780 resultados para power and gender
Resumo:
urface treatments have been recently shown to play an active role in electrical characteristics in AlGaN/GaN HEMTs, in particular during the passivation processing [1-4]. However, the responsible mechanisms are partially unknown and further studies are demanding. The effects of power and time N2 plasma pre-treatment prior to SiN deposition using PE-CVD (plasma enhanced chemical vapour deposition) on GaN and AlGaN/GaN HEMT have been investigated. The low power (60 W) plasma pre-treatment was found to improve the electronic characteristics in GaN based HEMT devices, independently of the time duration up to 20 min. In contrast, high power (150 and 210 W) plasma pretreatment showed detrimental effects in the electronic properties (Fig. 1), increasing the sheet resistance of the 2DEG, decreasing the 2DEG charge density in AlGaN/GaN HEMTs, transconductance reduction and decreasing the fT and fmax values up to 40% respect to the case using 60 W N2 plasma power. Although AFM (atomic force microscopy) results showed AlGaN and GaN surface roughness is not strongly affected by the N2-plasma, KFM (Kelvin force microscopy) surface analysis shows significant changes in the surface potential, trending to increase its values as the plasma power is higher. The whole results point at energetic ions inducing polarization-charge changes that affect dramatically to the 2-DEG charge density and the final characteristics of the HEMT devices. Therefore, we conclude that AlGaN surface is strongly sensitive to N2 plasma power conditions, which turn to be a key factor to achieve a good surface preparation prior to SiN passivation.
Resumo:
In this paper, calculus of variations and combined blade element and momentum theory (BEMT) are used to demonstrate that, in hover, when neither root nor tip losses are considered; the rotor, which minimizes the total power (MPR), generates an induced velocity that varies linearly along the blade span. The angle of attack of every blade element is constant and equal to its optimum value. The traditional ideal twist (ITR) and optimum (OR) rotors are revisited in the context of this variational framework. Two more optimum rotors are obtained considering root and tip losses, the ORL, and the MPRL. A comparison between these five rotors is presented and discussed. The MPR and MPRL present a remarkable saving of power for low values of both thrust coefficient and maximum aerodynamic efficiency. The result obtained can be exploited to improve the aerodynamic behaviour of rotary wing micro air vehicles (MAV). A comparison with experimental results obtained from the literature is presented.
Resumo:
To date, the majority of quality controls performed at PV plants are based on the measurement of a small sample of individual modules. Consequently, there is very little representative data on the real Standard Test Conditions (STC) power output values for PV generators. This paper presents the power output values for more than 1300 PV generators having a total installed power capacity of almost 15.3 MW. The values were obtained by the INGEPER-UPNA group, in collaboration with the IES-UPM, through a study to monitor the power output of a number of PV plants from 2006 to 2009. This work has made it possible to determine, amongst other things, the power dispersion that can be expected amongst generators made by different manufacturers, amongst generators made by the same manufacturer but comprising modules of different nameplate ratings and also amongst generators formed by modules with the same characteristics. The work also analyses the STC power output evolution over time in the course of this 4-year study. The values presented here could be considered to be representative of generators with fault-free modules.
Resumo:
An advantage of laser crystallization over conventional heating methods is its ability to limit rapid heating and cooling to thin surface layers. Laser energy is used to heat the a-Si thin film to change the microstructure to poly-Si. Thin film samples of a-Si were irradiated with a CW-green laser source. Laser irradiated spots were produced by using different laser powers and irradiation times. These parameters are identified as key variables in the crystallization process. The power threshold for crystallization is reduced as the irradiation time is increased. When this threshold is reached the crystalline fraction increases lineally with power for each irradiation time. The experimental results are analysed with the aid of a numerical thermal model and the presence of two crystallization mechanisms are observed: one due to melting and the other due to solid phase transformation.
