Helping undergraduate students across disciplines and cultures actively engage and collaborate as equal members of a community of scholars : peer review within an e-learning environment

At the international level, the higher education sector is currently being subjected to increased calls for public accountability and the current move by the OECD to rank universities based on the quality of their teaching and learning outcomes. At the national level, Australian universities and their teaching staff face numerous challenges including financial restrictions, increasing student numbers and the reality of an increasingly diverse student population. The Australian higher education response to these competing policy and accreditation demands focuses on precise explicit systems and procedures which are inflexible and conservative and which ignore the fact that assessment is the single biggest influence on how students approach their learning. By seriously neglecting the quality of student learning outcomes, assessment tasks are often failing to engage students or reflect the tasks students will face in the world of practice. Innovative assessment design, which includes new paradigms of student engagement and learning and pedagogically based technologies have the capacity to provide some measure of relief from these internal and external tensions by significantly enhancing the learning experience for an increasingly time-poor population of students. That is, the assessment process has the ability to deliver program objectives and active learning through a knowledge transfer process which increases student participation and engagement. This social constructivist view highlights the importance of peer review in assisting students to participate and collaborate as equal members of a community of scholars with both their peers and academic staff members. As a result of increasing the student’s desire to learn, peer review leads to more confident, independent and reflective learners who also become more skilled at making independent judgements of their own and others' work. Within this context, in Case Study One of this project, a summative, peer-assessed, weekly, assessment task was introduced in the first “serious” accounting subject offered as part of an undergraduate degree. The positive outcomes achieved included: student failure rates declined 15%; tutorial participation increased fourfold; tutorial engagement increased six-fold; and there was a 100% student-based approval rating for the retention of the assessment task. However, in stark contrast to the positive student response, staff issues related to the loss of research time associated with the administration of the peer-review process threatened its survival. This paper contributes to the core conference topics of new trends and experiences in undergraduate assessment education and in terms of innovative, on-line, learning and teaching practices, by elaborating the Case Study Two “solution” generated to this dilemma. At the heart of the resolution is an e-Learning, peer-review process conducted in conjunction with the University of Melbourne which seeks to both create a virtual sense of belonging and to efficiently and effectively meet academic learning objectives with minimum staff involvement. In outlining the significant level of success achieved, student-based qualitative and quantitative data will be highlighted along with staff views in a comparative analysis of the advantages and disadvantages to both students and staff of the staff-led, peer review process versus its on-line counterpart.

Learning English in an English speaking world : examining opportunities for intercultural understandings and connectedness through representations of identities in English language textbooks

With the recognition that language both reflects and constructs culture and English now widely acknowledged as an international language, the cul-tural content of language teaching materials is now being problematised. Through a quantitative analysis, this chapter focuses on opportunities for intercultural understanding and connectedness through representations of the identities that appear in two leading English language textbooks. The analyses reveal that the textbooks orientate towards British and western identities with representations of people from non-European/non-Western backgrounds being notable for their absence, while others are hidden from view. Indeed there would appear to be a neocolonialist orientation in oper-ation in the textbooks, one that aligns English with the West. The chapter proposes arguments for the consideration of cultural diversity in English language teaching (ELT) textbook design, and promoting intercultural awareness and acknowledging the contexts in which English is now being used. It also offers ways that teachers can critically reflect on existing ELT materials and proposes arguments for including different varieties of Eng-lish in order to ensure a level of intercultural understanding and connect-edness.

Work-integrated learning as a component of the capstone experience in undergraduate law

There is currently little guidance in the Australian literature in relation to how to design an effective capstone experience. As a result, universities often fail to provide students with a genuine culminating experience in the final year of their degree. This paper will consider the key objectives of capstone experiences – closure and transition – and will examine how these objectives can be met by a work-integrated learning (WIL) experience. This paper presents an argument for the inclusion of WIL as a component of a capstone experience. WIL is consistent with capstone objectives in focusing on the transition to professional practice. However, the capacity of WIL to meet all of the objectives of capstones may be limited. The paper posits that while WIL should be considered as a potential component of a capstone experience, educators should ensure that WIL is not equated with a capstone experience unless it is carefully designed to ensure that all the objectives of capstones are met.

