Estudo da compatibilidade eletromagnética em placa de circuito impresso de centrais telefônicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da suscetibilidade eletromagnética dos cabos metálicos dos sistemas de supervisão, proteção, comunicação e controle de subestações de alta tensão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reatores eletrônicos para sistemas de iluminação com múltiplas lâmpadas tubulares fluorescentes com controle de luminosidade, elevada eficiência e elevado fator de potência

Pós-graduação em Engenharia Elétrica - FEIS

Using Equivalent Emission Sources to Evaluate the Coupling Between Components

The electromagnetic interference between the electronic systems or their components influences the performance of the systems. For that reason, it is important to model these interferences in order to optimize the position of the systems or their components. In this paper, a method is proposed to construct the equivalent emission source models of systems. The proposed method is based on the multipolar expansion by representing the radiated emission of generic structures in a spherical reference (r, theta, phi). Some results are presented illustrating our method.

Polyphase drive systems configuration aiming EMI mitigation

Topologies of motor drive systems are studied, aiming the reduction of common-mode (CM) currents. Initially, the aspects concerning the CM currents circulation are analysed. The reason of common-mode voltages generation, the circulating paths for the resulting CM currents and their effects are discussed. Then, a non-conventional drive system configuration is proposed in order to reduce the CM currents and their effects. This configuration comprehends a non-conventional inverter module wired to a motor with an unusual connection. The cables arrangement differs from the standard solution, too. The proposed topology is compared with other ones, like the active circuit for common-mode voltages compensation. The contribution of the configuration to the reduction of CM voltages and currents and their related interferences are evaluated, based on numerical simulations. Some results are presented and discussed regarding the suitability of the proposed configuration as a potential solution to reduce the CM currents effects, when the state of art and implementation cost of drives are taken into account.

Análisis de bocinas en MatLab

El presente proyecto parte de un programa utilizado en las prácticas de laboratorio en la asignatura Antenas y Compatibilidad Electromagnética del sexto semestre llamado SABOR, que pretende ser actualizado para que en las nuevas versiones de los sistemas operativos ofrecidos por la compañía Windows pueda ser operativo. El objetivo principal será diseñar e implementar nuevas funcionalidades así como desarrollar mejoras y corregir errores del mismo. Para su mejor entendimiento se ha creado una herramienta en entorno MATLAB para analizar uno de los tipos más comunes de Apertura que se utilizan actualmente, las bocinas. Dicha herramienta es una interfaz gráfica que tiene como entradas las variables elementales de diseño de la apertura como por ejemplo: dimensiones de la propia bocina o los parámetros generales comunes a todas ellas. A su vez, el software nos genera algunos de los parámetros de salida fundamentales de las antenas: Directividad, Ancho de haz, Centro de fase y Spillover. Para el correcto desarrollo del software se ha realizado numerosas pruebas con el fin de depurar y corregir errores con respecto a la anterior versión del SABOR. Por otra parte se ha hecho también hincapié en la funcionalidad del programa para que sea más intuitivo y evitar complejidades. El tipo de antena que se pretende estudiar es la bocina que consiste en una guía de onda en la cual el área de la sección se va incrementando progresivamente hasta un extremo abierto, que se comporta como una apertura. Se utilizan extensamente en satélites comerciales para coberturas globales desde órbitas geoestacionarias, pero el uso más común es como elemento de radiación para reflectores de antenas. Los tipos de bocinas que se van a examinar en la herramienta son: Sectorial H, Sectorial E, Piramidal, Cónica, Cónica Corrugada y Piramidal Corrugada. El proyecto está desarrollado de manera que pueda servir de información teórico-práctico de todo el software SABOR. Por ello, el documento además de revisar la teoría de las bocinas analizadas, mostrará la información relacionada con la programación orientado a objetos en entorno MATLAB cuyo objetivo propio es adquirir una nueva forma de pensamiento acerca del proceso de descomposición de problemas y desarrollo de soluciones de programación. Finalmente se ha creado un manual de autoayuda para dar soporte al software y se han incluido los resultados de diversas pruebas realizadas para poder observar todos los detalles de su funcionamiento, así como las conclusiones y líneas futuras de acción. ABSTRACT This Project comes from a program used in the labs of the subject Antennas and Electromagnetic Compatibility in the sixth semester called SABOR, which aims to be updated in order to any type of computer running a Windows operating systems(Windows 7 and subsequent versions). The main objectives are design and improve existing functionalities and develop new features. In addition, we will correct mistakes in earlier versions. For a better understanding a new custom tool using MATLAB environment has been created to analyze one of the most common types of apertura antenna which is used for the moment, horns. This tool is a graphical interface that has elementary design variables as a inputs, for example: Dimensions of the own horn or common general parameters of all horns. At the same time, the software generate us some of the fundamental parameters of antennas output like Directivity, Beamwidth, Phase centre and Spillover. This software has been performed numerous tests for the proper functioning of the Software and we have been cared in order to debug and correct errors that were detected in earlier versions of SABOR. In addition, it has also been emphasized the program's functionality in order to be more intuitive and avoiding unnecessary barriers or complexities. The type of antenna that we are going to study is the horn which consists of a waveguides which the section area has been gradually increasing to an open-ended, that behaves as an aperture. It is widely used in comercial satellites for global coverage from geostationary orbits. However, the most common use is radiating element for antenna reflectors. The types of horns which is going to be considered are: Rectangular H-plane sectorial, Rectangular E-plane sectorial, Rectangular Pyramidal, Circular, Corrugated Circular and Corrugated Pyramidal. The Project is developed so that it can be used as practical-theorical information around the SABOR software. Therefore, In addition to thoroughly reviewing the theory document of analyzed horns, it display information related to the object-oriented programming in MATLAB environment whose goal leads us to a new way of thinking about the process of decomposition of problems and solutions development programming. Finally, it has been created a self-help manual in order to support the software and has been included the results of different tests to observe all the details of their operations, as well as the conclusions and future action lines.

