Bridging the Faraoni and Selli oceanic anoxic events: late Hauterivian to early Aptian dysaerobic to anaerobic phases in the Tethys

A detailed geochemical analysis was performed on the upper part of the Maiolica Formation in the Breggia (southern Switzerland) and Capriolo sections (northern Italy). The analysed sediments consist of well-bedded, partly siliceous, pelagic carbonate, which lodges numerous thin, dark and organic-rich layers. Stable-isotope, phosphorus, organic-carbon and a suite of redox-sensitive trace-element contents (RSTE: Mo, U, Co, V and As) were measured. The RSTE pattern and C-org:P-tot ratios indicate that most organic-rich layers were deposited under dysaerobic rather than anaerobic conditions and that latter conditions were likely restricted to short intervals in the latest Hauterivian, the early Barremian and the pre-Selli early Aptian. Correlations are both possible with organic-rich intervals in central Italy (the Gorgo a Cerbara section) and the Boreal Lower Saxony Basin, as well as with the facies and drowning pattern in the Helvetic segment of the northern Tethyan carbonate platform. Our data and correlations suggest that the latest Hauterivian witnessed the progressive installation of dysaerobic conditions in the Tethys, which went along with the onset in sediment condensation, phosphogenesis and platform drowning on the northern Tethyan margin, and which culminated in the Faraoni anoxic episode. This episode is followed by further episodes of dysaerobic conditions in the Tethys and the Lower Saxony Basin, which became more frequent and progressively stronger in the late early Barremian. Platform drowning persisted and did not halt before the latest early Barremian. The late Barremian witnessed diminishing frequencies and intensities in dysaerobic conditions, which went along with the progressive installation of the Urgonian carbonate platform. Near the Barremian-Aptian boundary, the increasing density in dysaerobic episodes in the Tethyan and Lower Saxony Basins is paralleled by a change towards heterozoan carbonate production on the northern Tethyan shelf. The following return to more oxygenated conditions is correlated with the second phase of Urgonian platform growth and the period immediately preceding and corresponding to the Selli anoxic episode is characterised by renewed platform drowning and the change to heterozoan carbonate production. Changes towards more humid climate conditions were the likely cause for the repetitive installation of dys- to anaerobic conditions in the Tethyan and Boreal basins and the accompanying changes in the evolution of the carbonate platform towards heterozoan carbonate-producing ecosystems and platform drowning.

Ultra-Thin PCC Overlays, January 2005

· Evaluate conventional methods of slab removal and asphalt surface preparation for subsequent overlays of portland cement concrete (PCC) in the “remove and replace” areas. · Evaluate existing asphaltic concrete surface under the “remove and patch” areas of rehabilitation areas and evaluate joint formation in the areas of patching. · Evaluate polypropylene fiber enhanced concrete at the three-inch depth to determine the cost/benefit of its inclusion. · Evaluate the performance of the rehabilitated ultra-thin whitetopping sections and the extended performance of the existing ultra-thin sections with and without patching. · Validate existing ultra-thin whitetopping design procedures of the Portland Cement Association (PCA) and American Concrete Pavement Association (ACPA) for application in Iowa.

A comparison of frailty of primary neurons, embryonic, and aging mouse cortical layers.

Superficial layers I to III of the human cerebral cortex are more vulnerable toward Aβ peptides than deep layers V to VI in aging. Three models of layers were used to investigate this pattern of frailty. First, primary neurons from E14 and E17 embryonic murine cortices, corresponding respectively to future deep and superficial layers, were treated either with Aβ1-42, okadaic acid, or kainic acid. Second, whole E14 and E17 embryonic cortices, and third, in vitro separated deep and superficial layers of young and old C57BL/6J mice, were treated identically. We observed that E14 and E17 neurons in culture were prone to death after the Aβ and particularly the kainic acid treatment. This was also the case for the superficial layers of the aged cortex, but not for the embryonic, the young cortex, and the deep layers of the aged cortex. Thus, the aged superficial layers appeared to be preferentially vulnerable against Aβ and kainic acid. This pattern of vulnerability corresponds to enhanced accumulation of senile plaques in the superficial cortical layers with aging and Alzheimer's disease.

