Oxidation of polycrystalline Ni studied by spectromicroscopy: Phase separation in the early stages of crystallite growth

Low-energy and photoemission electron microscopy enables the determination of facet planes of polycrystalline surfaces and the study of their chemical composition at the sub-m scale. Using these techniques the early oxidation stages of nickel were studied. After exposing the surface to 20 L of oxygen at 373 K a uniform layer of chemisorbed oxygen was found on all facets. After oxygen exposure at 473–673 K, small NiO crystallites are formed on all facets but not in the vicinity of all grain boundaries. The crystallites are separated by areas of bare Ni without significant oxygen coverage.

Efficient production of foot-and-mouth disease virus empty capsids in insect cells following down regulation of 3C protease activity

Foot-and-mouth disease virus (FMDV) is a significant economically and distributed globally pathogen of Artiodactyla. Current vaccines are chemically inactivated whole virus particles that require large-scale virus growth in strict bio-containment with the associated risks of accidental release or incomplete inactivation. Non-infectious empty capsids are structural mimics of authentic particles with no associated risk and constitute an alternate vaccine candidate. Capsids self-assemble from the processed virus structural proteins, VP0, VP3 and VP1, which are released from the structural protein precursor P1-2A by the action of the virus-encoded 3C protease. To date recombinant empty capsid assembly has been limited by poor expression levels, restricting the development of empty capsids as a viable vaccine. Here expression of the FMDV structural protein precursor P1-2A in insect cells is shown to be efficient but linkage of the cognate 3C protease to the C-terminus reduces expression significantly. Inactivation of the 3C enzyme in a P1-2A-3C cassette allows expression and intermediate levels of 3C activity resulted in efficient processing of the P1-2A precursor into the structural proteins which assembled into empty capsids. Expression was independent of the insect host cell background and leads to capsids that are recognised as authentic by a range of anti-FMDV bovine sera suggesting their feasibility as an alternate vaccine.

Numerical simulation of magnetic interactions in polycrystalline YFeO3

The magnetic behavior of polycrystalline yttrium orthoferrite was studied from the experimental and theoretical points of view. Magnetization measurements up to 170 kOe were carried out on a single-phase YFeO3 sample synthesized from heterobimetallic alkoxides. The complex interplay between weak-ferromagnetic and antiferromagnetic interactions, observed in the experimental M(H) curves, was successfully simulated by locally minimizing the magnetic energy of two interacting Fe sublattices. The resulting values of exchange field (H-E = 5590 kOe), anisotropy field (H-A = 0.5 kOe) and Dzyaloshinsky-Moriya antisymmetric field (H-D = 149 kOe) are in good agreement with previous reports on this system. (C) 2007 Elsevier B.V. All rights reserved.

Development of a sequential injection chromatography (SIC) method for determination of simazine, atrazine, and propazine

This paper describes the development of a sequential injection chromatography (SIC) procedure for separation and quantification of the herbicides simazine, atrazine, and propazine exploring the low backpressure of a 2.5 cm long monolithic C(18) column. The separation of the three compounds was achieved in less than 90 s with resolution > 1.5 using a mobile phase composed by ACN/1.25 mmol/L acetate buffer (pH 4.5) at the volumetric ratio of 35:65 and flow rate of 40 mu L/s. Detection was made at 223 nm using a flow cell with 40 mm of optical path length. The LOD was 10 mu g/L for the three triazines and the quantification limits were of 30 mu g/L for simazine and propazine and 40 mu g/L for atrazine. The sampling frequency is 27 samples per hour, consuming 1.1 mL of ACN per analysis. The proposed methodology was applied to spiked water samples and no statistically significant differences were observed in comparison to a conventional HPLC-UV method. The major metabolites of atrazine and other herbicides did not interfere in the analysis, being eluted from the column either together with the unretained peak, or at retention times well-resolved from the studied compounds.

