Avaliação da incerteza de medição no Setor Médico-hospitalar

This study aims to evaluate the uncertainty associated with measurements made by aneroid sphygmomanometer, neonatal electronic balance and electrocautery. Therefore, were performing repeatability tests on all devices for the subsequent execution of normality tests using Shapiro-Wilk; identification of influencing factors that affect the measurement result of each measurement; proposition of mathematical models to calculate the measurement uncertainty associated with measuring evaluated for all equipament and calibration for neonatal electronic balance; evaluation of the measurement uncertainty; and development of a computer program in Java language to systematize the calibration uncertainty of estimates and measurement uncertainty. It was proposed and carried out 23 factorial design for aneroid sphygmomanometer order to investigate the effect of temperature factors, patient and operator and another 32 planning for electrocautery, where it investigated the effects of temperature factors and output electrical power. The expanded uncertainty associated with the measurement of blood pressure significantly reduced the extent of the patient classification tracks. In turn, the expanded uncertainty associated with the mass measurement with neonatal balance indicated a variation of about 1% in the dosage of medication to neonates. Analysis of variance (ANOVA) and the Turkey test indicated significant and indirectly proportional effects of temperature factor in cutting power values and clotting indicated by electrocautery and no significant effect of factors investigated for aneroid sphygmomanometer.

Utilização de pulsos de radiofrequência fortemente modulados no processamento de informação quântica via ressonância magnética nuclear

Nesta dissertação apresentamos um trabalho de desenvolvimento e utilização de pulsos de radiofreqüência modulados simultaneamente em freqüência, amplitude e fase (pulsos fortemente modulados, SMP, do inglês Strongly Modulated Pulses) para criar estados iniciais e executar operações unitárias que servem como blocos básicos para processamento da informação quântica utilizando Ressonância Magnética Nuclear (RMN). As implementações experimentais foram realizas em um sistema de 3 q-bits constituído por spins nucleares de Césio 133 (spin nuclear 7/2) em uma amostra de cristal líquido em fase nemática. Os pulsos SMP´s foram construídos teoricamente utilizando um programa especialmente desenvolvido para esse fim, sendo o mesmo baseado no processo de otimização numérica Simplex Nelder-Mead. Através deste programa, os pulsos SMP foram otimizados de modo a executarem as operações lógicas desejadas com durações consideravelmente menores que aquelas realizadas usando o procedimento usual de RMN, ou seja, seqüências de pulsos e evoluções livres. Isso tem a vantagem de reduzir os efeitos de descoerência decorrentes da relaxação do sistema. Os conceitos teóricos envolvidos na criação dos SMPs são apresentados e as principais dificuldades (experimentais e teóricas) que podem surgir devido ao uso desses procedimentos são discutidas. Como exemplos de aplicação, foram produzidos os estados pseudo-puros usados como estados iniciais de operações lógicas em RMN, bem como operações lógicas que foram posteriormente aplicadas aos mesmos. Utilizando os SMP\'s também foi possível realizar experimentalmente os algoritmos quânticos de Grover e Deutsch-Jozsa para 3 q-bits. A fidelidade das implementações experimentais foi determinadas utilizando as matrizes densidade experimentais obtidas utilizando um método de tomografia da matriz densidade previamente desenvolvido.

Dificultades del profesorado para planificar, coordinar y evaluar competencias claves. Un análisis desde la Inspección de Educación.

Este artículo presenta una investigación en la que se analizan las dificultades del profesorado para planificar, coordinar y evaluar competencias claves en una muestra de 23 centros educativos. El tema tiene hondas repercusiones ya que una mala praxis educativa de las competencias claves puede conculcar uno de los derechos fundamentales del alumnado a ser evaluado de forma objetiva (LODE: Art.6b y RD 732/1995: Art. 13.1) y poder superar las pruebas de evaluación consideradas necesarias para la obtención del título académico mínimo que otorga el estado español. La investigación se ha desarrollado desde una doble perspectiva metodológica; en primer lugar, es una investigación descriptiva en la que presentamos las características fundamentales de las competencias claves y la normativa básica para su desarrollo y evaluación. En segundo lugar,  aplicamos un procedimiento de análisis con una doble vertiente cualitativa mediante el empleo del programa Atlas-Ti y del enfoque reticular-categorial del análisis de redes sociales con la aplicación de UCINET y el visor yED Graph Editor para abordar el análisis de las principales dificultades y obstáculos detectados. Los resultados muestran que existen serias dificultades en las tres dimensiones analizadas: "planificación", "coordinación" y "evaluación" de competencias clave; especialmente en la necesidad de formación del profesorado, en la evaluación de las competencias, en la metodología para su desarrollo y en los procesos de coordinación interna para su consecución en los centros educativos.

