881 resultados para Fixed Point Index
Statistical evaluation of the fixed concentration procedure for acute inhalation toxicity assessment
Resumo:
The conventional method for the assessment of acute inhalation toxicity (OECD Test Guideline 403, 1981) uses death of animals as an endpoint to identify the median lethal concentration (LC50). A new OECD Testing Guideline called the Fixed Concentration Procedure (FCP) is being prepared to provide an alternative to Test Guideline 403. Unlike Test Guideline 403, the FCP does not provide a point estimate of the LC50, but aims to identify an airborne exposure level that causes clear signs of nonlethal toxicity. This is then used to assign classification according to the new Globally Harmonized System of Classification and Labelling scheme (GHS). The FCP has been validated using statistical simulation rather than byin vivo testing. The statistical simulation approach predicts the GHS classification outcome and the numbers of deaths and animals used in the test for imaginary substances with a range of LC50 values and dose response curve slopes. This paper describes the FCP and reports the results from the statistical simulation study assessing its properties. It is shown that the procedure will be completed with considerably less death and suffering than Test Guideline 403, and will classify substances either in the same or a more stringent GHS class than that assigned on the basis of the LC50 value.
Resumo:
The successful implementation of just-in-time (JIT) purchasing policy in many industries has prompted many companies that still use the economic order quantity (EOQ) purchasing policy to ponder if they should switch to the JIT purchasing policy. Despite existing studies that directly compare the costs between the EOQ and JIT purchasing systems, this decision is, however, still difficult to be made, especially when price discount has to be considered. JIT purchasing may not always be successful even though plants that adopted JIT operations have experienced or can take advantage of physical space reduction. Hence, the objective of this study is to expand on a classical EOQ with a price discount model to derive the EOQ–JIT cost indifference point. The objective was tested and achieved through a survey and case study conducted in the ready-mixed concrete industry in Singapore.
Resumo:
This letter has tested the canopy height profile (CHP) methodology as a way of effective leaf area index (LAIe) and vertical vegetation profile retrieval at a single-tree level. Waveform and discrete airborne LiDAR data from six swaths, as well as from the combined data of six swaths, were used to extract the LAIe of a single live Callitris glaucophylla tree. LAIe was extracted from raw waveform as an intermediate step in the CHP methodology, with two different vegetation-ground reflectance ratios. Discrete point LAIe estimates were derived from the gap probability using the following: 1) single ground returns and 2) all ground returns. LiDAR LAIe retrievals were subsequently compared to hemispherical photography estimates, yielding mean values within ±7% of the latter, depending on the method used. The CHP of a single dead Callitris glaucophylla tree, representing the distribution of vegetation material, was verified with a field profile manually reconstructed from convergent photographs taken with a fixed-focal-length camera. A binwise comparison of the two profiles showed very high correlation between the data reaching R2 of 0.86 for the CHP from combined swaths. Using a study-area-adjusted reflectance ratio improved the correlation between the profiles, but only marginally in comparison to using an arbitrary ratio of 0.5 for the laser wavelength of 1550 nm.
Resumo:
This study has compared preliminary estimates of effective leaf area index (LAI) derived from fish-eye lens photographs to those estimated from airborne full-waveform small-footprint LiDAR data for a forest dataset in Australia. The full-waveform data was decomposed and optimized using a trust-region-reflective algorithm to extract denser point clouds. LAI LiDAR estimates were derived in two ways (1) from the probability of discrete pulses reaching the ground without being intercepted (point method) and (2) from raw waveform canopy height profile processing adapted to small-footprint laser altimetry (waveform method) accounting for reflectance ratio between vegetation and ground. The best results, that matched hemispherical photography estimates, were achieved for the waveform method with a study area-adjusted reflectance ratio of 0.4 (RMSE of 0.15 and 0.03 at plot and site level, respectively). The point method generally overestimated, whereas the waveform method with an arbitrary reflectance ratio of 0.5 underestimated the fish-eye lens LAI estimates.
Resumo:
We give a comprehensive analysis of the Euler-Jacobi problem of motion in the field of two fixed centers with arbitrary relative strength and for positive values of the energy. These systems represent nontrivial examples of integrable dynamics and are analysed from the point of view of the energy-momentum mapping from the phase space to the space of the integration constants. In this setting, we describe the structure of the scattering trajectories in phase space and derive an explicit description of the bifurcation diagram, i.e., the set of critical value of the energy-momentum map.
