Demokraatit tienhaarassa 1972

Kirjallisuusarvostelu

Pequisas físicas e químicas do sistema hidrográfico da região lagunar de Cananéia: I - Cursos de águas

The present elaboration is a "previous note" about two watercourses, Maria Rodrigues and Baguaçú, belonging to Hydrografic System of the Cananeas Lagoon Region in the Southern Part of it he Coast of the Estado de São Paulo, Brazil, which is the objete of our physical and chemical researches. It is based on the first results obtained from our contact with that region, ttfie studies of which are being continued and will still have to confirm or not the previous conclusions, which we are presenting in this "provisional paper". We studied the Maria Rodrigues and the Baguacu under the discussion whether they are to be clasified as a river in the poper sense ot the word or waUer-courses of any other origin. For this purpose we established observatory-stations along their whole course where we collected quantities of water to be analised. The data included in the table nº 1 and 2 refer to the physical and chemical properties of these portions of water. These physical and chemical properties were discussed and compared one with the other according to the observatory-stations, at the same moment and the tide predominating on that occasion. The physical and chemical datas were obtained according to the norms recommended by the Conseil International permanent pour l'Exploration de la Mer, Copenhague. We also presented a sketch of both; we described their relations with regard to the Mar de Cananéia; we inserted comprehensible histograms of the distribution of the observatory-stations, each of them with the respective indices, and at last we tried to correlate the occurrence of the "plancton" with the physical and chemical properties of water as well in the Maria Rodrigues as in the Baguacú. From these researches result the following previous conclusions: 1 - By the data obtained up to now nothing could be formulated as to a cyclical or "seasonal" aspect. 2 - By the comparison of the phenomena which present the rivers in the proper sense of the word and those observed in the Maria Rodrigues and the Baguacú, we are convinced that both are water-courses of the classical type "marigot,". 3 - Their channels are maintained open by the effect of the tide and, more perphaps, by the infiltration-water deriving from the underground-water level owing to the type of the soil of that region, which in mean shows an elevation of 2-4 meters over sea-level. 4 - From tables 1 and 2 and histograms 2 and 3 we stated that the water, not only of the Maria Rodrigues but also of the Baguacú, conserve more or less the same physical and chemical properties, provided that: 1) the localities to be compared are the mouths or equidistant points from them in the lower course, and 2) the moment and tide must be the same. Tables 3a and 3b show sufficiently this supposition.

Magnetic, thermal and spectral behaviour of 3-chloro-2-nitrobenzoates of Co(II), Ni(II), and Cu(II)

Physico-chemical properties of 3-chloro-2-nitrobenzoates of Co(II), Ni(II) and Cu(II) were synthesized and studied. The complexes were obtained as mono- and dihydrates with a metal ion to ligand ratio of 1 : 2. All analysed 3-chloro-2-nitrobenzoates are polycrystalline compounds with colours depending on the central ions: pink for Co(II), green for Ni(II) and blue for Cu(II) complexes. Their thermal decomposition was studied in the range of 293 ­ 523 K, because it was found that on heating in air above 523 K 3-chloro-2-nitrobenzoates decompose explosively. Hydrated complexes lose crystallization water molecules in one step and anhydrous compounds are formed. The final products of their decomposition are the oxides of the respective transition metals. From the results it appears that during dehydration process no transformation of nitro group to nitrite takes place. The solubilities of analysed complexes in water at 293 K are of the order of 10-4 ­ 10-2 mol / dm³. The magnetic moment values of Co2+, Ni2+ and Cu2+ ions in 3-chloro-2-nitrobenzoates experimentally determined at 76 ­ 303 K change from 3.67µB to 4.61µB for Co(II) complex, from 2.15µB to 2.87µB for Ni(II) 3-chloro-2-nitrobenzoate and from 0.26µB to 1.39µB for Cu(II) complex. 3-Chloro-2-nitrobenzoates of Co(II) and Ni(II) follow the Curie-Weiss law. Complex of Cu(II) forms dimer.

Synthesis and magnetic properties of heteronuclear 3d-4f compound

A novel heteronuclear 3d-4f compound having formula NdCu3L3·13H2O (where H3L = Schiff base derived from 5-bromosalicylaldehyde and glycylglycine and L³ = C11H8 N2O4Br) was obtained. It was characterized by elemental and thermal analyses and magnetic measurements. The Cu(II)-Nd(III) compound is stable up to 323 K. During dehydration process the water molecules are lost in two stages. The magnetic susceptibility data for this complex change with temperature according to the Curie-Weiss law with theta = -35 K. The magnetic moment values decrease from 5.00µB at 303 K to 4.38µB at 76 K.

