Burning Graphene Layer-by-Layer

Graphene, in single layer or multi-layer forms, holds great promise for future electronics and high-temperature applications. Resistance to oxidation, an important property for high-temperature applications, has not yet been extensively investigated. Controlled thinning of multi-layer graphene (MLG), e.g., by plasma or laser processing is another challenge, since the existing methods produce non-uniform thinning or introduce undesirable defects in the basal plane. We report here that heating to extremely high temperatures (exceeding 2000 K) and controllable layer-by-layer burning (thinning) can be achieved by low-power laser processing of suspended high-quality MLG in air in "cold-wall" reactor configuration. In contrast, localized laser heating of supported samples results in non-uniform graphene burning at much higher rates. Fully atomistic molecular dynamics simulations were also performed to reveal details of oxidation mechanisms leading to uniform layer-by-layer graphene gasification. The extraordinary resistance of MLG to oxidation paves the way to novel high-temperature applications as continuum light source or scaffolding material.

Características e fatores associados às quedas atendidas em serviços de emergência

OBJETIVO: Analisar as características dos atendimentos decorrentes de quedas em serviços de urgência e emergência e identificar fatores associados. MÉTODOS: Estudo transversal com 12.617 atendimentos decorrentes de quedas registrados no Sistema de Vigilância de Violências e Acidentes, coletados em 23 capitais e Distrito Federal, de setembro a novembro de 2009, por meio de uma amostra por conglomerado. Foi utilizada a técnica de análise de correspondência, por permitir a observação conjunta de um grande número de variáveis qualitativas. RESULTADOS: A maior parte das vítimas foi do sexo masculino (56,5%), faixa etária de 0 a 19 anos (45,7%) e declarados não brancos (62,2%). A maioria das quedas ocorreu na residência (54,6%) e via pública (17,4%); 14,3% foram relacionadas ao trabalho. Os tipos predominantes foram "queda no mesmo nível" (57,0%) e "queda de escada/degrau" (15,6%). A maioria das lesões foi classificada como entorse, luxação, contusão, corte e laceração (68,3%). Quedas dentre as crianças associaram-se à ocorrência na residência; com os adolescentes na escola; e jovens na prática esportiva. Quedas em adultos estiveram associadas ao local de trabalho, queda de andaimes, telhados, escada/degrau e buracos e uso de álcool. As quedas no mesmo nível resultaram em lesões de menor gravidade, em membros inferiores e superiores, e as quedas de andaime e telhado se associaram com lesões de maior gravidade e internações. CONCLUSÕES: Os resultados mostram que estratégias para a prevenção das quedas devem ser implantadas particularmente em residências, escolas e ambientes de trabalho.

A complex chromosomal rearrangement involving chromosomes 2, 5, and X in autism spectrum disorder

Here, we describe a female patient with autism spectrum disorder and dysmorphic features that harbors a complex genetic alteration, involving a de novo balanced translocation t(2;X)(q11;q24), a 5q11 segmental trisomy and a maternally inherited isodisomy on chromosome 5. All the possibly damaging genetic effects of such alterations are discussed. In light of recent findings on ASD genetic causes, the hypothesis that all these alterations might be acting in orchestration and contributing to the phenotype is also considered. (C) 2012 Wiley Periodicals, Inc.

Predicting the connectivity of primate cortical networks from topological and spatial node properties

Abstract Background The organization of the connectivity between mammalian cortical areas has become a major subject of study, because of its important role in scaffolding the macroscopic aspects of animal behavior and intelligence. In this study we present a computational reconstruction approach to the problem of network organization, by considering the topological and spatial features of each area in the primate cerebral cortex as subsidy for the reconstruction of the global cortical network connectivity. Starting with all areas being disconnected, pairs of areas with similar sets of features are linked together, in an attempt to recover the original network structure. Results Inferring primate cortical connectivity from the properties of the nodes, remarkably good reconstructions of the global network organization could be obtained, with the topological features allowing slightly superior accuracy to the spatial ones. Analogous reconstruction attempts for the C. elegans neuronal network resulted in substantially poorer recovery, indicating that cortical area interconnections are relatively stronger related to the considered topological and spatial properties than neuronal projections in the nematode. Conclusion The close relationship between area-based features and global connectivity may hint on developmental rules and constraints for cortical networks. Particularly, differences between the predictions from topological and spatial properties, together with the poorer recovery resulting from spatial properties, indicate that the organization of cortical networks is not entirely determined by spatial constraints.

