broadcasts, for example by escorting an intruder off the premises based on physical evidence. In this paper, we argue that Embedded Sensor Networks could be used effectively to bridge the gap between digital and physical security planes, and thus could be leveraged to provide reciprocal benefit to surveillance and security tasks on both planes. Toward that end, we present our recent experience integrating wireless networking security services into the SNBENCH (Sensor Network workBench). The SNBENCH provides an extensible framework that enables the rapid development and automated deployment of Sensor Network applications on a shared, embedded sensing and actuation infrastructure. The SNBENCH's extensible architecture allows an engineer to quickly integrate new sensing and response capabilities into the SNBENCH framework, while high-level languages and compilers allow novice SN programmers to compose SN service logic, unaware of the lower-level implementation details of tools on which their services rely. In this paper we convey the simplicity of the service composition through concrete examples that illustrate the power and potential of Wireless Security Services that span both the physical and digital plane.
Resumo:
Purpose: The purpose of this paper is to examine the extent and nature of greening the supply chain (SC) in the UK manufacturing sector; and the factors that influence the breadth and depth of this activity.
Design/methodology/approach: Based on the findings from a sample of manufacturing organisations drawn from the membership of The Chartered Institute for Purchasing and Supply. Data are collected using a questionnaire, piloted and pre-tested before distribution with responses from 60 manufacturing companies.
Findings: On average manufacturers perceive the greatest pressure to improve environmental performance through legislation and internal drivers (IDs). The least influential pressures are related to societal drivers and SC pressures from individual customers. Green supply chain management (GSCM) practices amongst this “average” group of UK manufacturing organisations are focusing on internal, higher risk, descriptive activities, rather than proactive, external engagement processes. Environmental attitude (EA) is a key predictor of GSCM activity and those organisations that have a progressive attitude are also operationally very active. EA shows some relationship to legislative drivers but other factors are also influential. Operational activity may also be moderated by organisational contingencies such as risk, size, and nationality.
Research limitations/implications: The main limitation to this paper is the relatively small manufacturing sample.
Practical implications: This paper presents a series of constructs that identify GSCM operational activities companies to benchmark themselves against. It suggests which factors are driving these operational changes and how industry contingencies may be influential.
Originality/value: This paper explores what is driving environmental behaviour amongst an “average” sample of manufacturers, what specific management practices take place and the relationships between them.
Keywords: Manufacturing industries, Environmental management, Supply chain management, Sustainable development, United Kingdom
Paper type: Research paper
Resumo:
The Intrusion Detection System (IDS) is a common means of protecting networked systems from attack or malicious misuse. The deployment of an IDS can take many different forms dependent on protocols, usage and cost. This is particularly true of Wireless Intrusion Detection Systems (WIDS) which have many detection challenges associated with data transmission through an open, shared medium, facilitated by fundamental changes at the Physical and MAC layers. WIDS need to be considered in more detail at these lower layers than their wired counterparts as they face unique challenges. The remainder of this chapter will investigate three of these challenges where WiFi deviates significantly from that of wired counterparts:
• Attacks Specific to WiFi Networks: Outlining the additional threats which WIDS must account for: Denial of Service, Encryption Bypass and AP Masquerading attacks.
• The Effect of Deployment Architecture on WIDS Performance: Demonstrating that the deployment environment of a network protected by a WIDS can influence the prioritisation of attacks.
• The Importance of Live Data in WiFi Research: Investigating the different choices for research data sources with an emphasis on encouraging live network data collection for future WiFi research.