Complexes of 3,4-dimethoxybenzoic acid anion with Cu(II), Co(II), La(III), and Nd(III)

Physico-chemical properties of 3,4-dimethoxybenzoates of Co(II), Cu(II), La(III) and Nd(III) were studied. The complexes were obtained as hydrated or anhydrous polycrystalline solids with a metal ion-ligand mole ratio of 1 : 2 for divalent ions and of 1 : 3 in the case of trivalent cations. Their colours depend on the kind of central ion: pink for Co(II) complex, blue for Cu(II), white for La(III) and violet for Nd(III) complexes. The carboxylate groups in these compounds are monodentate, bidentate bridging or chelating and tridentate ligands. Their thermal decomposition was studied in the range of 293-1173 K. Hydrated complexes lose crystallization water molecules in one step and form anhydrous compounds, that next decompose to the oxides of respective metals. 3,4 - Dimethoxybenzoates of Co(II) is directly decomposed to the appropriate oxide and that of Nd(III) is also ultimately decomposed to its oxide but with the intemediate formation of Nd2O2CO3.. The magnetic moment values of 3,4-dimethoxybenzoates determined in the range of 76-303 K change from 4.22 µB to 4.61 µB for Co(II) complex , from 0.49 µB to 1.17 µB for Cu(II) complex , and from 2.69 µB to 3.15 µB for Nd(III) complex.

Voimalaitoksen käytönaikaisen optimoinnin määrittely

Tässä diplomityössä määritellään biopolttoainetta käyttävän voimalaitoksen käytönaikainen tuotannon optimointimenetelmä. Määrittelytyö liittyy MW Powerin MultiPower CHP –voimalaitoskonseptin jatkokehitysprojektiin. Erilaisten olemassa olevien optimointitapojen joukosta valitaan tarkoitukseen sopiva, laitosmalliin ja kustannusfunktioon perustuva menetelmä, jonka tulokset viedään automaatiojärjestelmään PID-säätimien asetusarvojen muodossa. Prosessin mittaustulosten avulla lasketaan laitoksen energia- ja massataseet, joiden tuloksia käytetään seuraavan optimointihetken lähtötietoina. Optimoinnin kohdefunktio on kustannusfunktio, jonka termit ovat voimalaitoksen käytöstä aiheutuvia tuottoja ja kustannuksia. Prosessia optimoidaan säätimille annetut raja-arvot huomioiden niin, että kokonaiskate maksimoituu. Kun laitokselle kertyy käyttöikää ja historiadataa, voidaan prosessin optimointia nopeuttaa hakemalla tilastollisesti historiadatasta nykytilanteen olosuhteita vastaava hetki. Kyseisen historian hetken katetta verrataan kustannusfunktion optimoinnista saatuun katteeseen. Paremman katteen antavan menetelmän laskemat asetusarvot otetaan käyttöön prosessin ohjausta varten. Mikäli kustannusfunktion laskenta eikä historiadatan perusteella tehty haku anna paranevaa katetta, niiden laskemia asetusarvoja ei oteta käyttöön. Sen sijaan optimia aletaan hakea deterministisellä optimointialgoritmilla, joka hakee nykyhetken ympäristöstä paremman katteen antavia säätimien asetusarvoja. Säätöjärjestelmä on mahdollista toteuttaa myös tulevaisuutta ennustavana. Työn käytännön osuudessa voimalaitosmalli luodaan kahden eri mallinnusohjelman avulla, joista toisella kuvataan kattilan ja toisella voimalaitosprosessin toimintaa. Mallinnuksen tuloksena saatuja prosessiarvoja hyödynnetään lähtötietoina käyttökatteen laskennassa. Kate lasketaan kustannusfunktion perusteella. Tuotoista suurimmat liittyvät sähkön ja lämmön myyntiin sekä tuotantotukeen, ja suurimmat kustannukset liittyvät investoinnin takaisinmaksuun ja polttoaineen ostoon. Kustannusfunktiolle tehdään herkkyystarkastelu, jossa seurataan katteen muutosta prosessin teknisiä arvoja muutettaessa. Tuloksia vertaillaan referenssivoimalaitoksella suoritettujen verifiointimittausten tuloksiin, ja havaitaan, että tulokset eivät ole täysin yhteneviä. Erot johtuvat sekä mallinnuksen puutteista että mittausten lyhyehköistä tarkasteluajoista. Automatisoidun optimointijärjestelmän käytännön toteutusta alustetaan määrittelemällä käyttöön otettava optimointitapa, siihen liittyvät säätöpiirit ja tarvittavat lähtötiedot. Projektia tullaan jatkamaan järjestelmän ohjelmoinnilla, testauksella ja virityksellä todellisessa voimalaitosympäristössä ja myöhemmin ennustavan säädön toteuttamisella.