Resumo:
Previous research has indicated the need to use large samples in different cultural contexts in order to clarify age and gender differences on morningness-eveningness and sleep habits. The goal of our research was to study the relationship between morningness-eveningness and sleep habits in a large sample of 2,649 adolescents between 12 and 16 years. The Morningness- Eveningness Scale for Children and an adaptation of the School Sleep Habits Survey measures were used. Results indicated a greater tendency toward eveningness with age and higher eveningness in 13- and 14-year-old girls. Older adolescents claimed later rising time on weekends, later bedtime and shorter sleep length, and greater social jetlag, weekend rise time delay, and weekend bedtime delay. Girls reported earlier rising time on weekdays, later rising time on weekends, longer sleep length on weekends, and greater social jetlag and weekend rising time delay. Lastly, evening oriented adolescents claimed later rising time and bedtime, shorter sleep length on weekdays but longer sleep duration on weekends, and greater social jetlag, weekend rising time delay, and weekend bedtime delay.
Resumo:
The representation of women in crime fiction has traditionally been a complicated one. Consistently forced into secondary characters (assistants, girlfriends, or damsels in distress) the most active role a female character could aspire to was that of the femme fatale, a pit of perdition, an unwelcome distraction for a man looking for truth and justice. This traditional approach to the genre has been challenged in the last decades by women acting as detectives, trusted with solving their cases in a hostile male world. Similarly, the traditional white male protagonist has been contested by fictions where ethnic minorities are not just consigned to the criminal world, but where detectives are members of ethnic groups, and can use their knowledge of the community to solve the case. This essay focuses on the crossroads of ethnic and women’s detective fiction, specifically the Gloria Damasco series by Chicana writer Lucha Corpi and the graphic novel Chicanos (Trillo and Risso, 1996). Both protagonists (Gloria Damasco, a Chicana clairvoyant detective, and “poor, ugly, and a detective” Alejandrina Yolanda Jalisco) must face both the dangers of investigating criminal cases and discrimination in their professional surroundings due to their gender and ethnicity. By contrasting these texts, the essay elucidates the importance of specific cultural products, their connection to (and defiance of) canonical forms of the genre, and their rejection of generic and gender expectations.
Resumo:
Objective: To review the scientific literature on pharmaceutical advertising aimed at health professionals in order to determine whether gender bias has decreased and the quality of information in pharmaceutical advertising has improved over time. Methods: We performed a content analysis of original articles dealing with medical drug promotion (1998-2008), according to quality criteria such as (a) the number, validity and accessibility of bibliographic references provided in pharmaceutical advertising and (b) the extent to which gender representations were consistent with the prevalence of the diseases. Databases: PUBMED, Medline, Scopus, Sociological Abstract, Eric and LILACS. Results: We reviewed 31 articles that analyzed advertising in medical journals from 1975-2005 and were published between 1998 and 2008. We found that the number of references used to support pharmaceutical advertising claims increased from 1975 but that 50% of these references were not valid. There was a tendency to depict men in paid productive roles, while women appeared inside the home or in non-occupational social contexts. Advertisements for psychotropic and cardiovascular drugs overrepresented women and men respectively. Conclusions: The use of bibliographic references increased between 1998 and 2008. However, representation of traditional male-female roles was similar in 1975 and 2005. Pharmaceutical advertisements may contribute to reinforcing the perception that certain diseases are associated with the most frequently portrayed sex.
