Histone H1 expression varies during the Leishmania major life cycle.

The deduced amino acid sequence of Leishmania major sw3 cDNA reveals the presence of characteristic histone H1 amino acid motifs. However, the open reading frame is of an unusually small size for histone H1 (105 amino acids) because it lacks the coding potential for the central hydrophobic globular domain of linker histones present in other eukaryotes. Here, we provide biochemical evidence that the SW3 protein is indeed a L. major nuclear histone H1, and that it is differentially expressed during the life cycle of the parasite. Due to its high lysine content, the SW3 protein can be purified to a high degree from L. major nuclear lysates with 5% perchloric acid, a histone H1 preparative method. Using an anti-SW3 antibody, this protein is detected as a 17 kDa or as a 17/19 kDa doublet in the nuclear subfraction in different L. major strains. The nuclear localization of the SW3 protein is further supported by immunofluorescence studies. During in vitro promastigote growth, both the sw3 cytoplasmic mRNA and its protein progressively accumulate within parasites from early log phase to stationary phase. Within amastigotes, the high level of H1 expression is maintained but decreases when amastigotes differentiate into promastigotes. Together, these observations suggest that the different levels of this histone H1 protein could influence the varying degrees of chromatin condensation during the life-cycle of the parasite, and provide us with tools to study this mechanism.

ESTÁDIOS DE DESENVOLVIMENTO DE EMBRIÕES NA OBTENÇÃO DE PLANTAS EM CRUZAMENTOS ENTRE GENITORES APIRENOS DE VIDEIRA

Pesquisou-se o efeito do estádio de desenvolvimento de embriões resgatados na obtenção de plantas em cruzamentos entre genitores apirenos de videira, utilizando dois métodos de cultivo in vitro de sementes-traço. No método 1 (M1), as sementes-traço foram cultivadas 60 dias em meio-de-cultura ER e no método 2 (M2) 60 dias em ER, mais 30 dias em meio-de-cultura MS. O estádio de desenvolvimento do embrião foi identificado no final destes períodos, quando do resgate e transferência para meio-de-cultura WP. Quatro tipos de embriões foram identificados: globular, cordiforme, torpedo e indefinido. O estádio globular foi encontrado com maior freqüência, levando à obtenção de maior número de plantas, mesmo tendo apresentado menor capacidade de gerar plantas. A maior eficiência em gerar plantas foi obtida com o estádio torpedo. No M2, ocorreu maior número de embriões germinados e de plantas desenvolvidas. Como o estádio de desenvolvimento do embrião influencia na obtenção de plantas, o resgate de embriões em estádio mais avançado do seu desenvolvimento leva a tem maior capacidade de gerar plantas. Portanto, uso de técnicas que favoreçam o resgate de embriões mais desenvolvidos pode aumentar o número de plantas obtidas.

LWC-linjan pituushylyn hallinta

Työn tavoitteena oli saavuttaa päällystysasemilla sama tuotantotehokkuus kuin vuonna 1999, jolloin ne hankittiin. Tällöin myös määritettiin takuuarvot aseman toiminnallisista ominaisuuksista. Työtä aloitettaessa profiilien ja päällystemäärien asettuminen kesti kuitenkin huomattavasti kauemmin kuin takuuarvoissa oli määritelty. Keinoina jolla takuuarvoihin voitaisiin taas päästä, kuuluivat pastan konekiertojen kunnon tarkastus, päällystysasemien mekaanisten vikojen korjaaminen, laatusäätöjärjestelmän uudelleen virittäminen ja parhaiden työtapojen yhtenäistäminen eri vuorojen keskuudessa. Toisena tavoitteena oli luoda pituushylyn mittaus- ja raportointijärjestelmä koko tuotantolinjalle. Paperikoneelle rakennettiin automaattinen järjestelmä jolla pystyttiin seuraamaan asemien katkon jälkeistä toimintaa ja laatu virheistä syntyvää pituushylyn määrää. Jälkikäsittelyn raportointiin tehtiin sovellus johon käyttäjät pystyivät syöttämään hylättyjä paperi metrejä ja syitä niihin.