Asynchronus design for improved EMC behavior of ICs

International audience

Quasi delay insensitive asynchronous circuits for low EMI

International audience

A hybrid approach for resolving the electromagnetic fields inside a waveguide loaded with a lossy medium

In this work a novel hybrid approach is presented that uses a combination of both time domain and frequency domain solution strategies to predict the power distribution within a lossy medium loaded within a waveguide. The problem of determining the electromagnetic fields evolving within the waveguide and the lossy medium is decoupled into two components, one for computing the fields in the waveguide including a coarse representation of the medium (the exterior problem) and one for a detailed resolution of the lossy medium (the interior problem). A previously documented cell-centred Maxwell’s equations numerical solver can be used to resolve the exterior problem accurately in the time domain. Thereafter the discrete Fourier transform can be applied to the computed field data around the interface of the medium to estimate the frequency domain boundary condition in-formation that is needed for closure of the interior problem. Since only the electric fields are required to compute the power distribution generated within the lossy medium, the interior problem can be resolved efficiently using the Helmholtz equation. A consistent cell-centred finite-volume method is then used to discretise this equation on a fine mesh and the underlying large, sparse, complex matrix system is solved for the required electric field using the iterative Krylov subspace based GMRES iterative solver. It will be shown that the hybrid solution methodology works well when a single frequency is considered in the evaluation of the Helmholtz equation in a single mode waveguide. A restriction of the scheme is that the material needs to be sufficiently lossy, so that any penetrating waves in the material are absorbed.