Bilden av den missbrukande kvinnan - socialsekreterares syn på kvinnor med missbruksproblematik

Missbruksproblematiken bland kvinnor har ökat och anses vara ett samhällsproblem. Inom såväl den ämnesspecifika forskningen som i praktisk verksamhet har missbrukande kvinnor ofta betraktats som utsatta och traumatiserade. Studiens syfte var att belysa socialsekreterares syn på kvinnor och kvinnligheter i samband med missbruksproblematik. Detta studerades utifrån frågeställningar om deras arbetssätt, attityder, värderingar och syn på kvinnligheter. För att få förståelse av fenomenets komplexitet användes kvalitativ metod med halvstrukturerade intervjuer samt de teoretiska perspektiven; socialkonstruktivism och symbolisk interaktionism. Analysen skedde med hjälp av meningskoncentrering och utifrån tidigare forskning. Resultatet visade att socialsekreterarnas syn huvudsakligen var samstämmig, kvinnorna beskrevs generellt som utsatta och traumatiserade. Vidare framträdde ett behov av ytterligare reflektion gällande könsperspektivet. Avslutningsvis diskuterades behovet av forskning kring män som kön.

Kunskap ger erfarenhet -erfarenhet ger kunskap : Hur socialsekreterare använder sin kunskap om barn som växer upp med psykiskt sjuka föräldrar och hur de har tillägnat sig den

SAMMANFATTNING: Området som studerats är socialsekreterares kunskaper kring barn som växer upp med psykiskt sjuka föräldrar. Syftet var att undersöka på vilket sätt socialsekreterare tillgodogör sig kunskap, om hur barns liv kan gestalta sig då en eller bägge föräldrarna lider av allvarlig psykisk ohälsa, och hur denna kunskap används i det professionella arbetet med dessa familjer. Metodologiskt hade uppsatsen ett kvalitativt angreppssätt med ett kvantitativt inslag. Avsikten med den kvantitativa delen var att få en överblick och att upptäcka eventuella mönster över dessa kunskapsområden. Studiens kvantitativa del utgör även ett underlag till den kvalitativa delen. Avsikten med den kvalitativa delen var att var att få en helhetsbild och en fördjupad förståelse för det kunskapsinnehåll och kunskapsanvändning som socialsekreterare använder sig av i denna typ av ärenden. Vi valde att intervjua fyra socialsekreterare, vilka återfanns med hjälp av ett strategiskt urval. Empirin kopplades till Lars Nordlander teoretiska referensramar, som bygger på resonemanget som han för i sin avhandling Mellan kunskap och handling. Resultatet av vår studie visade att socialsekreterare tillgodogör sig kunskap om barn som växer upp med psykiskt sjuka föräldrar, framförallt genom yrkeserfarenhet men även genom utbildning och egen reflektion. De har en sviktande kunskap om hur förälders psykiska ohälsa påverkar barn. Kunskap de använder sig av i detta arbete var svårt att tolka då socialsekreterarna själva var osäkra på detta och tidigare forskning inom området inte är gjord. Studien visar vidare att det inte räcker med att förstå barns livssituation i utredningsarbetet, utan det handlar också om att ha kunskap om psykisk ohälsa och hur de två områdena integrerar med varandra.

"Även om jag bor här i 100 år så blir det inte samma" : En kvalitativ studie av fem ensamkommande ungdomar och deras personliga identitetsutveckling i mottagarlandet.

