Deep centers in AlGaAs/GaAs GRIN-SCH SQW laser structures grown by MBE and MOCVD

The deep centers in AlGaAs/GaAs graded index-separate confinement heterostructure single quantum well (GRIN-SCHSQW) laser structures grown by MBE and MOCVD have been investigated using deep level transient spectroscopy (DLTS) technique, The majority and minority carrier DLTS spectra show that the deep (hole and electron) traps (Hi and E3), having large capture cross sections and concentrations, are observed in the graded n-AlxGa1-xAs layer of laser structures in addition to the well-known DX centers. For laser structures grown by MBE, the deep hole trap H1 and the deep electron trap E3 may be spatially localized in the interface regions of discontinuous variation Al mole fraction of the n-AlxGa1-xAs layer with x = 0.20-0.43. For laser structures grown by MOCVD, the deep electron trap E3 may be spatially localized in the n-AlxGa1-xAs layer with x = 0.18-0.30, and the DX center may be spatially localized in the interface regions of discontinuous variation Al mole fraction of the AlxGa1-xAs layer with x = 0.22-0.30.

Numerical analysis of four-wave-mixing based multichannel wavelength conversion techniques in fibers

We numerically investigate four-wave-mixing (FWM) based multichannel wavelength conversion for amplitude-modulated signals, phase-modulated signals, together with mixed amplitude and phase modulated signals. This paper also discusses the influence of stimulated Brillouin scattering (SBS) effects on high-efficiency FWM-based wavelength conversion applications. Our simulation results show that DPSK signals are more suitable for FWM-based multichannel wavelength conversion because the OOK signals will suffer from the inevitable datapattern-dependent pump depletion. In future applications, when the modulation format is partially upgraded from OOK to DPSK, the influence of OOK signals on the updated DPSK signals must be considered when using multichannel wavelength conversion. This influence becomes severe with the increase of OOK channel number. It can be concluded that DPSK signals are more appropriate for both transmission and multichannel wavelength conversion,especially in long haul and high bit-rate system.

Coupled AlxGa1-xAs-AlAs distributed Bragg reflectors for high brightness AlGaInP light emitting diodes

A novel coupled distributed Bragg reflector (DBR) with double thickness periods was theoretically analyzed based on the spontaneous radiation properties of high brightness AlGaInP light emitting diodes(LED). Several important factors were considered including spontaneous radiation angle distribution, absorption and FTR of DBR. Calculation results showed that the optimum optical thickness of single layer of the DBR deviates from 1/4 lambda. AIGaInP high brightness light emitting diodes both with Al0.5Ga0.5As/AlAs coupled DBR and with conventional DBR were fabricated by metalorganic chemical vapor deposition(MOCVD). X-ray double crystal diffraction and reflection spectrum were employed to determine the thickness and reflectivity of the DBR. It was found that reflectivity of coupled DBR is less sensitive to incident angle than conventional DBR, higher external quantum efficiency of light emitting diodes with coupled DBR was obtained than that with conventional DBR.

High brightness AlGaInP orange light emitting diodes

Orange AlGaInP high brightness light emitting diodes (LEDs) were fabricated by low pressure metalorganic chemical vapor deposition(LP-MOCVD) technology. AlGaInP double heterojunction structure was used as active layer. 15 pairs of Al0.5Ga0.5As/AlAs distributed Bragg reflector and 7 mu m Al0.8Ga0.2As current spreading layer were employed to reduce the absorption of GaAs substrate and upper anode respectively. At 20mA the LEDs emitting wavelength was between 600-610nm with 18.3nm FWHM, 0.45mW radiation power and 1.7% external quantum efficiency. Brightness of the LED chips and LED lamps with 15 degrees viewing angle(2 theta(1/2)) reached 30mcd and 1000mcd respectively.

requirement analysis of information and knowledge management in postmodern perspective on curriculum

National Basic Research Program of China; Chinese Academy of Sciences; Information Society Technologies; Institute of Computing Technology, Chinese Academy of Sciences; Zhuhai National Hi-tech Industrial Development Zone