Study of the variability in chemical composition of bark layers of Quercus Suber L. from different production areas

Cork is the bark of the cork oak tree (Quercus suber L), a renewable and biodegradable raw bioresource concentrated mainly in the Mediterranean region. Development of its potential uses as a biosorbent will require the investigation of its chemical composition; such information can be of help to understand its interactions with organic pollutants. The present study investigates the summative chemical composition of three bark layers (back, cork, and belly) of five Spanish cork samples and one cork sample from Portugal. Suberin was the main component in all the samples (21.1 to 53.1%), followed by lignin (14.8 to 31%), holocellulose (2.3 to 33.6%), extractives (7.3 to 20.4%), and ash (0.4 to 3.3%). The Kruskal-Wallis test was used to determine whether the variations in chemical composition with respect to the production area and bark layers were significant. The results indicate that, with respect to the bark layer, significant differences were found only for suberin and holocellulose contents: they were higher in the belly and cork than in the back. Based on the results presented, cork is a material with a lot of potential because of its heterogeneity in chemical composition

Point defects and texture of Pd1-xInx sputtered intermetallic thin films

Pd1-xInx thin films (0.4 < x < 0.56) were prepared by radio frequency sputtering from a multi-zone target. The properties of these Hume-Rothery alloys were studied by X-ray diffractometry, electron probe microanalysis and scanning tunneling microscopy. The diffraction spectra were analyzed to obtain the intensity ratio of the (100) superlattice line to the (200) normal line, together with the variations of the lattice constant. The results ape explained quantitatively by a model based on point defects, i.e. Pd vacancies in In-rich films and Pd antisite atoms in Pd-rich films. In-rich films grow preferentially in the [100] direction while Pd-rich films grow preferentially in the [110] direction. The grains in indium-rich sputtered films appear to be enclosed in an atomically thick, indium-rich layer. The role of texture and the influence of point defects on electrical resistivity is also reported. (C) 1996 Elsevier Science Limited.

Paleoenvironmental evolution of the Helvetic shallow-water carbonate platform near the Barremian-Aptian boundary, and its relationship with paleoceanographic and paleoclimatic change in the Tethys