Improving the Detectability of Sequential Injection Chromatography (SIC): Determination of Triazines by Exploiting Liquid Core Waveguide (LCW) Detection

Coupling a liquid core waveguide cell to a sequential injection chromatograph improved the detection limits for determination of triazine herbicides without compromising peak resolution. Separation of simazine, atrazine, and propazine was achieved in water samples by a 25mm long C18 monolithic column. Detection was made at 238nm using a type II LCW (silica capillary coated with Teflon (R) AF2400) cell with 100cm of optical path length. Detection limits for simazine, atrazine, and propazine were 2.3, 1.9, and 4.5 mu g L-1, respectively. Reduced analysis time and low solvent consumption are other remarkable features of the proposed method.

Crescimento térmico de filmes dielétricos sobre SiC e caracterização das estruturas formadas

Na presente tese, foi investigado o crescimento térmico de filmes dielétricos (óxido de silício e oxinitreto de silício) sobre carbeto de silício. Além disso, os efeitos da irradiação iônica do SiC antes de sua oxidação, com o intuito de acelerar a taxa de crescimento do filme de SiO2, também foram investigados. A tese foi dividida em quatro diferentes etapas. Na primeira, foram investigados os estágios iniciais da oxidação térmica do SiC: mudanças no ambiente químico dos átomos de Si foram observadas após sucessivas etapas de oxidação térmica de uma lâmina de SiC. A partir desses resultados, em conjunto com a análise composicional da primeira camada atômica da amostra, acompanhou-se a evolução do processo de oxidação nesses estágios iniciais. Na etapa seguinte, foram utilizadas as técnicas de traçagem isotópica e análise por reação nuclear com ressonância estreita na curva de seção de choque na investigação do mecanismo e etapa limitante do crescimento térmico de filmes de SiO2 sobre SiC. Nesse estudo, compararam-se os resultados obtidos de amostras de óxidos termicamente crescidos sobre Si e sobre SiC. Na terceira etapa, foram investigados os efeitos da irradiação iônica do SiC antes de sua oxidação nas características finais da estrutura formada. Finalmente, comparam-se os resultados da oxinitretação térmica de estruturas SiO2/SiC e SiO2/Si utilizando dois diferentes gases: NO e N2O.

Estudo das propriedades de revestimentos compósitos de níquel com Al2O3 e SiC

Neste trabalho foi avaliada a resistência à corrosão dos revestimentos compósitos de níquel, obtidos a partir de um banho de níquel químico (electroless) e um banho de níquel eletrolítico tipo Watts (com e sem tensoativo), caracterizando-os comparativamente em relação ao revestimento de níquel sem partículas. Os métodos utilizados para avaliação da resistência a corrosão foram: ensaio acelerado em névoa salina, voltametria cíclica, curva de polarização potenciodinâmica (em NaCl 0,6N) e dissolução anódica à corrente constante. Os revestimentos também foram avaliados com relação à resistência ao desgaste, rugosidade, e morfologia da camada. As partículas foram caracterizadas por difração de raio- X , dispersão granulométrica e potencial zeta. Nas condições estudadas os resultados mostraram que o revestimento compósito Ni-P-Al2O3 (Al2O3 - tamanho de grão ≅ 0,1 a 1,8µm) apresentou melhor resistência à corrosão que o revestimento de níquel químico sem incorporação de partículas (Ni-P) que por sua vez, apresentou resistência a corrosão superior ao compósito Ni-P-SiC no. 23 (SiC no. 23 - tamanho de grão ≅0,8 a 19,9µm). Já o eletrodepósito de níquel sem incorporação de partículas apresentou melhor resistência à corrosão que os revestimentos compósitos. Entre estes o compósito Ni-Al2O3 apresentou resistência a corrosão superior ao compósito Ni-SiC no. 23 A adição do tensoativo lauril sulfato de sódio reduz a quantidade de partículas incorporadas no eletrodepósito, sendo este efeito mais acentuado para o SiC com maior granulometria. Para diferentes granulometrias de carbeto de silício (SiC no. 2 - tamanho de grão ≅0,3 a 6,2µm e SiC no. 23 - tamanho de grão ≅0,8 a 19,9µm), o revestimento compósito obtido com o SiC que possui menor granulometria, apresentou maior resistência à corrosão e maior resistência ao desgaste, indicando desta forma que o tamanho da partícula incorporada no depósito de níquel exerce grande influência sobre a resistência à corrosão do revestimento, bem como sobre a resistência ao desgaste.

