The promotion and assessment of generic skills from interdisciplinary teaching teams

The paper explains a teaching project financed by the University of Barcelona (UB). It focuses on ageneric skill of the University of Barcelona, which is defined as "the learning capability andresponsibility”, and in which analytical and synthesis skills are included. It follows a multidisciplinaryapproach including teachers of Mathematics, World Economics and Economic History. All of us sharethe same students during the first and the second course of the grade in Economics at the Faculty ofEconomics and Business. The project has been developed in three stages. The first one has beendone during the first semester of the course 2012/13, being applied to first year students on thesubjects of Mathematics and Economic History. The second phase is being to be done during thesecond semester only on the Economic History subject. A third stage is going to be done next course2013/14 to second year students on the subject of World Economics. Each different teaching teamhas developed specific materials and assessment tools for each one of the subjects included in theproject. The project emphasizes two teaching dimensions: the elaboration of teaching materials topromote the acquisition of generic skills from an interdisciplinary point of view, and the design ofspecific tools to assess such skills. The first results of the first phase of the project shows cleardeficiencies in the analytical skill regarding to first year students.

Quantitative Ultrasound of the Heel and Fracture Risk Assessment: an Updated Meta-Analysis

Objectives: Quantitative ultrasound (QUS) is an attractive method for assessing fracture risk because it is portable, inexpensive, without ionizing radiation, and available in areas of the world where DXA is not readily accessible or affordable. However, the diversity of QUS scanners and variability of fracture outcomes measured in different studies is an important obstacle to widespread utilisation of QUS for fracture risk assessment. We aimed in this review to assess the predictive power of heel QUS for fractures considering different characteristics of the association (QUS parameters and fracture outcomes measured, QUS devices, study populations, and independence from DXA-measured bone density).Materials/Methods : We conducted an inverse-variance randomeffects meta-analysis of prospective studies with heel QUS measures at baseline and fracture outcomes in their follow-up. Relative risks (RR) per standard deviation (SD) of different QUS parameters (broadband ultrasound attenuation [BUA], speed of sound &SOS;, stiffness index &SI;, and quantitative ultrasound index [QUI]) for various fracture outcomes (hip, vertebral, any clinical, any osteoporotic, and major osteoporotic fractures) were reported based on study questions.Results : 21 studies including 55,164 women and 13,742 men were included with a total follow-up of 279,124 person-years. All four QUS parameters were associated with risk of different fractures. For instance, RR of hip fracture for 1 SD decrease of BUA was 1.69 (95% CI 1.43-2.00), SOS was 1.96 (95% CI 1.64-2.34), SI was 2.26 (95%CI 1.71-2.99), and QUI was 1.99 (95% CI 1.49-2.67). Validated devices from different manufacturers predicted fracture risks with a similar performance (meta-regression p-values>0.05 for difference of devices). There was no sign of publication bias among the studies. QUS measures predicted fracture with a similar performance in men and women. Meta-analysis of studies with QUS measures adjusted for hip DXA showed a significant and independent association with fracture risk (RR/SD for BUA =1.34 [95%CI 1.22-1.49]).Conclusions : This study confirms that QUS of the heel using validated devices predicts risk of different fracture outcomes in elderly men and women. Further research and international collaborations are needed for standardisation of QUS parameters across various manufacturers and inclusion of QUS in fracture risk assessment tools. Disclosure of Interest : None declared.

Writing and science connections : integrated instruction and assessment

Learning to write is a daunting task for many young children. The purpose of this study was to examine the impact of a combined approach to writing instruction and assessment on the writing performance of students in two grade 3 classes. Five forms and traits of writing were purposefully connected during writing lessons while exhibiting links to the four strands of the grade 3 Ontario science curriculum. Students then had opportunities to engage in the writing process and to self-assess their compositions using either student-developed (experimental group/teacher-researcher's class) or teachercreated (control group/teacher-participant's class) rubrics. Paired samples t-tests revealed that both the experimental and control groups exhibited statistically significant growth from pretest to posttest on all five integrated writing units. Independent samples t-tests showed that the experimental group outperformed the control group on the persuasive + sentence fluency and procedure + word choice writing tasks. Pearson product-moment correlation r tests revealed significant correlations between the experimental group and the teacher-researcher on the recount + ideas and report + organization tasks, while students in the control group showed significant correlations with the teacher-researcher on the narrative + voice and procedure + word choice tasks. Significant correlations between the control group and the teacher-participant were evident on the persuasive + sentence fluency and procedure + word choice tasks. Qualitative analyses revealed five themes that highlighted how students' self-assessments and reflections can be used to guide teachers in their instructional decision making. These findings suggest that educators should adopt an integrated writing program in their classrooms, while working with students to create and utilize purposeful writing assessment tools.

