Biomechanical evaluation of internal and external hexagon platform switched implant-abutment connections: An in vitro laboratory and three-dimensional finite element analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of mechanical properties of dental feldsphatic porcelains for metal and zirconia core

Studies has been reported a significant incidence of chipping of the feldspathic porcelain veneer in zirconia-based restorations. The purpose of this study was to compare the three-point flexural strength (MPa), Weibull parameters, Vickers hardness (VHN) and Vickers indentation fracture toughness (MPa/mm(1/2)) in feldspatic porcelains for metal and for zirconia frameworks. Bar specimens were made with the porcelains e.MaxCeram (EM) and VitaVM9 (V9) for zirconia core, and Duceragold (DG) and VitaVMK95 (VK) for metal core (n = 15). Kruskal-Wallis and Dun test were used for statistical analysis. There was no significant difference (p=0.31) among the porcelains in the flexural strength (Median = 73.2; 74.6; 74.5; 74.4). Weibull calculation presented highest reliability for VK (10.8) followed by em (7.1), V9 (5.7) and DG (5.6). Vickers hardness test showed that em (536.3), V9 (579.9) and VK (522.1) had no difference and DG (489.6) had the lowest value (p<.001). The highest fracture toughness was to VK (1.77), DG (1.58) had an intermediate value while V9 (1.33) and em (1.18) had the lowest values (p<.001). Despite of the suitable flexural strength, reliability and high hardness, the porcelains used to zirconia-based fixed dental prostheses showed lower fracture toughness values.

Validity of the running anaerobic sprint test for assessing anaerobic power and predicting short-distance performances

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The natural radioactivity in water by gross alpha and beta measurements

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Oldenburg Burnout Inventory - student version: cultural adaptation and validation into Portuguese

Realizou-se adaptação cultural do Inventário de Oldenburg para estudantes (OLBI-S) em português e estimou-se sua confiabilidade e validade. O OLBI-S foi preenchido por 958 estudantes universitários brasileiros e 602 portugueses. O modelo fatorial original apresentou ajustamento adequado mas foram removidos dois itens com confiabilidade individual baixa (λ<0,5). A nova estrutura apresentou bom ajustamento a 2/3 da amostra total sendo invariante no 1/3 restante da amostra. Verificou-se baixa consistência interna e validade convergente, confiabilidade compósita aceitável, boa validade discriminante, concorrente e divergente. O OLBI-S não foi invariante nas amostras de Brasil e Portugal. O OLBI-S apresentou limitações e ausência de validade transcultural nas amostras estudadas.

Copenhagen Burnout Inventory - student version: adaptation and transcultural validation for Portugal and Brazil

Realizou-se adaptação cultural do Inventário de Burnout de Copenhagen para estudantes (CBI-S) em português e estimou-se sua confiabilidade e validade. O CBI-S foi preenchido por 958 estudantes universitários brasileiros e 556 portugueses. O modelo fatorial original apresentou bom ajustamento entretanto, foram removidos dois itens com confiabilidade individual baixa (λ<0,5). A nova estrutura apresentou bom ajustamento a 2/3 da amostra total sendo invariante no 1/3 restante da amostra original. Verficou-se adequada consistência interna e validade convergente, discriminante e concorrente. Os pesos fatoriais do CBI-S não foram invariantes nas amostras de Brasil e Portugal. O CBI-S apresentou adequada confiabilidade e validade entretanto, verificou-se ausência de estabilidade transcultural.

Heavy metals in Oxisols amended with biosolids and cropped with maize in a long-term experiment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Calcium bioavailability from the kale (Brassica-oleracea) consumed as a complement of a basal rice and bean diet

The bioavailability of calcium from the kale (Brassica oleracea var. acephala) consumed as a complement of a basal rice and bean diet was studied. Three groups of diets, two controls and one experimental were fed to Wistar female rats. The protein source of the first control was casein and of the second, a mixture of bean and rice. To both groups, graded levels of CaCO3 were added. The experimental diet was similar to the second control, except that CaCO3 was substituted for kale supplying the same amount of calcio. At 35 days of experimental period, they were killed and the calcium and phosphorus were determined in the right femur. The results indicated that the calcium from the kale is better utilized than that of the CaCO3. There was no significant difference in the concentration of calcium in the soft tissues studied among three dietary groups. Considering the high concentration and availability of calcium from the kale its consumption as a complement of the basal rice and bean diet may be recommended as a cheap and good source of this mineral.

Characterization of humic-rich hydrocolloids and their metal species by means of competing ligand and metal exchange - an on-site approach

An improved on-site characterization of humic-rich hydrocolloids and their metal species in aquatic environments was the goal of the present approach. Both ligand exchange with extreme chelators ( diethylenetetraaminepentaacetic acid ( DTPA), ethylendiaminetetraacetic acid ( EDTA)) and metal exchange with strongly competitive cations (Cu(II)) were used on-site to characterize the conditional stability and availability of colloidal metal species in a humic-rich German bogwater lake ( Venner Moor, Munsterland). A mobile time-controlled tangential-flow ultrafiltration technique (cut-off: 1 kDa) was applied to differentiate operationally between colloidal metal species and free metal ions, respectively. DOC ( dissolved organic carbon) and metal determinations were carried out off-site using a home-built carbon analyzer and conventional ICP-OES ( inductively-coupled plasma-optical emission spectrometry), respectively. From the metal exchange equilibria obtained on-site the kinetic and thermodynamic stability of the original metal species ( Fe, Mn, Zn) could be characterized. Conditional exchange constants K ex obtained from aquatic metal species and competitive Cu(II) ions follow the order Mn > Zn >> Fe. Obviously, Mn and Zn bound to humic-rich hydrocolloids are very strongly competed by Cu( II) ions, in contrast to Fe which is scarcely exchangeable. The exchange of aquatic metal species (e.g. Fe) by DTPA/EDTA exhibited relatively slow kinetics but rather high metal availabilities, in contrast to their Cu(II) exchange.