Resumo:
Introduction: Orthodontic tooth movement uses mechanical forces that result in inflammation in the first days. Myeloperoxidase (MPO) is an enzyme found in polymorphonuclear neutrophil (PMN) granules, and it is used to estimate the number of PMN granules in tissues. So far, MPO has not been used to study the inflammatory alterations after the application of orthodontic tooth movement forces. The aim of this study was to determine MPO activity in the gingival crevicular fluid (GCF) and saliva (whole stimulated saliva) of orthodontic patients at different time points after fixed appliance activation. Methods: MPO was determined in the GCF and collected by means of periopaper from the saliva of 14 patients with orthodontic fixed appliances. GCF and saliva samples were collected at baseline, 2 hours, and 7 and 14 days after application of the orthodontic force. Results: Mean MPO activity was increased in both the GCF and saliva of orthodontic patients at 2 hours after appliance activation (P<0.02 for all comparisons). At 2 hours, PMN infiltration into the periodontal ligament from the orthodontic force probably results in the increased MPO level observed at this time point. Conclusions: MPO might be a good marker to assess inflammation in orthodontic movement; it deserves further studies in orthodontic therapy. (Am J Orthod Dentofacial Orthop 2010;138:613-6)
Resumo:
In this paper we introduce the concept of the index of an implicit differential equation F(x,y,p) = 0, where F is a smooth function, p = dy/dx, F(p) = 0 and F(pp) = 0 at an isolated singular point. We also apply the results to study the geometry of surfaces in R(5).
Resumo:
Using invariance by fixed-endpoints homotopies and a generalized notion of symplectic Cayley transform, we prove a product formula for the Conley-Zehnder index of continuous paths with arbitrary endpoints in the symplectic group. We discuss two applications of the formula, to the metaplectic group and to periodic solutions of Hamiltonian systems.
Resumo:
The objective of the paper is to build a Perceived Human Development Index (PHDI) framework by assembling the HDI components, namely indicators on income, health and education on their subjective version. We propose here to introduce a fourth dimension linked to perceptions on work conditions, given its role in the “happiness” literature and in social policy making. We study how perceptions on satisfaction about the individual’s satisfaction with income, education, work and health are related to their objective counterparts. We use a sample of LAC countries where we take advantage of a larger set of questions on the four groups of social variables mentioned included in the Gallup World Poll by the IADB. We emphasize the impacts of objective income and age on perceptions. Complementarily, in the appendix we use the full sample of 132 countries where a smaller set of variables can be included, which provides a greater degree of freedom to study the impact of objective HDI components observed at country level on the formation of individual’s perception on income, education, work, health and life satisfaction. These exercises provide useful insights about the workings of beneficiaries’ point of view to understand the transmission mechanism of key social policy ingredients into perceptions. In particular, the so-called PHDI may provide a complementary subjective reference to the HDI. We also study how one’s satisfaction with life is established, measuring the relative importance given to income vis-à-vis health and education. Estimating these “instantaneous happiness functions” will help to assess the relative weights attributed to income, health and education in the HDI, which is a benchmark in the multidimensional social indicators toolbox used in practice.
Resumo:
Local provision of public services has the positive effect of increasing the efficiency because each locality has its idiosyncrasies that determine a particular demand for public services. This dissertation addresses different aspects of the local demand for public goods and services and their relationship with political incentives. The text is divided in three essays. The first essay aims to test the existence of yardstick competition in education spending using panel data from Brazilian municipalities. The essay estimates two-regime spatial Durbin models with time and spatial fixed effects using maximum likelihood, where the regimes represent different electoral and educational accountability institutional settings. First, it is investigated whether the lame duck incumbents tend to engage in less strategic interaction as a result of the impossibility of reelection, which lowers the incentives for them to signal their type (good or bad) to the voters by mimicking their neighbors’ expenditures. Additionally, it is evaluated whether the lack of electorate support faced by the minority governments causes the incumbents to mimic the neighbors’ spending to a greater extent to increase their odds of reelection. Next, the essay estimates the effects of the institutional change introduced by the disclosure on April 2007 of the Basic Education Development Index (known as IDEB) and its goals on the strategic interaction at the municipality level. This institutional change potentially increased the incentives for incumbents to follow the national best practices in an attempt to signal their type to voters, thus reducing the importance of local information spillover. The same model is also tested using school inputs that are believed to improve students’ performance in place of education spending. The results show evidence for yardstick competition in education spending. Spatial auto-correlation is lower among the lame ducks and higher among the incumbents with minority support (a smaller vote margin). In addition, the institutional change introduced by the IDEB reduced the spatial interaction in education spending and input-setting, thus diminishing the importance of local information spillover. The second essay investigates the role played by the geographic distance between the poor and non-poor in the local demand for income redistribution. In particular, the study provides an empirical test of the geographically limited altruism model proposed in Pauly (1973), incorporating the possibility of participation costs associated with the provision of transfers (Van de Wale, 1998). First, the discussion is motivated by allowing for an “iceberg cost” of participation