The Visual Arts as a Canvas for Teaching Computer Programming

We explore the relationships between the construction of a work of art and the crafting of a computer program in Java and suggest that the structure of paintings and drawings may be used to teach the fundamental concepts of computer programming. This movement "from Art to Science", using art to drive computing, complements the common use of computing to inform art. We report on initial experiences using this approach with undergraduate and postgraduate students. An embryonic theory of the correspondence between art and computing is presented and a methodology proposed to develop this project further.

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Page Composition using PPML as a Link-editing Script

The advantages of a COG (Component Object Graphic) approach to the composition of PDF pages have been set out in a previous paper [1]. However, if pages are to be composed in this way then the individual graphic objects must have known bounding boxes and must be correctly placed on the page in a process that resembles the link editing of a multi-module computer program. Ideally the linker should be able to utilize all declared resource information attached to each COG. We have investigated the use of an XML application called Personalized Print Markup Language (PPML) to control the link editing process for PDF COGs. Our experiments, though successful, have shown up the shortcomings of PPML's resource handling capabilities which are currently active at the document and page levels but which cannot be elegantly applied to individual graphic objects at a sub-page level. Proposals are put forward for modifications to PPML that would make easier any COG-based approach to page composition.

Projeto de estabilidade de um edifício para uma sala elétrica em betão armado e estrutura metálica

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização Estruturas

Correlação entre o sinal mecanomiográfico e a escala modificada de Ashworth durante avaliação clínica da espasticidade

Spasticity is a common disorder in people who have upper motor neuron injury. The involvement may occur at different levels. The Modified Ashworth Scale (MAS) is the most used method to measure involvement levels. But it corresponds to a subjective evaluation. Mechanomyography (MMG) is an objective technique that quantifies the muscle vibration during the contraction and stretching events. So, it may assess the level of spasticity accurately. This study aimed to investigate the correlation between spasticity levels determined by MAS with MMG signal in spastic and not spastic muscles. In the experimental protocol, we evaluated 34 members of 22 volunteers, of both genders, with a mean age of 39.91 ± 13.77 years. We evaluated the levels of spasticity by MAS in flexor and extensor muscle groups of the knee and/or elbow, where one muscle group was the agonist and one antagonist. Simultaneously the assessment by the MAS, caught up the MMG signals. We used a custom MMG equipment to register and record the signals, configured in LabView platform. Using the MatLab computer program, it was processed the MMG signals in the time domain (median energy) and spectral domain (median frequency) for the three motion axes: X (transversal), Y (longitudinal) and Z (perpendicular). For bandwidth delimitation, we used a 3rd order Butterworth filter, acting in the range of 5-50 Hz. Statistical tests as Spearman's correlation coefficient, Kruskal-Wallis test and linear correlation test were applied. As results in the time domain, the Kruskal-Wallis test showed differences in median energy (MMGME) between MAS groups. The linear correlation test showed high linear correlation between MAS and MMGME for the agonist muscle as well as for the antagonist group. The largest linear correlation occurred between the MAS and MMG ME for the Z axis of the agonist muscle group (R2 = 0.9557) and the lowest correlation occurred in the X axis, for the antagonist muscle group (R2 = 0.8862). The Spearman correlation test also confirmed high correlation for all axes in the time domain analysis. In the spectral domain, the analysis showed an increase in the median frequency (MMGMF) in MAS’ greater levels. The highest correlation coefficient between MAS and MMGMF signal occurred in the Z axis for the agonist muscle group (R2 = 0.4883), and the lowest value occurred on the Y axis for the antagonist group (R2 = 0.1657). By means of the Spearman correlation test, the highest correlation occurred between the Y axis of the agonist group (0.6951; p <0.001) and the lowest value on the X axis of the antagonist group (0.3592; p <0.001). We conclude that there was a significantly high correlation between the MMGME and MAS in both muscle groups. Also between MMG and MAS occurred a significant correlation, however moderate for the agonist group, and low for the antagonist group. So, the MMGME proved to be more an appropriate descriptor to correlate with the degree of spasticity defined by the MAS.

