Sähkömoottorin etäohjausjärjestelmän suunnittelu ja testaus

Tämä kandityön aihe liittyy LUT Energialla lukuvuonna 2012 – 2013 käynnissä olevaan tutkimukseen, jossa tutkitaan sähkömoottorin laakerivirtojen syntyä. Tätä tutkimusta varten tarvittiin sähkömoottorin etäohjausjärjestelmä, jonka avulla tutkimuksessa käytettävän sähkömoottorin käyttäytymistä voitaisiin tutkia erilaisien käyttöprofiileiden funktiona. Tässä kandityössä suunnitellaan ja toteutetaan edellä kuvattu järjestelmä. Toteutuksessa hyödynnetään nykyaikaista automaatiotekniikkaa, joka yhdessä Ethernet-lähiverkkotekniikan kanssa mahdollistaa etäohjauksen. Valmiin etäohjausjärjestelmän avulla käyttäjä pystyy sekä käynnistämään että sammuttamaan sähkömoottorin, ja määrittämään käyttöprofiilin ON- ja OFF-tilojen ajalliset kestot sekä käyntinopeudet.

Application of a Pid+fuzzy controller on the motion control system in machine tools

This work deals with an hybrid PID+fuzzy logic controller applied to control the machine tool biaxial table motions. The non-linear model includes backlash and the axis elasticity. Two PID controllers do the primary table control. A third PID+fuzzy controller has a cross coupled structure whose function is to minimise the trajectory contour errors. Once with the three PID controllers tuned, the system is simulated with and without the third controller. The responses results are plotted and compared to analyse the effectiveness of this hybrid controller over the system. They show that the proposed methodology reduces the contour error in a proportion of 70:1.

A modified contour error controller for a high speed XY table

This article deals with a contour error controller (CEC) applied in a high speed biaxial table. It works simultaneously with the table axes controllers, helping them. In the early stages of the investigation, it was observed that its main problem is imprecision when tracking non-linear contours at high speeds. The objectives of this work are to show that this problem is caused by the lack of exactness of the contour error mathematical model and to propose modifications in it. An additional term is included, resulting in a more accurate value of the contour error, enabling the use of this type of motion controller at higher feedrate. The response results from simulated and experimental tests are compared with those of common PID and non-corrected CEC in order to analyse the effectiveness of this controller over the system. The main conclusions are that the proposed contour error mathematical model is simple, accurate, almost insensible to the feedrate and that a 20:1 reduction of the integral absolute contour error is possible.

Analysis of open CNC architecture for machine tools

The evolution of digital circuit technology, leadind to higher speeds and more reliability allowed the development of machine controllers adapted to new production systems (e.g., Flexible Manufacturing Systems - FMS). Most of the controllers are developed in agreement with the CNC technology of the correspondent machine tool manufacturer. Any alterations or adaptation of their components are not easy to be implemented. The machine designers face up hardware and software restrictions such as lack of interaction among system's elements and impossibility of adding new function. This is due to hardware incompatibility and to software not allowing alterations in the source program. The introduction of open architecture philosophy propitiated the evolution of a new generation of numeric controllers. This brought the conventional CNC technology to the standard IBM - PC microcomputer. As a consequence, the characteristics of the CNC (positioning) and the microcomputer (easy of programming, system configuration, network communication etc) are combined. Some researchers have addressed a flexible structure of software and hardware allowing changes in the hardware basic configuration and all control software levels. In this work, the development of open architecture controllers in the OSACA, OMAC, HOAM-CNC and OSEC architectures is described.

Vapastii ohjelmoitavan automaatioyksikön suunnitteluprosessi

Rakennusautomaatiossa tulee esiin sovelluksia, joissa järjestelmän ohjaus-, säätö- tai valvontaratkaisun toteuttaminen ohjelmoitavilla logiikoilla ei ole riittävän edullista. Tällöin vaihtoehtona on oman laitteen suunnittelu. Työn tavoitteena oli suunnitella ja toteuttaa kustannustehokas CAN-väylään liitettävä vapaasti ohjelmoitava automaatioyksikkö. Suunnittelua ohjasivat asiakkaan laatimat vaatimusmäärittelyt. Niistä laitteen konfigurointimahdollisuudet ja piirilevyn tavoitekoko asettivat suurimmat haasteet laitteen suunnittelulle. Työn tuloksena toteutettiin asiakkaan tarpeisiin soveltuva automaatioyksikkö. Tavoitteisiin päästiin komponenttivalinnoilla ja hyödyntämällä tehokkaasti mikro-ohjaimen integroituja ominaisuuksia. Näiden avulla pystyttiin karsimaan monia yksiköitä, joita tavanomaisesti toteutetaan erilliskomponenteilla. Työssä perehdyttiin sulautetun järjestelmän elektroniikan tuotekehitysprosessiin ideasta prototyyppiin. Samalla on kuvailtu valittuja ratkaisuja sekä suunnittelussa tapahtuneita virheitä ja miten ne on ratkaistu.