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (GroBes Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.0 1 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriarnine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that > 100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content). (C) 2002 Elsevier B.V. B.V. All rights reserved.

Synthetic control chart for monitoring the pprocess mean and variance

In this article, we consider the synthetic control chart with two-stage sampling (SyTS chart) to control the process mean and variance. During the first stage, one item of the sample is inspected; if its value X, is close to the target value of the process mean, then the sampling is interrupted. Otherwise, the sampling goes on to the second stage, where the remaining items are inspected and the statistic T = Sigma [x(i) - mu(0) + xi sigma(0)](2) is computed taking into account all items of the sample. The design parameter is function of X-1. When the statistic T is larger than a specified value, the sample is classified as nonconforming. According to the synthetic procedure, the signal is based on Conforming Run Length (CRL). The CRL is the number of samples taken from the process since the previous nonconforming sample until the occurrence of the next nonconforming sample. If the CRL is sufficiently small, then a signal is generated. A comparative study shows that the SyTS chart and the joint X and S charts with double sampling are very similar in performance. However, from the practical viewpoint, the SyTS chart is more convenient to administer than the joint charts.

The Strengths and Difficulties Questionnaire overseas: Evaluations and applications of the SDQ beyond Europe

Background During the few years that have passed since it became available, the Strengths and Difficulties Questionnaire (SDQ) has been extensively evaluated and widely applied to assess behaviour disorders of children and adolescents in European countries. In contrast, relatively few reports have published SDQ results obtained in other parts of the world, although its briefness and availability in over 40 languages make this instrument particularly attractive for international collaborations and cross-cultural comparisons concerning clinical and epidemiological issues. Objectives This initial overview summarises some of these non-European experiences with the SDQ by presenting a selection of projects that have either psychometrically evaluated this novel questionnaire, applied it to screen for behaviour disorders, or employed its parent-, teacher- or self-rated versions as research tools. Since a large part of the mentioned studies are ongoing or have only recently been completed, much of the work reported here is still unpublished. Conclusions Across a huge variety of cultures and languages, experience gained with the SDQ in other continents has supported European evidence of good psychometric properties and clinical utility of this questionnaire. Since worldwide usage of the SDQ can be expected to increase in the future, more international coordination is encouraged, in order to fully exploit the promising potentials of this versatile assessment tool and systematically investigate cross-cultural differences and similarities in child and adolescent behaviour.

Joint control charts for monitoring location and dispersion

The T-2 and the generalized variance vertical bar S vertical bar charts are used for monitoring the mean vector and the covariance matrix of multivariate processes. In this article, we propose for bivariate processes the use of the T-2 and the VMAX charts. The points plotted on the VMAX chart correspond to the maximum of the sample variances of the two quality characteristics. The reason to consider the VMAX statistic instead of the generalized variance vertical bar S vertical bar is the user's familiarity with the computation of simple sample variances; we can't say the same with regard to the computation of the generalized variance vertical bar S vertical bar.

Optimized Allocation of Control and Protective Devices in Electric Distribution Systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Design and validity of a questionnaire to assess sexuality in pregnant women

Background. A review of validated methods for assessing female sexual dysfunction and a review of male and female sexual dysfunction did not refer to any specific questionnaire for evaluating sexuality during pregnancy. A study was performed at the Obstetrics and Gynecology Department of Botucatu Medical School, São Paulo State University, Brazil to design and validate a pregnancy sexuality questionnaire, the Pregnancy Sexual Response Inventory (PSRI). Methods. Women with a singleton pregnancy between 10 and 35 weeks of gestation were randomly recruited. There were five phases in the development of the PSRI: (1) item selection; (2) item development; (3) determination of internal consistency, reliability and convergence; (4) content validity; and (5) determination of inter-interviewer reliability. Internal consistency and reliability were evaluated using Cronbach's alpha. Inter-interviewer reliability was assessed by evaluating the responses of 18 academics at various institutions, using Kappa Index and Student t test. Results. Good internal consistency and reliability were obtained (Cronbach's alpha coefficient = 0.79). Among the 18 academics, 13 totally agreed (K = 1.0), three partially agreed (K = 0.67) and two disagreed (K = 0.33) with the proposed questions. Comparisons of the mean PSRI domain scores made between the primary investigators and the other interviewers showed no significant differences in all domains (p > 0.05). Conclusion. PSRI is a new validated instrument for evaluating sexuality and sexual activity and related health concerns during pregnancy. © 2009 Rudge et al; licensee BioMed Central Ltd.