Abstract:During my doctoral research, I focused on deciphering the interactions between sea-level and climate change during the Late Barremian-Early Aptian, their expression in the Tethys basin and in the Helvetic carbonate platform. The research highlights are summarized here in three points: In the Helvetic Alps, the transition between the Lower Schrattenkalk (Upper Barremian) and the Rawil Member (Lowermost Aptian) is characterized by a change from a predominantly photozoan to a heterozoan carbonate-producing system, which coincides in time with a general increase in detrital and nutrient input. The clay mineral record shows the appearance of kaolinite within the Rawil Member, whereas this mineral is absent from the uppermost Lower and lowermost Upper Schrattenkalk Members. This indicates the installation of a warmer and more humid climate during this time period. A negative peak in 513C is recorded at the top of the Lower Schrattenkalk Member, and correlates with the well-known negative excursion of -l%o occurring in other basins and dated as latest Barremian, thus confirming a latest Barremian and earliest Aptian age for the Lower Schrattenkalk and Rawil Members, respectively. Furthermore, a sequence stratigraphie framework has been defined for the Rawil Member, based on both the ecology of faunal and floral assemblages, and their palaeoenvironmental interpretation, as well as on the stacking pattern of limestone beds observed during field prospection. The presence of a sequence boundary is postulated near the top of the Lower Schrattenkalk Member, which is correlated with the earliest Aptian SbAl defined in Vercors (France). The SbAl is characterized by a maximum of proximal assemblages and by the disappearance of several benthic foraminiferal species. Within the Rawil Member itself, the stacking pattern and microfacies trends are interpreted to represent the TST of the first Aptian sequence. With regards to the pelagic setting in the Tethyan realm, I investigated the Gorgo a Cerbara section (central Italy). There, thin organic-rich layers occur episodically in pelagic carbonates of the upper Barremian portion of the Maiolica Formation. They are associated with high Corg:Ptot ratios, which indicate the presence of intermittent dysoxic to anoxic conditions. Coarse correlations are also observed between TOC, Ρ and biogenic silica contents, indicating links between Ρ availability, productivity, and organic matter preservation. The corresponding 813Ccarb and δ180 records remain, however, quite stable, indicating that these brief periods of enhanced TOC preservation did not have sufficient impact on the marine carbon household to deviate 6,3C records, and are probably not the consequence of major climate change. On the other hand, organic-rich layers become more frequent around the Barremian-Aptian boundary in both pelagic and hemi-pelagic environments (Gorgo a Cerbara and La Bédoule, France), which are correlated with negative excursions in 6l3Ccarb and 613Corg records. During the earliest Aptian, at Gorgo a Cerbara, the frequency of organic-rich intervals progressively increases and redox-sensitive trace-element enrichments become more frequent, until the highest TOC-enriched level just below the "Livello Selli", indicator of Oceanic Anoxic Event la (OAEla). The latter is associated with the well-known negative spike in 613Ccarb and S,3Corg records, a diminution in the δ,80 record interpreted as the consequence of a wanning interval, an important peak in Ρ accumulation and high Cor::Ptot ratios indicating the prevalence of anoxic conditions. The Selli Level (OAEla) documents a general cooling phase and coincides with maximum RSTE enrichments as well as high Corg:Ptot ratios, which confirm the importance of anoxic conditions during OAE1 a at this site.During the Early Aptian, environmental change on the platform is expressed by orbitolinids proliferation that may be induced by both climate change and sea-level rise. In the basin, the successive black shales horizons from the Late Barremian until the OAE la are interpreted as the progressive impact of palaeoenvironmental change probably linked to the formation of the Ontong- Java plate-basalt plateau.RésuméCe travail de thèse a permis d'investiguer les interactions entre les variations du niveau marin et les changements climatiques sur la plate-forme helvétique ainsi qu'en domaine pélagique à la limite Barrémien-Aptien (Crétacé).Dans les Alpes helvétiques, la limite Barrémien-Aptien est marquée par la transition du Schrattenkalk inférieur, caractérisé par des carbonates photozaires, au Membre de Rawil caractérisé par des carbonates héterozoaires. Cette transition est marquée par une arrivée massive d'éléments détritiques et un apport de nutriments ayant entraîné la prolifération de foraminifères agglutinés tels que les orbitolines. L'analyse des minéraux argileux indique l'apparition de la kaolinite durant le Membre de Rawil, interprétée comme l'installation d'un climat plus chaud et humide. Un pic négatif en 513C est enregistré au sommet du Schrattenkalk inférieur correspond à l'excursion négative de -1%0 bien connue en domaine pélagique et datée comme Barrémien terminal. Cette corrélation apporte un contrôle chronostratigraphique supplémentaire permettant de dater le Schrattenkalk inférieur du Barrémien sup. et le Membre de Rawil de l'Aptien inf. D'autre part, une étude stratigraphique, basée sur des observations de terrain et sur l'interprétation d'assemblages floristiques et faunistiques en terme de paléoenvironnement a permis de mettre en évidence une limite de séquence au sommet du Schrattenkalk inf., corrélable avec la SbAl définie dans le Vercors. Durant la mise en place du Membre de Rawil, l'évolution des microfaciès est interprétée comme le « Transgressive System Tract » de la première séquence aptienne.En domaine pélagique, de minces couches riches en matière organique (MO) apparaissent dès le Barrémien sup. dans la coupe de Gorgo a Cerbara (Italie). Elles sont associées à un ratio C:P élevé indiquant des conditions épisodiquement dysoxiques à anoxiques. De plus, une corrélation nette entre Carbone Organique Total (TOC), phosphore (P) et silice biogénique est observée correspondant à un lien entre Ρ disponible, productivité et préservation de la MO. Pourtant, dans le même temps, le ÔI3C et le δ1βΟ restent constants indiquant des conditions environnementales stables et un cycle du carbone non perturbé par la préservation de MO qui ne serait pas la conséquence d'un changement climatique global mais juste d'un effet local.Ala limite Barrémien-Aptien, en domaine hémi-pélagique (La Bédoule, France) et pélagique (Gorgo a Cerbara), les couches riches en MO sont plus fréquentes et plus épaisses, elles se sont déposées en même temps qu'un pic négatif en 513CCARB et ô13Coib probablement dû à un épisode volcanique. A l'Aptien inf. le TOC des niveaux riches en MO augmente progressivement en même temps que la teneur en éléments traces jusqu'au dernier enrichissement avant l'événement anoxique océanique la (OAE la) correspondant au « niveau critique inf. », indiquant des conditions anoxiques moins restreintes. Celui-ci est également caractérisé par le fameux pic négatif en Ô13C (C3), une diminution du δ180 interprétée comme un réchauffement, par un pic en Ρ et un ratio C:P élevé. L'OAE 1 a, quant à lui, enregistre un refroidissement et coïncide avec le maximum en éléments traces ainsi qu'un fort ratio C:P mettant en valeur l'importance des conditions anoxiques pendant 1ΌΑΕ la dans cette coupe alors qu'aucune perturbation n'est enregistrés à La Bédoule probablement à cause de conditions paléogéographiques locales.Durant l'Aptien inf., les changements environnementaux sur la plate-forme se marquent par la prolifération d'orbitolines due à un changement climatique et une hausse du niveau marin. En domaine profond, la succession de niveaux riches en MO du Barrémien sup. jusqu'à l'OAE la documente l'impact progressif de changements paléoenvironnementaux, probablement liés à la formation du plateau d'Ontong Java à l'ouest de l'océan Pacifique.