Ydinvoimalaitoksen rakentamisen aikainen viranomaistoiminta ja -vaatimukset

Tässä diplomityössä on käsitelty ydinvoimalaitoksen rakentamisprosessin aikaista viran-omaistoimintaa, viranomaisten vaatimuksia sekä rakentamiseen liittyvää riskienhallintaa julkisesti saatavissa olevan materiaalin pohjalta. Ensin on käyty läpi johdannon ja tavoitteiden lisäksi ydinvoiman historiaa ja nykyhetkeä Suomessa. Tämän jälkeen työssä on käsitelty riskienhallintaa sekä siihen liittyvää yleistä teoriaa. Teoria toimii lisätukena viranomaisvaatimusten tarkastelussa sekä niiden toimien ymmärtämisessä. Ennen viranomaisvaatimuksia on tarkasteltu kuitenkin itse viranomaisia, niiden välisiä kytköksiä sekä sitä, mitkä eri viranomaiset vaikuttavat ydinvoimalaitoksen rakentamiseen. Tässä osiossa on tarkasteltu myös politiikan vaikutusta viranomaistoimintaan. Viranomaisten toimintaa ja vaatimuksia käsittelevässä osiossa on käyty läpi yleisesti ydinvoimalaitokseen liittyviin toimituksiin kuuluvat vaatimukset sekä yksityiskohtaisempia vaatimuksia aihealueittain. Tässä osiossa on myös käsitelty esimerkkejä Olkiluoto 3 –projektissa tehdyistä havainnoista ja toteutuneista riskeistä. Tämän jälkeen työssä on tehty tarvittavat johtopäätökset tutkimuskysymyksiin läpikäydyn materiaalin pohjalta. Johtopäätöksissä on myös käsitelty ydinvoimalaitokseen liittyvään toimitukseen sisältyviä riskejä sekä niiden hallintaa. Viranomaistyöstä korostuivat läpikäydyssä materiaalissa erityisesti suomalaisen viranomaistoiminnan tinkimättömyys ja korkea vaatimustaso. Tärkeimmiksi seikoiksi työssä nousivat ydinvoimalaitoksen rakentamiseen olennaisena osana kuuluva korkea turvallisuuskulttuuri sekä sen seurauksena yritysten toimivat johtamisjärjestelmät. Lisäksi hyvin tehty esi- ja perussuunnittelu helpottavat projektin eri osa-alueita. Huomioimalla nämä kolme seikkaa pystytään ydinvoimalaitoksen rakentamisen ja käytön aikaisia riskejä hallitsemaan tehokkaimmalla tavalla.

Is hypoxia a stressor to American bullfrog tadpoles?

The aim of this study was to evaluate alterations to the physiological profile of cortisol in pro-metamorphose phase tadpoles of Lithobates catesbeianus exposed to hypoxia stressor in a capture experiment and in a crowding experiment. The capture study was performed by the treatments: stress due to individual capture with a hand net, stress due to batch capture with a hand net and stress due to capture by emptying. Three simultaneous replicates was done witch 12 animals were sampled (6 normoxia - immediately blood collection) and 6 hypoxia - blood collection after 15 min of air exposition) in two collection times with 5 days by intervals. The crowding study was performed by the treatments 1 tadpole L-1, 5 tadpoles L-1 and 10 tadpoles L-1. Three simultaneous replicates was done witch 8 animals (4 normoxia and 4 hypoxia) were sampled in the zero moment (ZM) - blood collection before the experiment, 6 animals/treatment (3 normoxia and 3 hypoxia) to 4 and 8 days and 18 animals/treatment (9 normoxia and 9 hypoxia) to 12 days. The average values to plasmatic cortisol varying from 1.7 to 5.1ng mL-1 (capture study) and 1.0 to 4.2ng mL-1 (crowding study). It concludes that the biomarker tested (cortisol) showed no alterations front of the stressor used. Alternatively, a larger response pattern to these stimuli may have been expressed in another level of an unmeasured hormone (corticosterone). And the bullfrog has great ability to adapt to different management compared to other aquatic organisms, which demonstrates the plasticity of these animals.