中国东北地区主要树种分布与气候的相关关系研究

在广泛收集和系统整理东北地区主要树种分布资料和气象资料的基础上，利用目前国际上认为较好的三种研究植被－气候关系的指标和方法，包括Kira方法、Holdridge生命地带分类系统和Thornthwaite方法，研究了东北地区主要树种分布与水热条件的关系，找出了它们的地理分布特征和气候指标特征，建立起该地区主要树种分布与气候的关系。 利用Kira的温暖指数（WI）、寒冷指数（CI）及徐文铎的湿度指数（HI）计算了东北地区主要树种的水热指标值，划分了主要树种的Kira水热指标分布类群。 计算了东北地区主要树种的Holdridge生物温度BT、可能蒸散APE及可能蒸散率PER,划分了东北地区主要树种的Holdridge水热指标分布类群。 计算了东北地区主要树种的Thornthwaite潜在可能蒸散PE及湿润指数IM，并划分了主要树种的Thornthwaite水热指标分布类群。 这三种方法所反映的东北地区主要树种分布与气候的相互关系基本是一致的，不同植被地带的优势种和常见种分布在不同的气候指标范围内，即气候条件决定了主要树种的分布，而主要树种的分布也反映出东北地区气候的特征。 对以上几种方法进行相关分析表明，各气候指标之间是高度相关的，Kira温暖指数和寒冷指数以及Holdridge生命地带分类系统与植被的对应性好，且计算简便，适用于东北地区植被与气候的相关性研究。利用这三种方法综合对东北地区主要树种进行了分类，将树种划分为八个水热分布类群，反映出这些树种沿热量和水分梯度的分布格局。

丘陵半干旱区春小不知所云水肥耦合效应

采用312-D最优饱和设计，在丘陵半干旱区开展了连续4年的田间试验，深入地研究了春小麦水肥祸合效应。水肥单因子对产量和水分利用效率（WUE）有显著影响，大小顺序为：水＞磷＞氮，其中三个因子对产量的提高均是正效应，而对WUE的提高，氮、磷施用量是正效应，过量灌溉是负效应；两因子间祸合作用的强弱顺序为：氮与水祸合＞氮与磷祸合＞磷与水祸合，其中氮与磷祸合，以及氮与水祸合对提高产量和认心E均表现为极显著相互促进作用，而磷与水祸合表现为不显著的相互替代作用。水肥祸合通过提高气孔导度（Gs）、蒸腾速率（Tr）、叶表面相对湿度（RH）、叶内水浓度（Hi）和降低胞间COZ浓度（Ci），来提高叶片光合速率（Pn）。氮素营养缺乏引起叶片“光合午休”现象的发生，增加施氮量可以避免“光合午休”现象的发生。籽粒产量与灌浆期叶片Pn呈正相关。水肥单因子对叶片Pn影响的大小顺序是：氮＞磷＞水；因子间藕合作用强弱顺序为：氮与水棍合＞磷与水祸合＞氮与磷祸合。水肥优化管理是提高产量、叶片Pn及WUE的重要途径。中等用量的氮、磷、水藕合可以达到高产、高效，获得较高的WUE和叶片Pn，实现节水高产高效与较高叶片Pn的统一，为春小麦科学灌溉施肥提供了理论依据。

PEGylated Phospholipid Membrane on Polymer Cushion and Its Interaction with Cholesterol

By employing poly(ethylene glycol) (PEG) shielding and a polymer cushion to achieve air stability of the lipid membrane, we have analyzed PEG influence on dried membranes and the interaction with cholesterol. Small unilamellar vesicles (SUVs) formed by the mixture of 1,2-dimyristoylphosphatidylcholine (DMPC) with different molar fraction of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG(2000)) adsorb and fuse into membranes on different polymer-modified silicon dioxide surfaces, including chitosan, poly(L-lysine) (PLL), and hyaluronic acid, Dried membranes arc further examined by ellipsometer and atomic force microscopy (AFM). Only chitosan can support a visible and uniform lipid array. The thickness of dry PEGylated lipid membrane is reduced gradually as the molar fraction of PEG increases. AFM scanning confirms the lipid membrane stacking for vesicles containing low PEG, and only a proper amount of PEG can maintain a single lipid hi lover; however, the air stability of the membrane will be destroyed if overloading. PEG. Cholesterol incorporation can greatly improve the structural stability of lipid membrane, especially for those containing high molar fraction of PEG. Different amounts of cholesterol influence the thickness and surface morphology of dried membrane.

PHYSICAL MODEL FOR SMALL SCALE SANDWAVES MIGRATION IN NORTH GULF OF SOUTH CHINA SEA

The aim of this paper is to investigate the mechanism of small scale sand-wave migration. According to the environmental characteristic of the north gulf of South China Sea, a quasi-3D mechanics model has been built for simulating the small scale sand wave migration. The calculation results are shown to be consistent with the observed data in the trough of sand ridge. Considering the effect of environmental actions and sand wave features, we develop an effective formula to predict sand-wave migration. It is indicated that the physical models should be used to predict the migration of the small scale sand-wave, which is rarely dominated by wave activity.

