915 resultados para 280211 Virtual Reality and Related Simulation
Resumo:
We present one of the first studies of the use of Distributed Temperature Sensing (DTS) along fibre-optic cables to purposely monitor spatial and temporal variations in ground surface temperature (GST) and soil temperature, and provide an estimate of the heat flux at the base of the canopy layer and in the soil. Our field site was at a groundwater-fed wet meadow in the Netherlands covered by a canopy layer (between 0-0.5 m thickness) consisting of grass and sedges. At this site, we ran a single cable across the surface in parallel 40 m sections spaced by 2 m, to create a 40×40 m monitoring field for GST. We also buried a short length (≈10 m) of cable to depth of 0.1±0.02 m to measure soil temperature. We monitored the temperature along the entire cable continuously over a two-day period and captured the diurnal course of GST, and how it was affected by rainfall and canopy structure. The diurnal GST range, as observed by the DTS system, varied between 20.94 and 35.08◦C; precipitation events acted to suppress the range of GST. The spatial distribution of GST correlated with canopy vegetation height during both day and night. Using estimates of thermal inertia, combined with a harmonic analysis of GST and soil temperature, substrate and soil-heat fluxes were determined. Our observations demonstrate how the use of DTS shows great promise in better characterising area-average substrate/soil heat flux, their spatiotemporal variability, and how this variability is affected by canopy structure. The DTS system is able to provide a much richer data set than could be obtained from point temperature sensors. Furthermore, substrate heat fluxes derived from GST measurements may be able to provide improved closure of the land surface energy balance in micrometeorological field studies. This will enhance our understanding of how hydrometeorological processes interact with near-surface heat fluxes.
Resumo:
Interactions between host nutrition and feeding behaviour are central to understanding the pathophysiological consequences of infections of the digestive tract with parasitic nematodes. The manipulation of host nutrition provides useful options to control gastrointestinal nematodes as a component of an integrated strategy. Focused mainly on the Hameonchus contortus infection model in small ruminants, this chapter (i) illustrates the relationship between quantitative (macro- and micro-nutrients) and qualitative (plant secondary metabolites) aspects of host nutrition and nematode infection, and (ii) shows how basic studies aimed at addressing some generic questions can help provide solutions, despite the considerable diversity of epidemiological situations and breeding systems.
Resumo:
Previous anatomical studies have been restricted to the foliar aspects of Pilocarpus. However, no anatomical studies analyzing the foliar aspects of Pilocarpus in relation to related genera have been carried out. Therefore, the aim of this study was to identify characters for future taxonomic and phylogenetic studies in Rutaceae, particularly in Pilocarpus, and to discuss the characteristics associated with the simple or compound leaf condition for the group. The petiole and the leaf blade of 14 neotropical Rutaceae species were analyzed, and the following characteristics were observed in all leaves studied: stomata on both surfaces; secretory cavities, including mesophyll type; camptodromous-brochidodromous venation pattern; and free vascular cylinder in the basal region of the petiole. Additional promising characters were identified for future taxonomic and phylogenetic studies in the Rutaceae family, especially for the Pilocarpus genera.
Resumo:
Molecular and morphological data have shown that Bombacoideae and Malvoideae together form a well-supported Malvatheca clade. Phylogenetic relationships in Bombacoideae have been studied, but some genera in Bombax s. I. have not been adequately sampled for sufficiently variable molecular markers. The relationships of Eriotheca, for example, have yet to be resolved. Here, nuclear (ITS) and chloroplast (trnL-Fand matK) sequence data from 50 exemplars of Bombacoideae and seven additional taxa from other genera of Malvatheca were used to test monophyly of Eriotheca and its relationships with related genera of Bombax s. I. Parsimony and Bayesian analyses of individual and combined sequence data suggest that Eriotheca is not monophyletic as currently circumscribed but forms a paraphyletic grade containing Pachira s. 1. The newly discovered Eriotheca + Pachira clade has a probable synapomorphy of striate seeds. In addition, two other moderately supported clades emerged within the core Bombacoideae: Pseudobombax + Ceiba s. 1. and Bombax + Spirotheca + Pachira quinata. These three clades, and the African Rhodognaphalon together constitute the major clade of core Bombacoideae, whereas Adansonia appears to be more closely related to Catostemma, Scleronema, and Cavanillesia. The phylogenetic results imply three independent migrations from the New to Old World and homoplasy in staminal morphology.