SAMMANFATTNING: Människor tvingas fly ifrån sina hemländer på grund av våld för att söka säkerhet någon annanstans. Att människor lämnar ett land eller tvingas fly har skett under alla tider. Människor flyr från förföljelse, fattigdom, svält eller krig. Uppskattningsvis finns 19,2 miljoner människor på flykt runt om i världen och nära hälften av dessa är barn. Av de barn som befinner sig på flykt är de ensamkommande ungdomarna en viktig grupp att urskilja. Då de ensamkommande asylsökande ungdomarna är i behov av särskilt skydd. Under 2003 var de flesta ensamkommande ungdomar i Sverige från Somalia, Irak, Serbien och Montenegro. Vårt syfte är att få ökad förståelse för ensamkommande ungdomars upplevelser av hur deras identitet formats i hemlandet och senare i mottagarlandet i samspel med människor i sin omgivning. Samt vilken betydelse asylprocessen och tidigare trauman har haft för ungdomarnas personliga identitetsutveckling. De faktorer som berörts som viktiga för ungdomens personliga identitetsutveckling är förluster, boende, ovisshet, familjeåterförening och nätverk samt språket.Vi har valt att göra en explorativ studie som innefattar kvalitativa halvstrukturerade intervjuer med fem ensamkommande ungdomar. Resultatet i form av empiri och analys har utförts utifrån tidigare forskning och från Cullbergs kristeori samt relevanta begrepp som etnicitet och identitet utifrån symbolisk interaktionism. Studien har visat att samtliga ungdomar upplevt att den ovisshet de levt i under asylprocessen samt tidigare trauman har påverkat dem mycket både psykiskt och fysiskt. De ungdomar vi har intervjuat upplever alla att de idag har en ny personlighet efter att ha fått uppehållstillstånd. Den nya identiteten har enligt ungdomarna påverkats bland annat av föräldrarnas uppfostran och de nya människor de möter i mottagarlandet samt av de nya miljöerna ungdomarna befinner sig i.

Vad man ska kunna och hur man ska vara : En studie om enhetschefers och vårdbiträdens yrkeskompetens inom äldreomsorgens särskilda boendeformer

The dissertation What to do and how to be reflects upon the professional skills needed by unit managers and nursing staff within the institutions of eldercare. Throughout the study, three conceptions are essential: formal education and training, professional skills, and individual competence. In order to understand the professional skills within its proper context, an activity perspective has been applied. The study is based on empirical materials, historical and present national and municipal documents, interviews with and observations of unit managers as well as questionnaires filled in by nursing staff members. A main result is the stress the respondents put on the importance of individual competence among unit managers and nursing staff members. “How to be” is more important than formal training and professional skills. To work with – and develop – individual competence therefore becomes momentous both to job activities and to education. The result shows a discrepancy between the way professional skills are discussed and the actual work performance. A lot of tasks carried out by unit managers and nursing stuff are never mentioned in connection with professional skills. The unit manager’s task is to lead both unit operations and staff work. Such responsibilities demand basic knowledge in social sciences, an overall understanding of the work activities from political management, job conditions and duties of the nursing staff. The professional skills given priority are those present in organisations and leadership. Problematic are economic and budget tasks which may sometimes cause unit managers to give up their economic responsibility, favouring client – directed over economy – directed care. The main task of the nursing staff is the care of elderly. It calls for social, caring, medical and housekeeping skills. For this one needs an upper secondary level education supplying the students with solid knowledge within social science as well as basic medicine and an overall understanding of the situation and needs of the elderly. Throughout the study, knowledge of the demented and of other mental disorders is emphasized as well as treatment of elderly persons suffering from those disorders. Units still have a long way to go before reaching the goal that every nursing staff member be given a formal education. Some municipalities already offer employees shorter nursing staff training. As to the rest, the educational development is neglected.