PREDICTION OF VORTEX-INDUCED VIBRATION OF FLEXIBLE RISER USING AN IMPROVED WAKE-OSCILLATOR MODEL

Based on improving the wake-oscillator model, an analytical model for vortex-induced vibration (VIV) of flexible riser under non-uniform current is presented, in which the variation of added mass at lock-in and the nonlinear relationship between amplitude of response and reduced velocity are considered. By means of empirical formula combining iteration computation, the improved analytical model can be conveniently programmed into computer code with simpler and faster computation process than CFD so as to be suitable to application of practical engineering. This model is validated by comparing with experimental result and numerical simulation. Our results show that the improved model can predict VIV response and lock-in region more accurately. At last, illustrative examples are given in which the amplitude of response of flexible riser experiencing VIV under action of non-uniform current is calculated and effects of riser tension and flow distribution along span of riser are explored. It is demonstrated that with the variation of tension and flow distribution, lock-in region of mode behaves in different way, and thus the final response is a synthesis of response of locked modes.

INVESTIGATING A NEAR-BED SUBMARINE PIPELINE IN A CURRENT

This paper considers the lift forces acting on a pipeline with a small gap between the pipeline and the plane bottom or scoring bottom. A more reasonable fluid force on the pipeline has been obtained by applying the knowledge of modified potential theory (MPT), which includes the influences of the downstream wake. By finite element method, an iteration procedure is used to solve problems of the nonlinear fluid-structure interaction. Comparing the deflection and the stress distributions with the difference sea bottoms, the failure patterns of a spanning pipeline have been discussed. The results are essential for engineers to assess pipeline stability.

Study on peak overpressure and flame propagation speed of gas deflagration in the tube with obstacles

The on-way peak overpressure and flame propagation speed of gas deflagration in the tube with obstacles are important data for process safety. Based on carbon monoxide deflagration experiments, the paper presents a multi-zone integration model for calculation of on-way peak overpressure, in which the tube with obstacles is considered as a series of venting explosion enclosures which link each others. The analysis of experimental data indicates that the on-way peak overpressure of gas deflagration can be correlated as an empirical formula with equivalence ratio of carbon monoxide oxidation, expansion ratio, flame path length, etc., and that the on-way peak overpressure exhibits a linear relationship with turbulence factor and flame propagation speed. An empirical formula of flame propagation speed is given.

~(19)F+~(27)Al耗散反应产物激发函数的长程关联

在中国原子能科学研究院的HI-13串列静电加速器上完成了19F+27Al耗散反应产物的激发函数测量。束流19F的入射能量从110.25MeV到118.75MeV,步长250keV,测量了实验室系+57°,+31°,-15°和-29°出射的类弹产物B,C,N,O,F和Ne的激发函数。观测到激发函数具有耗散反应的特征涨落结构,分析了激发函数之间的长程角度关联以及强烈的电荷数关联。

高电离态Ti原子EUV光谱的实验研究

在中国原子能研究院HI-13串列加速器上用束-箔技术完成了80MeVTi离子和C箔相互作用产生的高电离态离子谱观测,与用激光等离子体技术的实验结果做了比较,大多数谱线与激光等离子体技术的实验结果有较好的符合,有3条谱线是未观测到的.这几条谱线为ⅩⅧ13·406,ⅩⅧ14·987,X17·439nm,属于2s2p24P3/2—2p32D3/2,2s2p21S0—2sp31P1,4p1P0—5d1P1跃迁.

~(19)F+~(27)Al耗散反应产物截面测量中的不重复性

在中国原子能科学研究院的HI-13串列静电加速器上完成了114MeV和118．75MeV的19F+27Al 耗散反应产物B,C,N,O,F,Ne,Na和Mg的微分截面测量．条形27Al同位素靶的大小尺寸为 10mm×50mm,平均厚度约67μg／cm2．固定入射束流19F的能量,通过移动靶位,先后轰击了靶上20个不同的位置．实验结果表明,在弹靶系统、入射能量以及探测系统都相同的多次独立的微分截面测量中,截面的涨落不呈现高斯型几率分布．截面测量的这种不重复现象难以用有限计数率的统计性质来解释．