Demonstrating the importance of criteria and sub-criteria in building assessment methods

Building assessment methods have become a popular research field since the early 1990s. An international tool which allows the assessment of buildings in all regions, taking into account differences in climates, topographies and cultures does not yet exist. This paper aims to demonstrate the importance of criteria and sub-criteria in developing a new potential building assessment method for Saudi Arabia. Recently, the awareness of sustainability has been increasing in developing countries due to high energy consumption, pollution and high carbon foot print. There is no debate that assessment criteria have an important role to identify the tool’s orientation. However, various aspects influence the criteria and sub-criteria of assessment tools such as environment, economic, social and cultural to mention but a few. The author provides an investigation on the most popular and globally used schemes: BREEAM, LEED, Green Star, CASBEE and Estidama in order to identify the effectiveness of the different aspects of the assessment criteria and the impacts of these criteria on the assessment results; that will provide a solid foundation to develop an effective sustainable assessment method for buildings in Saudi Arabia. Initial results of the investigation suggest that each country needs to develop its own assessment method in order to achieve desired results, while focusing upon the indigenous environmental, economic, social and cultural conditions. Keywords: Assessment methods, BREEAM, LEED, Green Star, CASBEE, Estidama, sustainability, sustainable buildings, Environment, Saudi Arabia.

The importance of accurate wind resource assessment for evaluating the economic viability of small wind turbines

The techno-economic performance of a small wind turbine is very sensitive to the available wind resource. However, due to financial and practical constraints installers rely on low resolution wind speed databases to assess a potential site. This study investigates whether the two site assessment tools currently used in the UK, NOABL or the Energy Saving Trust wind speed estimator, are accurate enough to estimate the techno-economic performance of a small wind turbine. Both the tools tend to overestimate the wind speed, with a mean error of 23% and 18% for the NOABL and Energy Saving Trust tool respectively. A techno-economic assessment of 33 small wind turbines at each site has shown that these errors can have a significant impact on the estimated load factor of an installation. Consequently, site/turbine combinations which are not economically viable can be predicted to be viable. Furthermore, both models tend to underestimate the wind resource at relatively high wind speed sites, this can lead to missed opportunities as economically viable turbine/site combinations are predicted to be non-viable. These results show that a better understanding of the local wind resource is a required to make small wind turbines a viable technology in the UK.

Modelling the bioaccumulation of persistent organic pollutants in agricultural food chains for regulatory exposure assessment

New models for estimating bioaccumulation of persistent organic pollutants in the agricultural food chain were developed using recent improvements to plant uptake and cattle transfer models. One model named AgriSim was based on K OW regressions of bioaccumulation in plants and cattle, while the other was a steady-state mechanistic model, AgriCom. The two developed models and European Union System for the Evaluation of Substances (EUSES), as a benchmark, were applied to four reported food chain (soil/air-grass-cow-milk) scenarios to evaluate the performance of each model simulation against the observed data. The four scenarios considered were as follows: (1) polluted soil and air, (2) polluted soil, (3) highly polluted soil surface and polluted subsurface and (4) polluted soil and air at different mountain elevations. AgriCom reproduced observed milk bioaccumulation well for all four scenarios, as did AgriSim for scenarios 1 and 2, but EUSES only did this for scenario 1. The main causes of the deviation for EUSES and AgriSim were the lack of the soil-air-plant pathway and the ambient air-plant pathway, respectively. Based on the results, it is recommended that soil-air-plant and ambient air-plant pathway should be calculated separately and the K OW regression of transfer factor to milk used in EUSES be avoided. AgriCom satisfied the recommendations that led to the low residual errors between the simulated and the observed bioaccumulation in agricultural food chain for the four scenarios considered. It is therefore recommended that this model should be incorporated into regulatory exposure assessment tools. The model uncertainty of the three models should be noted since the simulated concentration in milk from 5th to 95th percentile of the uncertainty analysis often varied over two orders of magnitude. Using a measured value of soil organic carbon content was effective to reduce this uncertainty by one order of magnitude.