Learning Landscapes 2.0: Adaptable educational environments

This project has blended two streams of enquiry: temporary and transportable construction technology, and flexible blended-learning environments. It seeks to develop prototypes for a series of environments suited for the activities of learning (future-proofed schools), as practiced in the twenty first century. The research utilises techniques of: historic survey, case study, first-hand observation, and architectural design (as research). The design comprises three major components: The determinate landscape: in-situ concrete ‘plate’ that is permanent. The indeterminate landscape: a kit of pre-fabricated 2-D panels assembled in a unique manner at each site to suit the client and context; manufactured to the principles of design-for-disassembly. The stations: pre-fabricated packages of highly-serviced space connected through the determinate landscape. This project was submitted to the ‘Future Proofing Schools’ competition (professional category) in October 2011. The competition was part of a research project supported under the Australian Research Council’s Linkage Grant funding scheme (project LP0991146).

Educating for change : a case for a pedagogy of desire in design eduation

Despite major inroads in demystifying creativity for the non-design disciplines, there has been very little movement in the design disciplines themselves beyond traditional paradigms. As argued in this paper, this is particularly noticeable in design education where traditional pedagogical approaches persist despite the emergence of new experimental pedagogies and the possibilities and opportunities they offer. In response, this paper describes what is revealed when a ‘pedagogy of desire’ is used as a critical lens to reflect on an experience of developing and implementing a first year interior design program involving first and second year undergraduate interior design and architecture students. Implications drawn from the review are presented and a case made for continuing experimentation and development of a pedagogy of desire for design learning and teaching.

One more tier, no more tears: Students’ perceptions of QUT Library’s 2nd tier learning and study support

This nuts and bolts session discusses QUT Library’s Study Solutions service which is staffed by academic skills advisors and librarians as the 2nd tier of its learning and study support model. Firstly, it will discuss the rationale behind the Study Solutions model and provide a brief profile of the service. Secondly, it will outline what distinguishes it from other modes of one-to-one learning support. Thirdly, it will report findings from a student perception study conducted to determine what difference this model of individual study assistance made to academic confidence, ability to transfer academic skills and capacity to assist peers. Finally, this session will include small group discussions to consider the feasibility of this model as best practice for other tertiary institutions and student perception as a valuable measure of the impact of learning support services.

Getting stuck in together : improving work integrated learning from an Australian institution and faculty perspective

According to a recent report Australian higher education is not in crisis. However, we could be doing it better. The report Mapping Australian Higher Education (Norton, 2012) highlights comparative weaknesses such as levels f student engagement; interactions between students and academic staff; and academic staff preferences for research over teaching. The report points out that despite these concerns most graduates continue to get good, well-paid jobs, student satisfaction is improving, and levels of public confidence in Australian higher education are high. It also stresses that ‘the promise of higher education is that it provides adaptable cognitive skills, not that it always provides the job specific skills graduates will need in their future employment’ (Norton, 2012, p.58). This is worth keeping in mind as we contribute to the significant growth in curriculum initiatives aimed at preparing graduates for the world of work. Work Integrated Learning (WIL) is not a new concept but there is increased pressure on higher education globally to address graduate employability skills. The sector is under pressure in an increasingly competitive environment to demonstrate the relevance of courses, accountability and effective use of public funds (Peach & Gamble, 2011). In the Australian context this also means responding to the skills shortage in areas such as engineering, health, construction and business (DEEWR, 2010). This paper provides a brief overview of collaborative efforts over several years to improve the activity of WIL at the Queensland University of Technology (QUT). These efforts have resulted in changes to curriculum, pedagogy, systems and processes, and the initiation of local, regional, national, and international networks. The willingness of students, staff, and industry partners to ‘get stuck in’ and try new approaches in these different contexts can be understood as a form of boundary spanning. That is, the development of the capability to mediate between different forms of expertise and the demands of different contexts in order to nurture student learning and improve the outcomes of higher education through WIL (Peach, Cates, Ilg, Jones, Lechleiter, 2011).

A transition pedagogy for student engagement and first-year learning, success and retention

This chapter argues that higher education institutions (HEIs) must direct coordinated, whole-of-institution attention to changing, both culturally and structurally, the fundamental and prevailing character of the first-year experience (FYE). It leverages evidence from the sector(Nelson, Kift and Clarke, 2011), from research-led practice in our institution (for example, Kift, Nelson and Clarke, 2010; Nelson et al.,in press) and from research conducted under an Australian Learning and Teaching Council Senior Fellowship (Kift, 2009a, 2009b, 2009c) to assert that student engagement and success should not be left to chance, particularly those aspects such as curriculum design and enactment that are within our institutional control.