Elaboração e caracterização de revestimentos nanocompósitos Ni-P-Sic eletrodepositados

Revestimentos compósitos com incorporação de SiC (com tamanho médio 600nm e 30nm) à matriz metálica de Ni-P foram elaborados por eletrodeposição a partir de uma solução de sais de níquel, contendo um precursor fosforoso H3PO3, na qual as partículas foram colocadas em suspensão. A partir de medidas de viscosidade e velocidade de sedimentação foi evidenciado que o tamanho das partículas de SiC é uma característica importante que influencia na estabilidade das suspensões. Além disso, a presença de aditivos orgânicos, como SDS ou CTAHS, modifica as características das suspensões podendo ter, de acordo com o tamanho das partículas, um efeito sobre a taxa de incorporação da mesma no depósito durante o crescimento da matriz. Observou-se que acima de uma certa concentração de partículas em suspensão, a taxa de incorporação avaliada em função da fração em volume atinge um patamar, quando, no entanto, a mesma continua a aumentar se avaliada pelo número de partículas incorporadas. Para as suspensões com elevada concentração de partículas, o processo de incorporação torna-se seletivo, e as partículas de menor tamanho são preferencialmente incorporadas. Medidas de microdureza, análise térmica e ensaios eletroquímicos (voltametria cíclica e impedância eletroquímica) foram realizados com o objetivo de investigar o efeito da quantidade e do tamanho das partículas de SiC incorporadas, sobre o comportamento térmico, a microdureza, e a resistência à corrosão dos revestimentos compósitos Ni-P-SiC com teor em fósforo igual a 17 %at.

Especulative (sic) attack on exchange rate target zone regime : the uncertainty case

We present a continuous time target zone model of speculative attacks. Contrary to most of the literature that considers the certainty case, i.e., agents know for sure the Central Bank behavior in the future, we build uncertainty into the madel in two different ways. First, we consider the case in whicb the leveI of reserves at which the central bank lets the regime collapse is uncertain. Alternatively, we ana1ize the case in which, with some probability, the government may cbange its policy reducing the initially positive trend in domestic credito In both cases, contrary to the case of a fixed exchange rate regime, speculators face a cost of launching a tentative attack that may not succeed. Such cost induces a delay and may even prevent its occurrence. At the time of the tentative attack, the exchange rate moves either discretely up, if the attack succeeds, or down, if it fails. The remlts are consistent with the fact that, typically, an attack involves substantial profits and losses for the speculators. In particular, if agents believed that the government will control fiscal imbalances in the future, or alternatively, if they believe the trend in domestic credit to be temporary, the attack is postponed even in the presence of a signal of an imminent collapse. Finally, we aIso show that the timing of a speculative attack increases with the width of the target zone.

Estudo da sinterabilidade de ligas de níquel obtidas por meio dos portadores de liga sic, si3n4 ou si metálico com grafita

Nickel alloys are frequently used in applications that require resistance at high temperatures associated with resistance to corrosion. Alloys of Ni-Si-C can be obtained by means of powder metallurgy in which powder mixtures are made of metallic nickel powders with additions of various alloying carriers for such were used in this study SiC, Si3N4 or Si metal with graphite. Carbonyl Ni powder with mean particle size of 11 mM were mixed with 3 wt% of SiC powders with an average particle size of 15, 30 and 50 μm and further samples were obtained containing 4 to 5% by mass of SiC with average particle size of 15 μm. Samples were also obtained by varying the carrier alloy, these being Si3N4 powder with graphite, with average particle size of 1.5 and 5 μm, respectively. As a metallic Si graphite with average particle size of 12.5 and 5 μm, respectively. The reference material used was nickel carbonyl sintered without adding carriers. Microstructural characterization of the alloys was made by optical microscopy and scanning electron microscopy with semi-quantitative chemical analysis. We determined the densities of the samples and measurement of microhardness. We studied the dissociation of carriers alloy after sintering at 1200 ° C for 60 minutes. Was evaluated also in the same sintering conditions, the influence of the variation of average particle size of the SiC carrier to the proportion of 3% by mass. Finally, we studied the influence of variation of the temperatures of sintering at 950, 1080 and 1200 ° C without landing and also with heights of 30, 60, 120 and 240 minutes for sintering where the temperature was 950 °C. Dilatometry curves showed that the SiC sintered Ni favors more effectively than other carriers alloy analyzed. SiC with average particle size of 15 μm active sintering the alloy more effectively than other SiC used. However, with the chemical and morphological analyzes for all leagues, it was observed that there was dissociation of SiC and Si3N4, as well as diffusion of Si in Ni matrix and carbon cluster and dispersed in the matrix, which also occurred for the alloys with Si carriers and metallic graphite. So the league that was presented better results containing Si Ni with graphite metallic alloy as carriers, since this had dispersed graphite best in the league, reaching the microstructural model proposed, which is necessary for material characteristic of solid lubricant, so how we got the best results when the density and hardness of the alloy