Studio di biomateriali usati come scaffold per Tissue Engineering e loro caratterizzazione con tecniche spettroscopiche vibrazionali e di analisi termica

This research investigated someone of the main problems connected to the application of Tissue Engineering in the prosthetic field, in particular about the characterization of the scaffolding materials and biomimetic strategies adopted in order to promote the implant integration. The spectroscopic and thermal analysis techniques were usefully applied to characterize the chemico-physical properties of the materials such as – crystallinity; – relative composition in case of composite materials; – Structure and conformation of polymeric and peptidic chains; – mechanism and degradation rate; – Intramolecular and intermolecular interactions (hydrogen bonds, aliphatic interactions). This kind of information are of great importance in the comprehension of the interactions that scaffold undergoes when it is in contact with biological tissues; this information are fundamental to predict biodegradation mechanisms and to understand how chemico-physical properties change during the degradation process. In order to fully characterize biomaterials, this findings must be integrated by information relative to mechanical aspects and in vitro and in vivo behavior thanks to collaborations with biomedical engineers and biologists. This study was focussed on three different systems that correspond to three different strategies adopted in Tissue Engineering: biomimetic replica of fibrous 3-D structure of extracellular matrix (PCL-PLLA), incorporation of an apatitic phase similar to bone inorganic phase to promote biomineralization (PCL-HA), surface modification with synthetic oligopeptides that elicit the interaction with osteoblasts. The characterization of the PCL-PLLA composite underlined that the degradation started along PLLA fibres, which are more hydrophylic, and they serve as a guide for tissue regeneration. Moreover it was found that some cellular lines are more active in the colonization of the scaffold. In the PCL-HA composite, the weight ratio between the polymeric and the inorganic phase plays an essential role both in the degradation process and in the biomineralization of the material. The study of self-assembling peptides allowed to clarify the influence of primary structure on intermolecular and intermolecular interactions, that lead to the formation of the secondary structure and it was possible to find a new class of oligopeptides useful to functionalize materials surface. Among the analytical techniques used in this study, Raman vibrational spectroscopy played a major role, being non-destructive and non-invasive, two properties that make it suitable to degradation studies and to morphological characterization. Also micro-IR spectroscopy was useful in the comprehension of peptide structure on oxidized titanium: up to date this study was one of the first to employ this relatively new technique in the biomedical field.

Detailed analyses of mutations affecting structural formation of neuromuscular synapses in Drosophila melanogaster

The establishment of appropriate synapses between neurons and their target cells is an essential requirement for the formation of functional neuronal circuits. However, there is very little insight into the mechanisms underlying de novo formation of synapses and synaptic terminals. To identify novel genes involved in signalling or structural aspects of these processes I capitalised on possibilities provided by the model organism Drosophila. Thus, I contributed to a screen of a collection of third chromosomal mutations (Salzberg et al., 1997, Genetics 147, 1723ff.) selecting those mutant strains displaying structural defects of Drosophila neuromuscular junctions (NMJ). Carrying out genetic mapping experiments, I could assign 7 genes to interesting candidate mutations. All 7 mutations selected in this process cause size alterations of the embryonic NMJ, and one shows additional disturbances in the distribution of synaptic markers. 4 of these turned out to be transcription factors, not falling into the remit of this project. Only for one of these, the neuronal transcription factor Castor, I could show that its overgrown mutant NMJ phenotype is due to an increase in the number of motorneurons. The remaining genes encode a potential nitrophenylphosphatase, the translation initiation factor eIF4AIII, and a novel protein Waharan. Unfortunately, the nitophenylphosphatase gene was identified too late to carry out functional studies in the context of this project, but potential roles are discussed. eIF4AIII promotes NMJ size tempting to speculate that local translation at the NMJ is affected. I found that the synaptic scaffolding molecule Discs large (Dlg; orthologue of PSD95) is upregulated at eIF4AIII mutant NMJs. Targeted upregulation of Dlg can not mimic the eIF4AIII mutant phenotype, but dlg mutations suppress it. Therefore, Dlg function is required but not sufficient in this context. My findings are discussed in detail, pointing out future directions. The main focus of this work is the completely novel gene waharan (wah), an orthologue of the human gene KIAA1267 encoding a big brain protein of likewise unknown structure and function. My studies show that mutations or RNAi knock-down of wah cause NMJ overgrowth and reveal additional crucial roles in the patterning of wing imginal discs. RNAi studies suggest Wah to be required pre- and postsynaptically at NMJs and, consistently, wah is transcribed in the nervous system and muscles. Anti-Wah antisera were produced but could no longer be tested here, but preliminary studies with newly generated HA-targeted constructs suggest that Wah localises at NMJs and in neuronal nuclei. In silico analyses predict Wah to be structurally related to the Rad23-family of proteins, likely to target ubiquitinated proteins to the proteasome for degradation (Chen et al., 2002, Mol Cell Biol 22, 4902ff.) . In agreement with this prediction, poly-ubiquitinated proteins were found to accumulate in the absence of wah function, and wah-like mutant phenotypes were induced in NMJs and wing discs by knocking down proteasome function. My analysis further revealed that poly-ubiquitinated proteins are reduced in nuclei of wah mutant neurons and muscles, suggesting that Wah may play additional roles in ubiquitin-mediated nuclear import. Taken together, this study has uncovered a number of interesting candidate genes required for the de novo formation of Drosophila NMJs. 3 of these genes fell into the focus of this project. As discussed in detail, discovery of these genes and insights gained into their function have high potential to be translatable into vertebrate systems.