The diagnostic challenge of progressive pseudorheumatoid dysplasia (PPRD): A review of clinical features, radiographic features, and WISP3 mutations in 63 affected individuals.

Progressive pseudorheumatoid dysplasia (PPRD) is a genetic, non-inflammatory arthropathy caused by recessive loss of function mutations in WISP3 (Wnt1-inducible signaling pathway protein 3; MIM 603400), encoding for a signaling protein. The disease is clinically silent at birth and in infancy. It manifests between the age of 3 and 6 years with joint pain and progressive joint stiffness. Affected children are referred to pediatric rheumatologists and orthopedic surgeons; however, signs of inflammation are absent and anti-inflammatory treatment is of little help. Bony enlargement at the interphalangeal joints progresses leading to camptodactyly. Spine involvement develops in late childhood and adolescence leading to short trunk with thoracolumbar kyphosis. Adult height is usually below the 3rd percentile. Radiographic signs are relatively mild. Platyspondyly develops in late childhood and can be the first clue to the diagnosis. Enlargement of the phalangeal metaphyses develops subtly and is usually recognizable by 10 years. The femoral heads are large and the acetabulum forms a distinct "lip" overriding the femoral head. There is a progressive narrowing of all articular spaces as articular cartilage is lost. Medical management of PPRD remains symptomatic and relies on pain medication. Hip joint replacement surgery in early adulthood is effective in reducing pain and maintaining mobility and can be recommended. Subsequent knee joint replacement is a further option. Mutation analysis of WISP3 allowed the confirmation of the diagnosis in 63 out of 64 typical cases in our series. Intronic mutations in WISP3 leading to splicing aberrations can be detected only in cDNA from fibroblasts and therefore a skin biopsy is indicated when genomic analysis fails to reveal mutations in individuals with otherwise typical signs and symptoms. In spite of the first symptoms appearing in early childhood, the diagnosis of PPRD is most often made only in the second decade and affected children often receive unnecessary anti-inflammatory and immunosuppressive treatments. Increasing awareness of PPRD appears to be essential to allow for a timely diagnosis. © 2012 Wiley Periodicals, Inc.

Critical flux and fouling in ultrafiltration of proteins

In this thesis different parameters influencing critical flux in protein ultrafiltration and membrane foul-ing were studied. Short reviews of proteins, cross-flow ultrafiltration, flux decline and criticalflux and the basic theory of Partial Least Square analysis (PLS) are given at the beginning. The experiments were mainly performed using dilute solutions of globular proteins, commercial polymeric membranes and laboratory scale apparatuses. Fouling was studied by flux, streaming potential and FTIR-ATR measurements. Critical flux was evaluated by different kinds of stepwise procedures and by both con-stant pressure and constant flux methods. The critical flux was affected by transmembrane pressure, flow velocity, protein concentration, mem-brane hydrophobicity and protein and membrane charges. Generally, the lowest critical fluxes were obtained at the isoelectric points of the protein and the highest in the presence of electrostatic repulsion between the membrane surface and the protein molecules. In the laminar flow regime the critical flux increased with flow velocity, but not any more above this region. An increase in concentration de-creased the critical flux. Hydrophobic membranes showed fouling in all charge conditionsand, furthermore, especially at the beginning of the experiment even at very low transmembrane pressures. Fouling of these membranes was thought to be due to protein adsorption by hydrophobic interactions. The hydrophilic membranes used suffered more from reversible fouling and concentration polarisation than from irreversible foul-ing. They became fouled at higher transmembrane pressures becauseof pore blocking. In this thesis some new aspects on critical flux are presented that are important for ultrafiltration and fractionation of proteins.