Soft computing based parameter identification in pavements and geomechanical systems

Accurate estimation of road pavement geometry and layer material properties through the use of proper nondestructive testing and sensor technologies is essential for evaluating pavement’s structural condition and determining options for maintenance and rehabilitation. For these purposes, pavement deflection basins produced by the nondestructive Falling Weight Deflectometer (FWD) test data are commonly used. The nondestructive FWD test drops weights on the pavement to simulate traffic loads and measures the created pavement deflection basins. Backcalculation of pavement geometry and layer properties using FWD deflections is a difficult inverse problem, and the solution with conventional mathematical methods is often challenging due to the ill-posed nature of the problem. In this dissertation, a hybrid algorithm was developed to seek robust and fast solutions to this inverse problem. The algorithm is based on soft computing techniques, mainly Artificial Neural Networks (ANNs) and Genetic Algorithms (GAs) as well as the use of numerical analysis techniques to properly simulate the geomechanical system. A widely used pavement layered analysis program ILLI-PAVE was employed in the analyses of flexible pavements of various pavement types; including full-depth asphalt and conventional flexible pavements, were built on either lime stabilized soils or untreated subgrade. Nonlinear properties of the subgrade soil and the base course aggregate as transportation geomaterials were also considered. A computer program, Soft Computing Based System Identifier or SOFTSYS, was developed. In SOFTSYS, ANNs were used as surrogate models to provide faster solutions of the nonlinear finite element program ILLI-PAVE. The deflections obtained from FWD tests in the field were matched with the predictions obtained from the numerical simulations to develop SOFTSYS models. The solution to the inverse problem for multi-layered pavements is computationally hard to achieve and is often not feasible due to field variability and quality of the collected data. The primary difficulty in the analysis arises from the substantial increase in the degree of non-uniqueness of the mapping from the pavement layer parameters to the FWD deflections. The insensitivity of some layer properties lowered SOFTSYS model performances. Still, SOFTSYS models were shown to work effectively with the synthetic data obtained from ILLI-PAVE finite element solutions. In general, SOFTSYS solutions very closely matched the ILLI-PAVE mechanistic pavement analysis results. For SOFTSYS validation, field collected FWD data were successfully used to predict pavement layer thicknesses and layer moduli of in-service flexible pavements. Some of the very promising SOFTSYS results indicated average absolute errors on the order of 2%, 7%, and 4% for the Hot Mix Asphalt (HMA) thickness estimation of full-depth asphalt pavements, full-depth pavements on lime stabilized soils and conventional flexible pavements, respectively. The field validations of SOFTSYS data also produced meaningful results. The thickness data obtained from Ground Penetrating Radar testing matched reasonably well with predictions from SOFTSYS models. The differences observed in the HMA and lime stabilized soil layer thicknesses observed were attributed to deflection data variability from FWD tests. The backcalculated asphalt concrete layer thickness results matched better in the case of full-depth asphalt flexible pavements built on lime stabilized soils compared to conventional flexible pavements. Overall, SOFTSYS was capable of producing reliable thickness estimates despite the variability of field constructed asphalt layer thicknesses.

Experiencia de la Escuela de Bibliotecología, Documentación e Información en el Desarrollo de Bases de Datos con el Programa Computacional Microisis Versión 3.0

En el campo bibliotecológico para desarrollar instrumentos de trabajo que nos permitan comunicarnos con las demás unidades y clientes de información, debemos pensar en normalizar nuestros procesos.Normalizar, en el sentido más amplio, significa seguir reglas que hagan un registro uniforme en cualquier lugar del mundo. Esto se logra mediante la aplicación de códigos y normas que han sido aceptadas internacionalmente por los organismos creados para este fin.El valor de la normalización estriba en evitar la duplicación de los esfuerzos de la catalogación en las diferentes unidades de información documental y facilitar el intercambio de datos bibliográficos tan pronto como sea posible. También, cosiste en darle al cliente la posibilidad de localizar la información en un a forma homogénea que obvie las barreras idiomáticas.

Theory and language of climate change communication

Climate change communication has become a salient topic in science and society. It has grown to be something like a booming industry alongside more established ‘communication enterprises’, such as health communication, risk communication, and science communication. This article situates the theory of climate change communication within theoretical developments in the field of science communication. It discusses the importance and difficulties inherent in talking about climate change to different types of publics using various types of communication tools and strategies. It engages with the difficult issue of the relationship between climate change communication and behavior change, and it focuses, in particular, on the role of language (metaphors, words, strategies, frames, and narratives) in conveying climate change issues to stakeholders. In the process, it attempts to provide an overview of emerging theories of climate change communication, theories that recently have begun to proliferate quite dramatically. In some cases, we can, therefore only provide signposts to the most relevant research that is being carried out with regard to climate change communication without being able to engage with all its aspects. We end with an assessment of how communication could be improved in light of the theories and practices discussed in this article.