Resumo:
We consider the formal non-relativistic limit (nrl) of the : phi(4):(s+1) relativistic quantum field theory (rqft), where s is the space dimension. Following the work of R. Jackiw [R. Jackiw, in: A. Ali, P. Hood-bhoy (Eds.), Beg Memorial Volume, World Scientific, Singapore, 1991], we show that, for s = 2 and a given value of the ultraviolet cutoff K, there are two ways to perform the nrl: (i) fixing the renormalized mass m(2) equal to the bare mass m(0)(2); (ii) keeping the renormalized mass fixed and different from the bare mass mo. In the (infinite-volume) two-particle sector the scattering amplitude tends to zero as K -> infinity in case (i) and, in case (ii), there is a bound state, indicating that the interaction potential is attractive. As a consequence, stability of matter fails for our boson system. We discuss why both alternatives do not reproduce the low-energy behaviour of the full rqft. The singular nature of the nrl is also nicely illustrated for s = 1 by a rigorous stability/instability result of a different nature. (C) 2007 Elsevier Inc. All rights reserved.
Resumo:
We present our theoretical results for the structural, electronic, vibrational and optical properties of MO(2) (M = Sn, Zr, Hf and Ti) obtained by first-principles calculations. Relativistic effects are demonstrated to be important for a realistic description of the detailed structure of the electronic frequency-dependent dielectric function, as well as of the carrier effective masses. Based on our results, we found that the main contribution of the high values calculated for the oxides dielectric constants arises from the vibrational properties of these oxides, and the vibrational static dielectric constant values diminish with increasing pressure. (c) 2008 Elsevier B.V. All rights reserved.
Resumo:
Tests are described showing the results obtained for the determination of REE and the trace elements Rb, Y, Zr, Nb, Cs, Ba, Hf, Ta, Pb, Th and U with ICP-MS methodology for nine basaltic reference materials, and thirteen basalts and amphibolites from the mafic-ultramafic Niquelandia Complex, central Brazil. Sample decomposition for the reference materials was performed by microwave oven digestion (HF and HNO(3), 100 mg of sample), and that for the Niquelandia samples also by Parr bomb treatment (5 days at 200 degrees C, 40 mg of sample). Results for the reference materials were similar to published values, thus showing that the microwave technique can be used with confidence for basaltic rocks. No fluoride precipitates were observed in the microwave-digested solutions. Total recovery of elements, including Zr and Hf, was obtained for the Niquelandia samples, with the exception of an amphibolite. For this latter sample, the Parr method achieved a total digestion, but not so the microwave decomposition; losses, however, were observed only for Zr and Hf, indicating difficulty in dissolving Zr-bearing minerals by microwave acid attack.
Resumo:
Lithium salt solutions of Li(CF3SO2)(2)N, LiTFSI, in a room-temperature ionic liquid (RTIL), 1-butyl-2,3-dimethyl-imidazolium cation, BMMI, and the (CF3SO2)(2)N-, bis(trifluoromethanesulfonyl)imide anion, [BMMI][TFSI], were prepared in different concentrations. Thermal properties, density, viscosity, ionic conductivity, and self-diffusion coefficients were determined at different temperatures for pure [BMMI][TFSI] and the lithium solutions. Raman spectroscopy measurements and computer simulations were also carried out in order to understand the microscopic origin of the observed changes in transport coefficients. Slopes of Walden plots for conductivity and fluidity, and the ratio between the actual conductivity and the Nernst-Einstein estimate for conductivity, decrease with increasing LiTFSI content. All of these studies indicated the formation of aggregates of different chemical nature, as it is corroborated by the Raman spectra. In addition, molecular dynamics (MD) simulations showed that the coordination of Li+ by oxygen atoms of TFSI anions changes with Li+ concentration producing a remarkable change of the RTIL structure with a concomitant reduction of diffusion coefficients of all species in the solutions.