Embriogênese somática do caquizeiro

O objetivo deste trabalho foi o estabelecimento de um protocolo para a embriogênese somática do caquizeiro. Como explantes, foram utilizados embriões zigóticos em diversos estádios de desenvolvimento, retirados de frutos coletados de plantas adultas a campo, a partir de quatro semanas após o pleno florescimento até 22 semanas. O meio básico para os experimentos foi o MS½NO3. O meio inicial de indução foi suplementado com 20µM de 2,4-D e 2µM de cinetina. Os calos escuros obtidos foram repicados para outro meio de indução, com concentrações 10 ou 20 µM de 2,4-D e 2 µM de cinetina. Os calos com massas pró-embriogênicas obtidos foram transferidos para meio de manutenção e multiplicação com 2 µM de cinetina e 2,4-D nas concentrações 2,5; 5,0 e 10 µM. As massas embriogênicas formadas foram transferidas para meio de maturação suplementado com 0,5 µM de AIB e as concentrações 5; 10 e 20 µM de 2-iP. Os embriões formados foram isolados em dois meios de conversão, sendo o primeiro com 5 µM de 2-iP, 5 µM de AG3 e 0,5 µM de AIB e o segundo com 0,5 µM de AG3 e BAP, nas concentrações 0; 0,25; 0,5 e 1,0 µM. Como resultados, obteve-se o padrão indireto de embriogênese somática a partir de embriões zigóticos maduros, com mais de 22 semanas de formação, quando cultivados em meio de cultura com 10 µM de 2,4-D combinado com 2 µM de cinetina. A manutenção e a multiplicação das culturas embriogênicas foram mais eficientes com 5 µM de 2,4-D, na qual os pró-embriões avançaram para o estádio globular. Na fase de maturação, as concentrações de 2-iP testadas atuaram promovendo os embriões globulares a estádios mais avançados da ontogenia como cordiforme, torpedo e cotiledonar. A suplementação do meio de cultura com 1 µM de BAP e 0,5 µM de AG3 gerou a formação de plantas mais desenvolvidas, com maior número e tamanho de folhas.

Reexposure and advection of C-14-depleted organic carbon from old deposits at the upper continental slope

Outcrops of old strata at the shelf edge resulting from erosive gravity-driven flows have been globally described on continental margins. The reexposure of old strata allows for the reintroduction of aged organic carbon (OC), sequestered in marine sediments for thousands of years, into the modern carbon cycle. This pool of reworked material represents an additional source of C-14-depleted organic carbon supplied to the ocean, in parallel with the weathering of fossil organic carbon delivered by rivers from land. To understand the dynamics and implications of this reexposure at the shelf edge, a biogeochemical study was carried out in the Gulf of Lions (Mediterranean Sea) where erosive processes, driven by shelf dense water cascading, are currently shaping the seafloor at the canyon heads. Mooring lines equipped with sediment traps and current meters were deployed during the cascading season in the southwestern canyon heads, whereas sediment cores were collected along the sediment dispersal system from the prodelta regions down to the canyon heads. Evidence from grain-size, X-radiographs and Pb-210 activity indicate the presence in the upper slope of a shelly-coarse surface stratum overlying a consolidated deposit. This erosive discontinuity was interpreted as being a result of dense water cascading that is able to generate sufficient shear stress at the canyon heads to mobilize the coarse surface layer, eroding the basal strata. As a result, a pool of aged organic carbon (Delta C-14 = -944.5 +/- 24.7%; mean age 23,650 +/- 3,321 ybp) outcrops at the modern seafloor and is reexposed to the contemporary carbon cycle. This basal deposit was found to have relatively high terrigenous organic carbon (lignin = 1.48 +/- 0.14 mg/100 mg OC), suggesting that this material was deposited during the last low sea-level stand. A few sediment trap samples showed anomalously depleted radiocarbon concentrations (Delta C-14 = -704.4 +/- 62.5%) relative to inner shelf (Delta C-14 = -293.4 +/- 134.0%), mid-shelf (Delta C-14 = -366.6 +/- 51.1%), and outer shelf (Delta C-14 = -384 +/- 47.8%) surface sediments. Therefore, although the major source of particulate material during the cascading season is resuspended shelf deposits, there is evidence that this aged pool of organic carbon can be eroded and laterally advected downslope.