Silver-assisted laser desorption ionization for high spatial resolution imaging mass spectrometry of olefins from thin tissue sections.

Silver has been demonstrated to be a powerful cationization agent in mass spectrometry (MS) for various olefinic species such as cholesterol and fatty acids. This work explores the utility of metallic silver sputtering on tissue sections for high resolution imaging mass spectrometry (IMS) of olefins by laser desorption ionization (LDI). For this purpose, sputtered silver coating thickness was optimized on an assorted selection of mouse and rat tissues including brain, kidney, liver, and testis. For mouse brain tissue section, the thickness was adjusted to 23 ± 2 nm of silver to prevent ion suppression effects associated with a higher cholesterol and lipid content. On all other tissues, a thickness of at 16 ± 2 nm provided the best desorption/ionization efficiency. Characterization of the species by MS/MS showed a wide variety of olefinic compounds allowing the IMS of different lipid classes including cholesterol, arachidonic acid, docosahexaenoic acid, and triacylglyceride 52:3. A range of spatial resolutions for IMS were investigated from 150 μm down to the high resolution cellular range at 5 μm. The applicability of direct on-tissue silver sputtering to LDI-IMS of cholesterol and other olefinic compounds presents a novel approach to improve the amount of information that can be obtained from tissue sections. This IMS strategy is thus of interest for providing new biological insights on the role of cholesterol and other olefins in physiological pathways or disease.

Optical response of Cu3Ge thin films

We report an investigation on the optical properties of Cu3Ge thin films displaying very high conductivity, with thickness ranging from 200 to 2000 Å, deposited on Ge substrates. Reflectance, transmittance, and ellipsometric spectroscopy measurements were performed at room temperature in the 0.01-6.0, 0.01-0.6, and 1.4-5.0 eV energy range, respectively. The complex dielectric function, the optical conductivity, the energy-loss function, and the effective charge density were obtained over the whole spectral range. The low-energy free-carrier response was well fitted by using the classical Drude-Lorentz dielectric function. A simple two-band model allowed the resulting optical parameters to be interpreted coherently with those previously obtained from transport measurements, hence yielding the densities and the effective masses of electrons and holes.