Resumo:
An international standard, ISO/DP 9459-4 has been proposed to establish a uniform standard of quality for small, factory-made solar heating systerns. In this proposal, system components are tested separatelyand total system performance is calculated using system simulations based on component model parameter values validated using the results from the component tests. Another approach is to test the whole system in operation under representative conditions, where the results can be used as a measure of the general system performance. The advantage of system testing of this form is that it is not dependent on simulations and the possible inaccuracies of the models. Its disadvantage is that it is restricted to the boundary conditions for the test. Component testing and system simulation is flexible, but requires an accurate and reliable simulation model.The heat store is a key component conceming system performance. Thus, this work focuses on the storage system consisting store, electrical auxiliary heater, heat exchangers and tempering valve. Four different storage system configurations with a volume of 750 litre were tested in an indoor system test using a six -day test sequence. A store component test and system simulation was carried out on one of the four configurations, applying the proposed standard for stores, ISO/DP 9459-4A. Three newly developed test sequences for intemalload side heat exchangers, not in the proposed ISO standard, were also carried out. The MULTIPORT store model was used for this work. This paper discusses the results of the indoor system test, the store component test, the validation of the store model parameter values and the system simulations.
Resumo:
The work done in this thesis attempts to demonstrate the importance of using models that can predict and represent the mobility of our society. To answer the proposed challenges two models were examined, the first corresponds to macro simulation with the intention of finding a solution to the frequency of the bus company Horários do Funchal, responsible for transport in the city of Funchal, and some surrounding areas. Where based on a simplified model of the city it was possible to increase the frequency of journeys getting an overall reduction in costs. The second model concerns the micro simulation of Avenida do Mar, where currently is being built a new roundabout (Praça da Autonomia), which connects with this avenue. Therefore it was proposed to study the impact on local traffic, and the implementation of new traffic lights for this purpose. Four possible situations in which was seen the possibility of increasing the number of lanes on the roundabout or the insertion of a bus lane were created. The results showed that having a roundabout with three lanes running is the best option because the waiting queues are minimal, and at environmental level this model will project fewer pollutants. Thus, this thesis presents two possible methods of urban planning. Transport modelling is an area that is under constant development, the global goal is to encourage more and more the use of these models, and as such it is important to have more people to devote themselves to studying new ways of addressing current problems, so that we can have more accurate models and increasing their credibility.
Resumo:
A great deal of effort has been devoted to elucidating the psychopharmacology underlying addiction and relapse. Long-term neuroadaptations in glutamate transmission seem to be of great relevance for relapse to stimulant abuse. In this study, we investigated amphetamine-induced conditioned place preference during adolescence and the reinstatement of the conditioned behavior following a priming injection of the drug 1 day (adolescence), 30 days (early adulthood) and 60 days (adulthood) after the extinction test. The nucleus accumbens was dissected immediately after the reinstatement test to examine alterations in GluR1 and NR1 subunits of glutamatergic receptors. Our results showed that a priming injection of amphetamine was able to reinstate the CPP 1 and 30 days after extinction. However, it failed to reinstate the conditioned response after 60 days. GluR1 levels were decreased on days 1 and 30 but not on day 60 while NR1 levels were unaltered in the reinstatement test. Using a relapse model we found that reinstatement of amphetamine-induced conditioning place preference during adolescence is long lasting and persists through early adulthood. Decreased levels of GluR1 in the nucleus accumbens might be related to the reinstatement of amphetamine-induced conditioning place preference. (C) 2008 IBRO. Published by Elsevier Ltd. All rights reserved.
Resumo:
Purpose: To verify the prevalence of malocclusion and the influence of harmful oral habits on deciduous dentition in 5- and 6-year-old children enrolled in Brazilian public elementary schools during 2010.Materials and Methods: Exams were conducted in 1385 children from 56 Brazilian elementary schools using the method recommended by the World Health Organization (WHO) for epidemiological surveys on oral health. Information about the type of arch, social and economic data and harmful oral habits of the children were collected through a structured questionnaire.Results: In relation to canine occlusion, a high prevalence of Class I (74.5%), followed by Class II (19.4%), was found. Among all participants, 22% showed high overjet, 7.8% showed edge-to-edge occlusion and 2.3% showed anterior crossbite. In relation to overbite, 13.2% had short overbite, 14.3% open bite and 16.8% high overbite. The presence of posterior crossbite occurred in 14.6% of children. Maxillae predominantly exhibited the type I arch (67.9%) and mandibles predominantly exhibited type II (51.7%). In relation to harmful oral habits, 43.4% used a pacifier, 84.8% used a bottle and finger sucking was reported by 17.2%.Conclusion: There was a high prevalence of malocclusion associated with oral habits harmful to deciduous dentition.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)