What does your neighbourhood say about you? : a study of life expectancy in 1.3 million Swiss neighbourhoods

BACKGROUND: Switzerland had the highest life expectancy at 82.8 years among the Organisation for Economic Co-operation and Development (OECD) countries in 2011. Geographical variation of life expectancy and its relation to the socioeconomic position of neighbourhoods are, however, not well understood. METHODS: We analysed the Swiss National Cohort, which linked the 2000 census with mortality records 2000-2008 to estimate life expectancy across neighbourhoods. A neighbourhood index of socioeconomic position (SEP) based on the median rent, education and occupation of household heads and crowding was calculated for 1.3 million overlapping neighbourhoods of 50 households. We used skew-normal regression models, including the index and additionally marital status, education, nationality, religion and occupation to calculate crude and adjusted estimates of life expectancy at age 30 years. RESULTS: Based on over 4.5 million individuals and over 400,000 deaths, estimates of life expectancy at age 30 in neighbourhoods ranged from 46.9 to 54.2 years in men and from 53.5 to 57.2 years in women. The correlation between life expectancy and neighbourhood SEP was strong (r=0.95 in men and r=0.94 women, both p values <0.0001). In a comparison of the lowest with the highest percentile of neighbourhood SEP, the crude difference in life expectancy from skew-normal regression was 4.5 years in men and 2.5 years in women. The corresponding adjusted differences were 2.8 and 1.9 years, respectively (all p values <0.0001). CONCLUSIONS: Although life expectancy is high in Switzerland, there is substantial geographical variation and life expectancy is strongly associated with the social standing of neighbourhoods.

Social network extraction and analysis based on multimodal dyadic interaction

Social interactions are a very important component in people"s lives. Social network analysis has become a common technique used to model and quantify the properties of social interactions. In this paper, we propose an integrated framework to explore the characteristics of a social network extracted from multimodal dyadic interactions. For our study, we used a set of videos belonging to New York Times" Blogging Heads opinion blog. The Social Network is represented as an oriented graph, whose directed links are determined by the Influence Model. The links" weights are a measure of the"influence" a person has over the other. The states of the Influence Model encode automatically extracted audio/visual features from our videos using state-of-the art algorithms. Our results are reported in terms of accuracy of audio/visual data fusion for speaker segmentation and centrality measures used to characterize the extracted social network.

SEM evidence for existence of an apical disc on the scolex of Clestobothrium crassiceps (Rudolphi, 1819): comparative results of various fixation techniques

The scolex of the bothriocephalidean cestode Clestobothrium crassiceps was studied by means of scanning electron microscopy (SEM). The comparative results of various fixation procedures and techniques are presented. The scolex of C. crassiceps is oval to globular and exhibits two deep bothria which appear in the form of two lobes separated by a longitudinal groove. At the apex of the scolex, resembling a beret, an apical disc is present (oval, flattened and with a sinuous edge). Our results are compared with those previously reported in other species of Clestobothrium. This study represents the first report which highlights the presence of an apical disc in the scolex of C. crassiceps. It describes the effects of different procedures applied to our material during preparation and a comparative analysis results obtained using these various methods.

SEM evidence for existence of an apical disc on the scolex of Clestobothrium crassiceps (Rudolphi, 1819): comparative results of various fixation techniques

The scolex of the bothriocephalidean cestode Clestobothrium crassiceps was studied by means of scanning electron microscopy (SEM). The comparative results of various fixation procedures and techniques are presented. The scolex of C. crassiceps is oval to globular and exhibits two deep bothria which appear in the form of two lobes separated by a longitudinal groove. At the apex of the scolex, resembling a beret, an apical disc is present (oval, flattened and with a sinuous edge). Our results are compared with those previously reported in other species of Clestobothrium. This study represents the first report which highlights the presence of an apical disc in the scolex of C. crassiceps. It describes the effects of different procedures applied to our material during preparation and a comparative analysis results obtained using these various methods.

E-Cigarettes: A Review of New Trends in Cannabis Use.