Resumo:
The documentary is available in Portuguese at the following link: http://hdl.handle.net/10045/17580
Resumo:
Background: Gender inequalities in the exposure to work-related psychosocial hazards are well established. However, little is known about how welfare state regimes influence these inequalities. Objectives: To examine the relationship between welfare state regimes and gender inequalities in the exposure to work-related psychosocial hazards in Europe, considering occupational social class. Methods: We used a sample of 27, 465 workers from 28 European countries. Dependent variables were high strain, iso-strain, and effort-reward imbalance, and the independent was gender. We calculated the prevalence and prevalence ratio separately for each welfare state regime and occupational social class, using multivariate logistic regression models. Results: More female than male managers/professionals were exposed to: high strain, iso-strain, and effort–reward imbalance in Scandinavian [adjusted prevalence ratio (aPR) = 2·26; 95% confidence interval (95% CI): 1·87–2·75; 2·12: 1·72–2·61; 1·41: 1·15–1·74; respectively] and Continental regimes (1·43: 1·23–1·54; 1·51: 1·23–1·84; 1·40: 1·17–1·67); and to high strain and iso-strain in Anglo-Saxon (1·92: 1·40–2·63; 1·85: 1·30–2·64; respectively), Southern (1·43: 1·14–1·79; 1·60: 1·18–2·18), and Eastern regimes (1·56: 1·35–1·81; 1·53: 1·28–1·83). Conclusion: Gender inequalities in the exposure to work-related psychosocial hazards were not lower in those welfare state regimes with higher levels of universal social protection policies.
Resumo:
AIM: To evaluate the prediction error in intraocular lens (IOL) power calculation for a rotationally asymmetric refractive multifocal IOL and the impact on this error of the optimization of the keratometric estimation of the corneal power and the prediction of the effective lens position (ELP). METHODS: Retrospective study including a total of 25 eyes of 13 patients (age, 50 to 83y) with previous cataract surgery with implantation of the Lentis Mplus LS-312 IOL (Oculentis GmbH, Germany). In all cases, an adjusted IOL power (PIOLadj) was calculated based on Gaussian optics using a variable keratometric index value (nkadj) for the estimation of the corneal power (Pkadj) and on a new value for ELP (ELPadj) obtained by multiple regression analysis. This PIOLadj was compared with the IOL power implanted (PIOLReal) and the value proposed by three conventional formulas (Haigis, Hoffer Q and Holladay). RESULTS: PIOLReal was not significantly different than PIOLadj and Holladay IOL power (P>0.05). In the Bland and Altman analysis, PIOLadj showed lower mean difference (-0.07 D) and limits of agreement (of 1.47 and -1.61 D) when compared to PIOLReal than the IOL power value obtained with the Holladay formula. Furthermore, ELPadj was significantly lower than ELP calculated with other conventional formulas (P<0.01) and was found to be dependent on axial length, anterior chamber depth and Pkadj. CONCLUSION: Refractive outcomes after cataract surgery with implantation of the multifocal IOL Lentis Mplus LS-312 can be optimized by minimizing the keratometric error and by estimating ELP using a mathematical expression dependent on anatomical factors.
Resumo:
Purpose: To evaluate the predictability of the refractive correction achieved with a positional accommodating intraocular lenses (IOL) and to develop a potential optimization of it by minimizing the error associated with the keratometric estimation of the corneal power and by developing a predictive formula for the effective lens position (ELP). Materials and Methods: Clinical data from 25 eyes of 14 patients (age range, 52–77 years) and undergoing cataract surgery with implantation of the accommodating IOL Crystalens HD (Bausch and Lomb) were retrospectively reviewed. In all cases, the calculation of an adjusted IOL power (PIOLadj) based on Gaussian optics considering the residual refractive error was done using a variable keratometric index value (nkadj) for corneal power estimation with and without using an estimation algorithm for ELP obtained by multiple regression analysis (ELPadj). PIOLadj was compared to the real IOL power implanted (PIOLReal, calculated with the SRK-T formula) and also to the values estimated by the Haigis, HofferQ, and Holladay I formulas. Results: No statistically significant differences were found between PIOLReal and PIOLadj when ELPadj was used (P = 0.10), with a range of agreement between calculations of 1.23 D. In contrast, PIOLReal was significantly higher when compared to PIOLadj without using ELPadj and also compared to the values estimated by the other formulas. Conclusions: Predictable refractive outcomes can be obtained with the accommodating IOL Crystalens HD using a variable keratometric index for corneal power estimation and by estimating ELP with an algorithm dependent on anatomical factors and age.