Generating vegetation-spectra as a basis for global monitoring of annual vegetation cycles using DOAS satellite observations

Vegetation-cycles are of general interest for many applications. Be it for harvest-predictions, global monitoring of climate-change or as input to atmospheric models.rnrnCommon Vegetation Indices use the fact that for vegetation the difference between Red and Near Infrared reflection is higher than in any other material on Earth’s surface. This gives a very high degree of confidence for vegetation-detection.rnrnThe spectrally resolving data from the GOME and SCIAMACHY satellite-instrumentsrnprovide the chance to analyse finer spectral features throughout the Red and Near Infrared spectrum using Differential Optical Absorption Spectroscopy (DOAS). Although originally developed to retrieve information on atmospheric trace gases, we use it to gain information on vegetation. Another advantage is that this method automatically corrects for changes in the atmosphere. This renders the vegetation-information easily comparable over long time-spans.rnThe first results using previously available reference spectra were encouraging, but also indicated substantial limitations of the available reflectance spectra of vegetation. This was the motivation to create new and more suitable vegetation reference spectra within this thesis.rnThe set of reference spectra obtained is unique in its extent and also with respect to its spectral resolution and the quality of the spectral calibration. For the first time, this allowed a comprehensive investigation of the high-frequency spectral structures of vegetation reflectance and of their dependence on the viewing geometry.rnrnThe results indicate that high-frequency reflectance from vegetation is very complex and highly variable. While this is an interesting finding in itself, it also complicates the application of the obtained reference spectra to the spectral analysis of satellite observations.rnrnThe new set of vegetation reference spectra created in this thesis opens new perspectives for research. Besides refined satellite analyses, these spectra might also be used for applications on other platforms such as aircraft. First promising studies have been presented in this thesis, but the full potential for the remote sensing of vegetation from satellite (or aircraft) could bernfurther exploited in future studies.

Computer aided design and finite element modeling to predict bulk mechanical properties of bone scaffolds using triply periodic minimal surfaces (progettazione assistita al calcolatore ed analisi con il metodo degli elementi finiti per predire il comportamento meccanico di scaffolds ossei creati con l'uso di superfici minime periodiche in tre direzioni)