Interface design in interactive science courseware for the Malaysian Smart School Project

With the goal of improving the academic performance of primary and secondary students in Malaysia by 2020, the Malaysian Ministry of Education has made a significant investment in developing a Smart School Project. The aim of this project is to introduce interactive courseware into primary and secondary schools across Malaysia. As has been the case around the world, interactive courseware is regarded as a tool to motivate students to learn meaningfully and enhance learning experiences. Through an initial pilot phase, the Malaysian government has commissioned the development of interactive courseware by a number of developers and has rolled this courseware out to selected schools over the past 12 years. However, Ministry reports and several independent researchers have concluded that its uptake has been limited, and that much of the courseware has not been used effectively in schools. This has been attributed to weaknesses in the interface design of the courseware, which, it has been argued, fails to accommodate the needs of students and teachers. Taking the Smart School Project's science courseware as a sample, this research project has investigated the extent, nature, and reasons for the problems that have arisen. In particular, it has focused on examining the quality and effectivity of the interface design in facilitating interaction and supporting learning experiences. The analysis has been conducted empirically, by first comparing the interface design principles, characteristics and components of the existing courseware against best practice, as described in the international literature, as well as against the government guidelines provided to the developers. An ethnographic study was then undertaken to observe how the courseware is used and received in the classroom, and to investigate the stakeholders' (school principal, teachers and students') perceptions of its usability and effectivity. Finally, to understand how issues may have arisen, a review of the development process has been undertaken and it has been compared to development methods recommended in the literature, as well as the guidelines provided to the developers. The outcomes of the project include an empirical evaluation of the quality of the interface design of the Smart School Project's science courseware; the identification of other issues that have affected its uptake; an evaluation of the development process and, out of this, an extended set of principles to guide the design and development of future Smart School Project courseware to ensure that it accommodates the various stakeholders' needs.

Approaches to learning information literacy : a phenomenographic study

This paper reports on an empirical study that explores the ways students approach learning to find and use information. Based on interviews with 15 education students in an Australian university, this study uses phenomenography as its methodological and theoretical basis. The study reveals that students use three main strategies for learning information literacy: 1) learning by doing; 2) learning by trial and error; and 3) learning by interacting with other people. Understanding the different ways that students approach learning information literacy will assist librarians and faculty to design and provide more effective information literacy education.

E-learning : aging workforce versus technology-savvy generation

Purpose – The purpose of this paper is to provide description and analysis of how a traditional industry is currently using e-learning, and to identify how the potential of e-learning can be realised whilst acknowledging the technological divide between younger and older workers. Design/methodology/approach – An exploratory qualitative methodology was employed to analyse three key questions: How is the Australian rail industry currently using e-learning? Are there age-related issues with the current use of e-learning in the rail industry? How could e-learning be used in future to engage different generations of learners in the rail industry? Data were collected in five case organisations from across the Australian rail industry. Findings – Of the rail organisations interviewed, none believed they were using e-learning to its full potential. The younger, more technologically literate employees are not having their expectations met and therefore retention of younger workers has become an issue. The challenge for learning and development practitioners is balancing the preferences of an aging workforce with these younger, more “technology-savvy”, learners and the findings highlight some potential ways to begin addressing this balance. Practical implications – The findings identified the potential for organisations (even those in a traditional industry such as rail) to better utilise e-learning to attract and retain younger workers but also warns against making assumptions about technological competency based on age. Originality/value – Data were gathered across an industry, and thus this paper takes an industry approach to considering the potential age-related issues with e-learning and the ways it may be used to meet the needs of different generations in the workplace.

Digital Storytelling within a Service-Learning Partnership: Technology as Product and Process for University Students and Culturally and Linguistically Diverse High School Youth

This chapter describes a university/high school partnership focused on digital storytelling. It also explains the multi-stage process used to establish this successful partnership and project. The authors discuss the central role that technology played in developing this university/high school partnership, a collaboration that extended the impact of a digital storytelling project to reach high school students, university students, educators, high school administrators, and the local community. Valuing a reflective process that can lead to the creation of a powerful final product, the authors describe the impact of digital storytelling on multiple stakeholders, including the 13 university students and 33 culturally and linguistically diverse high school youth who participated during the fall of 2009. In addition, the chapter includes reflections from university and high school student participants expressed during focus groups conducted throughout the project. While most participants had a positive experience with the project, complications with the technology component often caused frustrations and additional challenges. Goals for sharing this project are to critically evaluate digital storytelling, describe lessons learned, and recommend good practices for others working within a similar context or with parallel goals.