Virtual communities : a virtual treasure trove for end-user developers

End-user development is a very common but often largely overlooked phenomenon in information systems research and practice. End-user development means that regular people, the end-users of software, and not professional developers are doing software development. A large number of people are directly or indirectly impacted by the results of these non-professional development activities. The numbers of users performing end-user development activities are difficult to ascertain precisely. But it is very large, and still growing. Computer adoption is growing towards 100% and many new types of computational devices are continually introduced. In addition, other devices not previously programmable are becoming so. This means that, at this very moment, hundreds of millions of people are likely struggling with development problems. Furthermore, software itself is continually being adapted for more flexibility, enabling users to change the behaviour of their software themselves. New software and services are helping to transform users from consumers to producers. Much of this is now found on-line. The problem for the end-user developer is that little of this development is supported by anyone. Often organisations do not notice end-user development and consequently neither provide support for it, nor are equipped to be able to do so. Many end-user developers do not belong to any organisation at all. Also, the end-user development process may be aggravating the problem. End-users are usually not really committed to the development process, which tends to be more iterative and ad hoc. This means support becomes a distant third behind getting the job done and figuring out the development issues to get the job done. Sometimes the software itself may exacerbate the issue by simplifying the development process, deemphasising the difficulty of the task being undertaken. On-line support could be the lifeline the end-user developer needs. Going online one can find all the knowledge one could ever need. However, that does still not help the end-user apply this information or knowledge in practice. A virtual community, through its ability to adopt the end-user’s specific context, could surmount this final obstacle. This thesis explores the concept of end-user development and how it could be supported through on-line sources, in particular virtual communities, which it is argued here, seem to fit the end-user developer’s needs very well. The experiences of real end-user developers and prior literature were used in this process. Emphasis has been on those end-user developers, e.g. small business owners, who may have literally nowhere to turn to for support. Adopting the viewpoint of the end-user developer, the thesis examines the question of how an end-user could use a virtual community effectively, improving the results of the support process. Assuming the common situation where the demand for support outstrips the supply.

Globaalin toimintaympäristön vaikutukset johdon laskentatoimen asiantuntijan työnkuvassa

Tutkimuksen tavoitteena oli selvittää, millaisia globalisaation aiheuttamia vaikutuksia näkyy suomalaisessa johdon laskentatoimessa ja johdon laskentatoimen asiantuntijoiden, eli controllereiden, työnkuvissa. Oli tärkeää selvittää, ovatko kansainväliset tekijät tuoneet jo liiallista haastavuutta controllerin työhön ja odotetaanko heiltä kenties jo liikaa. Teoriaosuudessa tutkittiin johdon laskentatoimea ja controller-toiminnon kehittymistä, sekä controllereilta vaadittavia ominaisuuksia ja piirteitä. Lisäksi globalisaatiota ja sen aiheuttamia vaikutuksia suomalaiseen johdon laskentatoimeen käytiin läpi. Tutkimus oli kvalitatiivinen ja toteutettiin haastattelemalla kahdeksaa suomalaista johdon laskentatoimen asiantuntijaa, jotka työskentelivät kansainvälisissä yhtiöissä useilla eri toimialoilla. Tutkimus osoitti kuinka kansainvälisestä ja laajasta alasta on kyse johdon laskentatoimesta puhuttaessa. Suuri joukko globaaleja tekijöitä vaikuttaa jatkuvasti controllereihin. Näiden luokittelu teemoittain osoittautui haastavaksi tehtäväksi ja on mahdotonta luoda kattava lista kaikista kansainvälisyyden tuomista vaikutuksista. Tärkeää oli havaita, ettei controller-toiminnon laajuutta koeta negatiivisena vaan ennemminkin sopivan haasteellisena asiana ja mielenkiinnon ylläpitäjänä.