in the programs for the poor individuals in Pauly’s original model. Next, using data from the 2000 Brazilian Census and a panel of municipalities based on the National Household Sample Survey (PNAD) from 2001 to 2007, all the distance-related explanatory variables indicate that an increased proximity between poor and non-poor is associated with better targeting of the programs (demand for redistribution). For instance, a 1-hour increase in the time spent commuting by the poor reduces the targeting by 3.158 percentage points. This result is similar to that of Ashworth, Heyndels and Smolders (2002) but is definitely not due to the program leakages. To empirically disentangle participation costs and spatially restricted altruism effects, an additional test is conducted using unique panel data based on the 2004 and 2006 PNAD, which assess the number of benefits and the average benefit value received by beneficiaries. The estimates suggest that both cost and altruism play important roles in targeting determination in Brazil, and thus, in the determination of the demand for redistribution. Lastly, the results indicate that ‘size matters’; i.e., the budget for redistribution has a positive impact on targeting. The third essay aims to empirically test the validity of the median voter model for the Brazilian case. Information on municipalities are obtained from the Population Census and the Brazilian Supreme Electoral Court for the year 2000. First, the median voter demand for local public services is estimated. The bundles of services offered by reelection candidates are identified as the expenditures realized during incumbents’ first term in office. The assumption of perfect information of candidates concerning the median demand is relaxed and a weaker hypothesis, of rational expectation, is imposed. Thus, incumbents make mistakes about the median demand that are referred to as misperception errors. Thus, at a given point in time, incumbents can provide a bundle (given by the amount of expenditures per capita) that differs from median voter’s demand for public services by a multiplicative error term, which is included in the residuals of the demand equation. Next, it is estimated the impact of the module of this misperception error on the electoral performance of incumbents using a selection models. The result suggests that the median voter model is valid for the case of Brazilian municipalities.
Resumo:
From a financial perspective, this dissertation analyzes the Brazilian mutual fund industry performance for an average retail client. The most representative funds for the local population, that are the fixed income open-end ones, will be selected and their performance will be measured aiming to answer if clients of this industry obtained a proper return over their investments in the period between August 2010 and August 2013. A proper return will be understood as the preservation of the purchasing power of the individual´s savings, what is achieved with a positive performance of a mutual fund after discounting taxes, administrative fees and inflation. After obtaining an answer for the previous question, this dissertation will explore a possible alternative solution: Tesouro Direto, that is an example of a financial approach that could foster the disintermediation between savings and investments through electronic channels. New electronic platforms, with a broader scope, could be utilized to increase the efficiency of funding productive investments through better remunerating Brazilian savings. Tesouro Direto may point towards a new paradigm.
Resumo:
Esta tese traz três exercícios empíricos sobre questões de recursos humanos em escolas públicas brasileiras, aproveitando-se de uma ampla política implantada na rede estadual de São Paulo. Esta política aumenta os salários para os professores que trabalham em escolas urbanas pobres e sua regra de alocação, baseada em um corte arbitrário em um índice socioeconômico, permite a identificação de impactos causais. Em resumo, os três artigos apontam que políticas de subsídios são capazes de, de fato, manter professores nas escolas mais pobres e este efeito, por sua vez, melhora o desempenho acadêmico dos alunos. Além disso, concluímos também que esta política também reduz o absenteísmo dos professores. No entanto, como consequência do desenho dessa política, não há evidências de que o subsídio melhora o perfil dos professores alocados nessas escolas. O primeiro artigo avalia os impactos dessa política sobre a rotatividade dos professores. Concluímos que a compensação salarial reduziu a taxa de rotatividade em 7,2 pontos percentuais, o que significa uma queda de 15% sobre a média pré-tratamento. Em um modelo em forma reduzida, encontramos também evidências de que esta política pode impactar positivamente o desempenho dos alunos. O segundo artigo analisa os impactos sobre a aprendizagem dos alunos, com foco em três possíveis mecanismos: i) a rotatividade; ii) a qualidade dos professores; iii) o aumento do salário. As estimativas mostram que o único canal através do qual esta política compensatória afeta o desempenho dos alunos é a redução da rotatividade dos professores. Ao reduzir taxa de volume de negócios em um desvio-padrão, a política reduziu a proporção de alunos de baixo desempenho em cerca de meio desvio-padrão. O terceiro artigo avalia como a diferenciação salarial criada por esta política afeta absenteísmo dos professores. Os resultados mostram que, após controlar efeitos fixos de professores e escolas, pagar um salário mais elevado (em média 26% a mais) provoca uma queda de 8-22% nas faltas dos professores. Ausências que não levam a desconto de salário, como por licenças médicas, não respondem à diferenciação salarial e o impacto é maior para os professores que recebem maior incentivo.
Resumo:
The aim of this work was to develop a quality index method (QIM) scheme for whole ice-boxed refrigerated blackspot seabream and to perform shelf-life evaluations, using sensory analysis, GR Torrymeter measurements and bacterial counts of specific spoilage organisms (SSO) during chilled storage. A QIM scheme based on a total of 30 demerit points was developed. Sensory, physical and microbiological data were integrated and used to determine the rejection point. Results indicated that the shelf-life of blackspot seabream is around 12-13 days. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.
Resumo:
The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.