EFFECT of DIFFERENT SOLID AMOUNTS IN THE PHYSICAL and MICROSCOPICAL PROPERTIES of SiC POROUS CERAMICS

The presence of pores in ceramics is directly related to the chosen forming process. So, in the starch consolidation method, the ceramics show, after burning, pores with morphology similar to that presented by this organic material. on the other hand, the increase in solid load leads up to alterations in dispersion viscosity, increasing the thermal stresses during drying and sintering processes. In order to verify the solid percentage influence in ceramic final properties, samples were prepared with silicon carbide in different compositions using or not starch as binder agent and pore forming element. The characterization of the ceramic pieces was performed by superficial roughness measurements, porosity besides by optical and scanning electron microscopy. The results showed ceramics with SiC and starch presented physical and microscopic properties slightly higher in relation to those with only ceramic powder in their composition. The presence of organic material, agglomerated and foam during the forming were essential for the final properties of the studied samples.

Desenvolvimento e implantação de um sistema de gestão de pedidos de informação endereçados à Universidade Federal do Rio Grande do Norte a partir do serviço de informações ao cidadão (E-SIC)

Among the numerous policy changes that the world has experienced in recent years, occupies a prominent place in the quest for greater transparency of public agencies. Transparency has been an important tool in the accountability of the State to promote greater participation of the society by providing information that was previously restricted knowledge of public agencies. Brazil, following this trend, promulgated in May 2012 the Access to Information Act that seeks to disclose the actions of the State at all levels, in all public administration agencies. On the same day of the enactment of the law is provided society with a site that is empowering citizens to make their requests for information to government agencies. The Federal University of Rio Grande do Norte, which at that time had no a tool to assist them in managing this demand. This project has the objective to describe, build and implement a solution to solve this problem using Design Science Research as methodology. As result, the solution built in this research became a new module of the institution s ERP became it capable to control the entire process, and will be helpful to others partners which use our system ERP

Comparative degradation of ZnO- and SnO(2)-based polycrystalline non-ohmic devices by current pulse stress

The degradation behaviour of SnO(2)-based varistors (SCNCr) due to current pulses (8/20 mu s) is reported here for the first time in comparison with the ZnO-based commercial varistors (ZnO). Puncturing and/or cracking failures were observed in ZnO-based varistors possessing inferior thermo-mechanical properties in comparison with that found in a SCNCr system free of failures. Both systems presented electric degradation related to the increase in the leakage current and decrease in the electric breakdown field, non-linear coefficient and average value of the potential barrier height. However, it was found that a more severe degradation occurred in the ZnO-based varistors concerning their non-ohmic behaviour, while in the SCNCr system, a strong non-ohmic behaviour remained after the degradation. These results indicate that the degradation in the metal oxide varistors is controlled by a defect diffusion process whose rate depends on the mobility, the concentration of meta-stable defects and the amount of electrically active interfaces. The improved behaviour of the SCNCr system is then inferred to be associated with the higher amount of electrically active interfaces (85%) and to a higher energy necessary to activate the diffusion of the specific defects.

Evaluation of the effect of the stoichiometric ratio of Ca/Cu on the electrical and microstructural properties of the CaCu3Ti4O12 polycrystalline system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)