The aim of Tissue Engineering is to develop biological substitutes that will restore lost morphological and functional features of diseased or damaged portions of organs. Recently computer-aided technology has received considerable attention in the area of tissue engineering and the advance of additive manufacture (AM) techniques has significantly improved control over the pore network architecture of tissue engineering scaffolds. To regenerate tissues more efficiently, an ideal scaffold should have appropriate porosity and pore structure. More sophisticated porous configurations with higher architectures of the pore network and scaffolding structures that mimic the intricate architecture and complexity of native organs and tissues are then required. This study adopts a macro-structural shape design approach to the production of open porous materials (Titanium foams), which utilizes spatial periodicity as a simple way to generate the models. From among various pore architectures which have been studied, this work simulated pore structure by triply-periodic minimal surfaces (TPMS) for the construction of tissue engineering scaffolds. TPMS are shown to be a versatile source of biomorphic scaffold design. A set of tissue scaffolds using the TPMS-based unit cell libraries was designed. TPMS-based Titanium foams were meant to be printed three dimensional with the relative predicted geometry, microstructure and consequently mechanical properties. Trough a finite element analysis (FEA) the mechanical properties of the designed scaffolds were determined in compression and analyzed in terms of their porosity and assemblies of unit cells. The purpose of this work was to investigate the mechanical performance of TPMS models trying to understand the best compromise between mechanical and geometrical requirements of the scaffolds. The intention was to predict the structural modulus in open porous materials via structural design of interconnected three-dimensional lattices, hence optimising geometrical properties. With the aid of FEA results, it is expected that the effective mechanical properties for the TPMS-based scaffold units can be used to design optimized scaffolds for tissue engineering applications. Regardless of the influence of fabrication method, it is desirable to calculate scaffold properties so that the effect of these properties on tissue regeneration may be better understood.

Imaging spin-filter efficiency of W(001) and Ir(001) single crystals

Während der letzten Jahre wurde für Spinfilter-Detektoren ein wesentlicher Schritt in Richtung stark erhöhter Effizienz vollzogen. Das ist eine wichtige Voraussetzung für spinaufgelöste Messungen mit Hilfe von modernen Elektronensp ektrometern und Impulsmikroskopen. In dieser Doktorarbeit wurden bisherige Arbeiten der parallel abbildenden Technik weiterentwickelt, die darauf beruht, dass ein elektronenoptisches Bild unter Ausnutzung der k-parallel Erhaltung in der Niedrigenergie-Elektronenbeugung auch nach einer Reflektion an einer kristallinen Oberfläche erhalten bleibt. Frühere Messungen basierend auf der spekularen Reflexion an einerrnW(001) Oberfläche [Kolbe et al., 2011; Tusche et al., 2011] wurden auf einenrnviel größeren Parameterbereich erweitert und mit Ir(001) wurde ein neues System untersucht, welches eine sehr viel längere Lebensdauer der gereinigten Kristalloberfläche im UHV aufweist. Die Streuenergie- und Einfallswinkel-“Landschaft” der Spinempfindlichkeit S und der Reflektivität I/I0 von gestreuten Elektronen wurde im Bereich von 13.7 - 36.7 eV Streuenergie und 30◦ - 60◦ Streuwinkel gemessen. Die dazu neu aufgebaute Messanordnung umfasst eine spinpolarisierte GaAs Elektronenquellernund einen drehbaren Elektronendetektor (Delayline Detektor) zur ortsauflösenden Detektion der gestreuten Elektronen. Die Ergebnisse zeigen mehrere Regionen mit hoher Asymmetrie und großem Gütefaktor (figure of merit FoM), definiert als S2 · I/I0. Diese Regionen eröffnen einen Weg für eine deutliche Verbesserung der Vielkanal-Spinfiltertechnik für die Elektronenspektroskopie und Impulsmikroskopie. Im praktischen Einsatz erwies sich die Ir(001)-Einkristalloberfläche in Bezug auf längere Lebensdauer im UHV (ca. 1 Messtag), verbunden mit hoher FOM als sehr vielversprechend. Der Ir(001)-Detektor wurde in Verbindung mit einem Halbkugelanalysator bei einem zeitaufgelösten Experiment im Femtosekunden-Bereich am Freie-Elektronen-Laser FLASH bei DESY eingesetzt. Als gute Arbeitspunkte erwiesen sich 45◦ Streuwinkel und 39 eV Streuenergie, mit einer nutzbaren Energiebreite von 5 eV, sowie 10 eV Streuenergie mit einem schmaleren Profil von < 1 eV aber etwa 10× größerer Gütefunktion. Die Spinasymmetrie erreicht Werte bis 70 %, was den Einfluss von apparativen Asymmetrien deutlich reduziert. Die resultierende Messungen und Energie-Winkel-Landschaft zeigt recht gute Übereinstimmung mit der Theorie (relativistic layer-KKR SPLEED code [Braun et al., 2013; Feder et al.,rn2012])