The conceptual and operational compatibility of data breach notification and information privacy laws

Mandatory data breach notification laws are a novel and potentially important legal instrument regarding organisational protection of personal information. These laws require organisations that have suffered a data breach involving personal information to notify those persons that may be affected, and potentially government authorities, about the breach. The Australian Law Reform Commission (ALRC) has proposed the creation of a mandatory data breach notification scheme, implemented via amendments to the Privacy Act 1988 (Cth). However, the conceptual differences between data breach notification law and information privacy law are such that it is questionable whether a data breach notification scheme can be solely implemented via an information privacy law. Accordingly, this thesis by publications investigated, through six journal articles, the extent to which data breach notification law was conceptually and operationally compatible with information privacy law. The assessment of compatibility began with the identification of key issues related to data breach notification law. The first article, Stakeholder Perspectives Regarding the Mandatory Notification of Australian Data Breaches started this stage of the research which concluded in the second article, The Mandatory Notification of Data Breaches: Issues Arising for Australian and EU Legal Developments (‘Mandatory Notification‘). A key issue that emerged was whether data breach notification was itself an information privacy issue. This notion guided the remaining research and focused attention towards the next stage of research, an examination of the conceptual and operational foundations of both laws. The second article, Mandatory Notification and the third article, Encryption Safe Harbours and Data Breach Notification Laws did so from the perspective of data breach notification law. The fourth article, The Conceptual Basis of Personal Information in Australian Privacy Law and the fifth article, Privacy Invasive Geo-Mashups: Privacy 2.0 and the Limits of First Generation Information Privacy Laws did so for information privacy law. The final article, Contextualizing the Tensions and Weaknesses of Information Privacy and Data Breach Notification Laws synthesised previous research findings within the framework of contextualisation, principally developed by Nissenbaum. The examination of conceptual and operational foundations revealed tensions between both laws and shared weaknesses within both laws. First, the distinction between sectoral and comprehensive information privacy legal regimes was important as it shaped the development of US data breach notification laws and their subsequent implementable scope in other jurisdictions. Second, the sectoral versus comprehensive distinction produced different emphases in relation to data breach notification thus leading to different forms of remedy. The prime example is the distinction between market-based initiatives found in US data breach notification laws compared to rights-based protections found in the EU and Australia. Third, both laws are predicated on the regulation of personal information exchange processes even though both laws regulate this process from different perspectives, namely, a context independent or context dependent approach. Fourth, both laws have limited notions of harm that is further constrained by restrictive accountability frameworks. The findings of the research suggest that data breach notification is more compatible with information privacy law in some respects than others. Apparent compatibilities clearly exist as both laws have an interest in the protection of personal information. However, this thesis revealed that ostensible similarities are founded on some significant differences. Data breach notification law is either a comprehensive facet to a sectoral approach or a sectoral adjunct to a comprehensive regime. However, whilst there are fundamental differences between both laws they are not so great to make them incompatible with each other. The similarities between both laws are sufficient to forge compatibilities but it is likely that the distinctions between them will produce anomalies particularly if both laws are applied from a perspective that negates contextualisation.

Charity law, advocacy and the aid/watch decision : compatibility of charitable purposes and political objects — the view from Australia

Introduction In 1952 the Nathan report stated that: Some of the most valuable activities of voluntary societies consist, however, in the fact that they may be able to stand aside from and criticize State action or inaction, in the interests of the inarticulate man in the street. Some 60 years later it remained the case that if a voluntary society wanted to gain or retain charitable status then, contrary to the Nathan report, the one thing it could not do was set itself up with the purpose of criticizing State action or inaction. This legal position was adopted by the authorities in Australia with the Australian Taxation Office (ATO) noting in Taxation Ruling TR2005/21: 102. An institution or fund is not charitable if its purpose is advocating a political party or cause, attempting to change the law or government policy, or propagating or promoting a particular point of view. So, why, if it is such a valuable activity, have governments steadfastly refused to allow charities to have as their purpose the freedom to advocate in this way and how has this situation been affected by the recent High Court of Australia decision in Aid/Watch v Commissioner of Taxation? This article proposes to address such questions. Beginning with some background history, it explains that, initially, the current constraints did not apply. Then it looks at the nature of these constraints: how does the law define what constitutes the type of political activity that a charity must not undertake? What is the rationale for prohibition? How has the judiciary contributed to the development of the law in this area in recent years? This will lead into a consideration of the Aid/Watch case and the implications arising from the recent final decision. The article concludes by reflecting on what has changed and why the view on this contentious matter now looks different from Australia.