Energy and Dynamics of the solar agricultural robot "SolarSprayer"

The main objective of the present study was to design an agricultural robot, which work is based on the generation of the electricity by the solar panel. To achieve the proper operation of the robot according to the assumed working cycle the detailed design of the main equipment was made. By analysing the possible areas of implementation together with developments, the economic forecast was held. As a result a decision about possibility of such device working in agricultural sector was made and the probable topics of the further study were found out.

Optimized Fast-FISH with a-satellite probes: acceleration by microwave activation

It has been shown for several DNA probes that the recently introduced Fast-FISH (fluorescence in situ hybridization) technique is well suited for quantitative microscopy. For highly repetitive DNA probes the hybridization (renaturation) time and the number of subsequent washing steps were reduced considerably by omitting denaturing chemical agents (e.g., formamide). The appropriate hybridization temperature and time allow a clear discrimination between major and minor binding sites by quantitative fluorescence microscopy. The well-defined physical conditions for hybridization permit automatization of the procedure, e.g., by a programmable thermal cycler. Here, we present optimized conditions for a commercially available X-specific a-satellite probe. Highly fluorescent major binding sites were obtained for 74oC hybridization temperature and 60 min hybridization time. They were clearly discriminated from some low fluorescent minor binding sites on metaphase chromosomes as well as in interphase cell nuclei. On average, a total of 3.43 ± 1.59 binding sites were measured in metaphase spreads, and 2.69 ± 1.00 in interphase nuclei. Microwave activation for denaturation and hybridization was tested to accelerate the procedure. The slides with the target material and the hybridization buffer were placed in a standard microwave oven. After denaturation for 20 s at 900 W, hybridization was performed for 4 min at 90 W. The suitability of a microwave oven for Fast-FISH was confirmed by the application to a chromosome 1-specific a-satellite probe. In this case, denaturation was performed at 630 W for 60 s and hybridization at 90 W for 5 min. In all cases, the results were analyzed quantitatively and compared to the results obtained by Fast-FISH. The major binding sites were clearly discriminated by their brightness

Endogenous vasopressin and the central control of heart rate during dynamic exercise

The present article contains a brief review on the role of vasopressinergic projections to the nucleus tractus solitarii in the genesis of reflex bradycardia and in the modulation of heart rate control during exercise. The effects of vasopressin on exercise tachycardia are discussed on the basis of both the endogenous peptide content changes and the heart rate response changes observed during running in sedentary and trained rats. Dynamic exercise caused a specific vasopressin content increase in dorsal and ventral brainstem areas. In accordance, rats pretreated with the peptide or the V1 blocker into the nucleus tractus solitarii showed a significant potentiation or a marked blunting of the exercise tachycardia, respectively, without any change in the pressure response to exercise. It is proposed that the long-descending vasopressinergic pathway to the nucleus tractus solitarii serves as one link between the two main neural controllers of circulation, i.e., the central command and feedback control mechanisms driven by the peripheral receptors. Therefore, vasopressinergic input could contribute to the adjustment of heart rate response (and cardiac output) to the circulatory demand during exercise.

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.

Development of project cash flow forecasting process

Process management refers to improving the key functions of a company. The main functions of the case company - project management, procurement, finance, and human resource - use their own separate systems. The case company is in the process of changing its software. Different functions will use the same system in the future. This software change causes changes in some of the company’s processes. Project cash flow forecasting process is one of the changing processes. Cash flow forecasting ensures the sufficiency of money and prepares for possible changes in the future. This will help to ensure the company’s viability. The purpose of the research is to describe a new project cash flow forecasting process. In addition, the aim is to analyze the impacts of the process change, with regard to the project control department’s workload and resources through the process measurement, and how the impacts take the department’s future operations into account. The research is based on process management. Processes, their descriptions, and the way the process management uses the information, are discussed in the theory part of this research. The theory part is based on literature and articles. Project cash flow and forecasting-related benefits are also discussed. After this, the project cash flow forecasting as-is and to-be processes are described by utilizing information, obtained from the theoretical part, as well as the know-how of the project control department’s personnel. Written descriptions and cross-functional flowcharts are used for descriptions. Process measurement is based on interviews with the personnel – mainly cost controllers and department managers. The process change and the integration of two processes will allow work time for other things, for example, analysis of costs. In addition to the quality of the cash flow information will improve compared to the as-is process. Analyzing the department’s other main processes, department’s roles, and their responsibilities should be checked and redesigned. This way, there will be an opportunity to achieve the best possible efficiency and cost savings.