The emergence of electronic cigarettes (e-cigs) has given cannabis smokers a new method of inhaling cannabinoids. E-cigs differ from traditional marijuana cigarettes in several respects. First, it is assumed that vaporizing cannabinoids at lower temperatures is safer because it produces smaller amounts of toxic substances than the hot combustion of a marijuana cigarette. Recreational cannabis users can discretely "vape" deodorized cannabis extracts with minimal annoyance to the people around them and less chance of detection. There are nevertheless several drawbacks worth mentioning: although manufacturing commercial (or homemade) cannabinoid-enriched electronic liquids (e-liquids) requires lengthy, complex processing, some are readily on the Internet despite their lack of quality control, expiry date, and conditions of preservation and, above all, any toxicological and clinical assessment. Besides these safety problems, the regulatory situation surrounding e-liquids is often unclear. More simply ground cannabis flowering heads or concentrated, oily THC extracts (such as butane honey oil or BHO) can be vaped in specially designed, pen-sized marijuana vaporizers. Analysis of a commercial e-liquid rich in cannabidiol showed that it contained a smaller dose of active ingredient than advertised; testing our laboratory-made, purified BHO, however, confirmed that it could be vaped in an e-cig to deliver a psychoactive dose of THC. The health consequences specific to vaping these cannabis preparations remain largely unknown and speculative due to the absence of comprehensive, robust scientific studies. The most significant health concerns involve the vaping of cannabinoids by children and teenagers. E-cigs could provide an alternative gateway to cannabis use for young people. Furthermore, vaping cannabinoids could lead to environmental and passive contamination.

Measles virus infection – Interplay between virus and host cells

Measles, caused by measles virus (MV), is a highly contagious viral disease causing severe respiratory infection and a typical rash. Despite the availability of a protective vaccine, measles is still the leading vaccine-preventable cause of childhood mortality worldwide. The high mortality associated with the disease is mainly due to an increased susceptibility to secondary infections during the period of immunosuppression that continues for several weeks after recovery. The present study was undertaken to elucidate the role of cytoskeletal components in the regulation of MV infection. The most interesting finding was that MV replication was activated in unstimulated peripheral blood mononuclear cells (PBMC) when globular actin was converted into the filamentous form with jasplakinolide. This provides a new aspect in our understanding of MV infection in PBMC. In the second part of the thesis we investigated MV-induced structural changes of cellular nuclear matrix, which is a proteinaceous framework of the nucleus similar to the cytoskeleton in the cytoplasm. We showed that cleavage of nuclear markers was virusspecific and a general caspase inhibitor rescued MV-infected cells from cell death. Furthermore, we studied MV-induced innate immune mechanisms in lung epithelial and endothelial cells. Our results showed that MV infection resulted in activation of the double stranded RNA (dsRNA) binding molecules melanoma differentiation-associated gene 5 (mda-5), retinoic acid inducible gene I (RIG-I), and toll-like receptor 3 (TLR3) gene expression, followed by high expression of antiviral cytokine mRNA.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Kunnallisen palveluyksikön toimintojen kehittäminen ja kustannusten

Työn tavoitteena on sisäisen palveluyksikön prosessikuvauksien kautta kehittää nykyistä toimintaa, laskea tuotettujen palveluiden yksikkökustannuksia ja arvioida palkitsemisen vaikutusta sisäisten tukipalveluiden tuottamisen tehostamiseen Nurmijärven kunnassa. Toimintolaskennalla saadaan aikaiseksi tuotetuille palveluille kustannukset ja tuotehinnoittelu. Tällä saadaan aikaan lähes aiheuttamisperiaatteen mukainen kustannusten kohdistaminen. Lisäksi työssä arvioidaan kustannusten kautta saavutettavaa toiminnan tehokkuutta. Työssä haastateltiin yksikön henkilökuntaa, minkä tuloksena saatiin toiminnasta prosessikuvaukset. Toimintolaskennassa tiedot kerättiin eri järjestelmistä ja yksikössä mitattiin työtehtävien hoitoon käytettyä aikaa. Kannusteiden vaikutuksista järjestettiin kolmen organisaation tietotekniikkayksiköiden henkilökunnalle kysely sekä yksikön esimiehet haastateltiin. Haastattelun avulla selvitettiin palkitsemisen nykytilannetta ja tulevaisuuden kehittämismahdollisuuksia. Tuloksena saatiin tukipalveluhinnasto, jolla toteutettiin sisäisten kustannusten kohdistaminen organisaatiossa. Tukipalveluprosessien kuvaamisen tuloksena saatiin toimenpide-ehdotuksia toteutukseen ja lisäkehittämishankkeita. Työntekijöiden kannustekyselyn tuloksena rahapalkitsemisen lisäksi nousi esiin esimiehen antaman palautteen arvostus sekä oman osaamisen kehittäminen.