Bus bar aeolian vibration field tests

Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.

Capacity of an I-beam made of S960 QC based on Eurocode 3

The capacity of beams is a very important factor in the study of durability of structures and structural members. The capacity of a high-strength steel I-beam made of S960 QC was investigated in this study. The investigation included assessment of the service limits and ultimate limits of the steel beam. The thesis was done according to European standards for steel structures, Eurocode 3. An analytical method was used to determine the throat thickness, deformation, elastic and plastic moment capacities as well as the fatigue life of the beam. The results of the analytical method were compared with those obtained by Finite Element Analysis (FEA). Elastic moment capacity obtained by the analytical method was 172 kNm. FEA and the analytical method predicted the maximum lateral-torsional buckling (LTB) capacity in the range of 90-93 kNm and the probability of failure as a result of LTB is estimated to be 50%. The lateral buckling capacity meant that the I-beam can carry a safe load of 300 kN instead of the initial load of 600 kN. The beam is liable to fail shortly after exceeding the elastic moment capacity. Based on results in of the different approaches, it was noted that FEA predicted higher deformation values on the load-deformation curve than the analytical results. However, both FEA and the analytical methods predicted identical results for nominal stress range and moment capacities. Fatigue life was estimated to be in the range of 53000-64000 cycles for bending stress range using crack propagation equation and strength-life approach. As Eurocode 3 is limited to steel grades up to S690, results for S960 must be verified with experimental data and appropriate design rules.

Hinnoittelu ja asiakaskannattavuus johdon laskentatoimessa ja markkinoinnissa

Tässä kandidaatintyössä on tutkittu hinnoittelua ja asiakaskannattavuutta johdon laskentatoimen ja markkinoinnin kirjallisuuksissa. Työn tarkoituksena oli tarkastella näiden alojen välisiä eroja hinnoittelussa ja asiakaskannattavuudessa, sekä osoittaa kuinka niitä käytetään, ja miten kyseiset aiheet linkittyvät toisiinsa. Työ on toteutettu kirjallisuustutkimuksena hyödyntäen painettua kirjallisuutta ja elektronista tiedonhakua. Hinnoittelu eroaa suuresti markkinoinnin ja johdon laskentatoimen kirjallisuuksissa. Johdon laskentatoimi käsittelee nykyhetkeä analysoivia asiakaskannattavuuden mittausmalleja, kun taas markkinointi käsittelee tulevaisuutta analysoivia menetelmiä. Sekä johdon laskentatoimi että markkinointi on kiinnostunut kasvavissa määrin asiakaskannattavuuden analysoimisesta. Hinnoittelu ja asiakaskannattavuus vaikuttavat suoraan toisiinsa. ABC-laskennan avulla voidaan toteuttaa analyyseja tuotekustannuksista ja asiakkaista samanaikaisesti. Tulevaisuudessa näiden aihealueiden ja alojen synergiaa parantamalla yritykset pystyisivät kehittämään kannattavuuttaan suuresti.

Analytic evaluation of three-phase short circuit demagnetization and hysteresis loss risk in rotor-surface-magnet Permanent-Magnet Synchronous Machines

Permanent magnet synchronous machines (PMSM) have become widely used in applications because of high efficiency compared to synchronous machines with exciting winding or to induction motors. This feature of PMSM is achieved through the using the permanent magnets (PM) as the main excitation source. The magnetic properties of the PM have significant influence on all the PMSM characteristics. Recent observations of the PM material properties when used in rotating machines revealed that in all PMSMs the magnets do not necessarily operate in the second quadrant of the demagnetization curve which makes the magnets prone to hysteresis losses. Moreover, still no good analytical approach has not been derived for the magnetic flux density distribution along the PM during the different short circuits faults. The main task of this thesis is to derive simple analytical tool which can predict magnetic flux density distribution along the rotor-surface mounted PM in two cases: during normal operating mode and in the worst moment of time from the PM’s point of view of the three phase symmetrical short circuit. The surface mounted PMSMs were selected because of their prevalence and relatively simple construction. The proposed model is based on the combination of two theories: the theory of the magnetic circuit and space vector theory. The comparison of the results in case of the normal operating mode obtained from finite element software with the results calculated with the proposed model shows good accuracy of model in the parts of the PM which are most of all prone to hysteresis losses. The comparison of the results for three phase symmetrical short circuit revealed significant inaccuracy of the proposed model compared with results from finite element software. The analysis of the inaccuracy reasons was provided. The impact on the model of the Carter factor theory and assumption that air have permeability of the PM were analyzed. The propositions for the further model development are presented.