Structural and functional characterization of (110)-oriented epitaxial La2/3Ca1/3MnO3 electrodes and SrTiO3 tunnel barriers

La2/3Ca1/3MnO3 (LCMO) films have been deposited on (110)-oriented SrTiO3 (STO) substrates. X-ray diffraction and high-resolution electron microscopy reveal that the (110) LCMO films are epitaxial and anisotropically in-plane strained, with higher relaxation along the [1¿10] direction than along the [001] direction; x-ray absorption spectroscopy data signaled the existence of a single intermediate Mn3+/4+ 3d-state at the film surface. Their magnetic properties are compared to those of (001) LCMO films grown simultaneously on (001) STO substrates It is found that (110) LCMO films present a higher Curie temperature (TC) and a weaker decay of magnetization when approaching TC than their (001) LCMO counterparts. These improved films have been subsequently covered by nanometric STO layers. Conducting atomic-force experiments have shown that STO layers, as thin as 0.8 nm, grown on top of the (110) LCMO electrode, display good insulating properties. We will show that the electric conductance across (110) STO layers, exponentially depending on the barrier thickness, is tunnel-like. The barrier height in STO (110) is found to be similar to that of STO (001). These results show that the (110) LCMO electrodes can be better electrodes than (001) LCMO for magnetic tunnel junctions, and that (110) STO are suitable insulating barriers.

Nanoscale capacitance microscopy of thin dielectric films

We present an analytical model to interpret nanoscale capacitance microscopy measurements on thin dielectric films. The model displays a logarithmic dependence on the tip-sample distance and on the film thickness-dielectric constant ratio and shows an excellent agreement with finite-element numerical simulations and experimental results on a broad range of values. Based on these results, we discuss the capabilities of nanoscale capacitance microscopy for the quantitative extraction of the dielectric constant and the thickness of thin dielectric films at the nanoscale.

Analysis of S-rich CuIn(S,Se)2 layers for photovoltaic applications: Influence of the sulfurization temperature on the crystalline properties of electrodeposited and sulfurized CuInSe2 precursors

This paper reports the microstructural analysis of S-rich CuIn(S,Se)2 layers produced by electrodeposition of CuInSe2 precursors and annealing under sulfurizing conditions as a function of the temperature of sulfurization. The characterization of the layers by Raman scattering, scanning electron microscopy, Auger electron spectroscopy, and XRD techniques has allowed observation of the strong dependence of the crystalline quality of these layers on the sulfurization temperature: Higher sulfurization temperatures lead to films with improved crystallinity, larger average grain size, and lower density of structural defects. However, it also favors the formation of a thicker MoS2 interphase layer between the CuInS2 absorber layer and the Mo back contact. Decreasing the temperature of sulfurization leads to a significant decrease in the thickness of this intermediate layer and is also accompanied by significant changes in the composition of the interface region between the absorber and the MoS2 layer, which becomes Cu rich. The characterization of devices fabricated with these absorbers corroborates the significant impact of all these features on device parameters as the open circuit voltage and fill factor that determine the efficiency of the solar cells.

Analysis by optical absorption and transmission electron microscopy of the strain inhomogeneities in InGaAs/InP strained layers

Optical absorption spectra and transmission electron microscopy (TEM) observations on InGaAs/InP layers under compressive strain are reported. From the band¿gap energy dispersion, the magnitude of the strain inhomogeneities. Is quantified and its microscopic origin is analyzed in view of the layer microstructure. TEM observations reveal a dislocation network at the layer interface the density of which correlates with ¿¿. It is concluded that local variations of dislocation density are responsible for the inhomogeneous strain field together with another mechanism that dominates when the dislocation density is very low.