Indoor NO2 air pollution and lung function of professional cooks

Studies of cooking-generated NO2 effects are rare in occupational epidemiology. In the present study, we evaluated the lung function of professional cooks exposed to NO2 in hospital kitchens. We performed spirometry in 37 cooks working in four hospital kitchens and estimated the predicted FVC, FEV1 and FEF25-75, based on age, sex, race, weight, and height, according to Knudson standards. NO2 measurements were obtained for 4 consecutive days during 4 different periods at 20-day intervals in each kitchen. Measurements were performed inside and outside the kitchens, simultaneously using Palm diffusion tubes. A time/exposure indicator was defined as representative of the cumulative exposure of each cook. No statistically significant effect of NO2 exposure on FVC was found. Each year of work as a cook corresponded to a decrease in predicted FEV1 of 2.5% (P = 0.046) for the group as a whole. When smoking status and asthma were included in the analysis the effect of time/exposure decreased about 10% and lost statistical significance. On predicted FEF25-75, a decrease of 3.5% (P = 0.035) was observed for the same group and the inclusion of controllers for smoking status and asthma did not affect the effects of time/exposure on pulmonary function parameter. After a 10-year period of work as cooks the participants of the study may present decreases in both predicted FEV1 and FEF25-75 that can reach 20 and 30%, respectively. The present study showed small but statistically significant adverse effects of gas stove exposure on the lung function of professional cooks.

Design of automatic control system for the precipitation of bromelain from the extract of pineapple wastes

In this work, bromelain was recovered from ground pineapple stem and rind by means of precipitation with alcohol at low temperature. Bromelain is the name of a group of powerful protein-digesting, or proteolytic, enzymes that are particularly useful for reducing muscle and tissue inflammation and as a digestive aid. Temperature control is crucial to avoid irreversible protein denaturation and consequently to improve the quality of the enzyme recovered. The process was carried out alternatively in two fed-batch pilot tanks: a glass tank and a stainless steel tank. Aliquots containing 100 mL of pineapple aqueous extract were fed into the tank. Inside the jacketed tank, the protein was exposed to unsteady operating conditions during the addition of the precipitating agent (ethanol 99.5%) because the dilution ratio "aqueous extract to ethanol" and heat transfer area changed. The coolant flow rate was manipulated through a variable speed pump. Fine tuned conventional and adaptive PID controllers were on-line implemented using a fieldbus digital control system. The processing performance efficiency was enhanced and so was the quality (enzyme activity) of the product.

Suorituskyvyn mittaus ja controller toimintojen kehittäminen Venäjällä toimivassa yhteisyrityksessä

Tässä työssä tutkittiin kahden suomalaisen yrityksen omistamaa yhteisyritystä Venäjällä. Tavoitteena oli kehittää tasapainotettu mittaristo suorituskyvyn mittaukseen johtamisen tueksi. Lisäksi oli tarve parantaa materiaalinhallintaa kehittämällä controllerin työtä helpottava työkalu, sekä kehittää materiaalinhallinnan prosessia läpinäkyvämmäksi ja suoraviivaisemmaksi. Työ koostuu teoreettisesta ja empiirisestä osuudesta. Teoria koostuu raportoinnista, suorituskyvyn mittauksesta ja materiaalinhallinnan seurannasta. Työssä käytettiin laadullisia menetelmiä ja tutkimustyypiksi valikoitui toimintatutkimus. Teoreettinen aineisto on peräisin julkaisuista ja alan kirjallisuudesta. Empiirinen aineisto kerättiin pääosin haastatteluista, benchmarkkauksesta ja dokumenteista. Työn tuloksena saavutettiin päätavoite, eli kehitettiin Excel – pohjaiset työkalut suorituskyvyn mittaukseen ja materiaalinhallinnan seurantaan. Lisäksi kehitettiin kirjallinen ohjeistus näiden työkalujen käyttöön ja materiaalinhallintaprosessien suoraviivaistamiseksi. Diplomityö helpottaa yrityksen johtamista ja kontrollointia sekä sisäisesti että ulkoisesti omistajanäkökulmasta katsottuna. Venäjällä toimivan ulkomaalaisomisteisen yrityksen seuranta on haastavaa, jossa prosessien toimivuus ja läpinäkyvyys ovat olennaisessa roolissa.