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Transport in the blood of an anti-tumor water-soluble rutheniun cyclopentadienyl complex: a fluorescence study on albumin binding

Dissertação de mestrado, Qualidade em Análises, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

The subjunctive mood in Late Middle English adverbial clauses: the interaction of form and function

This thesis focuses on the history of the inflexional subjunctive and its functional substitutes in Late Middle English. To explore why and how the inflexional subjunctive declined in the history of English language, I analysed 2653 examples of three adverbial clauses introduced by if (1882 examples), though (305 examples) and lest (466 examples). Using a corpus-based approach, this thesis argues that linguistic change in subjunctive constructions did not happen suddenly but rather gradually, and the way it changed was varied , and that different constructions changed at different speeds in different environments. It is well known that the inflexional subjunctive declined in the history of English, mainly because of inflexional loss. Strangely however this topic has been comparatively neglected in the scholarly literature, especially with regard to the Middle English period, probably due to the limitations of data and also because study of this development requires very cumbersome textual research. This thesis has derived and analysed the data from three large corpora in the public domain: the Middle English Grammar Corpus (MEG-C for short), the Innsbruck Computer Archive of Machine-Readable English Texts (ICAMET for short), and some selected texts from The Corpus of Middle English Prose and Verse, part of the Middle English Compendium that also includes the Middle English Dictionary. The data were analysed from three perspectives: 1) clausal type, 2) dialect, and 3) textual genre. The basic methodology for the research was to analyse the examples one by one, with special attention being paid to the peculiarities of each text. In addition, this thesis draw on some complementary – indeed overlapping -- linguistic theories for further discussion: 1) Biber’s multi-dimensional theory, 2) Ogura and Wang’s (1994) S-curve or ‘diffusion’ theory, 3) Kretzchmar’s (2009) linguistics of speech, and 4) Halliday’s (1987) notion of language as a dynamic open system. To summarise the outcomes of this thesis: 1) On variation between clausal types, it was shown that the distributional tendencies of verb types (sub, ind, mod) are different between the three adverbial clauses under consideration. 2) On variation between dialects, it has been shown that the northern area, i.e. the so-called Great Scandinavian Belt, displays an especially high comparative ratio of the inflexional subjunctive construction compared to the other areas. This thesis suggests that this result was caused by the influence of Norse, relating the finding to the argument of Samuels (1989) that the present tense -es ending in the northern dialect was introduced by the influence of the Scandinavians. 3) On variation between genres, those labelled Science, Documents and Religion display relatively high ratio of the inflexional subjunctive, while Letter, Romance and History show relatively low ratio of the inflexional subjunctive. This results are explained by Biber’s multi-dimensional theory, which shows that the inflexional subjunctive can be related to the factors ‘informational’, ‘non-narrative’, ‘persuasive’ and ‘abstract’. 4) Lastly, on the inflexional subjunctive in Late Middle English, this thesis concludes that 1) the change did not happen suddenly but gradually, and 2) the way language changes varies. Thus the inflexional subjunctive did not disappear suddenly from England, and there was a time lag among the clausal types, dialects and genres, which can be related to Ogura and Wang’s S-curve (“diffusion”) theory and Kretzchmars’s view of “linguistic continuum”. This thesis has shown that the issues with regard to the inflexional subjunctive are quite complex, so that research in this area requires not only textual analysis but also theoretical analysis, considering both intra- and extra- linguistic factors.

DOMESTIC VIOLENCE IN PERSPECTIVE OF WOMEN WHO LIVED IT

Introduction: Knowing the experience of abuse, contextual determinants that led to the rupture of the situation and attempts to build a more harmonious future, it is essential to work sensitivities and better understand victims of domestic violence. Objectives: To understand the suffering of women victims of violence. Methods: This is an intentional sample of 21 women who were at shelter home or in the community. The data were collected by in- Documento descargado de http://www.elsevier.es el 13-10-2016 3rd World Congress of Health Research 21 terviews, guided by a script organized into four themes. The interviews were conducted with audio record, the permission of the participants were fully passed the text and analyzed as two different corpuses, depending on the context in which they occurred. The analysis was conducted using the ALCESTE computer program. The study obtained a favorable opinion of the Committee on Health and Welfare of the University of Évora. Results: From the irst sample analysis emerged ive classes. The association of the words gave the meaning of each class that we have appointed as Class 1 - Precipitating Events; Class 2 - Experience of abuse; Class 3 - Two feet in the present and looking into the future; Class 4 - The present and learning from the experience of abuse; and Class 5 - Violence in general. From the analysis of the sample in the community four classes emerged that we have appointed as Class 1 - Violence in general; Class 2 - Precipitating Events; Class 3 - abuse of experience; and class 4 - Support in the process. Conclusions: Women who are at shelter home have this experience of violence and its entire context a lot are very focused on their experiences and the future is distant and unclear. Women in the community have a more comprehensive view of the phenomenon of violence as a whole, they can decentralize to their personal experiences and recognize the importance of support in the future construction process.