Design methods and geometric modelling of scaffolds for bone tissue engineering

Every year, thousand of surgical treatments are performed in order to fix up or completely substitute, where possible, organs or tissues affected by degenerative diseases. Patients with these kind of illnesses stay long times waiting for a donor that could replace, in a short time, the damaged organ or the tissue. The lack of biological alternates, related to conventional surgical treatments as autografts, allografts, e xenografts, led the researchers belonging to different areas to collaborate to find out innovative solutions. This research brought to a new discipline able to merge molecular biology, biomaterial, engineering, biomechanics and, recently, design and architecture knowledges. This discipline is named Tissue Engineering (TE) and it represents a step forward towards the substitutive or regenerative medicine. One of the major challenge of the TE is to design and develop, using a biomimetic approach, an artificial 3D anatomy scaffold, suitable for cells adhesion that are able to proliferate and differentiate themselves as consequence of the biological and biophysical stimulus offered by the specific tissue to be replaced. Nowadays, powerful instruments allow to perform analysis day by day more accurateand defined on patients that need more precise diagnosis and treatments.Starting from patient specific information provided by TC (Computed Tomography) microCT and MRI(Magnetic Resonance Imaging), an image-based approach can be performed in order to reconstruct the site to be replaced. With the aid of the recent Additive Manufacturing techniques that allow to print tridimensional objects with sub millimetric precision, it is now possible to practice an almost complete control of the parametrical characteristics of the scaffold: this is the way to achieve a correct cellular regeneration. In this work, we focalize the attention on a branch of TE known as Bone TE, whose the bone is main subject. Bone TE combines osteoconductive and morphological aspects of the scaffold, whose main properties are pore diameter, structure porosity and interconnectivity. The realization of the ideal values of these parameters represents the main goal of this work: here we'll a create simple and interactive biomimetic design process based on 3D CAD modeling and generative algorithmsthat provide a way to control the main properties and to create a structure morphologically similar to the cancellous bone. Two different typologies of scaffold will be compared: the first is based on Triply Periodic MinimalSurface (T.P.M.S.) whose basic crystalline geometries are nowadays used for Bone TE scaffolding; the second is based on using Voronoi's diagrams and they are more often used in the design of decorations and jewellery for their capacity to decompose and tasselate a volumetric space using an heterogeneous spatial distribution (often frequent in nature). In this work, we will show how to manipulate the main properties (pore diameter, structure porosity and interconnectivity) of the design TE oriented scaffolding using the implementation of generative algorithms: "bringing back the nature to the nature".

Anthropology in the twenty-first century : a view of, and from, Germany

The article explores the developments in German-language anthropology in the past decades, focussing on the period after the 1970s. It argues that the recent history of German-language Ethnologie (social and cultural anthropology) is one of catching-up modernization. German-speaking anthropologists are increasingly involved in, and contribute to, broader theoretical debates, publish in English and in international journals, and are actively engaged in international academic networks. The paper discusses how and under what conditions of knowledge production these transformations have taken place. It analyses the changing institutional environment in which German anthropologists have worked and work today, as well as the theoretical impulses from within and outside the discipline that have given rise to the contemporary orientation of German-language anthropology as an anthropology of the 'present'. Finally, and beyond the focus on Germany, the article offers some ideas on the future of anthropology as a symmetrical social science, characterized by a continued strong reliance on field work and a high level of 'worldliness', a basic attitude of systematically shifting perspectives, the critical reflection of the social and political embeddedness of knowledge production, and an engagement with social theory across disciplinary boundaries.