A Virtual Programming Lab for Moodle with automatic assessment and anti-plagiarism features

[EN] This paper describes VPL, a Virtual Programming Lab module for Moodle, developed at the University of Las Palmas of Gran Canaria (ULPGC) and released for free uses under GNU/GPL license. For the students, it is a simple development environment with auto evaluation capabilities. For the instructors, it is a students' work management system, with features to facilitate the preparation of assignments, manage the submissions, check for plagiarism, and do assessments with the aid of powerful and flexible assessment tools based on program testing, all of that being independent of the programming language used for the assignments and taken into account critical security issues.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

From fall-risk assessment to fall detection: inertial sensors in the clinical routine and daily life

Falls are caused by complex interaction between multiple risk factors which may be modified by age, disease and environment. A variety of methods and tools for fall risk assessment have been proposed, but none of which is universally accepted. Existing tools are generally not capable of providing a quantitative predictive assessment of fall risk. The need for objective, cost-effective and clinically applicable methods would enable quantitative assessment of fall risk on a subject-specific basis. Tracking objectively falls risk could provide timely feedback about the effectiveness of administered interventions enabling intervention strategies to be modified or changed if found to be ineffective. Moreover, some of the fundamental factors leading to falls and what actually happens during a fall remain unclear. Objectively documented and measured falls are needed to improve knowledge of fall in order to develop more effective prevention strategies and prolong independent living. In the last decade, several research groups have developed sensor-based automatic or semi-automatic fall risk assessment tools using wearable inertial sensors. This approach may also serve to detect falls. At the moment, i) several fall-risk assessment studies based on inertial sensors, even if promising, lack of a biomechanical model-based approach which could provide accurate and more detailed measurements of interests (e.g., joint moments, forces) and ii) the number of published real-world fall data of older people in a real-world environment is minimal since most authors have used simulations with healthy volunteers as a surrogate for real-world falls. With these limitations in mind, this thesis aims i) to suggest a novel method for the kinematics and dynamics evaluation of functional motor tasks, often used in clinics for the fall-risk evaluation, through a body sensor network and a biomechanical approach and ii) to define the guidelines for a fall detection algorithm based on a real-world fall database availability.

Data Quality Assessment of Ungated Flow Cytometry Data in High

Background: The recent development of semi-automated techniques for staining and analyzing flow cytometry samples has presented new challenges. Quality control and quality assessment are critical when developing new high throughput technologies and their associated information services. Our experience suggests that significant bottlenecks remain in the development of high throughput flow cytometry methods for data analysis and display. Especially, data quality control and quality assessment are crucial steps in processing and analyzing high throughput flow cytometry data. Methods: We propose a variety of graphical exploratory data analytic tools for exploring ungated flow cytometry data. We have implemented a number of specialized functions and methods in the Bioconductor package rflowcyt. We demonstrate the use of these approaches by investigating two independent sets of high throughput flow cytometry data. Results: We found that graphical representations can reveal substantial non-biological differences in samples. Empirical Cumulative Distribution Function and summary scatterplots were especially useful in the rapid identification of problems not identified by manual review. Conclusions: Graphical exploratory data analytic tools are quick and useful means of assessing data quality. We propose that the described visualizations should be used as quality assessment tools and where possible, be used for quality control.

Multicentre validation of the Geneva Risk Score for hospitalised medical patients at risk of venous thromboembolism. Explicit ASsessment of Thromboembolic RIsk and Prophylaxis for Medical PATients in SwitzErland (ESTIMATE).

There is a need to validate risk assessment tools for hospitalised medical patients at risk of venous thromboembolism (VTE). We investigated whether a predefined cut-off of the Geneva Risk Score, as compared to the Padua Prediction Score, accurately distinguishes low-risk from high-risk patients regardless of the use of thromboprophylaxis. In the multicentre, prospective Explicit ASsessment of Thromboembolic RIsk and Prophylaxis for Medical PATients in SwitzErland (ESTIMATE) cohort study, 1,478 hospitalised medical patients were enrolled of whom 637 (43%) did not receive thromboprophylaxis. The primary endpoint was symptomatic VTE or VTE-related death at 90 days. The study is registered at ClinicalTrials.gov, number NCT01277536. According to the Geneva Risk Score, the cumulative rate of the primary endpoint was 3.2% (95% confidence interval [CI] 2.2-4.6%) in 962 high-risk vs 0.6% (95% CI 0.2-1.9%) in 516 low-risk patients (p=0.002); among patients without prophylaxis, this rate was 3.5% vs 0.8% (p=0.029), respectively. In comparison, the Padua Prediction Score yielded a cumulative rate of the primary endpoint of 3.5% (95% CI 2.3-5.3%) in 714 high-risk vs 1.1% (95% CI 0.6-2.3%) in 764 low-risk patients (p=0.002); among patients without prophylaxis, this rate was 3.2% vs 1.5% (p=0.130), respectively. Negative likelihood ratio was 0.28 (95% CI 0.10-0.83) for the Geneva Risk Score and 0.51 (95% CI 0.28-0.93) for the Padua Prediction Score. In conclusion, among hospitalised medical patients, the Geneva Risk Score predicted VTE and VTE-related mortality and compared favourably with the Padua Prediction Score, particularly for its accuracy to identify low-risk patients who do not require thromboprophylaxis.