Properties of NaxCoO2 /

Polycrysttdline samples of NaiCoOa were prepared using the "Rapid heat-up" method. One set of samples was annealed in flowing O2, while the other set in flowing Argon. X-Ray diffraction measurements indicated a stable phase of Nao.7Co02 mixed with C03O4 for all the samples even though they differed in concentration of Na. Argon annealed samples were insulators, whereas the ones annealed in O2 were metallic. Most of the measurements were performed on the sample Nao.7Co02, because it is the host compound for the superconductor sample Nao.35Co02-H20. Magnetization measurement showed that the magnetic moment decreased with increasing sodium concentration. This is due to the existence of C03O4 in samples with Na^ 0.7. As sodium concentration decreases, the magnetic moment increases due to the increasing concentration of C03O4 and its large magnetic moment. Magnetization measurements showed that the magnetic moment of Nao.7Co02 is field-dependent in low fields eind field-independent in fields higher than 100 G. Resistivity changes with temperature (dp/dT) increased with increasing Na concentration. Also resistivity measurements were performed under different hydrostatic pressures on Nao.7Co02. Two transitions were observed; one at a temperature Ti ~20 K and the other at T2 ^280 K, the transition at Ti has a magnetic origin and the one at T2 is a structiural transition. It was noticed that pressure aJfects resistivity of the sample. At higher pressures resistivity changes faster with temperature. Magnetoresistance measurement showed a small change in the resistivity, especially at lower temperatures. A novel layered superconductor Nao.35Co02H20 was prepared using de-intercalation of Na from the host compound Nao.7Co02. FVom the temperature dependence of the magnetization, the superconducting transition temperature and lower critictil field have been estimated as Tc=4.12 K and Hci=66 G, respectively.

Comparison of strength gains over 13 and 26-weeks of resistance training in children

The primary aim of this study was to determine if there were significant strength gains achieved by children participating in the Hamilton Wentworth District School Board Sport Academy Program. The secondary aim was to determine if the children participating in the 26-week program achieved greater gains or if a plateau in strength adaptations occurred following the 13-week session. The tertiary aim was to determine if there were varying levels of response to the training stimulus between grade 7, grade 8 and grade 9 subjects. Ninety-eight (98) subjects completed a13-week RT program. 6RM strength testing of the chest press, seated row and leg press were conducted prior to the program. Subjects were tested following the 13-week training stimulus to determine if strength gains were achieved and to assess the variation in strength adaptations between the groups. Forty seven (47) subjects completed 26 weeks ofRT. Subjects' strength was tested prior to starting the program, at week 13 of the program and at week 26 of the program to determine the variation in adaptation over a 13 week program versus a 26- week RT program. There were significant (pthe sample following 13 weeks ofRT. Strength adaptations were not significantly (pThe 26-week RT program results showed a significant improvement in all strength measures from pre intervention to 13 weeks. From 13 weeks to 26 weeks grade 8 subjects showed significant gains in both the chest press and seated row exercises while grade 9 subjects showed significant gains across the 6RM seated row, chest press, and leg press measures.

Surface effect ferromagnetism in pure and reduced strontium titanate

A room temperature ferromagnetic hysteresis is observed in single crystal strontium titanate substrates as purchased from several manufacturers. It was found that polishing all sides of the substrates removed this observed hysteresis, suggesting that the origin of the ferromagnetic behavior resides on the surface of the substrates. X-ray diffraction and energy dispersive x-ray spectra were measured however they were unable to detect any impurity phases. In similar semiconducting oxides it was previously suggested that ferromagnetism could originate in oxygen vacancies or from disorder within the single crystal. To this end substrates were annealed in both air and vacuum in a range of temperatures (600°C to 1100°G) to both create bulk oxygen vacancies and to heal surface damage. Annealing in vacuum was found to create a measureable number of oxygen vacancies however their creation could not be correlated to the ferromagnetic signal of the substrate. Annealing in air was found to effect the remnant moment of the substrate as well as the width of the x-ray diffraction peaks on the unpolished face, weakly suggesting a relation between surface based disorder and ferromagnetism. Argon ion bombardment was employed to create a layer of surface disorder in the polished crystal, however it was not found to induce ferromagnetism. It was found that acid etching was sufficient to remove the ferromagnetism from as purchased samples and similarly simulated handling with stainless steel tweezers was sufficient to re-create the ferromagnetism. It is suggested that the origin of this ferromagnetism in SrTi03 is surface contaminants (mainly iron).