Midway Motorvue Bus

Image from publication: Ann Arbor the beautiful. Ann Arbor Chamber of Commerce, 1928

Children going to Green Pastures Camp

On verso: Robert Moseley, Photographer, Townsend 5-0367

Boys in front of bus at Green Pastures Camp

On verso: Robert Moseley Photographer, Townsend

Ski club and bus

On verso: 1940s-1950s. Argus Camera Photo (Daybook, image #71)

Woodward Avenue on a rainy night, Detroit, Mich.

Includes Woodward Arcade, Hippodrome and Majestic Theatre

Allocation of road and street costs.

pt. 1. An equitable solution to the problem. Sect. 1-5 by R. G. Hennes [et al.]--pt. 2. Classification, traffic volumes and annual costs of county roads and city streets in the state of Washington, by G. A. Riedesel.--pt. 3. Bases for weight-distance taxation in the state of Washington. v. 1. Automobiles & taxicabs. v. 2. Trucks & buses.--pt. 4. The benefits of rural roads to rural property, by Wm. L. Garrison.--pt. 5. The effect of freeway access uponsuburban real property values, by R. O. Wheeler.

Federal motor vehicle safety standard no. 121--air brake systems : hearings before the Subcommittee on Governmental Efficiency and the District of Columbia of the Committee on Governmental Affairs, United States Senate, Ninety-fifth Congress, first- session ....

Hearings held Dec. 6, 1977-

Analysis of an Intervention to Reduce Truck Drivers' Exposure to Whole-Body Vibration

Thesis (Master's)--University of Washington, 2016-06

Fuel cells, hydrogen and energy supply in Australia

Australia is unique in terms of its geography, population distribution, and energy sources. It has an abundance of fossil fuel in the form of coal, natural gas, coal seam methane (CSM), oil, and a variety renewable energy sources that are under development. Unfortunately, most of the natural gas is located so far away from the main centres of population that it is more economic to ship the energy as LNG to neighboring countries. Electricity generation is the largest consumer of energy in Australia and accounts for around 50% of greenhouse gas emissions as 84% of electricity is produced from coal. Unless these emissions are curbed, there is a risk of increasing temperatures throughout the country and associated climatic instability. To address this, research is underway to develop coal gasification and processes for the capture and sequestration Of CO2. Alternative transport fuels such as biodiesel are being introduced to help reduce emissions from vehicles. The future role of hydrogen is being addressed in a national study commissioned this year by the federal government. Work at the University of Queensland is also addressing full-cycle analysis of hydrogen production, transport, storage, and utilization for both stationary and transport applications. There is a modest but growing amount of university research in fuel cells in Australia, and an increasing interest from industry. Ceramic Fuel Cells Ltd. (CFCL) has a leading position in planar solid oxide fuel cells (SOFCs) technology, which is being developed for a variety of applications, and next year Perth in Western Australia is hosting a trial of buses powered by proton-exchange fuel cells. (C) 2004 Elsevier B.V. All rights reserved.

Optimization of slitlike carbon nanopores for storage of hythane fuel at ambient temperatures

Carbons with slitlike pores can serve as effective host materials for storage of hythane fuel, a bridge between the petrol combustion and hydrogen fuel cells. We have used grand canonical Monte Carlo simulation for the modeling of the hydrogen and methane mixture storage at 293 K and pressure of methane and hydrogen mixture up to 2 MPa. We have found that these pores serve as efficient vessels for the storage of hythane fuel near ambient temperatures and low pressures. We find that, for carbons having optimized slitlike pores of size H congruent to 7 angstrom ( pore width that can accommodate one adsorbed methane layer), and bulk hydrogen mole fraction >= 0.9, the volumetric stored energy exceeds the 2010 target of 5.4 MJ dm(-3) established by the U. S. FreedomCAR Partnership. At the same condition, the content of hydrogen in slitlike carbon pores is congruent to 7% by energy. Thus, we have obtained the composition corresponding to hythane fuel in carbon nanospaces with greatly enhanced volumetric energy in comparison to the traditional compression method. We proposed the simple system with added extra container filled with pure free/adsorbed methane for adjusting the composition of the desorbed mixture as needed during delivery. Our simulation results indicate that light slit pore carbon nanomaterials with optimized parameters are suitable filling vessels for storage of hythane fuel. The proposed simple system consisting of main vessel with physisorbed hythane fuel, and an extra container filled with pure free/adsorbed methane will be particularly suitable for combustion of hythane fuel in buses and passenger cars near ambient temperatures and low pressures.

Interface adaptor logic: A new model for interfacing peripherals in IP based designs

The introduction of standard on-chip buses has eased integration and boosted the production of IP functional cores. However, once an IP is bus specific retargeting to a different bus is time-consuming and tedious, and this reduces the reusability of the bus-specific IP. As new bus standards are introduced and different interconnection methods are proposed, this problem increases. Many solutions have been proposed, however these solutions either limit the IP block performance or are restricted to a particular platform. A new concept is presented that can connect IP blocks to a wide variety of interface architectures with low overhead. This is achieved through the use a special interface adaptor logic layer.

Test strategies on functionally partitioned module-based programmable architecture for base-band processing

A specialised reconfigurable architecture for telecommunication base-band processing is augmented with testing resources. The routing network is linked via virtual wire hardware modules to reduce the area occupied by connecting buses. The number of switches within the routing matrices is also minimised, which increases throughput without sacrificing flexibility. The testing algorithm was developed to systematically search for faults in the processing modules and the flexible high-speed routing network within the architecture. The testing algorithm starts by scanning the externally addressable memory space and testing the master controller. The controller then tests every switch in the route-through switch matrix by making loops from the shared memory to each of the switches. The local switch matrix is also tested in the same way. Next the local memory is scanned. Finally, pre-defined test vectors are loaded into local memory to check the processing modules. This algorithm scans all possible paths within the interconnection network exhaustively and reports all faults. Strategies can be inserted to bypass minor faults

Industrial relations in the road passenger transport industry-a political-economic analysis.

This thesis examines the British Bus and Tram Industry from 1889 to 1988. The first determinant of the pattern of industrial relations is the development of the labour-process. The labour process changes with the introduction of new technology (electrified trams and mechanised buses), the concentration and centralisation of ownership, the decline of competition, changing market position, municipal and state regulation, ownership and control. The tram industry, as a consequence of electrification, is almost wholly municipally owned and the history of the labour process from horse-trams to the decline of the industry is examined. The bus industry has a less unified structure and is examined by sector; London, Municipal, and Territorial/Provincial. The small independent sector is largely ignored. The labour process is examined from the horse-bus to the present day. The development of resistance in the labour process is discussed both as a theoretical problematic (the `Braverman Debate') and through the process of unionisation, the centralisation and bureaucratisation of the unions, the development of national bargaining structures (National Joint Industrial Council and the National Council for the Omnibus Industry), and the development of resistance to those processes. This resistance takes either a syndicalist form, or under Communist Party leadership the form of rank and file movements, or simply unofficial organisations of branch officials. The process of centralisation of the unions, bureaucratisation and the institutionalisation of bargaining and the relationship between this process and the role of the Unions in the Labour Party is examined. Neo-corporatism, that is the increasing integration of the leadership of the main Union, the T.G.W.U.with the Labour Party and with the State is discussed. In theoretical terms, this thesis considers the debate around the notion of `labour process', the relationship between labour process and labour politics and between labour process and labour history. These relationships are placed within a discussion of class consciousness.