Australian Learning and Teaching Council, Learning and Teaching Academic Standards Statement for Architecture

The development of the Learning and Teaching Academic Standards Statement for Architecture (the Statement) centred on requirements for the Master of Architecture and proceeded alongside similar developments in the building and construction discipline under the guidance and support of the Australian Deans of Built Environment and Design (ADBED). Through their representation of Australian architecture programs, ADBED have provided high-level leadership for the Learning and Teaching Academic Standards Project in Architecture (LTAS Architecture). The threshold learning outcomes (TLOs), the description of the nature and extent of the discipline, and accompanying notes were developed through wide consultation with the discipline and profession nationally. They have been considered and debated by ADBED on a number of occasions and have, in their fi nal form, been strongly endorsed by the Deans. ADBED formed the core of the Architecture Reference Group (chaired by an ADBED member) that drew together representatives of every peak organisation for the profession and discipline in Australia. The views of the architectural education community and profession have been provided both through individual submissions and the voices of a number of peak bodies. Over two hundred individuals from the practising profession, the academic workforce and the student cohort have worked together to build consensus about the capabilities expected of a graduate of an Australian Master of Architecture degree. It was critical from the outset that the Statement should embrace the wisdom of the greater ‘tribe’, should ensure that graduates of the Australian Master of Architecture were eligible for professional registration and, at the same time, should allow for scope and diversity in the shape of Australian architectural education. A consultation strategy adopted by the Discipline Scholar involved meetings and workshops in Perth, Melbourne, Sydney, Canberra and Brisbane. Stakeholders from all jurisdictions and most universities participated in the early phases of consultation through a series of workshops that concluded late in October 2010. The Draft Architecture Standards Statement was formed from these early meetings and consultation in respect of that document continued through early 2011. This publication represents the outcomes of work to establish an agreed standards statement for the Master of Architecture. Significant further work remains to ensure the alignment of professional accreditation and recognition procedures with emerging regulatory frameworks cascading from the establishment of the Tertiary Education Quality and Standards Agency (TEQSA). The Australian architecture community hopes that mechanisms can be found to integrate TEQSA’s quality assurance purpose with well-established and understood systems of professional accreditation to ensure the good standing of Australian architectural education into the future. The work to build renewed and integrated quality assurance processes and to foster the interests of this project will continue, for at least the next eighteen months, under the auspices of Australian Learning and Teaching Council (ALTC)-funded Architecture Discipline Network (ADN), led by ADBED and Queensland University of Technology. The Discipline Scholar gratefully acknowledges the generous contributions given by those in stakeholder communities to the formulation of the Statement. Professional and academic colleagues have travelled and gathered to shape the Standards Statement. Debate has been vigorous and spirited and the Statement is rich with the purpose, critical thinking and good judgement of the Australian architectural education community. The commitments made to the processes that have produced this Statement reflect a deep and abiding interest by the constituency in architectural education. This commitment bodes well for the vibrancy and productivity of the emergent Architecture Discipline Network (ADN). Endorsement, in writing, was received from the Australian Institute of Architects National Education Committee (AIA NEC): The National Education Committee (NEC) of the Australian Institute of Architects thank you for your work thus far in developing the Learning and Teaching Academic Standards for Architecture In particular, we acknowledge your close consultation with the NEC on the project along with a comprehensive cross-section of the professional and academic communities in architecture. The TLOs with the nuanced levels of capacities – to identify, develop, explain, demonstrate etc – are described at an appropriate level to be understood as minimum expectations for a Master of Architecture graduate. The Architects Accreditation Council of Australia (AACA) has noted: There is a clear correlation between the current processes for accreditation and what may be the procedures in the future following the current review. The requirement of the outcomes as outlined in the draft paper to demonstrate capability is an appropriate way of expressing the measure of whether the learning outcomes have been achieved. The measure of capability as described in the outcome statements is enhanced with explanatory descriptions in the accompanying notes.

Perceptions of physical versus virtual design studio education

While the studio environment has been promoted as an ideal educational setting for project-based disciplines associated with the art and design, few qualitative studies have been undertaken in a comprehensive way, with even fewer giving emphasis to the teachers and students and how they feel about changing their environment. This situation is problematic given the changes and challenges facing higher education, including those associated with new technologies such as online learning. In response, this paper describes a comparative study employing grounded theory to identify and describe teachers’ and students’ perceptions of the physical design studio (PDS) as well as the virtual design studio (VDS) of architectural students in an Australian university. The findings give significance to aspects of design education activities and their role in the development of integrated hybrid learning environments.