A methodologic study of pain assessment in Anglo and Hispanic children with cancer

There is growing clinical evidence that even young children experience pain and accompanying anxiety. Few instruments have been validated to assess pain characteristics in children. The study of related demographic, illness, psychologic and parental factors in children has also been limited. This study examines the reliability and validity of pain assessment tools in an outpatient pediatric cancer population. A total of 78 children from three to fifteen years of age were observed and interviewed about the pain of invasive procedures. The effect of cultural factors and the stress of acculturation were examined by comparing data from two cultural groups, Anglo and Hispanic.^ Spielberger State-Trait Anxiety Scales were administered to children and parents prior to an invasive procedure. The Procedure Behavioral Checklist (PBCL) was used for observation of the child's response during the procedure. The Children's Procedural Interview (CPI) which contains items on the PBCL and visual analogues (scales of faces indicating varying degrees of pain and anxiety) was administered following the procedure.^ Reliability coefficients for Anglos were.78 on the PBCL,.79 on the CPI and.85 on the visual analogue scales. For Hispanics, the reliability for the PBCL was.54, while the CPI had a reliability of.72 and the visual analogue scales,.87. Construct validity was demonstrated by high correlations between the PBCL and CPI scores for both ethnic groups (.66 for Anglos and.64 for Hispanics) and by the significant correlation of State anxiety scores with both PBCL and CPI scores. Age was inversely correlated with PBCL and CPI scores for both ethnic groups. Hispanic parents' anxiety scores were higher than Anglo parents, but were not highly correlated with their child's PBCL, CPI or State-Trait anxiety scores. Caregivers' ratings were correlated with the PBCL scores for Anglos but not for Hispanics.^ The findings of this study indicate that pain responses may be reliably assessed using both observational and self-report methods in children, though differences in Anglo and Hispanic cultures exist. Differences in pain symptomatology and assessment in the two cultural groups warrant further study. ^

Computerizing Social-Emotional Assessment for School Readiness: First Steps toward an Assessment Battery for Early Childhood Settings

The transition into formal schooling is a crucial foundation that can set children on a cycle of success or failure in both academic and social domains. A child’s abilities to express healthy emotions, understand emotions of self and others, regulate emotion, attention, and behavior, make good decisions regarding social problems, and engage in a range of prosocial behaviors, all work together to promote a successful school experience. However, many children have deficits in these skills by school entry, and educators lack the requisite tools to identify, track and assess skills these children need to learn. Thus, because social-emotional learning (SEL) is so crucial, assessment tools to pinpoint children’s skills and progress are vitally necessary. Previous work by the authors and other researchers has led to the development of strong assessment tools; however, these tools are often developed solely for research use, not practitioner application. In the following, using our assessment battery as an example, we will discuss the steps necessary to adapt SEL assessment for computer-based administration and optimal utility in early childhood education programs.

Consequences of different meteorological scenarios in the environmental impact assessment of tritium in air

The environmental impact of systems managing large (kg) tritium amount represents a public scrutiny issue for the next coming fusion facilities as ITER and DEMO. Furthermore, potentially new dose limits imposed by international regulations (ICRP) shall impact next coming devices designs and the overall costs of fusion technology deployment. Refined environmental tritium dose impact assessment schemes are then overwhelming. Detailed assessments can be procured from the knowledge of the real boundary conditions of the primary tritium discharge phase into atmosphere (low levels) and into soils. Lagrangian dispersion models using real-time meteorological and topographic data provide a strong refinement. Advance simulation tools are being developed in this sense. The tool integrates a numerical model output records from European Centre for Medium range Weather Forecast (ECMWF) with a lagrangian atmospheric dispersion model (FLEXPART). The composite model ECMWF/FLEXTRA results can be coupled with tritium dose secondary phase pathway assessment tools. Nominal tritium discharge operational reference and selected incidental ITER-like plant systems tritium form source terms have been assumed. The realtime daily data and mesh-refined records together with lagrangian dispersion model approach provide accurate results for doses to population by inhalation or ingestion in the secondary phase

Methodology proposal for the life cycle sustainability assessment applied to retrofitting in a local context

In the European context of upgrading the housing stock energy performance, multiple barriers hinder the wide uptake of sustainable retrofitting practices. Moreover, some of these may imply negative effects often disregarded. Policy makers need to identify how to increase and improve retrofitting practices from the comprehensive point of view of sustainability. None of the existing assessment tools addresses all the issues relevant for sustainable development in a local situation from a life cycle perspective. Life cycle sustainability assessment methodology, or LCSA, analyzes environmental and socioeconomic impacts. The environmental part is quite developed, but the socioeconomic aspect is still challenging. This work proposes socioeconomic criteria to be included in a LCSA to assess retrofitting works in the specific context of Brussels-Capital Region. LCSA feasibility and challenging methodology aspects are discussed.